Cisco 3504 wireless controller işler

I'm looking for a talented illustrator who can create a unique picture of the Road Runner and Wiley Coyote characters from Looney Tunes. Here's...Runner: It's vital that the Road Runner does not look cheerful. The character should have a serious face, holding an AR-15 while standing near a dead Wiley Coyote saying “Meep Meep”. - Background: Just a plain background will suffice for this picture. The emphasis is on the two characters and their interactions. Those wishing to take up this project should have relevant experience in character controller, cartoon drawings, and be innovative in incorporating the unique aspects of the characters to maintain their original premise in the picture. The art should have captivating visual storytelling to capture the ...

We are looking for SKILLED FREELANCE NETWORK ENGINEERS to fix routers/replacing/deployment projects onsite near you. We have small to large projects in all countries. Requirements: - Cisco certification - Level 1 - Rack and Stack (R&S) projects - Mostly projects are to physically install and configure the router at your nearby site. - The ideal candidate should have expertise in Cisco networking, specifically in Rack and Stack procedures. If you have the required skills and are interested to work with us, kindly message us.

<Overview> Please collect product information on vehicles that have or will have the technologies described in the “Technology Description” section below. <Technology Description> This technology is used to properly perform software updates on vehicles with OTA technology (that is a technology transmitting and receiving data via wireless communication). In OTA software updates on the vehicle, it is necessary to obtain the user's approval before updating the software. One of the problems that can be anticipated when a portable information terminal (e.g., smartphone) is used to obtain the user’s approval is that software updates will continue to be executed even if the connection between the information terminal and the vehicle is disconnected aft...

...even by an authorized user, the user must start the engine again. This reduces user convenience. To solve this problem, after the remote pre-conditioning is executed, this technology allows the engine to continue to run and permits use of the vehicle only when (i) a prescribed release operation, such as braking, is detected and (ii) the presence of the smartphone in the vehicle is detected via wireless communication. On the other hand, in other cases, the technology stops the engine from running and prohibits the use of the vehicle. Please search for this technology in this contest. <<NOTICE>> The target car brands in this search are limited to US, European, Chinese, and South Korean brands. <Requirements for Payment> ・Submit documentary evidence that cl...

Wpf C# - screen 3 design. Content: View/View Model / Controller / Model

Two current controllers: 0-600V input 0-20A output Connected to PC for current control $500USD to start $1250USD when delivered

I am currently using Azure AD Connect to sync users from my Windows Domain Controller to Azure AD. I manually assign licenses to each user. However, I am encountering an issue where unlicensed users appear in Teams. I haven't configured any specific settings to manage the visibility of unlicensed users in Microsoft Teams. I am looking for a solution to this problem from a knowledgeable freelancer with extensive experience in Azure AD, Azure Teams and user sync tools. Ideal skills for this project would include: - Proficiency with Azure AD Connect - Knowledge of Azure Active Directory licensing configuration - Expertise in managing the visibility of unlicensed users in Microsoft Teams If you have successfully tackled such issue before, I would love to hear from you. Let&rsq...

I am looking for a developer to assist with 2x way data communication between ESP32 Micro-Controller and Python and JavaScript servers. I have working sample code and need someone to bring everything together and ensure all code works for all test cases. AES256 is used for encryption algorithm, while the HmacSHA256 for hashing algorithm. Key requirements: - Good understanding of ESP32 MCU, Python, and JavaScript - Good understanding of data encryption, decryption and hashing techniques, particularly using AES256 & HmacSHA256 It is a small project needs to be completed as soon as possible.

I am on the hunt for an experienced embedded system developer with a keen interest and experience in IoT and medical devices. The main purpose of the project is to work on creating circuits that include: • Bluetooth wireless connectivity • Integrated sensors Touch screen Stepper motor controls You will be responsible for designing circuits that make our IoT and medical devices function at optimal capacity, while maintaining efficient power usage. Specific skills and experiences that I would ideally prefer: • Proficiency in circuit development for IoT and medical devices • In-depth understanding of Bluetooth as a connectivity protocol • Past experience with sensor integration • A strong knowledge base in power efficiency I am excited to see how we...

