ARM firmware with LINUX for DE10-Nano board

$1000-5000 USD

Ditutup

Disiarkan

sekitar 6 tahun yang lalu

$1000-5000 USD

Dibayar semasa penghantaran

ARM firmware with LINUX for DE10-Nano board A. Play with the evaluation board 1. Project Owner will provide a P0496 ARM Processor base on Cyclone V SE FPGA computer board (DE10-Nano board). The board will have Ethernet port and SD card. 2. Developer needs to prepare LINUX Kernel to run on embedded computer board with Ethernet TCP/IP to connect with the host PC. 3. Developer needs to prove that he/she can transfer image from the SD card to the host PC. To test the feature, we will prepare a list of pictures001, pictures002, ..., pictures010 in the SD card, plug the SD card to the DE10-Nano board, press a button, a moment later the PC will has thse pictures. B. Working on the final system: 1. Project Owner will design a Cyclone V SE ARM processor base, similar to the evaluation board, which has an Ethernet port, SD port and interface with the X-ray camera. 2. Developer needs to review the architect with Project Owner, to make sure that it is compatible with the evaluation board. 3. Developer needs to port over the firmware to the Project Owner Embedded computer board, and make it runs as in the evaluation board. 4. Developer needs to work with Project Owner to X-ray camera interface working. Project Owner will work on the hardware architect, developer need to work on the LINUX firmware architect to interface with the data from the X-ray camera. 5. Developer needs to support Project Owner on the firmware site to make the X-ray camera working as a system like this: a. When the X-ray camera capture pictures, it will transfer the pictures to the FPGA. b. Firmware will store the pictures to the SD card. c. When the X-ray camera stop working, the firmware will transfer the pictures toe the host PC. C. Timeline 1. Make the evaluation working: 10% payment 2. Make the Project Owner Embedded computer board working as the evaluation board: 20% more (30% total) 3. Making the X-ray camera interface working: 20% more (50% total) 4. Making the X-ray camera interface working perfectly: 20% more (70% total) 5. Transfer the knowledge to Project Owner: 20% more (90% total) 6. Support Project Owner 1 more week for any extra problem, question: pay in full.

Android

C Programming

Electrical Engineering

Firmware

Linux

ID Projek: 18316302

Tentang projek

15 cadangan

Projek jarak jauh

Aktif 6 tahun yang lalu

Ingin menjana wang?

Alamat e-mel

Faedah membida di Freelancer

Tetapkan bajet dan garis masa anda

Dapatkan bayaran untuk kerja anda

Tuliskan cadangan anda

Ianya percuma untuk mendaftar dan membida pekerjaan

15 pekerja bebas membida secara purata $4,091 USD untuk pekerjaan ini

@allenross356

I have reviewed your project description and I am confident that I can provide you with the solution that you require. I understand that you need an ARM firmware with LINUX for DE-10 Nano Board. I lead a team of IT experts who are very talented in android, c programming, firmware, and linux. We would be delighted to work together with you on developing a solution that would meet and exceed your expectations.

$4,000 USD dalam 30 hari

5.0

(91 ulasan)

7.4

@technorizen

Hello, I m fulltime available for work , I saw your job post and you need Android + iphone app for "evaluation board, which has an Ethernet port, SD port and interface with the X-ray camera. "and i have skills in coding similar app and i believe that i can do it for you perfectly. Please share more details to check and discuss . Looking forward with more details Thanks Technorizen

$1,000 USD dalam 10 hari

4.5

(159 ulasan)

8.4

@liveexperts123

Hi there, I have read your project description and i'm confident i can do this project for you perfectly.I still have a few questions. please leave a message on my chat so we can discuss the budget and deadline of the project. Thanks . .

$3,330 USD dalam 3 hari

4.9

(45 ulasan)

7.0

@Blast545

Hello, my name's Jorge, you may remember me. I saw once you posted the project but with "Android" and I thought you were still wondering which was the best approach for the system architecture. Probably you have a better vision by now, and that's why you are considering a Linux kernel, to communicate directly with host pc, and additional digital requirements completed using the fpga side of the device. Let me know if you still consider me as a possible candidate, and if you may have some new information of the project you want to share with me to discuss it. Thanks for your time.

$3,900 USD dalam 60 hari

4.9

(93 ulasan)

6.7

@ducdctoandh

Dear customer, I am really happy to help you out of this project. I would like to introduce that I am an freelancer with 100% JOB COMPLETED in VHDL/VERILOG. I am really suitable for job description: First: I am an Electronics engineer who is very expertise with VHDL/Verilog. In fact, I have done so many project of VHDL/Verilog(Karatsuba multiplier, Nintendo design, encryption algorithm like Sax Hash, Bernstein Hash, HummingBird...Also, I participated in a Walker Recognition project(data from Camera to Human Detection(image processing-HOG feature and Adaboost) and display in VGA). Besides,,I implemented the image conpression (wavelet transform). Aslo, I have experience in coding Booth multiplier and very familiar with Xilinx tools like ISE. and Vivado. Therefore, I can simulation the projecthe in behavior, post-syntheize... with free hesitation. I am also have experience of freelancer here: https://www.freelancer.com/u/ducdctoandh.html Also, I am very good in English (IELTS 6.0) and I have several year of researching so I can fully understand your requirement and understand fully about the papers and write the academic report. Please contact me and let me know if you want any special requirement and do with lower price. Thank you.

