Arduino heartbeat sensorcông việc

Mình cần code quản lý và điều khiển thiết bị ESP8266 từ server. Yêu cầu mô tả ở file đính kèm

Personal Project : *Detail : ROS 2 and linux environment , using Lidar 2D or 3D , IMU sensor, Encoder , control BLDC motor by Can or serial *Working Skill : More experience about Linux (ubuntu) ,ROS , IOT, sensor driver, motor control, CAN & serial communication *Working method : Remote *PJ time : code design + actual test ~ 2 month (Not strict on time and able discuss) *Target : The robot can recognize the map and move smoothly * Expected cost : 500$ ~1000$

điều khiển nước trong bình bằng 2 chế độ : - Chế độ 1 : sử dụng cảm biến siêu âm siêu âm chống nước để điều khiển nước theo chiều cao ( <10cm thì bơm chạy . bơm đến khi >40cm thì dừng và van điện từ hoạt động để xả nước ra ) -Chế độ 2 : sử dụng cảm biến mực chất lỏng để điều khiển ( 1 cái gắn bên trên, 1 cái gắn bên dưới ) . bơm nước đến khi cả 2 cảm biến đều có tín hiệu thì van điện từ hoạt động để xả nước ra * điều khiển bằng công tắc xoay 2 vị trí và hiển thị các thông số trên lcd như lưu lượng , chiều cao (khi dùng chế độ 1 ) , cảm biến nào hoạt động ( khi ở chế độ 2 )

Dùng arduino điều khiển động cơ step mở van nóng lạnh thông qua cảm biến nhiệt và nút cài đặt nhiệt độ theo mong muốn

Thiết lập hệ thống cảm biến, giám sát đo nhiệt độ, độ ẩm, oxy trong đất. Thiết lập hệ thống cảm biến, giám sát đo nhiệt độ, oxy trong dung dịch Thiết lập hệ thống cảm biến, giám sát đo nhiệt độ, độ ẩm, CO2 trong không khí Thiết kế hệ thống phần mềm điều khiển tại chỗ, kết nối các sensor cảm biến, bơm nước, van điện tử nhả khí Oxy, CO2 Thiết kế hệ thống phần mềm điều khiển từ xa có kết nối giữa điện thoại thông minh và các sensor cảm biến, bơm nước, van điện tử nhả khí Oxy, CO2 Xây dựng cơ sở dữ liệu để lưu và lấy các số liệu phục vụ nghiên cứu

Mình hiện tại có 1 hệ cân bằng gồm Arduino, servo, gear, thanh thẳng để banh. Mình đã hoàn thành và chạy tốt. Nhưng yêu cầu thêm là cần phần bản vẽ P&id nữa thôi. Hình bên dưới là bộ điều khiển PID. (nội dung job là so đồ P&ID).

thiết kế và lập trinh mạch arduino giao tiếp điều khiển với module sim

Thiết kế 1 websever để nhận và gửi dữ liệu từ cảm biến esp32. các tín hiệu thông qua mạng wifi hoặc blutooth. Đầu đọc chất lượng nước theo như thông số cảm biến nhưng tín hiệu đưa về là vôn, tín hiệu xuất ra như của cảm ...nước theo như thông số cảm biến nhưng tín hiệu đưa về là vôn, tín hiệu xuất ra như của cảm biến " phần này là cảm biến có sẵn đơn vị, chỉ có đổi đơn vị đầu vào thành vôn". thiết kế mạch EC meter qua chương trình Orcad hoặc Proteus. In mạch EC metter. Cảm biến TDS "EC Metter" ...

Thực hiện sợ đồ, gia công sản phẩm có sẵn, thêm tính năng xoay 180 độ cho sản phẩm nhờ servo!