I'm seeking an adept freelancer who can design an engaging, futuristic GUI for a 2.8 inch 320x240 display, to be used on a controller device. Although this project doesn't require specific functions, the GUI should have the capability to display real-time data and customizable layouts. In the application, successful candidates should present examples of their past work, ideally with a focus on GUI design. Ideal Skills and Experience: - Expertise in GUI design and development - Familiarity with creating interfaces for touchscreen inputs - Ability to design customizable and adaptable layouts - Experience in integrating real-time data display into GUIs - Proven record in crafting futuristic and visually compelling interfaces. Please highlight these skills and experienc...

...‘Esencia’ Etc. Each society has many house, like 50 flats in Adani, 100 flats in Anantraj etc and each flats has 4 floor and parking area. There are some flats with basement, 3 floors and parking Each society has specific items that needs to be installed like below: In Adani Curtain tracks 2 units, Curtain Motor 2 units, Smart controller x4 units, CCTV, VDP In Anatraj Background Music System 1 unit, Curtain tracks 1 unit, Curtain Motor 1 unit1, Smart controller x2 units, VDP =>Problems Facing: #Can’t keep a track of site status like what all items are installed in which site and which floor #Can’t get instant status of sites =>What I am looking For: #Keep a record of which all items are installed at which site and which floor Handover stat...

Project Title: Wifi controller not working Overview: I am in need of a skilled technician to help troubleshoot and fix the issue with my wifi controller. The controller is connected to a router and I am experiencing no signal at all. Currently LAN is working, wifi needs to be troubleshoot. Requirements: - Expertise in wifi controller troubleshooting and repair - Familiarity with router configurations and settings - Ability to diagnose and resolve issues related to no signal - Proficient in identifying and resolving connectivity problems Skills and Experience: - Extensive knowledge of various router brands and models, including Netgear Nighthawk, TP-Link Archer, and other specified brands - Strong understanding of wifi signal strength and how to optimize it -...

I am looking for a freelancer who can update the iOS on my Cisco ASA 5515. Requirements: - The current version of iOS installed on the Cisco ASA 5515 is Cisco Adaptive Security Appliance Software Version 9.2(2)4 Device Manager Version 7.2(2)1 - I want the freelancer to update the iOS to the latest version available. - After the update, I need the freelancer to check the system for any potential issues. Ideal Skills and Experience: - Experience in updating iOS on Cisco ASA devices. - Knowledge of the latest iOS versions for Cisco ASA 5515. - Ability to troubleshoot and identify potential issues after the update. Please provide your relevant experience and expertise in your proposal.

As someone who is familiar with the purpose of Ingress URL redirect, I urgently need someone proficient in Nginx ingress to assist in redirecting traffic to improve user experience...Ingress URL redirect, I urgently need someone proficient in Nginx ingress to assist in redirecting traffic to improve user experience. The specifics of the incoming traffic or URLs to be redirected are currently undetermined, hence flexibility here is necessary. The project needs to be completed as quickly as possible. Ideal candidate should: - Have significant experience with Nginx ingress controller and Ingress URL redirect - Be able to provide advice and solutions on a flexible basis - Be capable of working on tight schedules Your timely and professional assistance in this matter will be greatly ap...

I'm in need of an industr...about the marriage of form and function. KEY FEATURES: • Noise-Canceling Technology: I desire headphones that can help users isolate from their environment and allow them to fully engage with their music or call. • Wireless Functionality: The designed headphones must be ergonomically sound and give convenience in mobility, eliminating the fuss of cords. IDEAL CANDIDATE: • Experience in designing headphones or similar complex electronics is a definite advantage. • A strong portfolio with minimalistic designs. • Knowledge of ergonomic design principles. • Understanding of wireless and noise-canceling technologies. Through this project, we could potentially provide a cutting-edge product in the market, enhancing t...

I am looking for a Cisco Packet Tracer expert who can assist me with network design tasks. Specifically, I need assistance in designing a network using Cisco Packet Tracer. Requirements: - Advanced level expertise in Cisco Packet Tracer - Ability to create a step-by-step guide for the network design process Tasks: - Designing a network using Cisco Packet Tracer based on requirements provided - Providing a detailed explanation of the design in a step-by-step guide Ideal Skills and Experience: - Advanced knowledge of Cisco Packet Tracer - Strong understanding of network design principles - Ability to create clear and concise step-by-step guides If you are an advanced Cisco Packet Tracer expert and can provide a detailed explanation of the networ...

