Logo freelancer
Đăng Nhập Đăng Ký
Đăng dự án
KHÁM PHÁ
Arduino
Electronics
Firmware
Microcontroller
PCB Layout
Ảnh bìa hồ sơ
Bạn đang theo dõi
Lỗi khi theo dõi người dùng.
Người dùng này không cho phép người dùng khác theo dõi họ.
Bạn đã theo dõi người dùng này rồi.
Gói thành viên của bạn chị cho phép 0 lượt theo dõi. Hãy nâng cấp lên ở đây.
Bỏ theo dõi thành công
Lỗi khi bỏ theo dõi người dùng.
Bạn đã đề xuất thành công
Lỗi khi đề xuất người dùng.
Đã xảy ra lỗi. Hãy làm mới trang và thử lại.
Đã xác thực email thành công.
Avatar người dùng

Bahtiyar B.

@ElektroNeo

verified-v2.svg
5,0
7
5,0
5,0
100%

Embedded System Developer | PCB Designer

$30 USD / giờ
・
Cờ của
Turkey (3:14 CH)
・
Đã tham gia vào tháng 9 29, 2017
$30 USD / giờ
・
Hi. I am an Electronics Engineer with +5 years of experience in Embedded Firmware and Embedded Systems. ✔ I know C/C++ programming language, especially for embedded firmware. ✔ I can make PCB designs with KiCAD, Eagle, Proteus, EasyEDA, and Altium Designer. ✔ I can make a project with STM32 (STM32CubeIDE), PIC12/16/18/24 (MPLAB X IDE), ESP32 (ESP-IDF or Arduino), ESP8266 (PlatformIO), RP2040(Python or C SDK) and Atmel Microcontrollers (Microchip Studio), Nuvoton (NuEclipse). ✔ I can make simulations with LTspice, Logisim Evolution, and Proteus. ✔ I can make GUI with a Nextion or .NET Framework, ✔ I can rapidly prototype your embedded system. ✔ I can do Arduino programming. ✔ I used these things in my previous projects: UART, I2C, SPI, DMA, ADC, DAC, PWM, EEPROM, MPU6050, BMP180/280, ADXL345, HC-SR04, Joystick, L86 GPS, 7SD, Nokia 5110 Display, LCD Display, Nextion Display, DS1307+, RS485, PCA9685 PWM Module, BLDC Motor Control, BNO055 MPU, Step Motor Control, Servo Motor Control, NRF24L01, NTC Thermistor, HX711 Load Cell.
Xác thực
Đúng thời hạn
100%
Đúng ngân sách
100%
Tỉ lệ chấp nhận
100%
Tỉ lệ thuê lại
9%
Freelancer Electronics Engineers Turkey
Xem tất cả về Electronics Engineers tại Turkey