Tự động hoá nhà nuôi yến. Yêu cầu 1 hệ thống tự động, điều khiển từ xa thông qua kết nối internet, hoạt động trên 1 PC (kết hợp Arduino). - Hệ thống hoạt động trên nguồn điện DC 12v. - Output 3 lines âm thanh độc lập + 3 amplifiers. - Đo nhiệt độ và độ ẩm. Output: DC brushless pump. - Giám sát bằng camera, sensor báo động đột nhập. - 3 ngõ Output khiển tích hợp timer: bơm hơi, đèn, quạt. Bạn thạm gia dự án có thể chọn 2 phương án: giá thầu tổng hoặc chỉ thi công (vật tư dự án cung cấp)

Sử dụng cánh tay 3D vẽ theo mẫu có sẵn , in 3d Sử dụng Arduino Mega 2560 + Ramps 1.4 shield Hiện đã có mô hình

I'm working on an educational project involving the STM32F429 microcontroller, and I need assistance modifying a template for this. The project involves reading data from a DHT11 sensor, specifically both temperature and humidity, and sending this data over Bluetooth using an HC-05 module. Key requirements: - Modifying a template to read a DHT11 sensor - Sending data over Bluetooth using HC-05 module - Formatting the data as a formatted string for transmission Ideal skills and experience for this job: - Proficiency with STM32F429 microcontroller - Experience with DHT11 sensor and HC-05 module - Strong understanding of Bluetooth communication - Ability to work with educational project goals in mind - Experience in data formatting for transmission

... FastAPI. Database: MySQL, SQLite. Input Devices: Palm recognition for payments. Biometric fingerprint scanner. 3D camera for facial recognition. Omnidirectional microphone with noise cancellation. Sunlight and water-resistant touchscreen (IP65 or higher). Proximity sensor. Output Devices: Speakers for synthesized voice output (TTS). Ticket and receipt printer. Additional Peripherals: Barcode and QR code scanner. NFC reader for card payments. Palm and facial payment readers. Wireless credit/debit card reader. Temperature sensor for contextual recommendations. 3. System Features 3.1 Modules and Services BOT 1: Welcome & Identification BOT Purpose: Identifies users through biometrics (face, fingerprint, palm), credentials, or other means. Provides a personalized, empathe...

...design should reflect the requirements for such a facility. - The carpet area is 2081 square feet in 3rd floor (independent). Therefore, the architect needs to consider efficient space utilization and patient flow in the design. - Although the client didn't specify, the architect should ideally include consultation rooms, operating rooms, and recovery suites in the design. - Vastu compliance - Smoke sensor, fire extinguisher location and safe way out map Ideal Skills and Experience: - Proven experience in designing medical facilities, particularly surgical centers. - Knowledge of the specific requirements for cosmetic surgery centers. - Ability to design for a capacity of up to 50 outpatients per day. - Strong understanding of space utilization and patient flow. - Excellent...

I'm seeking a skilled programmer to write an Arduino code for a BQ25887 USB charging IC. The code should manage the initiation of charging for two Lion batteries, ensure cell balancing, and support 5V 3A charging from any standard adapter. I am using a MIKROE Balancer 5 click. () Key Requirements: - Charging condition: Need to charge two separate single cell battery of 2000mah via USB charging of around 5V 3A. - For each individual cell, the max charging voltage should be 4.2V and the maximum charging current for each battery should be 1A. - The code should allow for automatic initiation of the charging process. - Enable cell balancing to maintain cell voltage equality. - Implement fault recovery (e.g., reduce current, stop charging). - Adjust charge

Frontend Technologies : UNITY Backend Technologies: MYSQL,PYTHON List of Hardware / Sensor / Processor (if Project on Embedded System) : VR MASK Concept with Techniques 1. Main Lobby: * Design a 3D lobby environment using Unity, incorporating navigation elements like buttons or portals to access different therapy rooms. * Implement Unity's UI system to display user interface elements such as menus, progress bars, and tooltips. * Use Unity's scene management to load and unload different scenes seamlessly as users navigate through the lobby. 2. Nature Retreats (Nature Rooms): * Create immersive nature environments using Unity's terrain system, asset store, or procedural generation techniques. * Utilize lighting effects and particle ...

