Kĩ thuật điện Jobs

I am seeking a highly skilled Technical Report Writer with experience in FPGA development, PCB design, and electronic hardware integration to document a comprehensive report on the LVDS to MIPI CSI-2 video stream conversion project.

I need a solution to convert infrared signals from my BroadLink RM4 remote into Bluetooth signals that can be sent to my Hotwire Fision set-top box. Ideal Skills and Experience: - Proficiency in working with infrared and Bluetooth technology - Experience with BroadLink devices - Understanding of signal conversion and transmission - Problem-solving skills to identify and implement the best solution Please note, I'm not certain about the specific format of the infrared signals, so flexibility and a broad understanding of infrared signal formats would be beneficial.

Project Description I need a professional hardware/electronics designer to create a complete ESP32-S3-based pcb. The design will feature: - ESP32-S3 module (placed on edge side of the PCB) with USB-C for programming. - 18 high-resolution analog inputs for NTC 10K/20K/100K sensors with shared COM pins. - 8 solid-state relay (SSR) outputs for controlling contactor signals, with shared COM pins. - One high-reliability 0-10V analog output. - Ethernet port with the W5500 IC and RJ45 connector at the bottom edge. - Integration of an external RTC module (DS3231) with battery backup for accurate timekeeping. - Power regulation, protection circuits, and optimized PCB design. - Milled slits for isolating I2C sensors.

I need a control system for single-phase DC or AC channel modules using Plecs. The focus is on efficiency and performance, using techniques such as: - Droop Control - Single-phase dq Control - Grid-forming and Grid-following AC Channel Module Control - Conversion into C code The project will begin with a model in Plecs, with the potential for future expansion. Ideal skills include: - Proficiency in Plecs for building models - Strong understanding of control systems and techniques - Experience with single-phase DC and AC modules - Ability to prioritize efficiency and performance in design

I'm looking for a skilled engineer with experience in Altera FPGA and electronics to develop a smart automatic door lock system. The system should use an electronic strike solenoid lock and operate based on a 4x3 keypad input. Key project requirements: - The lock should open when a correct passcode is entered. There will be three different passcodes programmed into the system. - If the user fails to enter the correct password after three tries, the system should implement a 20-second cooldown period before allowing attempts to restart. - A display screen should provide feedback when the correct passcode is entered. You will also need to provide guidance on how to connect the GPIO pins of the Altera DE0 Nanobot to a servo motor to simulate the door opening. The ideal candidate for th...

I need a seasoned PCB designer to create a personal navigation device using an ESP32-S3. The low-power design will encompass various components such as a GPS, sensors buttons, and connectors. Key Features: - Incorporate ESP32 WROOM S3 and u-blox MAX-M10S GPS with chip antenna - Integrate a Speaker and 5 Pushbuttons - Include a Micro SD Card Slot and USB-C Connector - Have a Barometric Sensor, Accelerometer/Gyro, and Ambient Light Sensor - Implement a LoRA Radio and 4 connectors for battery & peripherals - Support LiPo charging and power management Board Dimensions: Approximately 44mm x 72mm Deliverables: - Altium Designer Schematic - Detailed Parts List (BOM) with supplier information - Altium Designer PCB Layout - Complete Fabrication data (Geber files etc) Key Requireme...

I'm seeking a proficient translator to assist in translating general engineering documents. The ideal candidate should have substantial experience with document translation, particularly within the engineering sector. Please reach out if you can help.

Parameterized Circuit Optimization Hybrid Classical-Quantum Optimization Noise Analysis and Mitigation in Quantum Circuits Reliability Analysis of Semiconductor Devices

I need to design the supercapacitor block in matlab simulation with any supercapacitor data sheet .. Already supercapacitor block is Available. I just need to assign the parameters of the block with data sheet

I'm looking for an experienced circuit designer to create a circuit for a Switching Mode Power Supply (SMPS) aimed at consumer electronics. Key Project Details: - The circuit is specifically for a 24V SMPS. - Power Rating 48 W , 2A - Use the IC DP2281 - Experience in designing circuits for consumer electronics is crucial. - Knowledge and experience working with SMPS circuits is a must. Your expertise in circuit design will be pivotal in ensuring the successful creation of this circuit. I look forward to your bids and hope to find a freelancer who can meet these requirements.