Portfolio

Portfolio

10900259
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
LED Animation Project
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
10720168
In this project, there is 1 server and multiple client boards. I used an STM32 microcontroller for the server and ESP32 for the client boards. Client boards can be of different types. They can configure via Nextion display. Clients will get data from the sensors and send them to the server when needed. The server has SD Card and it can save data that comes from the client to the SD Card. When the server board will connect to the PC it will send saved data to the PC and then it will get data from the clients and send them directly to the PC. On the PC the app will save those data to an Excel file. Both client-to-server and server-to-PC communications are done with a TCP/IP.
TCP/IP Project
In this project, there is 1 server and multiple client boards. I used an STM32 microcontroller for the server and ESP32 for the client boards. Client boards can be of different types. They can configure via Nextion display. Clients will get data from the sensors and send them to the server when needed. The server has SD Card and it can save data that comes from the client to the SD Card. When the server board will connect to the PC it will send saved data to the PC and then it will get data from the clients and send them directly to the PC. On the PC the app will save those data to an Excel file. Both client-to-server and server-to-PC communications are done with a TCP/IP.
TCP/IP Project
In this project, there is 1 server and multiple client boards. I used an STM32 microcontroller for the server and ESP32 for the client boards. Client boards can be of different types. They can configure via Nextion display. Clients will get data from the sensors and send them to the server when needed. The server has SD Card and it can save data that comes from the client to the SD Card. When the server board will connect to the PC it will send saved data to the PC and then it will get data from the clients and send them directly to the PC. On the PC the app will save those data to an Excel file. Both client-to-server and server-to-PC communications are done with a TCP/IP.
TCP/IP Project
In this project, there is 1 server and multiple client boards. I used an STM32 microcontroller for the server and ESP32 for the client boards. Client boards can be of different types. They can configure via Nextion display. Clients will get data from the sensors and send them to the server when needed. The server has SD Card and it can save data that comes from the client to the SD Card. When the server board will connect to the PC it will send saved data to the PC and then it will get data from the clients and send them directly to the PC. On the PC the app will save those data to an Excel file. Both client-to-server and server-to-PC communications are done with a TCP/IP.
TCP/IP Project
10720146
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
10720122
I can make a machine that can test the strength and elongation of the textile or alternatives. I made mechanical design, circuit design, GUI, and controller firmware. I used ESP32 for the controller.
Tensile Testing Machine
I can make a machine that can test the strength and elongation of the textile or alternatives. I made mechanical design, circuit design, GUI, and controller firmware. I used ESP32 for the controller.
Tensile Testing Machine
I can make a machine that can test the strength and elongation of the textile or alternatives. I made mechanical design, circuit design, GUI, and controller firmware. I used ESP32 for the controller.
Tensile Testing Machine
I can make a machine that can test the strength and elongation of the textile or alternatives. I made mechanical design, circuit design, GUI, and controller firmware. I used ESP32 for the controller.
Tensile Testing Machine
10720107
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
9747894
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
10900259
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
LED Animation Project
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
10720168
In this project, there is 1 server and multiple client boards. I used an STM32 microcontroller for the server and ESP32 for the client boards. Client boards can be of different types. They can configure via Nextion display. Clients will get data from the sensors and send them to the server when needed. The server has SD Card and it can save data that comes from the client to the SD Card. When the server board will connect to the PC it will send saved data to the PC and then it will get data from the clients and send them directly to the PC. On the PC the app will save those data to an Excel file. Both client-to-server and server-to-PC communications are done with a TCP/IP.
TCP/IP Project
In this project, there is 1 server and multiple client boards. I used an STM32 microcontroller for the server and ESP32 for the client boards. Client boards can be of different types. They can configure via Nextion display. Clients will get data from the sensors and send them to the server when needed. The server has SD Card and it can save data that comes from the client to the SD Card. When the server board will connect to the PC it will send saved data to the PC and then it will get data from the clients and send them directly to the PC. On the PC the app will save those data to an Excel file. Both client-to-server and server-to-PC communications are done with a TCP/IP.
