Logo freelancer
Đăng Nhập Đăng Ký
Đăng dự án
KHÁM PHÁ
CAD/CAM
Freelance
Industrial Design
Manufacturing
Product Sourcing
Ảnh bìa hồ sơ
Bạn đang theo dõi
Lỗi khi theo dõi người dùng.
Người dùng này không cho phép người dùng khác theo dõi họ.
Bạn đã theo dõi người dùng này rồi.
Gói thành viên của bạn chị cho phép 0 lượt theo dõi. Hãy nâng cấp lên ở đây.
Bỏ theo dõi thành công
Lỗi khi bỏ theo dõi người dùng.
Bạn đã đề xuất thành công
Lỗi khi đề xuất người dùng.
Đã xảy ra lỗi. Hãy làm mới trang và thử lại.
Đã xác thực email thành công.
Avatar người dùng

Ferhat G.

@vagabond32

0,0
0
0,0
0,0
0%

Designer_36

$35 USD / giờ
・
Cờ của
Turkey (9:36 CH)
・
Đã tham gia vào tháng 4 28, 2014
$35 USD / giờ
・
I am looking forward to being hired by you for all your 3D Modelleme jobs. I have an exquisite blend of experience in the areas of Çizim and Teknik Çizim and so my service will prove to be useful for your projects. I have a distinguished career as a 3D Modelleme Animator and Endüstriyel Tasarım Consultant. I can comfortably handle Çizim, Teknik Çizim and Endüstriyel Tasarım. I also hold experience in Makine Öğrenimi. I am ready to start working on your projects.
Xác thực
Freelancer Industrial Design Engineers Turkey
Xem tất cả về Industrial Design Engineers tại Turkey