I have a laravel page After you click 1. fastest button 2. choose distance Problem: We are showing duplicate rows that have same dog name. Expected Outcome: We should only show unique value by Dog Name Shouldn't take more than an hour, need someone can start now

Design Air Ionizer Detector We are looking for a skilled profe...The device should have the following necessary features: - Visual display: The air ionizer detector should include a visual display to easily read and interpret the ion levels. - Compact and portable: The preferred size for the device is compact and portable, making it easy to carry and use in various locations. The ideal candidate should have experience in designing electronic devices with wireless connectivity and battery operation. They should also have a strong understanding of air quality and ion detection. If you have the skills and expertise to create a compact and portable air ionizer detector with a visual display, we would love to hear from you. Please provide examples of previous similar projects in your...

I have a laravel page After you click 1. fastest button 2. choose distance Problem: We are showing duplicate rows that have same dog name. Expected Outcome: We should only show unique value by Dog Name Shouldn't take more than an hour, need someone can start now

I have a laravel page After you click 1. fastest button 2. choose distance We should only show unique value by Dog Name Shouldn't take more than an hour, need someone can start now

...Customer, Exciting news for Volvo enthusiasts! Elevate your driving experience with our latest BLP-950A Host. BLP-950A 2024 Android 11 Headunit for Volvo S80, V70 and XC70.. All BLP-950A users only need to replace the host in glovebox compartment. Key Features: ● Faster Performance: 8 Core 1.8 GHz Processor for seamless performance. ● 4GB ROM + 64GB RAM ● Bluetooth 5.0 ● 4G LTE + WIFI ● Wireless Android Auto & CarPlay ● Entertainment Hub: Supports Full HD, DAB+ Tuner ● Smart Connectivity: Screen Mirroring, OBD2 Functionality, and Online Maps. ● User-Friendly: Multi-touch screen, easy UI, and customizable themes. ● Supports ADAS DVR recorder + 360 Panoramic Camera Why Choose BLP-950A? This advanced headunit seamlessly integrates with your Volvo, retaining all orig...

I am looking for a skilled freelancer to configure multiple captive portals on my OMADA controller. Each LAN port should have a different login page. Requirements: - Experience with configuring captive portals on OMADA controllers - Ability to create or modify existing login pages - Familiarity with network configuration and LAN ports Timeline: - The project should be completed within a week. Please provide examples of previous work or relevant experience in your proposal.

More details: What is the purpose of embedding the H2S...expert but I see you can get sensors on e-Bay like "MQ136 Hydrogen Sulfide Gas Sensor Module H2S Gas Detection Sensor Module High Se" More... Power can be via battery but the Aircon unit is next to a 220V AC socket. Being located externally the system will need to be sealed somehow with the exception of the sensor of course Another option would be integrating something like the Monnit ALTA Wireless AA Hydrogen Sulfide (H2S) Sensor with an App to send a signal to the Aircon unit, this sensor also allows data logging so this is useful to have. This will may impact the price of the project of course as it is a more expensive unit. The good thing is it is an off the shelf unit that needs an application wrapper. Again...

...assist me with wireless microphone calibration for a Sennheiser EW 100 G4 model. The microphone will primarily be used for live performances in indoor environments. Skills and experience required: - Proficiency in wireless microphone calibration - Knowledge of the Sennheiser EW 100 G4 model - Experience with live performance sound engineering - Familiarity with indoor sound acoustics Key requirements: - Calibrate the Sennheiser EW 100 G4 wireless microphone for optimal performance in live performance settings. - Ensure the microphone is well-suited for indoor environments and can deliver high-quality sound. - Collaborate with the sound engineering team to achieve the desired audio output during live performances. If you have the necessary skills and experience i...

Project Title: Read Traffic from mininet with ryu controller Project Description: I am looking for a freelancer to help me with network monitoring by reading traffic from mininet using the Ryu controller. The purpose of this project is to monitor the network and gain insights into network performance and behavior. A Python programming language to create a code that reads the statistics of mininet topology with ryu controller, the random traffic was already generated using iperf, but it is required a Python code to read the traffic packets or throughputs between every two nodes at every timestamp and the output should be a two dimension matrix with the number of nodes. Then take snapshots of the traffic matrices and generate different plots to see how the traffic chan...

I am looking for a programmer who can program our custom board having stm32 microcontroller, which will be interfaced with an LCD and a wireless module. The ideal candidate should have experience in programming in C language. Specific requirements for the wireless module: - The wireless module should have certain features implemented, which will be discussed in detail with the chosen freelancer. Preferred LCD interface: - The project requires a serial interface for the LCD. SPI Please note that the programming language for this project is C.

