İşe Alınmak Üzere Electrical Design Engineers
6 sonuç gösteriliyor
Sponsorlu Freelancerlar
-
Experienced Verification Engineer with 6.4 years of experience in both IP and SoC verification along with Formal Methodology. Protocols: PCIe , AXI , AHB ,SPI , UARTExperienced Verification Engineer with 6.4 years of experience in both IP and SoC verification along with Formal Methodology. Protocols: PCIe , AXI , AHB ,SPI , UART daha az
VimalM94
adlı kullanıcıyı işe alın
-
Hello, Thanks for taking the time to review my profile! I’m an Electronics Engineer specializing in PCB and Electronics Design. With years of experience in the industry, I’ve built my business as a freelancer around being detail-oriented, punctual, and innovative whenever possible. I believe in providing my clients...Hello, Thanks for taking the time to review my profile! I’m an Electronics Engineer specializing in PCB and Electronics Design. With years of experience in the industry, I’ve built my business as a freelancer around being detail-oriented, punctual, and innovative whenever possible. I believe in providing my clients with the best possible product without breaking the bank. I offer services in many areas, including (but not limited to): ● Embedded Systems: Analog and digital circuitry design and simulation, PCB design, firmware development. ● Analog Electronics Design: Analog frontends, amplifiers, filters, mixers, and general analog circuitry for low-frequency, low-power precision applications. ● Power Electronics: Circuitry design and simulations, high power PCB design, control systems. ● RF design: RF circuitry and PCB design. I offer services for all product development stages: Proof of Concept, Prototyping, Value Analysis and Value Engineering, and Product Release. I’m well-versed in a vast array of software and tools, and believe in always keeping up to date on the most modern and revolutionary techniques. I am proficient in: ● Schematic drawing and PCB design: Altium Designer, KiCAD, EasyEDA, OrCAD and EagleCAD. ● Software simulation: NGSpice, PSpice and LTSpice. ● Firmware development: STMcube (ST Microelectronics), CCS (Texas Instruments), Segger Embedded Studio and MPLABX (Microchip and Atmel). If you’re interested in working with me, I’m available via Freelancer and will always answer your questions or requests in a timely manner. Thank you for your time and have a great day! daha az
cmsivolella
adlı kullanıcıyı işe alın
-
My name is Samuel, and I am a mechatronic engineer with a specialization in mechatronics, based in Tunisia, with over six years of experience. During this time, I have successfully delivered a wide range of projects, continually expanding my expertise and refining my skills. I am now offering my professional services...My name is Samuel, and I am a mechatronic engineer with a specialization in mechatronics, based in Tunisia, with over six years of experience. During this time, I have successfully delivered a wide range of projects, continually expanding my expertise and refining my skills. I am now offering my professional services in designing and prototyping electronic boards using Altium Designer. My PCB design expertise encompasses: Single and Multi-sheet Schematics Single/double-sided and Multi-layer PCB layouts Data and control interfaces: UART, USB, SPI, I2C, SDIO, PCIe, and more Power supply design, including SMPS & LDOs Digital video, audio, and multimedia interfaces: HDMI, MIPI DSI/CSI, I2S, TDM Reverse engineering for existing designs With a commitment to quality and precision, I am ready to bring your electronic board designs to life. daha az
tshibsamuel477
adlı kullanıcıyı işe alın
-
--- I PREFER CUSTOMER SATISFACTION THAN MONEY ---- I completed my undergraduate education in electronic engineering in 2003. In 2009, I completed the Master of Business master's program. I founded MY OWN COMPANY in 2012 and I develop electronic devices UNTIL NOW. I've designed almost every type of...--- I PREFER CUSTOMER SATISFACTION THAN MONEY ---- I completed my undergraduate education in electronic engineering in 2003. In 2009, I completed the Master of Business master's program. I founded MY OWN COMPANY in 2012 and I develop electronic devices UNTIL NOW. I've designed almost every type of controller-containing device. Microchip pic seris, arm series, pal-gal series, xc95144 cpld, etc. I have also worked on communication standards such as UART, SPI, I2C, ethernet, ethercat, modbus, can, can-open etc. I am still running MY OWN BUSINESS with my team at my business in Izmir Turkiye. I love my job very much. For this reason, I can work and I do work at any time. I have all the necessary technical equipment in my business. (Oscilloscope, signal generator, vi tracker, CNC milling machine, 3D printer, development boards, digital analyzers etc etc.) I take my job seriously while it is still in the proposal stage. I do not offer copy-paste to any project. I don't bid on a project that I think I can't finish. In the same way, I try to calculate the time I give to the project correctly. I follow SPS IPC, Emebbeded World, Electronica and other leading trade shows. I have long term Schengen visa. Therefore, I do not have a travel problem. daha az