Portfolio

Portfolio

12410674
It was designed and manufactured by looking at the samples for the transportation of cross bikes and camping equipment on special orders....
Camper Trailer for 3 Motors Bike
It was designed and manufactured by looking at the samples for the transportation of cross bikes and camping equipment on special orders....
Camper Trailer for 3 Motors Bike
It was designed and manufactured by looking at the samples for the transportation of cross bikes and camping equipment on special orders....
Camper Trailer for 3 Motors Bike
It was designed and manufactured by looking at the samples for the transportation of cross bikes and camping equipment on special orders....
Camper Trailer for 3 Motors Bike
12404969
It is a stacking conveyor belonging to the sanding lines used in chipboard - MDF facilities. The project is ready for manufacturing. If requested, technical drawings can also be prepared for manufacturing.
MDF Stacking Conveyor
It is a stacking conveyor belonging to the sanding lines used in chipboard - MDF facilities. The project is ready for manufacturing. If requested, technical drawings can also be prepared for manufacturing.
MDF Stacking Conveyor
It is a stacking conveyor belonging to the sanding lines used in chipboard - MDF facilities. The project is ready for manufacturing. If requested, technical drawings can also be prepared for manufacturing.
MDF Stacking Conveyor
12360971
IT IS A ROLLER CONVEYOR THAT ALLOWS THE PRODUCTS STACKED IN CHIPBOARD AND MDF FACILITIES TO BE TAKEN BY FORKLIFT. THE PROJECT INCLUDES FULL MANUFACTURING DETAILS.
ROLLER CONVEYOR H=700 - L = 2975
IT IS A ROLLER CONVEYOR THAT ALLOWS THE PRODUCTS STACKED IN CHIPBOARD AND MDF FACILITIES TO BE TAKEN BY FORKLIFT. THE PROJECT INCLUDES FULL MANUFACTURING DETAILS.
ROLLER CONVEYOR H=700 - L = 2975
IT IS A ROLLER CONVEYOR THAT ALLOWS THE PRODUCTS STACKED IN CHIPBOARD AND MDF FACILITIES TO BE TAKEN BY FORKLIFT. THE PROJECT INCLUDES FULL MANUFACTURING DETAILS.
ROLLER CONVEYOR H=700 - L = 2975
12354132
You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.
Auger Flight Forming Machine Mold Design Parametrik Design
You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.
Auger Flight Forming Machine Mold Design Parametrik Design
You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.
Auger Flight Forming Machine Mold Design Parametrik Design
You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.
Auger Flight Forming Machine Mold Design Parametrik Design
You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.
Auger Flight Forming Machine Mold Design Parametrik Design
You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.
Auger Flight Forming Machine Mold Design Parametrik Design
You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.
Auger Flight Forming Machine Mold Design Parametrik Design
You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.
Auger Flight Forming Machine Mold Design Parametrik Design
11167216
DESIGNED AND MANUFACTURED TO INSTALL BRAKE CALIPERS
CALIPER ASSEMBLY STATION
DESIGNED AND MANUFACTURED TO INSTALL BRAKE CALIPERS
CALIPER ASSEMBLY STATION
DESIGNED AND MANUFACTURED TO INSTALL BRAKE CALIPERS
CALIPER ASSEMBLY STATION
11167199
INCREASE PRODUCTION BY ENABLEING THE PRUNING PROCESS BETWEEN THE MEATING AND SPLITTING MACHINE FASTER.
CROPLİNE (LEATHER PRUNING LINE)
INCREASE PRODUCTION BY ENABLEING THE PRUNING PROCESS BETWEEN THE MEATING AND SPLITTING MACHINE FASTER.
CROPLİNE (LEATHER PRUNING LINE)
12410674
It was designed and manufactured by looking at the samples for the transportation of cross bikes and camping equipment on special orders....
Camper Trailer for 3 Motors Bike
It was designed and manufactured by looking at the samples for the transportation of cross bikes and camping equipment on special orders....
Camper Trailer for 3 Motors Bike
It was designed and manufactured by looking at the samples for the transportation of cross bikes and camping equipment on special orders....
Camper Trailer for 3 Motors Bike
It was designed and manufactured by looking at the samples for the transportation of cross bikes and camping equipment on special orders....
Camper Trailer for 3 Motors Bike
12404969
It is a stacking conveyor belonging to the sanding lines used in chipboard - MDF facilities. The project is ready for manufacturing. If requested, technical drawings can also be prepared for manufacturing.
MDF Stacking Conveyor
It is a stacking conveyor belonging to the sanding lines used in chipboard - MDF facilities. The project is ready for manufacturing. If requested, technical drawings can also be prepared for manufacturing.
MDF Stacking Conveyor
It is a stacking conveyor belonging to the sanding lines used in chipboard - MDF facilities. The project is ready for manufacturing. If requested, technical drawings can also be prepared for manufacturing.
MDF Stacking Conveyor
12360971
IT IS A ROLLER CONVEYOR THAT ALLOWS THE PRODUCTS STACKED IN CHIPBOARD AND MDF FACILITIES TO BE TAKEN BY FORKLIFT. THE PROJECT INCLUDES FULL MANUFACTURING DETAILS.
ROLLER CONVEYOR H=700 - L = 2975
IT IS A ROLLER CONVEYOR THAT ALLOWS THE PRODUCTS STACKED IN CHIPBOARD AND MDF FACILITIES TO BE TAKEN BY FORKLIFT. THE PROJECT INCLUDES FULL MANUFACTURING DETAILS.
ROLLER CONVEYOR H=700 - L = 2975
IT IS A ROLLER CONVEYOR THAT ALLOWS THE PRODUCTS STACKED IN CHIPBOARD AND MDF FACILITIES TO BE TAKEN BY FORKLIFT. THE PROJECT INCLUDES FULL MANUFACTURING DETAILS.
ROLLER CONVEYOR H=700 - L = 2975
12354132
You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.
Auger Flight Forming Machine Mold Design Parametrik Design
You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.
Auger Flight Forming Machine Mold Design Parametrik Design
You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.
Auger Flight Forming Machine Mold Design Parametrik Design
You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.
Auger Flight Forming Machine Mold Design Parametrik Design
You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.
Auger Flight Forming Machine Mold Design Parametrik Design
You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.
Auger Flight Forming Machine Mold Design Parametrik Design
You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.
Auger Flight Forming Machine Mold Design Parametrik Design
You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.
Auger Flight Forming Machine Mold Design Parametrik Design
11167216
DESIGNED AND MANUFACTURED TO INSTALL BRAKE CALIPERS
CALIPER ASSEMBLY STATION
DESIGNED AND MANUFACTURED TO INSTALL BRAKE CALIPERS
CALIPER ASSEMBLY STATION
DESIGNED AND MANUFACTURED TO INSTALL BRAKE CALIPERS
CALIPER ASSEMBLY STATION
11167199
INCREASE PRODUCTION BY ENABLEING THE PRUNING PROCESS BETWEEN THE MEATING AND SPLITTING MACHINE FASTER.
CROPLİNE (LEATHER PRUNING LINE)
INCREASE PRODUCTION BY ENABLEING THE PRUNING PROCESS BETWEEN THE MEATING AND SPLITTING MACHINE FASTER.
CROPLİNE (LEATHER PRUNING LINE)
Đã lưu thay đổi
0.0 · 0 Reviews
Nhận xét
Chưa có nhận xét nào để xem ở đây!
Kinh nghiệm
Machine Manufacturing
thg 7, 2004 - thg 9, 2008
•
4 năm, 2 tháng
Kurçelik Makina
thg 7, 2004 - thg 9, 2008
•
4 năm, 2 tháng
Particleboard and MDF plants manufacturing conveyor (Helical conveyors, belt conveyors, chain conveyors, Elevatör v.b.)
thg 7, 2004 - thg 9, 2008
•
4 năm, 2 tháng
automotive
thg 9, 1997 - thg 6, 1998
•
9 tháng
TOFAŞ - FİAT
thg 9, 1997 - thg 6, 1998
•
9 tháng
intern engine production unit Laboratory measurements of the quality of input materials
thg 9, 1997 - thg 6, 1998
•
9 tháng
Học vấn
Selçuk Üniversitesi
2001 - 2005
•
4 năm
75
Cờ của
Turkey
2001 - 2005
•
4 năm
Bằng cấp
Computer Aided Design and Modeling
1998
Union
Computer Aided Design - Drawing - Modeling and creating technical drawings
1998
Đã gửi lời mời thành công!
Cảm ơn bạn! Chúng tôi đã gửi email chứa đường link để bạn lấy tín dụng miễn phí.
Đã xảy ra lỗi trong khi gửi email của bạn. Hãy thử lại.
Logo freelancer Vietnam / Tiếng Việt
Giúp đỡ & Hỗ trợ

