Arduino wirelesscông việc

I'm looking to develop an Arduino-based robotics project with a specific focus on creating an educational robot. This robot will be specifically designed to teach coding. Key Responsibilities: - Design and create a functional robot using Arduino - Implement features that facilitate coding education - Ensure the robot is user-friendly and suitable for educational purposes Ideal Skills: - Proficiency in Arduino programming and robotics - Experience in creating educational tools or robots - Strong understanding of coding principles - Ability to make complex concepts accessible for beginners

...adding a new feature to the design. Key Requirements: - Expertise in AutoCAD - Proficient in 3D modeling and modification - Experience in integrating functional components into designs - Understanding of design principles for feature enhancement - Ability to deliver precise and accurate modifications You will be editing an arduino case to work that needs tosupport #6 - 32 x 1in screws. Also will need to extend the current walls of the case to be able to hold a arduino atmega32u4 leonardo + USB host shield on top. here are the components

...diagram into a professional and clear visual representation of a wireless access point setup. The final design will be a static graphic used for reference, with potential future opportunities for similar designs. Objective: To create a stylized and easy-to-read "Wireless Access Point Diagram." The diagram will follow a specific flow, with labeled components and icons representing mainstream networking equipment. The design must incorporate logos for EERO and Theater Design Company at the top, along with the text "Wireless Access Point Diagram." The diagram should be presented in 4K resolution. Diagram Flow: ISP (Internet Service Provider) Cable Modem ARRIS MODEM Gateway EERO POE GATEWAY EERO POE6 Access Points (Main wireless access ...

This is a specific section of a project to take sensor data to make sounds through a DAW (digital Audio Workstation). I have been successful in using example code for the sensors I currently have purchased. I now need this information to transfer to a PC with minimal latency. I am open to discussion of my current plan, understanding latency reduction and compatibility with common wireless signals is desired. I am so far using C++ or the IDE equivalents as my understanding is this will have the lowest latency. This job is for the task of setting up the BLE architecture for use with the project as a whole, not for full project development. Please include in your budget communication with me asking queries to make sure that my information regarding latency is correct, and whether ther...

I am seeking a skilled writer who can create unique, engaging, and accurate articles for my website focused on the wireless devices and cellular phones niche in the United States. The articles should be tailored towards tech enthusiasts and cover a range of topics including: - New and upcoming smartphones, tablets, and wearable devices - Wireless plans, special options, and discounts - Press releases related to wireless carriers in the United States - Reviews for mobile apps and games The ideal candidate will have a deep understanding of the wireless devices industry, be able to conduct thorough research to ensure the content is accurate and up to date, and have a flair for writing that will engage and inform our tech-savvy audience. Please note, all articles...

Programa para Arduino controlar motores de passo, definir a posição HOME e executar programa.

I'm looking for a designer who can create a unique remote control toy car for me. The car should have a HD camera and LED lights, both controlled via the remote. The transmission range needs to be 60m. Key features include: - An HD camera mounted on the car - LED lights that can be turned on and off via the remote - Wireless Live video feed to display The ideal freelancer for this project would have experience in designing remote control vehicles and integrating custom features. Their skills should include electronic design, remote control systems, and an understanding of transmission range limitations. Ultimately, I want a high-quality, well-designed product that meets my specifications.

Arduino Microcontroller Code for Multi-Floor Lift/Elevator System We are seeking an experienced Arduino developer with prior expertise in designing and implementing multi-floor lift/elevator systems for commercial or professional applications. The ideal candidate should have a **ready-to-use, tested, and proven program** suitable for deployment. Requirements: - Working Code: Must have a functional Arduino program for a multi-floor elevator/lift system. - Experience: Preference will be given to candidates with prior implementation in professional or commercial projects. - Urgency: Immediate availability and readiness to provide the solution on an urgent basis. - Documentation: Clear documentation of the program, including setup and configuration. - Hardware Knowledge:...