$5,000 USD dalam 30 hari

4.9

(32 ulasan)

5.8

@alexmalki

Dear Sir, I am Alexandre Malki an software and hardware embedded engineer. I am bidding to your offer since i think this opportunity is interesting for me and I am sure I can offer my knowledge to fulfill your tasks. I was programming on different platform such as STM32XXX (ARM Core M0 M1 M2 M3), Arduinos (Atmega), Ti MSP400, PIC32F, 8051, Allwinner ARM A53 (64 bits), TI DM3730 (A8 Core) iMx6 (Cortex A7) and so on... Also I have a great experience with FPGA (Spartan SP6) and SOC such as Zynq-7000 and the DE10-Standard. I have been developing softwares/firmware/drivers on different kind of environment, baremetal (no-OS), embedded Real Time OS (FreeRTOS, ChibiOS, Zephyr) and Linux Kernel drivers. In addition, I own all needed devices to debug and solve issue during the development (osciiloscopes, multi meter, welding devices etc...). During my previous experiences, I was creating multi-layer PCBs from scratch. I was in charge of the schematics/routing/manufacturing. I own Altium Designer which is the most famous CAD for electronic PCB. I am a motivated/communicative/thorough person and I will do everything to deliver a work of quality on time. Also when I will have any confirmation that you are interested in working wiuth me, i will ask you questions related to the XRay camera and how you plan to interface it with the HPS and the FPGA. Do not hesitate to contact me if you have any questions. I hope to hear from you. Best regards.

$4,444 USD dalam 15 hari

4.9

(4 ulasan)

5.1

@coco50511

Hello sir. Hope you are doing well. I have experience in nano pi ago. I had compiled android firmware and brought up the ubuntu firmware. I can also read the datasheet of components and schematic and pcb file. I can work full time. Thanks, regards.

$5,000 USD dalam 30 hari

5.0

(5 ulasan)

3.1

@readymakers

I am confident I am the right candidate for this project as I have done many similar projects in the past. With years of experience in this field, I believe this project will be very easy for me.

$7,750 USD dalam 8 hari

5.0

(4 ulasan)

2.9

@XiaoDongC

Hi. I’m a enginer of developing electrical devices , embedded software and service programming. We have designed several devices and have a lot of experience with PIC,AVR microcontroller, ARM processors, Raspberry Pi, and Nano Pi. Especially I have accumulated a lot of experience from the prototype design of various hardware device. You could realize your idea at a time , I can guarantee high quality of results. Regards.

$5,000 USD dalam 10 hari

3.9

(4 ulasan)

3.1

@CanvasInfotech10

Hello Sir, I read through the job details extremely carefully and I am absolutely sure and I wanted to discuss some points of Working on the final system. Can I have your time? I can achieve the results with my team of developers, designer, QA and Project Manager who will be responsible to work on ARM firmware with LINUX for DE10-Nano board. We are here for long-term relation providing development service, maintenance, and support. We are the team of 50+ employees and over past 9 years, we have completed 300+ projects in web, mobile and software application development projects. We work on iOS and Android application development, IoT software, LMS, CRM, ERP, and live streaming software. Skills: PHP & .NET Frameworks, MySQL, REST API, Javascript, Jquery, Advanced Javascript (Angular, React JS), AWS cloud, MongoDB, Express JS, Mobile application development (Android/iOS), Game Design, Game Development, Mobile App Development, Unity 3D, full stack development, frontend, and backend development, PWA, Siberian CMS, IoT applications. Our aim is your success. We are software development company who works with small to medium size of companies and help them by providing software solutions taking end to end responsibility of a product/application. This helps the customer to save a time and focus on the actual business model. Our existing solutions/services help many customers to increase business/ product usage. Awaiting for a positive response :) Regards! Akash

$4,722 USD dalam 35 hari

5.0

(1 ulasan)

1.6

@ByourMexico

Hi Empployer.. The profile of your solution sounds great its the new way to implement Hardware on Software with flexibility, these could be nice to update the hardware features in the HDL or VERILOG file to update the performance on hardware architecture. About the software, I've experience implementing UNIX and LINUX OS trying to be Real Time OS. With experience connecting the IPC (Inter Process Communication) with drivers that will manage your X Ray Hardware efficiently. My background has been implemented drivers design using C language with efficiency. Each interaction will be debugged using Jlink on SWO and Synchrone SWD to debug the performance of process vs drivers connections. Could be nice to know if you have the Digitial Processing Algorithm to process the XRay info or will be necessary to develop implement a Discrete Way to process the info. I wish solve and design your system. Regards

$3,888 USD dalam 10 hari