TCP/IP Project
In this project, there is 1 server and multiple client boards. I used an STM32 microcontroller for the server and ESP32 for the client boards. Client boards can be of different types. They can configure via Nextion display. Clients will get data from the sensors and send them to the server when needed. The server has SD Card and it can save data that comes from the client to the SD Card. When the server board will connect to the PC it will send saved data to the PC and then it will get data from the clients and send them directly to the PC. On the PC the app will save those data to an Excel file. Both client-to-server and server-to-PC communications are done with a TCP/IP.
TCP/IP Project
In this project, there is 1 server and multiple client boards. I used an STM32 microcontroller for the server and ESP32 for the client boards. Client boards can be of different types. They can configure via Nextion display. Clients will get data from the sensors and send them to the server when needed. The server has SD Card and it can save data that comes from the client to the SD Card. When the server board will connect to the PC it will send saved data to the PC and then it will get data from the clients and send them directly to the PC. On the PC the app will save those data to an Excel file. Both client-to-server and server-to-PC communications are done with a TCP/IP.
TCP/IP Project
10720146
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
10720122
I can make a machine that can test the strength and elongation of the textile or alternatives. I made mechanical design, circuit design, GUI, and controller firmware. I used ESP32 for the controller.
Tensile Testing Machine
I can make a machine that can test the strength and elongation of the textile or alternatives. I made mechanical design, circuit design, GUI, and controller firmware. I used ESP32 for the controller.
Tensile Testing Machine
I can make a machine that can test the strength and elongation of the textile or alternatives. I made mechanical design, circuit design, GUI, and controller firmware. I used ESP32 for the controller.
Tensile Testing Machine
I can make a machine that can test the strength and elongation of the textile or alternatives. I made mechanical design, circuit design, GUI, and controller firmware. I used ESP32 for the controller.
Tensile Testing Machine
10720107
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
9747894
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Đã lưu thay đổi
5.0 · 7 Reviews
Nhận xét
Avatar người dùng
Arduino Firmware for VFD Motor Driver Control • $500 USD
Bahtiyar did great work on my electrical , nextion, vfd motor control project, he designed everything gave full schematic, wrote all the code and was quick and efficient, i would recommend and will likely work with him again. Very please. Thanks again Bahtiyar
David S.
@Steelwerkz
•
Cờ của
Village of Clarkston, United States
•
1 năm trước
Chia sẻ
Avatar người dùng
Bluetooth project using ESP32 with ESP-IDF • €180 EUR
very quick and focused on the project .
Avensys Srl R.
@energa
•
Cờ của
preseglie, Italy
•
1 năm trước
Chia sẻ
G
STM32 Project • $112 CAD
Amazing job done by the guy. I knowledgeable and knows what he is doing. Would hire again.
Rishabh G.
@ghtu597
•
Cờ của
Vancouver, Canada
•
1 năm trước
Chia sẻ
Avatar người dùng
Arduino project - simple circut with switch. Experienced person needed. For a heat pad project (heated clothing) • $80 USD
Great job. Nice to work with you.
Madaco M.
@madasl
•
Cờ của
longport, United States
•
2 năm trước
Chia sẻ
Avatar người dùng
IOS app and PCB Firmware • $3.550 AUD
Was fantastic, will ask him to work on our next project
Craig L.
@kiwioz
•
Cờ của
Melbourne, Australia
•
3 năm trước
Chia sẻ
Học vấn
Bursa Technical University
2016 - 2022
•
6 năm
Bachelor Degree
Cờ của
Turkey
2016 - 2022
•
6 năm
Bằng cấp
Professional Certificate
2020
ICAT'20 (International Conference on Advanced Technologies)
I did "Adjustable Neural Stimulator System with Android Application" project.
2020
Scientific Computing with Python
2020
freeCodeCamp
Verify: https://www.freecodecamp.org/certification/elektroneo/scientific-computing-with-python-v7
2020
Chứng chỉ
P
Preferred Freelancer Program SLA
Đã gửi lời mời thành công!
Cảm ơn bạn! Chúng tôi đã gửi email chứa đường link để bạn lấy tín dụng miễn phí.
Đã xảy ra lỗi trong khi gửi email của bạn. Hãy thử lại.
Logo freelancer Vietnam / Tiếng Việt
Giúp đỡ & Hỗ trợ
Freelancer
Các lĩnh vựcDự ánCuộc thiFreelancerDoanh nghiệpPhát triển bằng AIGói thành viênChương trình Freelancer Ưa ThíchQuản lý dự ánViệc làm địa phươngPhoto AnywhereGiới thiệu dự ánAPI cho nhà phát triểnĐăng ký xác thựcỨng dụng desktop
 Giới thiệu
Về chúng tôiCách thức hoạt độngBảo mậtNhà đầu tưSơ đồ trangCác câu chuyệnTin tứcĐội ngũGiải thưởngThông cáo báo chíNghề nghiệp
 Điều khoản
Chính sách riêng tưĐiều khoản và điều kiệnChính sách bản quyềnQuy tắc ứng xửBiểu phí dịch vụ
Đối tác
Escrow.comLoadshiftWarrior Forum
 Ứng dụng
Logo Apple App StoreLogo Google Play
Sao chép vào clipboard thất bại, hãy thử lại sau khi điều chỉnh quyền của bạn.
Đã sao chép vào clipboard.
Người Dùng Đã Đăng Ký Tổng Số Việc Đã Đăng
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2025 Freelancer Technology Pty Limited (ACN 142 189 759)
Đang tải xem trước
Đã cấp quyền truy cập vị trí.
Phiên đăng nhập của bạn đã hết hạn và bạn đã bị đăng xuất. Hãy đăng nhập lại.