Rtc arduino pcb kicadcông việc

Mình cần code quản lý và điều khiển thiết bị ESP8266 từ server. Yêu cầu mô tả ở file đính kèm

điều khiển nước trong bình bằng 2 chế độ : - Chế độ 1 : sử dụng cảm biến siêu âm siêu âm chống nước để điều khiển nước theo chiều cao ( <10cm thì bơm chạy . bơm đến khi >40cm thì dừng và van điện từ hoạt động để xả nước ra ) -Chế độ 2 : sử dụng cảm biến mực chất lỏng để điều khiển ( 1 cái gắn bên trên, 1 cái gắn bên dưới ) . bơm nước đến khi cả 2 cảm biến đều có tín hiệu thì van điện từ hoạt động để xả nước ra * điều khiển bằng công tắc xoay 2 vị trí và hiển thị các thông số trên lcd như lưu lượng , chiều cao (khi dùng chế độ 1 ) , cảm biến nào hoạt động ( khi ở chế độ 2 )

Hi Toan L., chào bạn, mình có kinh nghiệm pcb layout, mình được biết bạn có 1 team layout, nếu được mình mong được tham gia vào team của bạn để cùng làm việc và trao dồi thêm , bạn có thể liên hệ với mình để biết thêm thông tin qua zalo 0907271043, chúc bạn nhiều may mắn

Dùng arduino điều khiển động cơ step mở van nóng lạnh thông qua cảm biến nhiệt và nút cài đặt nhiệt độ theo mong muốn

Chào các bạn. Thi thoảng tôi có công việc liên quan đến vẽ mạch PCB 4 lớp. Có sơ đồ nguyên lý, file ảnh mẫu hỗ trợ tối ưu sắp xếp linh kiện. Tôi có thể thuê các bạn vẽ mạch được không? Hãy trao đổi với tôi qua Zalo 0972.266.426. Trân trọng!

Thiết kế mạch điều khiển động cơ bước như trong file mô tả. Sản phẩm là máy tập vận động sử dụng trong dân dụng, yêu cầu sử dụng mạch PCB

Mình hiện tại có 1 hệ cân bằng gồm Arduino, servo, gear, thanh thẳng để banh. Mình đã hoàn thành và chạy tốt. Nhưng yêu cầu thêm là cần phần bản vẽ P&id nữa thôi. Hình bên dưới là bộ điều khiển PID. (nội dung job là so đồ P&ID).

thiết kế và lập trinh mạch arduino giao tiếp điều khiển với module sim

Thiết kế 1 websever để nhận và gửi dữ liệu từ cảm biến esp32. các tín hiệu thông qua mạng wifi hoặc blutooth. Đầu đọc chất lượng nước theo như thông số cảm biến nhưng tín hiệu đưa về là vôn, tín hiệu xuất ra như của cảm ...nước theo như thông số cảm biến nhưng tín hiệu đưa về là vôn, tín hiệu xuất ra như của cảm biến " phần này là cảm biến có sẵn đơn vị, chỉ có đổi đơn vị đầu vào thành vôn". thiết kế mạch EC meter qua chương trình Orcad hoặc Proteus. In mạch EC metter. Cảm biến TDS "EC Metter" ...

Thực hiện sợ đồ, gia công sản phẩm có sẵn, thêm tính năng xoay 180 độ cho sản phẩm nhờ servo!

Tự động hoá nhà nuôi yến. Yêu cầu 1 hệ thống tự động, điều khiển từ xa thông qua kết nối internet, hoạt động trên 1 PC (kết hợp Arduino). - Hệ thống hoạt động trên nguồn điện DC 12v. - Output 3 lines âm thanh độc lập + 3 amplifiers. - Đo nhiệt độ và độ ẩm. Output: DC brushless pump. - Giám sát bằng camera, sensor báo động đột nhập. - 3 ngõ Output khiển tích hợp timer: bơm hơi, đèn, quạt. Bạn thạm gia dự án có thể chọn 2 phương án: giá thầu tổng hoặc chỉ thi công (vật tư dự án cung cấp)

Hi mọi người! Mình đang cần người hợp tác vẽ mạch bằng Altium cụ thể như sau: - Vẽ Layout từ Sch bên mình đã có sẵn - Tạo hình 3D - Vẽ thư viện lib một số linh kiện và module chưa có. Làm việc theo giờ, online hoặc nếu ở HN có thể Offline. Hoặc có thể làm việc tính theo hoàn thành dự án ( tùy dự án). Xin cám ơn !

