Ansys Jobs

This UDF (User Defined Function) is designed to model the transpiration phenomena of tomato plants in a simulated environment using ANSYS Fluent. The UDF calculates thermal and moisture exchanges based on environmental parameters such as ambient temperature and relative humidity, considering the plants as porous parallelepiped blocks. The objective is to understand and simulate the impact of climatic conditions on the internal dynamics of the plants. The code initializes the internal temperature and water fraction within the domain's cells. It employs empirical and physical relations to estimate stomatal and aerodynamic resistances, heat flux, vapor pressure difference (DPV), and convection properties based on flow regimes (natural, mixed, or forced convection). The UDF also computes ...

I'm looking for an expert in ANSYS Fluent and fluid dynamics analysis to perform a PCM heat sink analysis. Key requirements: - Proficient in ANSYS software with a focus on Fluent - Extensive experience in fluid dynamics analysis - Familiarity with PCM heat sink technology - Capable of providing detailed CFD simulations and flow modelling Your expertise will help assess the thermal performance and efficiency of the PCM heat sink under various conditions.

Project Description: We are looking for an experienced CFD freelancer to work on a buffer tank simulation project. This task is designed to gauge your capabilities in solving complex mixing and heat transfer problems. If successful, we have additional buffer tank projects and a pipeline of CFD work in the future. Objective: The goal is to analyze the tank's performance and propose effective internal design modifications to achieve strict compliance with the following requirements: Compliance: The outlet temperature must meet 14°C ± 1°C at 240 seconds. Tank Parameters: Adiabatic conditions: The tank is thermally insulated, with no heat gain or loss. Dimensions: Tank diameter 3100mm, height 6100mm. Pipe Orientation: Current inlet and outlet pipe orientation (90°) is...

I'm looking for a skilled professional who can design and simulate millimetric wave lenses to focus a mm wave radio to short distances of 30 to 100 cm. DETAILS: - The lenses should be placed on a mm wave radio's transceiver horns. The separation of horn center to center is 24.5 mm. - The beams (Tx and Rx) should focus the outgoing and incoming beams to the specified short distances. - Each lens is expected to be several cm (5) in length, and not more than 2 cm in diameter. - The lenses should be designed to be placed adjacent to each other with a thin isolator between them to prevent crosstalk. - The design should recommend the lenses' material. MATERIAL CHARACTERISTICS: - While the specific material characteristics: low losses an well focused beam SOFTWARE: ...