I am looking for a seasoned professional with extensive experience in embedded software development, particularly focused on real-time processing. The primary task will be to develop embedded software for a microcontroller-based device. Ideal skills and experience: - Proficient in embedded software development with a focus on real-time processing. - Extensive experience working with microcontrollers. - Skilled in software testing and configurations. - Background in electrical and mechanical design. Please provide examples of similar projects you've completed.

I'm seeking a seasoned tutor in aerospace systems engineering to help me prepare for an exam. Key areas of focus: - Comprehensive coverage of aerospace engineering concepts - Intensive problem-solving practice Ideal candidate: - Extensive experience in aerospace systems engineering - Proven track record of tutoring advanced students - Exceptional problem-solving skills - Ability to provide practical, hands-on problem-solving scenarios The tutor will be required to help me apply theoretical knowledge to practical problems, in order to enhance my exam readiness and problem-solving ability.

Problem statement : when TXD pin connected to ground and Reset applied or power on reset done on nuvoton 78E052 controller, it does not power up. Now if i remove ground from TXD pin, it power up. Solution expected: 78e052 should power up even TXD pin low. Firmware uploaded using TXD pin and RXD pin ISP mode then above test done after removing serail programmer.

I'm looking for an experienced electronic engineer to modernize the circuit board of a Candlepin Bowling Pinsetter. The primary goal is to update the board and components to a smaller form factor while enhancing the overall efficiency of the system. Key Requirements: - Update the circuit board and components to a smaller, more compact form factor. - Improve the overall efficiency of the circuit board. Ideal Skills: - Expertise in circuit board design and modification. - Experience with consumer electronics. - Strong understanding of efficiency optimization techniques. Prior experience working with industrial control systems, particularly in consumer electronics like a bowling pinsetter, would be highly beneficial. A successful project will lead to a faster, more efficient pin sett...

I need a Logisim expert to design a sequential circuit for me. The circuit should generate the digits in my student ID. Requirements: - Utilize JK Flip-Flops and Counters. - Employ only JK or D-flip-flop and basic gates (AND, OR, XOR, NAND, NOR, XNOR). - The circuit should be able to replicate the digits of my student ID. Ideal skills: - Proficient in using Logisim. - Strong understanding of sequential circuit design. - Able to work with JK Flip-Flops and Counters. - Familiar with basic logic gates. I attached milestone 2 my previous project are going to continue working on it to do milestone 3 This project is primarily for educational purposes, helping me understand the practical application of circuit design. A freelancer with a background in electronics or computer engineering would...

I'm in need of an expert who can design a schematic for an electronic circuit. This is for a consumer electronics device and will include key features like sensor integration and DC motor control. Ideal skills and experience for the job: - Proficiency in electronic circuit design - Experience working with consumer electronics - Knowledge of DC motor control systems - Expertise in sensor integration - Familiarity with schematic design software Please provide examples of similar projects you've completed in your proposal.

I'm looking for a skilled professional who can design and simulate millimetric wave lenses to focus a mm wave radio to short distances of 30 to 100 cm. DETAILS: - The lenses should be placed on a mm wave radio's transceiver horns. The separation of horn center to center is 24.5 mm. - The beams (Tx and Rx) should focus the outgoing and incoming beams to the specified short distances. - Each lens is expected to be several cm (5) in length, and not more than 2 cm in diameter. - The lenses should be designed to be placed adjacent to each other with a thin isolator between them to prevent crosstalk. - The design should recommend the lenses' material. MATERIAL CHARACTERISTICS: - While the specific material characteristics: low losses an well focused beam SOFTWARE: ...

I am in need of a revolutionary charging port that caters to the modern need of 'scattered chargers'. This port should be capable of universal compatibility, allowing it to charge a variety of devices without the need for multiple, separate chargers. It should also support quick charging for efficiency. Key Aspects: - Functionality: The charging port should be designed to eliminate the chaos of scattered chargers, making it easy and efficient to charge devices in one central location. - Compatibility: This port should be able to charge any device, regardless of brand or type. - Quick Charging: The port should support quick charging to meet the fast-paced needs of today's tech users. Ideal Skills: - Product design - Electrical engineering - Knowledge of charging technology...