...conjunction with an RFID reader and a haptic motor, along with the coding. I believe it is pretty easy to do for most but for the life of me I cannot figure it out- likely trying to overthink it. I have an engineering degree, but it's in a very different field, although I wish I would a have considered this field instead as it seems a lot more fun! The parts I have are: 1. Adafruit Metro Mini 328 V2 - Arduino-Compatible - 5V 16MHz (STEMMA QT / Qwiic) [ID:2590] 2. Adafruit DRV2605L Haptic Motor Controller - STEMMA QT 3. Lithium Ion Polymer Battery - 3.7v 1200mAh 4. PowerBoost 500 Charger - Rechargeable 5V Lipo USB Boost @ 500mA 5. RFID-RC522 I need 1. A diagram connecting the parts - I am using a bread board 2. Coding that would allow the use of the RFID tag to operate the...

I need an Arduino Uno project that regulates the temperature of my smoker at 225 degrees. The control is achieved by either opening or closing the air vents, which are mechanically connected to a robust servo motor with a 70 kg power capacity. Key Requirements: - The control of the air vents should be incremental. That is, the vents should not simply be in an on/off state, but able to be adjusted in small increments to ensure precise temperature control. - A mobile app will serve as the user interface. This will need to allow for easy control and monitoring of the smoker's temperature. Components I Have: - I already have the servo motor for this project. Ideal Skills: - Proficiency with Arduino programming - Experience in creating mobile apps for hardware ...

We are looking for you! At Raff & Batavi...job involves filming volunteer activities with our client at various locations in Columbus, Ohio, USA and sending the videos and photos for editing. Therefore, only recording and photography are needed, no video editing. The activities are half-day. MINIMUM REQUIRED EQUIPMENT - A hybrid camera capable of shooting photos and video in 4K 50fps at 10-bit color. - Lavalier microphone and wireless audio system. - Gimbal WHAT WE NEED - Your fixed rate for 4 hours of work, 8 hours, and per extra hour. We have several projects throughout the year, so we need someone flexible with dates and eager to work on a project to spread awareness of volunteer activities that help the most in need in Columbus. We look forward to hea...

...Skills: - NodeMCU/ESP32 programming - Implementation of fuzzy logic systems - API development and integration with mobile applications - Experience with cameras and image processing First of all, anyone interested should message me privately so we can discuss the details and ensure everything is clear. My Budget is €100 Links:

...experience in PCB design, especially for medical or wearable devices. Knowledge of TENS and ultrasound circuit integration. Familiarity with low-power and compact design principles. Ability to deliver detailed schematic diagrams and simulation reports. Understanding of regulatory requirements for medical electronics (e.g., ISO 13485, IEC 60601-1). Preferred Qualifications: Experience with wireless or IoT-enabled devices. Familiarity with portable or battery-powered devices. Deliverables: Finalized PCB design files (Gerber, BOM, etc.). Simulation results or testing reports. Guidance on prototyping and manufacturing. Additional Information: This is a freelance role with a flexible timeline, but we expect regular updates and collaboration during the design process. Ca...

To transition your scoreboard project from Arduino to Raspberry Pi, you’ll need to interface the 7-segment displays directly with the Raspberry Pi’s GPIO pins, utilizing shift registers to manage the displays efficiently. Here’s a step-by-step guide to assist you: 1. Understand the Current Setup: • Review your existing Arduino-based configuration, noting how the Arduino interfaces with the 7-segment displays and shift registers. 2. Select Appropriate Shift Registers: • The Texas TPIC6B595N shift register is commonly used for such applications. It allows serial input and provides parallel output, enabling control of multiple outputs with limited GPIO pins. 4. Develop the Software: • Programming Language: • Python is a suitabl...

Project Name: Low Voltage Wiring Promotion - "It's Not All Wireless" Objective: Create an eye-catching and informative social media image for Facebook and Instagram to promote Theater Design Company’s low voltage wiring services, emphasizing that not all home theater systems are wireless. Scope of Work: Image Composition: Start with the New Construction Home image (attached). Integrate two boxes of wire (images provided or stock images can be used) to visually represent the wiring aspect. Text Overlay: Add the following text to the design: "It's Not All Wireless" "Contact Theater Design Company for Low Voltage Wiring Today!" Ensure the text is clear and easy to read while maintaining visual balance with the other eleme...

i will do car tracking using the Arduino ide

I'm looking for an expert PCB designer who can redesign my current PCB to incorporate more features, specifically aimed at enhancing its capabilities for a standalone IoT system. Key Requirements: - The PCB should be redesigned to support remote monitoring, data logging, and wireless communication. - It should also be capable of incorporating additional features without compromising the size or durability. Ideal Skills and Experience: - Extensive experience in PCB design and redesign. - Proven track record in designing PCBs for IoT systems. - Strong understanding of incorporating advanced features into PCBs. - Ability to enhance the performance of the PCB while keeping in mind the size and durability.