I am looking for a Network or Unified Communications Engineer to assist me with network optimization and performance tuning. Specific requirements include: - Optimizing network performance and improving overall efficiency - Tuning network resources to ensure optimal ...include: - Optimizing network performance and improving overall efficiency - Tuning network resources to ensure optimal functionality - Implementing best practices for network optimization Ideal skills and experience: - Strong knowledge and experience in network optimization and performance tuning - Proficiency in Cisco networking hardware and software - Familiarity with small-scale networks (1-10 devices) If you have expertise in network optimization, performance tuning, and Cisco networking, I would love ...

I am looking for a freelancer who can help me design and build a wireless analog switch system using NRF24L01 modules. The project requires the following: Range: The wireless communication range should be more than 500 meters. Switch Design: There are no specific dimensions to follow, but it should be compact. Additional Features: The system should have power saving functionality to conserve energy. Ideal Skills and Experience: - Experience with wireless communication modules, specifically NRF24L01. - Proficiency in designing compact electronic systems. - Knowledge of power saving techniques in electronic devices. - Ability to integrate power saving functionality into the analog switch system. - Attention to detail and ability to meet the specified range requireme...

...Requirements: * IT auditors require a combination of technical, analytical, and interpersonal skills to effectively conduct audits of IT Mobility Services and Unified Communication and Messaging Services Processes and Methodologies. Here are the main skills and requirements for this type of audit: * Understanding of IT Mobility Services and Unified Communication and Messaging Services: Proficiency in Cisco and Microsoft principles and best practices. * IT Systems and Infrastructure: Familiarity with IT systems, networks, databases, and software development processes. * Data Analysis: Ability to analyze data, perform data mining, and use data analysis tools to identify anomalies and patterns. * Understanding of IT Governance: Knowledge of IT governance frameworks (e.g., COBIT...

...Requirement: The client is unsure of any specific size requirements for the circuit design. Therefore, the size can be flexible as long as it meets the functionality requirements. Preferred Method of Temperature Control: The client prefers to use a temperature controller tape with manual adjustment for temperature control. Ideal Skills and Experience: - Strong background in electrical design engineering - Experience in circuit design for temperature control systems - Familiarity with 12V DC power systems - (Knowledge of temperature controller tape and manual adjustment mechanisms)...

Hi Muhammad T., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

Hi Freelancers, Our company name is "Air Touch" and we make "Wireless TENS machine". Please search Google for what a TENS machine is. We are looking for a new logo for our brand. The logo needs to be simplistic and convey elegantly our brand and looks good on our box packaging, banners, website, etc. Please do not put "Wireless TENS Machine" on the logo as we want to be able to expand in the future to other medical devices. Thanks.

Title: Wireless Attack on Guest Network Project Description: I am looking for an experienced professional to conduct a wireless penetration testing on our guest network, with a focus on Wi-Fi protocols. The purpose of this attack is to assess the security vulnerabilities of our network and identify potential risks. Key Requirements: - Strong expertise in wireless network security and penetration testing - Extensive knowledge of Wi-Fi protocols and their vulnerabilities - Experience conducting successful wireless attacks and identifying security loopholes - Familiarity with common tools and techniques used in wireless penetration testing Timeline: - The project needs to be completed urgently, within 1 or 2 days. If you have the necessary skills and exp...

We are going to integrate part of the hair in the middle of the circle then by a controller or threw mobile phone it starts tightening to secure the hair in the middle of it so it should be very small like we might need 15 of that circle device to secure all the hair should be very small

Project Description: I am looking for a talented and creative freelancer to create an engaging ad for our 4in1 wireless charger. The ad will be targeted towards all age groups, so it should appeal to a wide range of audiences. The main selling point of our product is its unique features. We want the ad to highlight how our wireless charger stands out from the competition and why it is a must-have for tech-savvy individuals. What stands out being the new pencil charging dock. The preferred duration of the ad should be around 30 seconds, as we want to capture the attention of our audience quickly and effectively. Skills and Experience: - Experience in creating captivating ads that appeal to a diverse audience - Knowledge of social media platforms such as TikTok, Instagram,...