I need a professional to create * a detailed string diagram lay out and grounding cable diagram layout for a solar project and * calculate the exact meters of 6 mm DC cable, MC4 connectors and grounding cable needed for this layout plan. * a detailed electrical schema for the DC and AC connection based on the inverter and battery manuals + the UK grid norm. * I can supply the .dwg lay out plan for the panels The setup includes two 110 kVA string inverters and two 10 kVA hybrid inverters to feed a 30 kWh battery system. Key details: - Area for installation: 100-500 sq meters - Type of solar panels: 1732 x 1162 x 30 mm - Type of inverter: 2 pcs 110 kVA string inverters and two 10 kVA hybrid inverters - Number of solar panels: 588 pcs panels, 532 pcs on steeldeck and 56 pcs wall mounte...

My project involves troubleshooting an ESP32 Arduino code that integrates with a NEO-8M GPS module. Currently, the GPS data is not appearing on the serial monitor and this issue needs to be rectified. Key Requirements: - Maintain the original code structure and logic while debugging. - Modify the code to output full GPS data (including time and date) to the serial monitor. - Ensure that the GPS coordinates are accurately displayed. Ideal Skills and Experience: - Proficient in Arduino programming, particularly with ESP32. - Experienced with NEO-8M GPS module integration. - Strong debugging skills to identify and fix code issues. - Able to maintain the integrity of the original code structure and logic.

Hi, I have a ESP 32-S3-mini-1-8 user interface programming project in MicroPython that should work with with this screen : I want it to be done with the parallel port. The user interface should send pre-written commands to the DAC 8760 :

Estoy buscando un profesional que me ayude a perfeccionar mi proyecto de LabVIEW. El enfoque se centrará principalmente en: - Optimización del rendimiento: el proyecto actualmente tiene algunos problemas de rendimiento que deben abordarse. - Mejoras de la interfaz de usuario: la interactividad de la interfaz de usuario necesita algunas mejoras. - Monitoreo de datos: esta es una parte crucial del proyecto. Necesito mejorar los controles de usuario y los gráficos en tiempo real para el monitoreo de datos. El profesional independiente ideal para este trabajo sería alguien con amplia experiencia en LabVIEW, particularmente en la optimización del rendimiento y la mejora de la interactividad dentro de la interfaz de usuario. Las habilidades para diseñ...

I need an expert electronics engineer to design a WiFi module for me. Key Requirements: 1. The module must support Wi-Fi standards 802.11b, 802.11g, and 802.11n. 2. It should use UART or SPI as the host interface to enable communication with the host computer. 3. Use a SoC with integrated Wi-Fi and employ Altium Designer to create the electronic schematic diagram. 4. The software architecture should encompass a TCP/IP stack and a UART driver. 5. A detailed explanation of the operating mechanism of the designed system is required. Ideal Candidate: - Proficient in using Altium Designer. - Extensive experience in WiFi module and SoC design. - Strong understanding of Wi-Fi standards. - Capable of designing a comprehensive software architecture. Please provide your proposals if you meet the...

I need a PCB design expert to help me finalize my PCB design for production. The circuit sketches, dimensions, and component lists have already been prepared. Key Requirements: - Adherence to Standard Design Rules: The PCB should follow standard design rules without any high-density or high-frequency considerations. - Single Layer Design: This PCB will be a single layer. - Manual Routing: The PCB design requires manual routing, not auto-routing or a mix of both. Deliverables: - A .Pcb file that is ready for production Ideal Skills: - Proficiency in PCB design software - Experience with manual routing - Strong understanding of standard design rules

I'm looking for a freelancer who can assist me with the simulation of a robotic arm (a simplified 3D model has already been imported) in MATLAB Simscape Multibody. The project involves customizing existing polynomial trajectory blocks to test joint motion. Each of the arm's 13 joints will be equipped with a DC motor control circuit, following a provided schematic. The shoulder, elbow, and wrist joints can move up and down, while the fingers are limited to gripping motions. Start your proposal with AOA and plz keep it short. Key Responsibilities: - Customize existing polynomial trajectory blocks to adjust joint angle limits. - Setup for testing joint angles (q) without considering velocity (qd) or acceleration (qdd). Ideal Skills and Experience: - Proficiency in MATLAB Simscape ...

I'm in need of a skilled mechanical engineer specializing in design and drafting, specifically for prototyping purposes. The ideal freelancer for this project should have: - Extensive experience in design and drafting within the mechanical engineering field - A strong portfolio of successful prototyping projects - Excellent communication skills to understand and execute design specifications Please note that the specific software to be used for this project has not been predetermined. Flexibility and adaptability to different software will be appreciated.