...Display Product Information: The scanned data will be shown on a user application and a hardware display. Provide Audio Feedback: The hardware will include a speaker for notifications or feedback. Key Requirements Hardware Development Selection and configuration of QR code scanner, display screen, speaker, and Wi-Fi module. Integration of hardware components using platforms like Raspberry Pi, Arduino, or other suitable alternatives. Backend Development Design and implementation of a database to store product information (e.g., MySQL, MongoDB). Development of secure and efficient APIs for data exchange between the hardware, database, and user application. Frontend Development Creation of a user-friendly mobile app (iOS/Android) to display product details in real-time. Development ...

I need a PCB designed and laid out for a medium-sized consumer electronics product. The PCB should be as small as possible - ideally ~50mm x 50mm. Key Requirements: - Design a PCB suitable for consumer electronics...high-quality Gerber files I have prototyped with a breadboard and am now doing the same with a prototype PCB but want to get a proper PCB layout sorted with a gerber so I can get a professionally made up PCB for testing. I have a drawing of all the components and connections (see attached) but no experience of laying out a board. Not entirely sure how many layers I need/etc. Board includes: 1x Arduino Nano ESP32 1x MCP6002 2x 5V switched relays (currently using a pre-made board for this which has some other minor components) 16x resistors 4x capacitors 12x screw wire ...

I'm seeking a programmer to finalize the coding for my two-wheel line follower module, which utilizes an ESP32 S3. This project involves making the module controllable via a mobile app, specifically Dabble or MIT App Inventor. Key requirements: - Completion of the provided code to ensure compatibili...with a Bluetooth-based app. - Implementation of the line-following functionality. - Use of Infrared (IR) sensor for navigation. The project will involve working from a shared schematic and partially completed code. The ideal freelancer will have: - Extensive experience with ESP32 S3 programming. - Proficient in PlatformIO or C++ - Strong coding skills to complete the project efficiently. Note: Arduino ide may not be sufficient for this task therefore esp idf or platformIO ski...

I am seeking an experienced technical writer with a solid understanding of wireless systems, GANs and GNNs, to create a detailed technical manual for my MIMO wireless channel estimation project. The code is already implemented and I will provide it. The main emphasis of the manual should be on the system architecture, complemented by clear explanations of the code and relevant performance metrics. Key Responsibilities: - Write a comprehensive technical manual focusing on the system architecture - Include explanations of the code - Highlight key performance metrics, specifically: - Accuracy of channel estimation - Computational efficiency - Scalability to larger MIMO systems - Create clear flow chart diagrams and graphs from the code Ideal Skills: - Excellent technica...

I'm looking for an expert in MATLAB to create a simulation for a 3-4 Degree of Freedom (DOF) robotic arm. Key Aspects: - The primary purpose of this project is educational, so the simulation should be designed with a focus on teaching and demonstrating robotic arm principles. - The simulation should be accurate in movement. Ideal Skills: - Extensive experience with MATLAB - Background in robotics - Teaching experience or understanding of educational software design Please note that the project may involve some back and forth to ensure the simulation meets educational standards, and your patience and ability to communicate complex concepts simply will be key to our success.

I need a skilled Arduino professional to design a compact, wireless device for me. This device will blink an LED light on a predetermined date, operating on a long-lasting battery. Key Requirements: - The device should be suitable for indoor use. - It needs to be as small and compact as possible. - Experience with Arduino is a must. - Prior work with designing battery-powered devices is preferred. - Knowledge of LED circuitry is desirable. - Understanding of timing mechanisms for the LED blinks. - Ability to ensure efficient power usage for long battery life.