Sử dụng cánh tay 3D vẽ theo mẫu có sẵn , in 3d Sử dụng Arduino Mega 2560 + Ramps 1.4 shield Hiện đã có mô hình

I'm looking for an intermediate-level video tutorial on how to implement a traffic light control system using an induction loop and an Arduino. The guide should cover: - Utilizing an Arduino Uno - Implementing an Inductive loop sensor - Controlling LED traffic lights This video should be clear, concise, and demonstrate each step in the process. It should be suitable for someone with a basic understanding of Arduino but looking to advance their skills. The ideal freelancer for this project should have experience in creating instructional video content and a strong understanding of Arduino and traffic control systems.

...accelerometers, gyroscopes, and magnetometers. 3. Solar Position Algorithm: Calculates the sun's position (azimuth and elevation) at any given time and location using GPS data. Algorithms like the Solar Position Algorithm (SPA) or similar are used. 4. Control System: A microcontroller or embedded system (e.g., Arduino, Raspberry Pi, or a dedicated PLC) processes data from the GPS and IMU. Computes the optimal panel orientation based on the sun's position and the vehicle's orientation. 5. Actuators: Motors or servos adjust the solar panel's tilt (pitch) and rotation (azimuth) to align with the sun'...

I'm looking for an experienced PCB designer to help design a multi-layer PCB for a consumer electronics device. Key Requirements: - Design a multi-layer PCB that is compact and efficient, suitable for consumer electronics. - Ensure the PCB includes effective power management features. - Experience in designing PCBs for consumer electronics is a plus. - High attention to detail and ability to meet deadlines is crucial.

...programming, specifically with STM32 and Arduino, to help with firmware development, debugging existing code, and designing hardware interfaces. This project will also involve significant hardware design work, so local candidates from Hyderabad, India, or those willing to travel, would be preferred. Key Responsibilities: - Write firmware for both STM32 and Arduino microcontrollers. - Debug existing code to ensure reliable performance. - Design hardware interfaces for various components. The ideal candidate will have: - Proven experience with STM32 and Arduino microcontrollers. - Strong skills in firmware development and code debugging. - Experience designing hardware interfaces. In addition to programming, this project will involve working with Arduino, sp...

I'm seeking a skilled professional to assist with integrating a micro needle patch with PCBs and biosensors. This project primarily focuses on medical diagnostics. Key Requirements: - Expertise in PCB design and integration - Experience working with biosensors - Proficient in developing systems for data transmission to cloud storage The objective is to create a system where the data collected by the biosensors is seamlessly sent to a cloud storage for further analysis. Please reach out if you have the relevant skills and experience. The project is currently in the conceptual stage. The project is expected to be completed in less than 3 months. The system should utilize wireless methods for data transmission. The system should ensure high accuracy for the biosensor readings....

Vui lòng Đăng Ký hoặc Đăng Nhập để xem thông tin.

Vui lòng Đăng Ký hoặc Đăng Nhập để xem thông tin.

...75 teclas. El trabajo que tiene que hacer es proponer un procesador (Arduino, raspberri, etc ) , determinar las conexionas al pcb con la matriz del teclado, programarlo para que lea las teclas y un par de sensores mas y hacer que envie una señal MIDI al reproductor de sonido. Debe tener conocimientos en programación y electrónica. Actualmente, el proyecto está dividido en tres partes: teclado, procesador y reproductor de audio. El teclado cuenta con una disposición particular en matriz de 9x8 con diodos y debe permitir la lectura simultánea de hasta 8 teclas. El diseño del PCB está realizado, pero falta definir el procesador ideal para optimizar su funcionamiento. En cuanto al procesador, se realizaron prueb...