I'm in need of an expert for Finite Element Analysis (FEA) to support the design and development of an ultrasonic transducer. Ideal skills and experience: - Proficient in FEA software - Experience in designing and developing ultrasonic transducers - Knowledgeable in analyzing various material types, particularly metals, plastics, and composites - Capable of conducting stress, thermal, and vibration analyses. Your role will primarily focus on conducting comprehensive stress analysis to ensure the transducer can withstand operational demands. A strong background in working with metals and composites is preferred as these materials are commonly used in transducer construction. Ultimately, we aim to create a robust, high-performance ultrasonic transducer. Please note, FEA for thermal...

I'm looking for a seasoned professional with hands-on experience in both hardware and software aspects of the WM8904 Audio Codec. The goal is to seamlessly integrate this codec with the LPC55S69 NXP Microcontroller for audio playback directed to speakers in a consumer electronics setup. Ideal Skills and Experience: - Profound knowledge of WM8904 Audio Codec - Extensive experience with LPC55S69 NXP Microcontroller - Hardware and Software integration skills - Expertise in audio playback systems for consumer electronics - Familiarity with speaker output systems

I'm seeking a skilled Matlab programmer to develop a GUI that will display the results of a Monte Carlo simulation. The GUI should include field names and a dropdown box to initiate the simulations, as well as to input specific parameters. Key Requirements: - The primary function of the GUI will be to display the results of the simulations. - The results should be displayed as output data from a cost-benefit analysis. - The cost-benefit analysis data should be displayed in both tables and graphs. The ideal freelancer for this project should have extensive experience with Matlab, particularly in creating GUIs and running Monte Carlo simulations. A keen understanding of cost-benefit analysis will be advantageous. Please refer to the supplied image of the desired final product for gui...

I'm looking for an expert in MATLAB and artificial neural networks to help me implement a maximum power point tracking (MPPT) algorithm for a photovoltaic (PV) system. The primary focus will be on maximizing power output using the ANN (Artificial Neural Network) algorithm. Key Requirements: - Deep understanding of ANN and its application in MPPT for PV systems - Expertise in MATLAB - Proven track record of optimizing power output - Experience in developing and implementing algorithms suitable for PV systems Freelancers who can demonstrate their ability to maximize power output with minimal oscillations and a fast response time, while using the ANN algorithm, will be given priority.

I represent a rapidly growing cannabis operation based in New Jersey. We are currently in the process of refining our state-of-the-art cultivation facility to achieve maximum efficiency, sustainability, and yield, and I believe your expertise could play a pivotal role in helping us reach these goals. Our facility includes: Four dedicated flower rooms (15’x29’6” each) equipped with two-tier rolling racks. A comprehensive veg/mother/ cuttings room, essential for maintaining our perpetual harvest cycle. Specialized dry, trim, and storage rooms to streamline post-harvest operations. A strategic layout designed for secured access, ensuring compliance with all regulatory requirements. A break room and nutrient storage area to support our team’s workflow and operational...

I'm looking for a designer who can create a two-way siren system for industrial use. The system must be able to communicate via radio and primarily serve the purpose of emergency alerts. Key Requirements: - 100m Range, - Ability to connect up to 30 devices - Each device has a siren and light - Battery (12v) powered - See on their video you can set the radio number for pairing - Disconnection warning The system will need to be robust enough for an industrial setting and capable of broadcasting emergency alerts. The power source for the sirens will be battery-powered, so considerations should be made for energy efficiency and battery life.

Job will be to program a small capacitive IPS, TFT LCD touch screen controller to a remote 12-channel relay board. UART2: TTL/CMOS. communications. There is software available for the small 2.1 inch touchscreen and menu icons, and to assist in firmware. The relay board would prefer to utilize Raspberry Pi Arduino and use pre-configured circuit board. for 12v relay outputs. The outputs will be controlled by the touch screen controller's selection icons and menu's. The conclusion is to have a circular touchscreen controller with visible picture/icons that will: 1) push to activate an ignition relay. 2) Menu's to activate all additional relays on/off functions with picture icons for each selected choice. Price: $50-100

I need help integrating an AI Coral with a Raspberry Pi Camera Module 3 Noir to a Raspberry Pi 5. The system should be able to detect both static and moving obstacles in various environments, for the primary purpose of enabling autonomous navigation. Ideal candidate should have: - Proficiency in working with AI Coral and Raspberry Pi - Experience with camera modules, specifically the Raspberry Pi Camera Module 3 Noir - Knowledge in developing systems for obstacle detection - Skills in programming for autonomous navigation - Capability to design for both indoor and outdoor use The project involves: - Integrating the hardware components - Programming the system for obstacle detection - Ensuring the system is capable of autonomous navigation - Testing in both indoor and outdoor environment...