I am looking for a freelancer who can provide me with the Arduino Bluetooth code specifically designed for the Wifi Lora V3. The code should be optimized for performance and reliability. Please include a brief description of the code's functionalities and potential use cases.

I'm looking for an expert in MATLAB to create a simulation for a 3-4 Degree of Freedom (DOF) robotic arm. Key Aspects: - The primary purpose of this project is educational, so the simulation should be designed with a focus on teaching and demonstrating robotic arm principles. - The simulation should be accurate in movement. Ideal Skills: - Extensive experience with MATLAB - Background in robotics - Teaching experience or understanding of educational software design Please note that the project may involve some back and forth to ensure the simulation meets educational standards, and your patience and ability to communicate complex concepts simply will be key to our success.

We have around 80 ESP32 based wireless devices in a center. These devices communicate with our local server which is assigned a static IP. We have a live TCP socket from each of the device to local server. This socket reattempts connection if device doesnt hear from server for 20sec. Everything runs smoothly for a period of time and then suddenly devices start disconnecting and reconnecting to this TCP socket. This goes on for around 1hr or so and then most of the time situation self resolves. If we restart the access point/router we see improvement in the situation but it does recur. During the period of 'reconnections' even HTTP requests from devices to server start to fail. Pings from server to device IP times out too. We can see in access point that the device is stil...

I'm looking for an experienced electronics engineer to design and code a circuit board that can control both analog RGBW LED strips and digital addressable LED strips (like WS2812) using an ESP32. Key Responsibilities: - Design a circuit board compatible with both types ...compatible with both types of LED strips - Code the ESP32 to control the LED strips - Ensure the circuit board can perform static color displays on the LED strips Ideal Skills: - Proficiency in circuit design and coding - Previous experience with ESP32 and LED strip control - Ability to create a robust and efficient circuit board Please note, there is no need for the circuit board to support any wireless control options or music synchronization. The primary focus is on controlling the LED strips to display...

I'm in need of a skilled programmer to develop code for my M5StickC. The device should connect to an Android phone via Bluetooth, wake the phone from sleep, and open specific apps on command. Key Requirements: - Establish Bluetooth connectivity between M5StickC and Android phone - Wake the phone from sleep - Open the ...Bluetooth connectivity between M5StickC and Android phone - Wake the phone from sleep - Open the Messaging and Social Media apps - Execute a specific swipe or tap after opening the app Ideal Skills and Experience: - Proficient in programming M5StickC - Deep understanding of Android's Bluetooth interface - Experience with automating app interactions on Android - Good troubleshooting skills for wireless connections - Creative problem solver Looking forwar...

Need a New Years Flyer AND Banner for Website I'm looking for a designer to create two New Years Sale graphics for me. I need an Instagram Graphic (1080*1080) AND a website banner...our logo. I am also including the a sample flyer and banner from our last years New Years. I would like a different style, please do not duplicate the samples. I will need this in PNG and JPG Looking for a fast turnaround please.

I'm looking for an Arduino expert who can create software to manage 5-8 valves. The software should also control an LCD display to show valve status information. Key Requirements: - Control of 5-8 valves - LCD display interface - Displaying valve status information Ideal Skills: - Proficiency in Arduino programming - Experience with valve control systems - Knowledge in interfacing with LCD displays - Understanding of real-time status monitoring and display

I'm seeking a skilled programme...facilitate automation and control tasks. - Designing a circuit that integrates with various security components. - Enabling wireless communication between the Raspberry Pi and various sensors and cameras. Main Components: - Cameras and video recording: The system should be able to capture footage and potentially stream it. - Sensors and alarms: Integrating motion detectors, door/window sensors, and alarms is crucial. - Remote access and control: The system needs to be controllable and accessible from a remote location. Ideal Skills: - Proficient in Raspberry Pi programming and microcontroller programming. - Experience with circuit design. - Familiarity with wireless sensor communication. - Knowledge in designing home secur...