I have an ESP32-CAM project that needs to recognize a few custom objects and execute a pre-written Arduino program based on the recognition. The program is already ready, and I simply need the ESP32-CAM to identify the objects and trigger the next action. The specifics of the project include: - Recognizing 1-5 custom objects with the ESP32-CAM - Using a manually collected image dataset to train the recognition system Ideal candidates for this project should have: - Experience with ESP32-CAM and Arduino - Skills in object recognition and machine learning - Ability to work with custom datasets - Proficiency in programming and hardware interfacing

I'm seeking an expert in circuit design, PCB creation, and programming for an NXP Battery Sensor tailored for an automotive application. Key Requirements: - Full design and programming of the NXP Battery Sensor with CAN and LIN MM9Z1_638. - Implementation of only the LIN (Local Interconnect Network) interface. - Support for specific functionalities: Voltage monitoring, Temperature sensing, and Current measurement. Ideal Skills and Experience: - Extensive knowledge in automotive sensor design. - Proficient in designing circuits and PCBs. - Experienced in programming for NXP components. - Familiar with LIN interface implementation.

I'm seeking a professional with expertise in LiDAR technology for a security project. The primary focus is on the detection of flying objects in outdoor open spaces. Key Requirements: - Design and implement a Live LiDAR sensor system capable of identifying flying objects. - Utilize point cloud object detection techniques to enhance surveillance capabilities. Ideal Skills: - Proficiency in LiDAR sensor technology and point cloud processing. - Experience in developing systems for security and surveillance. - Knowledge in detecting specific objects, particularly aerial entities. We use Velodyne lidar as the main source of point cloud (velodyne .py driver is available with ROS2)

I'm looking for an experienced C# .NET Core developer to create a Profinet driver that operates as a Windows service. The application should have a web interface for configuration and management of the driver, and function as a RESTful API for data access. Key requirements: - The driver will collect sensor readings and send it to a specified endpoint. - It should manage its own cache, which size can be configured based on the number of days of data retention. - The web interface should allow for driver operations management (start/stop/restart), endpoint configuration for data transmission, and cache size and retention settings. - The driver should use Basic Authentication for its RESTful API. Ideal skills for this job include: - Proficiency in C# and .NET Core - Experience ...

...The project involves controlling a VFD and braking system using an Advantch USB controller 5801. Key Tasks: 1. Programming VFD speed based on RPM and frequency. 2. Implementing control for a pneumatic solenoid brake system. 3. Displaying various sensor data including wheel temperature, brake shoe temperature, ambient temperature, RPM, stopping distance, braking time and airflow velocity. 4. Measuring stopping distance via wheel rotations and time. 5. Allowing user to set operation cycles from 1 to 10. 6. Generating comprehensive reports of all sensor data with specified metadata. Requirements: - Proficient in LabVIEW programming - Experience with VFD and braking system controls - Familiarity with Advantch USB controller 5801 - Ability to integrate specific measurement u...

I'm in need of a seasoned Juniper engineer who specializes in network setup and configuration. The project involves setting up a Local Area Network (LAN) that will primarily connect IoT devices and sensors. Ideal Skills & Experience: - Extensive knowledge and experience with Juniper network devices - Proven track record in LAN setup - Familiarity with IoT devices and sensor integration - Excellent problem-solving skills - Strong understanding of network security (a plus)

I need expert assistance in transforming my ETS KNX file into compatible Home Assistant files. My primary use for this setup is home automation, and it s...transforming my ETS KNX file into compatible Home Assistant files. My primary use for this setup is home automation, and it should seamlessly integrate with my existing lighting controls and thermostats. Key Tasks: - Convert ETS KNX file to Home Assistant files - Ensure compatibility with lighting controls and thermostats - Set up for planned home automation tasks including scheduled events, sensor-triggered actions, and voice command integrations Ideal Skills: - Proficient in Home Assistant - Experienced with ETS KNX systems - Strong understanding of home automation scenarios Please bid if you have the relevant experience a...

The BLE beacon Device is Controlling a Servo as actuator. Connection is done in parallel to tracker and /or Smartphone. Security Should be identical to existent LTE solution. Some Sensor Signals have to be transferred. System has to work with/without cloud Mobil connection. Only Cloud Registered devices are allowed to be connected. Chip is Nordic 5310 developing platform Nordic SDK. Hardware existing.