I'm working on a digital circuit design project focused on a finite state machine (FSM) for a lock system. I need assistance with the design and implementation using VHDL on a Basys3 FPGA board. Ideal Skills: - Proficiency in VHDL - Experience with digital circuit design - Familiarity with FSMs Key Tasks: - Design a FSM for a lock system - Implement the design using VHDL - Test the design on a Basys3 FPGA board Please provide examples of similar projects you've completed in your proposal.

I'm looking for an expert in HDI grade PCB design for a compact 23mm x 11mm PCB. This design is intended for a consumer electronics device. Key Requirements: - The PCB needs to accommodate various components: Sensors, LEDs, FPGA, and Buffer memory. - Sequential illumination - The design should be suitable for indoor use only. Ideal Skills: - Proficiency in PCB design software. - Experience in designing PCBs for consumer electronics. - Familiarity with the integration of sensors, FPGAs, and buffer memory on PCBs. - Knowledge of HDI grade PCB design. Please provide relevant samples of your past work.

Job Description: We are seeking a skilled Python developer with experience in working with PSS/E and PSCAD models. The main objective is to optimize and simplify existing Python scripts to improve their usability and streamline tasks related to Generator Performance Standard (GPS) compliance and AEMO requirements. Additionally, the freelancer will develop a script or tool that can read and process output files from PSS/E and PSCAD models, specifically working with channels and output data. ________________________________________ Key Responsibilities: Simplify and enhance existing Python scripts for: PSS/E models. PSCAD models. Ensure Python scripts comply with GPS and AEMO requirements. Develop an efficient method or tool to read and process output files from PSS/E and PSCAD mode...

I'm looking for an expert in electrical engineering to design a circuit for a small wind turbine that will power a submersible fountain water pump. The maximum power output of my wind turbine is less than 20 watts. Key Tasks: - Design a circuit that can efficiently harness the wind turbine's power to operate a submersible pump. - Integrate an automatic on/off switch for the fountain water pump into the circuit. Ideal Skills: - Proficiency in circuit design, particularly for renewable energy sources. - Experience working with small wind turbines and submersible pumps. - Ability to design and integrate control systems into electrical circuits. Please ensure you are able to deliver a robust and reliable design, as this will be used to power a fountain in my garden.

I'm in need of a compact, battery-powered camera module and custom built microcontroller designed for eye-tracking. This module should: - Operate in infrared wavelengths - Connect to a small, custom-built microcontroller - Support wireless streaming of the camera feed - Provide 1080p quality video without auto-focus The camera will be situated near the eyes, so size and weight are critical considerations. The wireless communication protocol for this project is Wi-Fi, and the power source is a battery. Ideal candidates will have experience with camera module design, microcontroller integration, and wireless technology. Please note, the primary application for this camera has not been specified yet, so flexibility and adaptability will be key.

I need an advanced ESP32 developer to help me connect a 3.5mm headphone with mic to an ESP32 and turn it into a hands-free device for calls. I have a full working example at the provided Github link. However, this example expects an external DAC or codec. I want to use the internal DAC and ADC and connect to a TRRS adapter. Your guidance and code will be crucial for this project. Working code But this assumes an external dac and adc according to my knowledge I want to use internal one and connect it to the 3.5mm adapter. I need a circuit diagram and code. Key Requirements: - The device must support answering and ending calls. - Expertise in ESP32 development is a must. - Previous experience with Bluetooth and audio processing on ESP32 is a plus. - Ability to provide clear guidance and ...

I'm looking for a specialized, miniature electronic video system designed for real-time microsurgical live streaming. This system should be capable of delivering high-definition video quality with minimal latency. Key Requirements: - The primary purpose of this system is to facilitate real-time microsurgical live streaming. - The system must deliver high-definition video quality. - It should be capable of low-latency streaming, ensuring a smooth viewing experience. Ideal Skills and Experience: - Expertise in designing and developing miniature electronic video systems. - Proficiency in high-definition video streaming technologies. - Experience with systems designed for real-time, live-streaming applications.