Freelancer

Các lĩnh vựcDự ánCuộc thiFreelancerDoanh nghiệp Innovation Challenges Phát triển bằng AIGói thành viênChương trình Freelancer Ưa ThíchQuản lý dự ánViệc làm địa phươngPhoto AnywhereGiới thiệu dự ánAPI cho nhà phát triểnĐăng ký xác thựcỨng dụng desktop

Giới thiệu

Về chúng tôiCách thức hoạt độngBảo mậtNhà đầu tưSơ đồ trangCác câu chuyệnTin tứcĐội ngũGiải thưởngThông cáo báo chíNghề nghiệp

Điều khoản

Chính sách riêng tưĐiều khoản và điều kiệnChính sách bản quyềnQuy tắc ứng xửBiểu phí dịch vụ

Đối tác

Escrow.comLoadshiftWarrior Forum

Ứng dụng

Logo Apple App StoreLogo Google Play
Sao chép vào clipboard thất bại, hãy thử lại sau khi điều chỉnh quyền của bạn.
Đã sao chép vào clipboard.

Người Dùng Đã Đăng Ký

Tổng Số Việc Đã Đăng

Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)

Copyright © 2025 Freelancer Technology Pty Limited (ACN 142 189 759)

Đang tải xem trước
Đã cấp quyền truy cập vị trí.
Phiên đăng nhập của bạn đã hết hạn và bạn đã bị đăng xuất. Hãy đăng nhập lại.