I'm seeking a seasoned PCB designer to assist in creating a custom, compact PCB for an IoT project focused on sensor integration. The PCB will need to accommodate several components, including an ESP32-WROOM-32 microcontroller, SIM card module, SD card module, and RS485 transceiver. Key Requirements: - Expertise in PCB design, specifically for IoT applications. - Experience integrating multiple components onto a single PCB. - Ability to design a compact-sized PCB without compromising functionality. - Familiarity with the ESP32-WROOM-32 microcontroller and other specified modules. Ideal Skills: - Proficiency in PCB design software. - Strong understanding of sensor integration and IoT systems. - Excellent problem-solving skills to overcome design challenges. - Attention ...

I am in need of a detection system for a project involving a rotator and microfiber material. The obj...material) ceases to fall into the rotator. Key details: - The detection system can use both sensors and cameras; I am open to either or a combination of both. - The detection will occur in an indoor environment with variable lighting conditions. - The system must have high accuracy in detecting when the microfiber stops falling. Experience and skills ideal for the job include: - Proficiency in sensor and camera systems. - Experience in developing detection systems for variable environments. - Expertise in creating high-accuracy detection systems. If needed, I can arrange for the required sensors and cameras. Please bid only if you can deliver a solution that meets these speci...

I'm working on a project for my BMW E60 and I need a professional with Arduino coding experience to help me with the programming. The project involves creating a remote start system that uses either the Nano 33BLE or an ESP with a CAN bus module. The system will also incorporate a fingerprint module and various other safety sensors. Key aspects of the project include: - All coding needs: This includes the coding for the remote start using the fingerprint module, the remote unlock functionality using BLE or standard Bluetooth, and the integration of the CAN bus and other safety sensors. - Focus on all elements: The coding assistance required will cover every aspect of the project, from the integration of the CAN bus module to the configuration of the BLE/standard Bluetooth for ...

I'm seeking an expert Flutter developer to create a real-time data handling application. The project involves working with analog data collected from environmental sensors, such as temperature and humidity readings. Key Requirements: - Proficient in Flutter with a strong portfolio of similar projects. - Experience in handling real-time data. - Knowledge of working with environmental sensor data is a significant advantage. - Ability to deliver a user-friendly and efficient application.

I need a skilled PCB designer to create a circuit board capable of measuring distances using a laser sensor (or ultrasonic). This system should have adjustable ranges and provide alerts through both vibration and sound. Furthermore, the design should incorporate a SIM for communication, virtual human sensors and a GPS module for real-time location tracking. Ideal Skills and Experience: - PCB design - Knowledge of laser sensors - Experience with SIM and GPS modules - Understanding of vibration and sound alert systems - Ability to create designs for adjustable range systems Please note, the system will need to provide real-time tracking, so experience with designing for this capability is essential.

Potrzebuję stworzyć projekt do Arduino Nano gdzie poprzez RS485 będę odbierał 2 wartości z zakresu 0-100 używając Modbus RTU w trybie Slave. Mam kupione wszystkie potrzebne część ale potrzebuję do tego programu.

tengo un arduino uno con shield W5100 y esta en ethernet con su código para mover el servomotor que tiene tengo que entrar pára controlarlo remotamente a una dirección Internet como http;// y deseo entrar por MIT APP INVENT de forma que por medio flechas para girar izquierda ,derecha remotamente el servomotor

I want a person who is master in Arduino, Moisture/Humidity Sensor and Solenoid Valves of Pipes, In This project I want to integrate around 20 moisture sensor each connected to each plant and a reservoir containing water with a motor and solenoid valves leading to each plant using Arduino We can do like which plant needs water also this project should run on AC Current, when the level of water in reservoir is less it would send an alert to the user by beeping and close the motor for time being, just simple, This I want like for my home. Please if you make this it would be very kind of you because oftem I am not at home and my plants die due to lack of water

I'm looking for an engineer with experience in microcontrollers or Arduino to build a timer for an educational project. This timer should have the following functionalities: - Countdown Timer - Interval Timer The timer should use a Seven-segment display. Ideal candidates for this project should have a strong background in electronics and programming, particularly with Arduino or similar microcontrollers. Experience with building educational tools or projects will be a plus.