Looking for a skilled engineer to help design an Arduino-based solar tracker with GPS. The primary task is to ensure the system can adjust the solar panel orientation in real-time to maximize solar energy capture. Key Requirements: - Design a system that allows for real-time solar panel orientation tracking. - Ability to integrate with an Arduino board and a GPS module. - Knowledge of solar energy systems and their tracking requirements. - An understanding of the capabilities and limitations of the components at hand (Arduino board and GPS module). The ideal candidate will have previous experience with similar projects and a deep understanding of Arduino programming and solar tracking systems.

I am currently developing a...made some progress on this project and need assistance with the next steps. Current Development: I have created the PCB design using DipTrace, but it currently lacks an antenna that supports GSM and GPS functionality. The components I have used include the A9G chip for GSM/GPS functions and the STM32 chip for the main processing tasks. Requirements: - Design and integrate an embedded PCB antenna onto the smartwatch PCB. - Improve the PCB design for better signal integrity, functionality, and performance. Ideal Skills and Experience: - Proficient with DipTrace and PCB design. - Experience with designing embedded antennas. - Strong understanding of signal integrity and PCB optimization. - Familiarity with GSM and GP...

...Requirements: ✔️ Strong expertise in Keysight Advanced Design System (ADS) ✔️ Ability to train from beginner to advanced levels ✔️ Hands-on training with practical examples and real-world applications ✔️ Experience in RF/microwave circuit design, PCB layout, EM simulation, and system analysis ✔️ Strong communication and teaching skills Training Scope: ✅ Introduction to ADS & UI navigation ✅ Schematic design & simulation ✅ Linear & Nonlinear circuit simulation ✅ Harmonic balance & transient analysis ✅ EM simulation (Momentum & FEM techniques) ✅ RF system design & PCB layout design ✅ Optimization techniques & troubleshooting Training Mode: Online (Zoom/Google Meet) Duration: Flexible (as per the training plan) If you are an experienced ADS trai...

I'm looking for a professional with extensive experience in designing new PCBs. The ideal candidate should have: - Proven experience in PCB design - Proficiency in PCB design software - Knowledge of electronic components - Ability to work with minimal supervision - Excellent problem-solving skills Please note that the application of the PCB and its complexity are yet to be determined, so flexibility and a broad skill set would be a significant advantage.

...re-design a simple small PCB for a prototype toy product. I previously posted this project on Freelancer and the awarded freelancer failed to produce a working design, over complicated it and cost me a lot of money to produce something that did not work. IMPORTANT - the project milestone payment will only be released AFTER a prototype is produced by JLCPCB and confirmed the be working. Therefore please factor this into your project timeline. About the Project: A low-profile USB 2 Type A memory stick is being incorporated into a prototype toy product. It requires a really simple small PCB consisting of: - USB-C socket connector - USB 2 Type A connector - 6 pin edge connector The low-profile memory still will connect to the onboard USB 2 Type 2 socket. The whole PC...

I'm looking for a PCB designer who can take my schematic diagram and convert it into a Gerber file. The project is focused on a small, mixed-signal consumer electronics PCB, and the final product will need to fit within a size of less than 10cm x 10cm. Ideal Skills and Experience: - Proficiency in PCB design software - Experience with mixed-signal components - Prior work in designing PCBs for consumer electronics - Ability to generate Gerber files from schematic diagrams - Understanding of small form factor design constraints

I'm seeking a skilled programmer to write an Arduino code for a BQ25887 Charger 5 click USB charging IC board. The code should manage the initiation of charging for two Lion batteries, ensure cell balancing, and support 5V 3A charging from any standard adapter. I am using a MIKROE Balancer 5 click. () The following features are required: 1. *Charging Control Setup:* - Configure I2C communication with the BQ25887 IC and set parameters for automatic charging initiation. - Define maximum voltage (4.2V per cell) and current (1A per cell) limits. 2. *Temperature-Based Charging Adjustment:* - Monitor the temperature using the NTC pin and adjust the charge current accordingly. - Implement safe temperature thresholds to reduce or

Vui lòng Đăng Ký hoặc Đăng Nhập để xem thông tin.