...an Arduino board for a robotics application. This project is centered around controlling servos. The main focus is on basic position control of these servos based on the data from a flight simulator (X-Plane12) for pitch and roll. Ideal skills and experience for the job include: - Receiving UDP datarefs from X-Plane - Processing the data to send instructions to a board (Arduino) - Proficiency in programming Arduino boards (Python or Arduino) - Experience with flat servos robotics and controlling them with the board - Understanding of basic position control mechanisms - Familiarity with the integration of sensors with Arduino boards I'm looking for a freelancer who can help me bring this project to life. If you have a passion for robotics and a ...

...Android and IOS. 2- the system will need setup for Enter identification code ( 16 caracters) Enter Payment Mode Enter Credit card or debit card information Enter fuel type product restriction. 3- the system will check the GPS position Valide with the gas station GPS position Need valide de position +- 5 meters 4- the system will send string data to the pump controller by internet and wireless . the system will send data to the gas station identification number 5- after checking the pump status, the system will show the pump aviable on screen ( graphic Picture) 6- the customer select the pump click on pump and start 7- the system will send the approval request to the pump controller, the pump controller will pre-authorise the payment card, private card, credit ca...

I need a professional network engineer to assist me in migrating all configurations from my Fortigate 90f to a Fortigate 500E. ...professional network engineer to assist me in migrating all configurations from my Fortigate 90f to a Fortigate 500E. The current firmware of the Fortigate 90f is v6.0.3 build0200 (GA) and the target Fortigate 500E is on firmware v7.4.4. The specific configurations that need to be migrated include: - Firewall rules - VPN settings - User accounts - Policies - Static addresses - Addressing Schemes - Wireless APs settings and configurations - Logging and security options Ideal skills for this job would include: - Extensive experience with Fortigate firewalls particularly - Network engineering - Configuration management - Troubleshooting and problem-solv...

I'm seeking a skilled professional with expertise in IoT development, PCB design, and radio circuit design to assist in the prototyping stage of my project. The primary purpose of the IoT Arduino PCB is to carry out various tasks, including IoT, PCB, and radio circuits. Key Requirements: - Extensive experience in IoT development - Proficient in PCB design - Skilled in radio circuit design - Able to help move project from prototyping to final production - Capable of innovative thinking for diverse task applications Your role will be instrumental in advancing this project. Your skills can help transform this prototype into a successful final product.

I am seeking a professional skilled in Matlab Simulink with experience in designing and simulating robotic arms. The project involves creating a detailed simulation of a robotic arm, and potentially developing it for a specific application in industrial automation, educational purposes, or research and development. The project involves: - Designing a robotic arm in Matlab Simulink Plus Arduino - Simulating its functionalities such as gripping, lifting, and precision movements - Potentially applying it to industrial automation or educational purposes Ideal candidates will have: - Extensive knowledge of Matlab Simulink - Experience in designing and simulating robotic arms - Ability to create detailed simulations and potentially develop them for specific applications

I am seeking a professional skilled in Matlab Simulink with experience in designing and simulating robotic arms. The project involves creating a detailed simulation of a robotic arm, and potentially developing it for a specific application in industrial automation, educational purposes, or research and development. The project involves: - Designing a robotic arm in Matlab Simulink Plus Arduino - Simulating its functionalities such as gripping, lifting, and precision movements - Potentially applying it to industrial automation or educational purposes Ideal candidates will have: - Extensive knowledge of Matlab Simulink - Experience in designing and simulating robotic arms - Ability to create detailed simulations and potentially develop them for specific applications

I am seeking a professional skilled in Matlab Simulink with experience in designing and simulating robotic arms. The project involves creating a detailed simulation of a robotic arm, and potentially developing it for a specific application in industrial automation, educational purposes, or research and development. The project involves: - Designing a robotic arm in Matlab Simulink Plus Arduino - Simulating its functionalities such as gripping, lifting, and precision movements - Potentially applying it to industrial automation or educational purposes Ideal candidates will have: - Extensive knowledge of Matlab Simulink - Experience in designing and simulating robotic arms - Ability to create detailed simulations and potentially develop them for specific applications

Following a power outage, my Aruba 9102 controller APs have ceased broadcasting any SSIDs. Despite various troubleshooting attempts, including rebooting the contro...SSIDs. Despite various troubleshooting attempts, including rebooting the controller and APs, checking SSID settings, and resetting the APs to factory settings, the issue persists. I have full access to the controller’s login credentials and its configuration interface. Skills and Experience Required: - Extensive knowledge of Aruba networking equipment. - Strong troubleshooting skills with wireless networking. - Familiarity with configuring and maintaining Aruba 9102 controllers. - Ability to work efficiently to resolve issues and restore SSID broadcast. Your expertise in resolving this matter would be greatl...