I'm looking for a mobile app developer to create an application for monitoring data from a moisture sensor connected to an Arduino device. The app should be compatible with both iOS and Android platforms. Key Features: - Monitor data from a moisture sensor in real time - Cross-platform compatibility (iOS and Android) Ideal Skills: - Proficient in mobile app development, particularly for iOS and Android - Prior experience working with Arduino and sensor data - Strong understanding of UI/UX for sensor monitoring applications

I'm seeking an expert in robot navigation and Deep multimodal AI using the Webots simulator (Pioneer 3 DX Robot) for the following: Key Requirements: - Integration of multiple sensors. - Implementation of Deep Reinforcement Learning (e.g., Deep Q-Networks). - Attention mechanisms are used to filter sensor data. - Robust navigation in a dynamic indoor environment. Expected Deliverables: - A complete Webots project file. - Documented source code with explanations. - Performance analysis and validation. - A report or paper explaining the methodology. Testing and Simulation: - The robot should navigate using a combination of cameras, LIDAR, and ultrasonic sensors. - The simulation should emulate the complexities of an actual office space. Ideal Skills: - Proficiency in Webots ...

This quote states the cost and timeline needed to design and develop a working prototype of a digital clock/timer, Sensor unit and Trigger unit. Cost/Milestone for design and development for hardware and Firmware (clock/timer driver(main unit), sensor unit and trigger unit) based on Magnetic field sensing.

I'm in need of an expert in IBM Watson, specifically in the realm of Data Analytic...this project revolves around the automation of tasks through machine learning techniques. The primary data source for this project will be sensor data, so experience and skills in handling this type of data is crucial. Key Responsibilities: - Utilize IBM Watson's Data Analytics capabilities to automate tasks via machine learning. - Work primarily with sensor data for pattern recognition. - Implement best practices in DEV OPS to ensure project efficiency and success. Ideal skills for this job: - Proficiency in IBM Watson, especially in Data Analytics. - Strong background in machine learning and task automation. - Extensive experience working with sensor data. - Solid unders...

Project Description: We are looking for an expert freelancer to develop a custom watch capable of receiving messages from an online platform and displaying them in tuple format. The watch should cycle through messages one at a ti...for showing messages. Button for navigation. Bluetooth communication. Deliverables: Fully functional watch prototype. Source code for both the watch and the external ESP32 module. Circuit diagrams and assembly instructions. Freelancer Skills Required: Embedded systems development. Experience with microcontrollers (ATtiny85, ESP32, etc.). Knowledge of Bluetooth communication. Proficiency in C++/Arduino programming. Hardware prototyping (OLED displays, buttons, power modules). Documentation skills. Budget and Timeline: Budget: 8k. Timeline: Deliver within ...

...development, and sensor integration (e.g., ECG or similar biosignals). Cloud Platform / Backend Expert to handle secure data transmission, storage, and basic analytics. Key Responsibilities: Hardware & Firmware Development: Design or refine a small handheld device incorporating biosignal sensors (details to be shared under NDA). Connectivity & Data Security: Implement secure data transfer (e.g., Bluetooth/Wi-Fi) with end-to-end encryption. Cloud Integration: Build or integrate with a backend to receive, process, and store user data compliantly. User Experience Focus: Collaborate on creating a simple, senior-friendly interface and workflow. Requirements: Proven track record in IoT/embedded projects or medical device development (or similar). Familiarity with ...

Vui lòng Đăng Ký hoặc Đăng Nhập để xem thông tin.

I'm looking for a professional who can build an Arduino WiFi smart switch for controlling my lights. The control mechanism will be a data processing algorithm with two variable inputs. Key Responsibilities: - Develop a smart switch using Arduino that connects to WiFi - Create a data processing algorithm with two variable inputs for controlling the lights Ideal Skills: - Proficiency in Arduino programming - Experience with WiFi module integration - Strong understanding of data processing algorithms - Prior work with smart home devices is a plus Please share your relevant experience and any similar projects you've worked on in the past.

More details: What is the main purpose of your Arduino project? Home automation Which components will you be using in your home automation system? Which specific feature do you want to prioritize in your home automation system? Energy efficiency (e.g., smart lights, thermostat)

...central part of the circle and a ring is formed, which goes into further processing. The press has the main motor (flywheel motor), a fine adjustment motor and a lubrication motor. The flywheel motor is the main motor that moves the press up and down. The operation of this motor depends on several sensors (reference point - the highest point where the press is located, brake sensor, brake release sensor, clutch sensor). The fine adjustment motor is used for additional correction of the press stroke (it amounts to +- 10-20mm), i.e. an additional motor that regulates the operation of the press. The operation of these motors is limited by the upper and lower switches. The lubrication motor can be connected directly, to lubricate all the time or to correct the lubrica...