Hola, Estamos buscando un ingeniero de RF que nos ayude a verificar y validar nuestro circuito antes de convertirlo al formato Gerber para la fabricación de la PCB. Nuestro diseño está hecho en AWR Microwave Studio, por lo que necesitamos a alguien con experiencia en este software. El circuito opera a 2.4 GHz, realiza adaptación de impedancia y filtrado de armónicos, y finalmente alimenta un LED. Ya hemos configurado la activación del LED, pero necesitamos un experto que revise el diseño, asegure que todo funcione correctamente y nos ayude a convertirlo al formato Gerber dentro de AWR. Si tienes experiencia con AWR Microwave Studio, validación de circuitos de RF y conversión a Gerber, ¡nos encantaría sabe...

Hola, Estamos buscando un ingeniero de RF que nos ayude a verificar y validar nuestro circuito antes de convertirlo al formato Gerber para la fabricación de la PCB. Nuestro diseño está hecho en AWR Microwave Studio, por lo que necesitamos a alguien con experiencia en este software. El circuito opera a 2.4 GHz, realiza adaptación de impedancia y filtrado de armónicos, y finalmente alimenta un LED. Ya hemos configurado la activación del LED, pero necesitamos un experto que revise el diseño, asegure que todo funcione correctamente y nos ayude a convertirlo al formato Gerber dentro de AWR. Si tienes experiencia con AWR Microwave Studio, validación de circuitos de RF y conversión a Gerber, ¡nos encantaría sabe...

I'm looking for an experienced PCB designer to create a PCB for an ATmega328 microcontroller. This project is aimed at prototyping, so the design should be robust and reliable. Key Requirements: - Incorporation of Power Regulation Circuitry: The PCB should have an efficient power regulation system to ensure stable operation of the microcontroller and connected components. - Inclusion of Input/Output Headers: The design should feature multiple I/O headers to facilitate easy connection to various peripherals during the prototyping phase. Ideal Skills: - Proficiency in PCB design software (e.g., Altium Designer, Eagle, KiCad). - Strong understanding of microcontroller circuitry, particularly with ATmega328. - Experience in designing PCBs for prototypi...

...microcontroller and implementing the Modbus protocol. The task involves writing code for the ESP32 that can effectively interface with an energy meter. The code should accurately and efficiently read and process data from the meter. Key Responsibilities: - Developing code in the Arduino IDE to control the ESP32. - Implementing Modbus protocol for communication with the energy meter. - Ensuring accurate data handling and communication. Ideal Skills & Experience: - Extensive experience with ESP32 programming, specifically in the Arduino IDE. - Strong understanding and previous experience with Modbus protocol. - Experience with data handling from energy meters is a plus. Please provide relevant examples of your previous projects with your application. Note that the spe...

Hi, We are Remicorp SRL, and we are developing an innovative system for livestock monitoring and tracking using LoRaWAN technology. We have a clear idea and defined requirements for the product, but we need support with the prototype design in Cadence. We are looking for someone with experience in PCB design, LoRaWAN hardware integration, and low-power optimization to help us bring our solution to life in a functional design. If you're interested, we’d love to schedule a call to discuss the details and explore how we can collaborate. Looking forward to your response!

...simulating DDR4, PCIe Gen6 and 25Gbps streams in both Allegro and Altium. Key Requirements: - Expertise in high-speed interface simulations, particularly DDR4, PCIe Gen6, and 25Gbps streams - Proficiency in both Allegro and Altium software - Strong focus on accuracy of signal integrity - Experience with signal integrity analysis tools like HFSS, Keysight ADS, or SIwave - Deep understanding of PCB layout techniques for high-speed digital designs - Experience in simulating and mitigating crosstalk in high-speed designs The primary goal of this project is to ensure the accuracy of signal integrity in these high-speed simulations. Please provide your experience and any relevant project samples in your bid. The expected duration for this project is less than 1 month. Th...