Project Name: Design, Programing and simulation of a 3-4 DOF robotic arm using simulink and arduino Software: Matlab Simscape Hardwares (I Have): 1) arduino mega 2560 r3 2) servor mg90s 3) 1.5v - 6v r300c mini dc motor rpm3500 4) sg90 micro servor motor 9g(360°) 5) dual channel motor driver modul L298N H-bridge 6) jumper wire cable 7) breadboard 8) robotic arm kit 6dof Deadline 2 days $20 nzd

...professional to design, program and simulate a 3-4 Degree of Freedom (DOF) robotic arm using Simulink and Arduino. The primary application and specific tasks for the robotic arm have not been defined yet, and I am open to suggestions based on your expertise. This project will require you to demonstrate creativity and engineering skills in developing a versatile robotic arm. Key Tasks: - Design a 3-4 DOF robotic arm - Program the arm using Arduino - Simulate the arm using Simulink - Suggest and implement potential applications and tasks for the arm - Provide comprehensive documentation of the design and programming process The ideal freelancer for this project should have: - Extensive experience with Arduino and Simulink - A strong background in robotics and mechan...

...professional to design, program and simulate a 3-4 Degree of Freedom (DOF) robotic arm using Simulink and Arduino. The primary application and specific tasks for the robotic arm have not been defined yet, and I am open to suggestions based on your expertise. This project will require you to demonstrate creativity and engineering skills in developing a versatile robotic arm. Key Tasks: - Design a 3-4 DOF robotic arm - Program the arm using Arduino - Simulate the arm using Simulink - Suggest and implement potential applications and tasks for the arm - Provide comprehensive documentation of the design and programming process The ideal freelancer for this project should have: - Extensive experience with Arduino and Simulink - A strong background in robotics and mechan...

...and manufacturing of various devices to design a compact, battery-powered, laser-based alarm system to be used on construction sites. This system will utilise a laser similar to that of a laser level. The device will also need to feature a built in speaker. Key Features: - The system should have adjustable laser length to cater for different security needs on the site ( indoor and outside). - Wireless connectivity is crucial for this system, as it will allow for flexibility and mobility around the construction site. - Once again the system should be designed for outdoor use, withstanding various weather conditions typically found on construction sites. Ideal candidates for this project should have a strong background in designing and manufacturing automated electronic systems...

Hi there I did read your project description and it looks you are looking for an electronics engineer having experience in circuit, PCB layout designing, and microcontrollers coding/firmware development. My name is Engr. Saddam Gul, I am an electronics engineer having 5+ years of experience in circuits designing, PCB layout designing, and embedded system microcontrollers (Arduino, ESP32, FPGA, C2000, STM, and Rpi) coding/firmware development. I have successfully executed numerous complex projects, which you can view in my portfolio as samples. Please feel free to share more details about your project, and don't hesitate to contact me for any further discussions. Thank you Regards Engr. Saddam Gul

I'm in need of a proficient Excel VBA developer to create a high-performance data logger for me. The primary function of this tool is to log data from a wireless barcode scanner, record weight, and convert that weight into quantity. Key Requirements: - The logger must access conversion data from a sheet that could have over 200k lines. - A more efficient version is needed compared to an existing sample I have. The current version is sluggish due to file size. - It should support multiple users on a local network, compiling all results into a single sheet without missing any lines. - The project has a fixed budget, which is not based on hourly rates. Ideal Skills and Experience: - Extensive experience with Excel and VBA, particularly in creating userforms. - Previous work with...