I'm seeking a mechanical engineer with electrical knowledge to assist in estimating the length of metal conduits for an industrial project. Your primary responsibility will be to calculate the conduit lengths accurately to facilitate the project's requirements. This task is crucial for ensuring the project's smooth execution and preventing unnecessary delays or complications. Ideal candidates should have: - Extensive experience in mechanical engineering and electrical systems - A strong understanding of industrial projects - Proficiency in calculating conduit lengths - Prior experience working with metal conduits - Ability to provide accurate estimates for project planning - Strong problem-solving skills to address potential challenges

We are seeking a skilled freelancer to help design the schematic PCB circuit diagram and develop the firmware for a Smart Tree Pot device that integrates multiple sensors and displays 70+ expressions on a screen. The device will monitor various environmental factors such as moisture, temperature, light and respond with visual expressions on a display based on the sensor data. The goal of this project is to create a system where the tree pot responds interactively to its environment with a range of dynamic expressions, making the device not just functional but also visually engaging. Project Requirements: 1. PCB Circuit Design: o Design the schematic circuit diagram for the Smart Tree Pot. o Integrate sensors for soil moisture, temperature, light to monitor plant conditions. o Design an...

I'm seeking a patent expert to assist with identifying, creating, and developing patents in the field of power electronics or general electronics. The ideal candidate will have a strong background in both electronics and patent law, with experience in both the Indian and US patent systems. Key Responsibilities: - Conduct comprehensive patent searches - Aid in the creation of potential patents - Assist in the development and refinement of patent applications - Provide guidance on the patent filing process Ideal Skills: - Strong understanding of power electronics or general electronics - Experience with the Indian and US patent systems - Background in patent law - Excellent research and analytical skills Please note, I do not currently have any preliminary research or documentation ...

I'm seeking an experienced professional to design permits for a residential solar system. The design must encompass all components, including solar panels, inverters, and mounting systems. Key Requirements: - Comprehensive design of solar system permits - Inclusion of all necessary components Design Standards: - Must adhere to local building codes - Compliance with the National Electric Code (NEC) is mandatory Ideal skills and experience for the job include: - Extensive knowledge of solar system design - Previous experience with residential solar permits - In-depth understanding of local building codes and the NEC

I'm currently working on my PhD thesis in AI engineering and I need a competent freelancer who can assist me. The specific subfield of AI engineering my thesis is focused on is yet to be decided, so I would appreciate a professional who can help me choose the best one based on current trends and future predictions. Ideal candidates for this project should have: - Extensive knowledge and experience in various subfields of AI engineering. - Strong research skills. - Ability to assist in literature review. - Expertise in experimental design and implementation. - Proficiency in data analysis and interpretation. - Capability to help develop a new algorithm or improve an existing system.

I have some questions and need clarification with the code

I require assistance with a project involving Xilinx ISE Design software version 14.7. The project encompasses a sign calculator and the implementation of LED patterns & seven segment display on the FPGA. Here's a more detailed breakdown of the tasks: - **Sign Calculator Implementation**: - The calculator should support basic arithmetic operations such as addition, subtraction, multiplication, and division. - It should be designed using a combination of combinational and sequential logic using Verilog. - **LED Patterns on FPGA**: - The LED patterns should be generated randomly. - You should have experience in creating dynamic and visually appealing patterns. - **Seven Segment Display on FPGA**: - The project involves configuring a seven segment display on the FPGA. ...

I'm seeking an accomplished aerospace system engineering professional with academic-level experience to assist with my university work. Key Requirements: - Expertise in aerospace and system engineering - Proven experience in research assistance - Strong understanding of literature review, data analysis, and experiment design Your role will primarily involve supporting my research efforts, which may include helping to locate and interpret relevant literature, analyze data, and design experiments. Your assistance will be crucial in helping me to successfully navigate and complete my university coursework and research projects in this field.

I'm in search of a skilled Python developer who can help me convert my MOSFET and IGBT datasheets into energy loss calculations. - Datasheet Format: The datasheets are in PDF format. - Calculation Requirements: I need both conduction and switching losses to be calculated. - Delivery Format: The results should be provided in an Excel file. Ideal candidates for this project will have a strong background in Python programming, experience with energy loss calculations, and the ability to work with PDF datasheets. Knowledge of MOSFET and IGBT components would be an added advantage. Datasheets will be from infenion, st, onsemi. Only serious bidders please.