I need design & simulations for a 2wire & 3wire current loop transmitter using XTR115 . the sensor input is 0 - 24V ouput should be 4-20mA Key Requirements: Simulations : - I need circuit & simulation of the design in Altium or LTspice I am looking for someone who can complete this project ASAP, given the urgency. Please only apply if you have relevant experience and can deliver high-quality work quickly.

I am seeking a trainer to teach middle school students STEM concepts using Arduino. The primary focus will be on hands-on, interactive lessons that make these concepts accessible and enjoyable. A strong background in both STEM and robotics is crucial, as is experience working with this age group. Key Responsibilities: - Develop and deliver engaging STEM-focused lessons using Arduino - Foster a positive and inclusive learning environment - Adapt teaching methods to suit different learning styles and abilities Ideal Skills and Experience: - Proven experience teaching middle school students - Strong knowledge of STEM concepts and robotics - Proficiency in using Arduino for educational purposes - Excellent communication and interpersonal skills

HM Interface Designed by Matlab program will send step motors data from Matlab to Arduino. Control a stepper motor connected to Arduino through Matlab. Arduino sketch file communicates will Matlab program. Program Interface will show and control current angle/step, degrees to Jog, motion jog +/- and X Y Z current position each of joints. On the program Human Machine Interface will have buttons for Teach New Position, Modify Position, call program and delete program, etc. . Program will make Auto Calibration, Manuel Calibration and Show Calibration values for each joints. Program section will be inputs and outputs toggle buttons for entering values servos and digital outputs. MATLAB Program will provide us as design view with written codes not just as .exe file. Progr...

I'm working on a custom project that involves using a stepper motor controlled by an Arduino. The motor needs to be able to rotate a few degrees, stop and then reverse back to the starting point with precision. I need an expert to provide advice on sourcing the correct motor and controller. Key Requirements: - Help in selecting the appropriate stepper motor and controller. - Programming the Arduino to control the stepper motor with precise position control. Ideal Skills: - Expertise in Arduino programming. - Experience in working with stepper motors. - Ability to source appropriate hardware and wiring instructions.

I'm in need of an experienced professional who can help me with connecting an EC100-N-421-A01 (stretch sensor) to an ESP32 module. The collected data should then be transmitted via Bluetooth to both Apple and Android devices. Key Requirements: - Connect the stretch sensor to the ESP32 module - Transmit processed sensor data via Bluetooth - Ensure the data is displayed on mobile devices through graphical visualization Ideal Skills: - Proficiency in working with ESP32 modules and stretch sensors - Extensive experience in Bluetooth data transmission - Ability to develop mobile-friendly graphical visualizations I only need processed data from the stretch sensor. Please, bid if you are skilled in the aforementioned areas.

I need to have my Bosch Rexroth drive programmed. This will involve utilizing a closed circuit feedback loop for a pump control system. The pressure sensor will be used for the feedback loop, and the control algorithm will be a PID control. Key Requirements: - Programming of Bosch Rexroth drive - Implementation of closed circuit feedback loop - Use of pressure sensor for feedback - Application of PID control algorithm Hardware: - Please note that I already have the necessary hardware for this project. Ideal Skills and Experience: - Extensive experience with Bosch Rexroth drives - Strong knowledge of closed circuit feedback loops - Proficient in programming PID control algorithms - Familiarity with using pressure sensors in control systems - Prior experience in pump contr...

I'm looking for an expert firmware programmer to help develop firmware for an STM32 embedded project. The main purpose of this firmware is to collect data from a current measurement sensor. The data will be used for real-time monitoring and displayed on an e-paper display. Ideal candidates should have: - Extensive experience with STM32 firmware development - Proficiency in programming for sensor data collection - Knowledge in addressing e-paper display through SPI Your role will involve: - Writing efficient and reliable firmware Schematics for the microprocessor are complete and available. I look forward to your proposals.