I'm working on an Arduino project that involves various hardware components and I need help with several aspects of it. - Main Goal: The project revolves around both hardware and coding. - Hardware: The project will use sensors, motors, and displays. - Specific Tasks: I need assistance with circuit design and wiring, writing and debugging code, and integrating the hardware components. Ideal skills and experience for this job would include: - Extensive knowledge and experience with Arduino - Proficiency in circuit design - Strong coding skills, especially in Arduino's programming language - Experience with various hardware components like sensors, motors, and displays - Excellent debugging skills - Able to integrate hardware components seamlessly

Help met get NMEA output by a NEO M9N GPS (Sparkfun) parsed by tinygps (serial) so that info looks smooth / nice in the serial output in Arduino. So I want to combine the SFE_UBLOX_GNSS with Tinygps how the simple sketch output/serial is now: $GNRMC,234015.00,A,4852.78123,N,0222.56312,E,0.027,,271224,,,D,V*14 $GNVTG,,T,,M,0.027,N,0.050,K,D*38 $GNGGA,234015.00,4852.78123,N,0222.56312,E,2,12,0.69,2.6,M,45.9,M,,0000*41 $GNGSA,A,3,10,02,17,21,08,32,,,,,,,1.20,0.69,0.99,1*02 $GNGSA,A,3,71,79,65,88,87,80,,,,,,,1.20,0.69,0.99,2*02 $GNGSA,A,3,27,34,30,04,36,06,09,,,,,,1.20,0.69,0.99,3*00 $GNGSA,A,3,28,34,11,16,06,21,,,,,,,1.20,0.69,0.99,4*07 $GPGSV,4,1,13,01,74,289,,02,79,295,37,03,37,229,20,08,33,170,21,1*65 $GPGSV,4,2,13,10,17,056,34,14,23,283,,17,23,312,18,21,77,103,37,1*65 $GPGSV,4,3...

Help met get NMEA output by a NEO M9N GPS (Sparkfun) parsed by tinygps (serial) so that info looks smooth / nice in the serial output in Arduino. So I want to combine the SFE_UBLOX_GNSS with Tinygps how the simple sketch output/serial is now: $GNRMC,234015.00,A,4852.78123,N,0222.56312,E,0.027,,271224,,,D,V*14 $GNVTG,,T,,M,0.027,N,0.050,K,D*38 $GNGGA,234015.00,4852.78123,N,0222.56312,E,2,12,0.69,2.6,M,45.9,M,,0000*41 $GNGSA,A,3,10,02,17,21,08,32,,,,,,,1.20,0.69,0.99,1*02 $GNGSA,A,3,71,79,65,88,87,80,,,,,,,1.20,0.69,0.99,2*02 $GNGSA,A,3,27,34,30,04,36,06,09,,,,,,1.20,0.69,0.99,3*00 $GNGSA,A,3,28,34,11,16,06,21,,,,,,,1.20,0.69,0.99,4*07 $GPGSV,4,1,13,01,74,289,,02,79,295,37,03,37,229,20,08,33,170,21,1*65 $GPGSV,4,2,13,10,17,056,34,14,23,283,,17,23,312,18,21,77,103,37,1*65 $GPGSV,4,3...

I'm looking for a skilled and experienced professional in raspberry pi or Arduino design and programming, with a strong background in home automation projects. Need to design with all components noted in image. Must provide links to purchase items to build working unit. Time Frame: 2 weeks Budget: as low as possible Ideal skills for this project: - Extensive knowledge and experience with raspberry pi or Arduino - Ability to design a user-friendly system - Proficiency in programming and troubleshooting - Creative problem-solving skills Program: Scan barcode and play audio based on barcode Audio can be paused, skip forward or back Led screen shows audio track #, battery life Requirements: ,schematic, PCB design, BOM ,components and website to find these co...

I'm looking for a seasoned profession...This project involves configuring the server to serve static files (HTML, CSS, JS) and handling real-time data updates. Key Responsibilities: - Configure the ESP32 to serve static web content and handle real-time updates. - Enable the ESP32 to process query/response data to a serial device. Skills and Experience Required: - Deep understanding of ESP32 and LILYGO T-SIM7000G. - Proficiency in Arduino IDE. - Previous experience in setting up web servers on ESP32. - Familiarity with AT commands and the manual of the T-SIM7000G. - Ability to configure for real-time data updates. The ideal candidate would have read the manual of the T-SIM700G prior to bidding, as the setup will be based on AT commands. Please ensure you meet these criteria b...