Client requires a comprehensive CAD design in a 3d printable format. the design will be an enclosure for an Adafruit feather M0 with a rechargeable battery and a few other conponents. the design should be approx 60mm x 60mm x 60mm

...correctly interpret it. Minimal Processing Since advanced signal analysis is not required, the software should focus on rapid and efficient data acquisition and transmission, minimizing the delay between data reading and transmission. Code Comments All comments in the source code must be written in English. Deliverables Hardware Design Schematics and PCB layout files for the device. A Bill of Materials (BOM) listing all required components, including the microcontroller (e.g., STM32H), the piezoelectric sensor, the power module, and the FTDI chip. Firmware Complete source code for the microcontroller firmware, including: Initialization and data acquisition from the ADC. Initializ...

...a custom PCB that integrates an Arduino Nano, an L293D motor driver, and connectivity for additional components like servo motors, an ultrasonic sensor, and infrared sensors. The PCB should be compact, efficient, and optimized for easy assembly. SAMPLE layout design attached ( resistor, capacitor and voltage controllers to be added as required ) Project Requirements: Microcontroller: Arduino Nano (ATmega328P) Motor Driver: L293D (Dual H-Bridge) for controlling two DC motors Servo Motor Control: Two male header pins for connecting two servo motors Powered by 5V from the Arduino or external power Sensor Connectivity: One female header (4 pins) for an ultrasonic sensor (HC-SR04) Two male header pins for IR sensors (typically 3-pin each: VCC, GND, OUT) ...

Aquí tienes la versión mejorada con ese detalle incluido: Title: RF Engineer Needed for Circuit Verification and Gerber Conversion in AWR Microwave Studio Hello, We are looking for an RF engineer to help us verify and validate our circuit before converting it to Gerber format for PCB fabrication. Our design is built in AWR Microwave Studio, so we need someone experienced with this software. The circuit operates at 2.4 GHz, performs impedance matching and harmonic filtering, and ultimately powers an LED. We have already configured the LED activation, but we need an expert to review the design, ensure everything works as intended, and assist in converting it to Gerber format within AWR. If you have experience with AWR Microwave Studio, RF circuit validation, and Ger...

...in circuit board design - Expertise in Pic chip processing - Familiarity with micro circuit boards - Proficiency in handling circuit boards for data signals from Pic We had a board that had the effect we are interested in, but we ran out. We are making new stock and we want to modify a few things about it. I have attached an image of our out of stock board. We have the code already, it's in Arduino C but need to be coded to the pic we select. We are looking Pic12F675 at but are open to your suggestions. We need 3 outputs to LEDs with special effects and 1 output that bypasses the circuit where solid LEDs can be attached. There will be 1 input from power and an input from the Rheostat to adjust speed. Here is what it does: Please provide examples of your

I'm in need of a professional PCB designer to create a single-layer PCB tailored for the oil and gas industry, specifically wireline. The primary focus of this job will be ensuring the design can withstand high temperature operation. We already have proven designs that work great in low temperature environments (250F-350F). I am looking for someone who can take the designs we already have and update them to withstand high temperatures (500F+) Ideal Skills and Experience: - Proven experience in PCB design, specifically single-layer PCBs. - Prior work with PCBs for the wireline industry is highly desirable. - Strong understanding of high temperature operation requirements and how to design for them. - Able to deliver designs that meet industry standards for durabil...

I'm facing performance issues with my Arduino server-client application. It currently only processes and sends information to the phone once, instead of looping continuously. Ideal skills and experience for the job: - Expertise in Arduino programming - Experience troubleshooting performance issues - Knowledge of server-client architecture - Able to optimize for speed and scalability - Strong problem-solving skills The main performance issue is the protocol for looping the client data in the app. The application currently uses the WebSocket protocol for server-client communication. The main optimization goal is efficiently reloading new data and maintaining the connection. Please note that there are other constraints to consider: none. Please account for changes on t...

I'm seeking an experienced embedded circuit programmer to develop a microcontroller-based system for interfacing with motion sensors. Key Requirements: - Develop a microcontroller-based system. - Integrate with motion sensors. - Experience in sensor interfacing is crucial. - Knowledge of embedded programming is essential. - Ability to process sensor...Requirements: - Develop a microcontroller-based system. - Integrate with motion sensors. - Experience in sensor interfacing is crucial. - Knowledge of embedded programming is essential. - Ability to process sensor data in real time. An understanding of how to effectively program, interface and communicate with motion sensors is vital for the success of this project. The system should be developed using Arduino as the microcontr...