egerobotics
adlı kullanıcıyı işe alın
-
A highly motivated FPGA Design Engineer and Project Manager with +10 years of experience. I'm always looking for new challenges and have a great thirst for knowledge. I worked for large companies as well as emerging Start-Ups developing new game-changing technologies in the fields of Medical, Defense, Automotive and...A highly motivated FPGA Design Engineer and Project Manager with +10 years of experience. I'm always looking for new challenges and have a great thirst for knowledge. I worked for large companies as well as emerging Start-Ups developing new game-changing technologies in the fields of Medical, Defense, Automotive and Communications. My experience involves designing solutions from the ground up from Specifications Characterization to High Level Design, Writing Code, Code Review , Simulation, Integration and Debugging. I'm experienced with the following FPGA families: Xilinx on Vivado: Kintex 7, Virtex 7, Kintex Ultrascale, Zynq 7000 and Zynq MPSOC (as well as older families). Altera (Intel) on Quartus: Cyclone V SOC, Arria V SOC, Stratix V and Arria 10. I've implemented the following algorithms in pure HDL (VHDL as well as Verilog): Image Enhancement, Image Rotation, Temporal 2D IIR and 2D FIR filters for noise reduction. Edge Detection, 2D Box Filter Convolutions, Sensor Dark Correction, Histogram Calculation and Equalization, Alpha Blending on Screen Overlay and Video Frame Buffering. daha az
shaitobikon
adlı kullanıcıyı işe alın
-
Welcome to PCB Must Innovations, Where Precision Engineering Meets Personal Commitment ⭐At PCB Must Innovations, every circuit and PCB isn’t just built; it’s meticulously crafted with an obsession for precision and reliability. Founded by a team of visionary engineers who dreamt of transforming ideas into impeccable...Welcome to PCB Must Innovations, Where Precision Engineering Meets Personal Commitment ⭐At PCB Must Innovations, every circuit and PCB isn’t just built; it’s meticulously crafted with an obsession for precision and reliability. Founded by a team of visionary engineers who dreamt of transforming ideas into impeccable electronic solutions, our agency has become a beacon of innovation and trust in the electronics design industry. ⭐Our Philosophy: We don’t just design; we redefine the standards of electronic excellence. Every project is a personal challenge, a chance to push the boundaries further than ever before. With over 1,000 successful projects delivered to more than 300 satisfied clients worldwide, our commitment to quality and precision is evident in every task we undertake. ⭐Our Services Include: ✅Reverse Engineering: We decode existing hardware to uncover and enhance underlying designs, improving performance and integrating modern technologies. ✅Architecture Finalization: We refine product architectures to optimize for manufacturability and marketability, ensuring a seamless transition from concept to production. ✅Technical Feasibility Studies: We assess the practicality of new product ideas, using in-depth analysis to predict market viability and technical hurdles. ✅Electronics Circuit Design: We engineer each circuit to outperform expectations, optimizing every component for superior functionality and energy efficiency. ✅PCB Design and Prototyping: We turn complex designs into high-performance, multi-layer PCBs, achieving a defect rate of less than 0.1% through rigorous precision engineering. ✅Hardware Testing: We validate each prototype with over 100 different tests, ensuring unparalleled reliability and resilience under any conditions. ⭐Industries We Serve: ✅Consumer Electronics ✅Automotive ✅Medical Devices ✅Telecommunications ✅Aerospace ✅IoT (Internet of Things) ✅Solar Energy ✅Drone Technology ✅LED Lighting Why Partner with Us? ⭐Driven by Results: We measure our success by the impact we make — reduced costs, enhanced performance, and accelerated time-to-market for our clients. ⭐Absolute Transparency: From initial sketches to final product, we keep you in the loop with real-time updates and comprehensive reports. ⭐Designed for Innovators: Our services are tailor-made for leaders and pioneers who demand nothing less than perfection. Whether you’re launching a startup or leading a tech giant, we’re here to translate your visions into market-ready innovations. Join us at PCB Must Innovations, where your visions are engineered to perfection. Let’s create something extraordinary together. Start your project with us today by visiting www.pcbmust.com or by reaching out directly for a consultation. daha az
electronicsdone
adlı kullanıcıyı işe alın