I am looking for a freelancer who can troubleshoot the intern...with my Loco M2 device. - The problem I am facing is that I have no internet connection. - I have not encountered any specific error messages. - I am able to access the device's settings/interface. Skills and experience required: - Strong knowledge and experience in troubleshooting network connectivity issues. - Expertise in configuring and troubleshooting Loco M2 devices. - Familiarity with wireless networking protocols and technologies. - Ability to diagnose and resolve issues related to internet connectivity. - Proficiency in accessing and navigating device settings/interfaces. If you have the necessary skills and experience, please provide your proposal for resolving the internet connection issues with my ...

...PCBs, Encoder PCB Controller PCB PCB specification: Encoder PCB : (Dimension 19 mm x 19 mm) Encoder reads the output rotation of the actuator, and links with other encoders by RS485 protocol. Encoder should be an absolute and magnetic rotary encoder. Encoder ic used - AS5045 PCB should have 1 input and 1 output connector 6 pin ffc/fpc connector. Encoder pcb image is as per figure shown below in this document. Controller PCB : (Dimension as per figure) Controller PCB collects data from all encoders, and drives the motors accordingly. PCB should connected with other pcbs with RS485 protocol as shown in figure below. Input /output connectors used in this pcb 16 pin ffc/fpc connector. PCB should operate in 12v or above. PCB will collect data or signals from the mai...

I’m in need of a custom voltage and current controller kit that leverages a Silicon Controlled Rectifier (SCR) and a microcontroller for the primary purpose of regulating voltage and current for various electronic devices. For the microcontroller, I prefer to use the STM32. Key specs include: 1. Adjustable voltage and current levels: The controller must be tunable to accommodate different device requirements. 2. Integrated Display: A feature to constantly show current voltage and current readings. 3. Safety Measures: It should have in-built overvoltage and short circuit protection to safeguard electronics from potential damage. Ideal candidates should have experience with STM32 microcontrollers, SCR, voltage and current regulation systems, and basic UI design for the ...

I am looking for a skilled freelancer who can help me set up the Tp link omada oc200 hardware controller for my network. Network Setup: - I currently have a single router - I am not sure if I need any assistance with my network setup VPN Provider: - I have a specific VPN provider in mind Primary Purpose for VPN Setup: - The primary purpose for the VPN setup is remote access to my home network Ideal Skills and Experience: - Experience in setting up Tp link omada oc200 hardware controller - Knowledge of different VPN providers and their configurations - Expertise in configuring VPN for remote access to home networks

Experienced DevOps Engineer for setting up the services on the kubernetes cluster Skills and Experience: - Strong knowledge and expertise in Rancher ...Hetzner Cloud which handles SSL termination - We need support in setting up a cluster of odoo erp. - We would like to run 3 odoo instances that share a shared volume for static files via Longhorn. Failover to other odoo instances must be possible at any time. - We use Postgresql 16 as the database. We want to run a primary database and 2 replicas with read-only access. - The standard ingress controller is nginx. In addition, nginx is used as a web server for caching static files such as CSS, images, etc. If this is a suitable challenge for you, and you feel qualified to tackle it with us, then we would be delighted to hear...

I am looking for a skilled freelancer to assist me with GNS3 networking tasks, specifically focusing on Cisco routers and switches. The ideal candidate should have experience in configuring routers and switches, setting up VLANs, and implementing OSPF routing. Project Requirements: - Remote GNS3 Server in Microsoft Azure - Configuring routers and switches - Setting up VLANs - Implementing OSPF routing - Familiarity with Cisco router and switch models - Experience working with 4-7 networking devices If you have the necessary skills and experience in GNS3 networking with a focus on Cisco devices, please submit your proposal. I am also looking for assistance in implementing Ansible automation to my network. I am very desperate as the deadline for this project is arou...

...If you are interested in the project I will provide my math then but keep it short for now. The board dimensions are 2.0" x 5.0". Components are listed below, documentation for each (less the gear box) are attached. Stepper Motor --> Nanotec SCB5618L4204-B Encoder --> Nanotec NME2-UVW-W06-05-C Gear Box --> Nanotec GPLE60-2S-20 20:1 output reduction Stepper Motor Driver --> Pololu Tic36 v4 Controller --> Arduino Nano Every v3.3 Stepper Motor Power Supply --> MJPA 36843-PS (10-60VDC, 1800W) 2 Position board to wire --> Digikey 277-6267-ND Phoenix Contact 1991095 16 Position board to wire --> Digikey 2946-736-108-ND WAGO Corporation 736-108 A little about me: I am a Manufacturing Engineer and CNC programmer of 20 years, mechanical is mor...