Description: We are looking for a skilled hardware developer to create a specialized hardware module featuring two cameras: one Infrared (IR) camera and one RGB camera. The primary goal of this module is to enable face recognition functionalities. Requirements: Develop a hardware module that supports USB connectivity for seamless integration with Android devices. The module must utilize Android's USB Video Class (UVC) to allow live streaming and camera feed from both IR and RGB cameras. Candidates may either reverse engineer a standard camera module or design a new module from scratch to meet the project specifications. Goal: The end objective is to effectively capture live streams from both the IR and RGB cameras for face recognition applications. If you have the expertise and c...

Potrzebuję prostego połączenia Arduino Uno r4 Wifi z bazą danych, aby np. zapisywało sie w tabelach właczenie i wyłączenie diody. Zpis musi byc bezpośrednio do SQL

...experienced PCB designer who can design a custom PCB for me based on a provided sample PCB. Key Details: - The PCB must adhere to specific dimensions (e.g. 100mm x 50mm). - The primary function of the PCB has not been specified, so flexibility and versatility in design are key. - The PCB should be designed with potential connectors and interfaces in mind, although specific types (like USB, HDMI, Ethernet) have not been pre-determined. Ideal candidates for this project should have: - Extensive experience in PCB design, especially designing based on sample reference PCBs. - Ability to work with specific size constraints. - Creative problem-solving skills to design for an unspecified primary function. - Knowledge of various connectors and...

...experienced PCB designer who can design a custom PCB for me based on a provided sample PCB. Key Details: - The PCB must adhere to specific dimensions (e.g. 100mm x 50mm). - The primary function of the PCB has not been specified, so flexibility and versatility in design are key. - The PCB should be designed with potential connectors and interfaces in mind, although specific types (like USB, HDMI, Ethernet) have not been pre-determined. Ideal candidates for this project should have: - Extensive experience in PCB design, especially designing based on sample reference PCBs. - Ability to work with specific size constraints. - Creative problem-solving skills to design for an unspecified primary function. - Knowledge of various connectors and...

I require the design and fabrication of two distinct printed circuit boards (PCBs), each complete with schematics, layouts, Gerber files, and a Bill of Materials (BOM) specifying component selection and library management. Design 1: Compact Sensor Interface PCB This design prioritizes a compact form factor and incorporates an HLK-10M05 power supply module with integrated safety circuits, including safety capacitance and common-mode inductance. The 5V and GND outputs are routed to the load. A 2.54mm pitch is to be maintained for all pin pitches where feasible. An ESP32-S3-DevKitC will be mounted via berg strips. The board requires the following connectors: Three 4-pin I2C connectors (VCC, GND, SCL, SDA) for interfacing with DFRobot SEN0537 (), DFRobot

...situations. - Active Balancing: This should be integrated, allowing for real-time adjustments and optimizations. - Short-Circuit Protection: Ensure the system can safeguard against potential short-circuit scenarios. Deliverables: - Complete design including simulations, schematics and PCB layout. - A 4-6 Layer board. - Gerber files for production. - Testing report demonstrating the system's functionality and reliability. Ideal Skills and Experience: - Proficient in Altium Designer with a strong understanding of PCB design. - Proven experience in designing Battery Management Systems. - Familiarity with MOSFET control and its application in BMS. - Ability to deliver comprehensive design documentation and testing reports. - Experience with creating 4-6 layer boards and...

I'm looking for an expert in Arduino projects to help me create a fun demonstration locking system. The project involves: - 3x Adafruit rotary encoders over i2c - 1x 20x4 LCD over i2c - 2x LED outputs The rotary encoders will serve as the main user input for the locking system. The LCD will provide feedback for user inputs, and the LED outputs will display the system status. Ideal candidates for this project should have extensive experience with Arduino, rotary encoders, LCD displays and LED outputs. An understanding of I2C communication protocol is crucial. Please include in your proposal examples of similar projects you have completed. The LED outputs will show the status of the locking system. Power supply for the system will be battery-operated.