...- 3000 lumen LCD projector 4 - Mackie15” Powered Speakers w/stands or JBL PRX Shure UHF-R & ULX Wireless systems (3 beltpacks and 3 handheld) 3 -DPA Headset Microphone (headset mic only) 6x11 Fast-Fold screen w/ dress kit (16:9) (Size TBD - room appropriate) Mackie 1402 Mixer or Behringer x18r Cable Package (XLR, Power, power strips) Setup labor Teardown labor 4 Breakout rooms - for each room Standard projector 6 foot pop up projector screen HDMI for laptops No audio needed Saturday 8 am - 5:30 pm Main Room - Similar to the Listed equipment 1 - Audio Tech Full day operator(General tech) 1 - 3000 lumen LCD projector 4 - Mackie15” Powered Speakers w/stands or JBL PRX Shure UHF-R & ULX Wireless systems (3 beltpacks and 3 handheld) 3 -DPA Headset Microph...

I am seeking a proficient Verilog programmer to construct a PID controller from the ground up to manage a DC motor using PWM. The controller will interface with a Sparton 6 - FPGA and a DC motor driver. The characteristics that should be managed by the PID controller are the speed and position of the motor. The ideal candidate will: - Have substantial Verilog programming experience - Be experienced with PID controller development - Have a deep familiarity with working in Xilinx ISE environment - Demonstrate a high competency in controlling motor speed and position via a PID controller Your work will be key in ensuring the optimal performance of the DC motor in its relevant application. Please only bid if you have the above-listed skills and exper...

I need an expert with comprehensive knowledge of Cisco's Packet...required. Therefore, a solid understanding of DMZ design and setup is essential. - Traffic Regulation: Experience with configuring routing protocol on the firewall, preferably using OSPF and setting up rules for HTTP (web) traffic, SMTP (email) traffic, and SSH (secure shell) traffic is necessary. A candidate with a strong background in network architecture and systems security, particularly with Cisco tools, would suit this project best. Configure routing protocol on the FW (preferable using OSPF) to enable communication between subnets. Configure ACL to control the flow of packets between outside to DMZ and DMZ to outside, inside to outside and outside to inside, and inside to dmz and dmz to inside ON&...

I am in need ...design freelancer who can assist in creating a Gerber file or PCB or Bill of Materials (BOM) for a 15W wireless QI c arger. I assume this is available online somewhere, I am just need am expert to point me in the right direction. The sought-after freelancer should ideally possess the following: - Intermediate experience in electronic design - A solid background in creating Gerber files and BOMs / PCB - In-depth knowledge of wireless QI charging technology In your application, please include examples of past work similar to this project. This will provide valuable insight into your capabilities and suitability for the job. The aim is to create a robust, efficient, and market-ready wireless QI charger so your expertise and creativity in this field wi...

simple task: as the background of the app is white, when I use the tv pad controller, the background of the section im located cannot be see as the background of the selected item also clear, let me send you and example with the previous app

I'm trying to re-style the math formula in my Laravel controller but it only works on first character of the formula

I require a professional to solder and test an ESP32-based PCB for an Internet of Things (IoT) device. Key Features: - The device should provide two main functionalities: * Data collection and transmission * Device control capabilities. - This IoT device will require wireless connectivity to enable real-time control and data transmission. Skills and Experience: - Extensive experience in PCB soldering and testing - Proficiency in IoT systems and ESP32 - Familiarity with wireless communication protocols. My expectation from you as an expert is not only to solder and assemble the PCB, but also ensure its thorough functioning according to provided specifications.

I'm looking for a unique design for an electric skateboard intended for recreational use. The skateboard should feature a bendy, detachable handle to enhance its function and aesthetic appeal. The skateboard should be able to be controlled from a hand held controller when the handle bar is detached, or from the handlebar when it is attached. The purpose of the bendy handlebar is so the skateboard can drift and be turned by leaning and bending the handlebar Here are the needed specifications: - Maximum Speed: The electric skateboard should reach speeds of up to 30 mph. - Desired Range: The design should ensure that the skateboard can cover a range of up to 30 miles when fully charged. Ideal Skills and Experience: - Strong understanding and experience in electric skateboard des...