Plate heat exchanger ansyspekerjaan
salam bang. sy student final year kat unikl iprom. boleh x tlg buat pasal Number plate recognition guna raspberry pi. apa2 ws sy bang 0165778157
Saya ingin membuat web pertukaran crypto seperti bitcoin dll
saya mencari seorang yang boleh tolong design heat exchanger for ethanol production untuk design project sy
"MESIN PENCACAH KOMPOS Fungsi : - Mesin ini berfungsi untuk mencacah berbagai bahan (non food) untuk pembuatan pupuk kompos, dll. Spesifikasi : - Kapasitas : 500kg/jam - Dimensi (pxlxt) : 1000 x 600 x 1000 mm - Material Rangka : Mild Steel UNP 100 - Material Body : Plate SPHD 3 mm - Penggerak : Diesel 16 PK Dong Feng - Bahan Bakar : Solar - Finishing : Cat"
Figure 1 shows a thin rectangular plate with a through hole in the middle of the plate. The plate has a length (L) of 750 mm, a width (W) of 500 mm and thickness (t) of 2 mm, while the hole through the middle of the plate has a diameter (D) of 385 mm. A tensile load (F) of 20,000 N is applied at each end of the plate. The plate is made from a solution treated and aged nickel-based superalloy (Inconel 718). Its behaviour is elastic-plastic according to the data below. Figure 1: Plate with a central hole You can assume the following information: Yield strength = 1186 MPa UTS = 1400 MPa @ engineering strain of 15% Young’s modulus, E = 200 GPa Poisson’s ratio, υ = 0.3 I. Using a suitable FE software such as ABAQUS (or an al...
...Design Inputs for Support System: Specific structural inputs tailored to Hilti’s product selection for pipe support systems. Requirements Proven expertise in structural analysis of piping systems. Experience with chilled water systems and pipe supports. Familiarity with industry standards (e.g., ASME, local building codes). Proficiency in relevant tools (e.g., CAESAR II, ANSYS, SAP2000). Strong ability to present technical findings in tables, graphs, and diagrams. Proposal Submission Include the following in your proposal: Summary of qualifications and relevant projects. Approach to the analysis and report preparation. Estimated timeline for completion. Proposed fee for the project. Deadline for Submission Submit all proposal...
... Design Inputs for Support System: Specific structural inputs tailored to Hilti’s product selection for pipe support systems. Requirements Proven expertise in structural analysis of piping systems. Experience with chilled water systems and pipe supports. Familiarity with industry standards (e.g., ASME, local building codes). Proficiency in relevant tools : (CAESAR II, ANSYS, SAP2000). Strong ability to present technical findings in tables, graphs, and diagrams. Proposal Submission Include the following in your proposal: Summary of qualifications and relevant projects. Approach to the analysis and report preparation. Estimated timeline for completion. Proposed fee for the project. Deadline for Submission Submit all proposals v...
I'm looking for a Python script that leverages RoBERTa to automate the identification of potential candida...sentiment label mapping, and implementing data augmentation and class balancing. - Analysis and Evaluation: The script should perform correlation analysis and generate a heat map. The model's effectiveness should be evaluated using metrics like accuracy, F1 score, precision, recall and determining optimal thresholds. Also, the model should prioritize: - Technical skills - Management experience - Educational background Ideal Skills: - Proficiency in Python and RoBERTa - Experience with data preprocessing and analysis - Ability to implement and evaluate machine learning models - Familiarity with generating and interpreting heat maps - Understanding of recruit...
I'm looking for an engineer or a designer who can create a very low-cost water heating system for industrial use. Key Requirements: - Consideration of various energy sources (solar, electric, gas or a combination) - Focus on minimizing costs without compromising essential functionalities - Understanding of industrial water heating needs Ideal Skills: - Expertise in thermodynamics and heat transfer - Experience in designing cost-effective industrial equipment - Proficiency in evaluating and integrating various energy sources The goal is to create the most economical solution possible while ensuring the system meets industrial heating demands.
...(the plans of the appt that is stored in the main db table that is accessed by the location+_apartment key) and a series of check boxes Type of paint: premium, standard, cheapest Paint condition: bad (3 coats of paint) regular (2 coats of paints) good (one coat of paint) Paint baseboard?: slider yes/no Paint doors?: slider yes / no Paint roof?: slider yes /no Change Switch Plates?; yes / no (Wall Plate are cover that goes over light switches and outlets) Calculate total button when pressing the calculate total button the row that uses the key location+column that stored the plan of the apartment will add the values of the selected options and display a value. Total: 7.389.721 (for example) And a contact us button will send them to the register page that will have also have a m...
...on a learning journey with Qualtrics and need a custom offer for a project build. I've set up a survey and now need help creating an Employee Engagement Dashboard and a Guided Action Plan. Key Requirements: - The primary focus of the dashboard is to discover areas that are impacting managers' engagement scores. - It should include specific data visualizations such as Bar charts, Pie charts, and Heat maps. - We need to track several specific metrics for manager engagement scores including the Response rate, Satisfaction levels, and Engagement trends over time. Ideal Skills and Experience: - Extensive experience with Qualtrics and survey analysis. - Proficiency in data visualization and interpreting employee engagement metrics. - Ability to create comprehensive and use...
I require a specialist to utilize COMSOL to design and optimize a shell and tube heat exchanger for use in cardio pulmonary bypass (CPB) machines. The heat exchanger will be dealing with two fluids: blood and water. The project involves: - Utilizing an existing COMSOL design (air and water) as a baseline - Optimizing the design to assess the impact of different materials and pipe diameters - Considering various types of flow and pipe configurations, such as dimpled and smooth pipes - Focusing on the specific demands of CPB machines for blood warming and cooling The ideal candidate will have: - Extensive experience with COMSOL and heat exchanger design - A deep understanding of fluid dynamics, particularly in relation to blood and water - Knowledg...
I need a simulation of particle reinforced metal matrix composites to be conducted in any FEM software, preferably COMSOL or Abaqus. Key Requirements: - The primary purpose of this simulation is to conduct a thermal and displacement analysis. - I am particularly interested in evaluating the effect of particles on thermal conductivity due to thermal heat on a 2D surface. Ideal Skills: - Extensive experience with FEM software, especially COMSOL or Abaqus. - Strong understanding of thermal and displacement analysis. - Knowledge of metal matrix composites and their properties.
...Chemist and works with gases and liquids - image insert caricature / cartoon picture of me standing at Lab bench with safety googles and a white lab coat on, with test-tubes and liquids and bubbles etc. I could have a sore tummy at bedtime - image a picture of Lucas with sore tummy in bed, his face looking sore. I could struggle to eat my lunch or tea - image Lucas sitting at a table with his plate still full. I could pass lots of wind, like a big whoopie Cushion - image lucas bent over or sitting down, and passing a lot of wind I could sit on the toilet and find it hard to pass a poo - image Lucas sitting on a toilet with his head in his hands, looking bored I could vomit air and it would sound like a dinosaur escaping - image Lucas bending over toilet being seek making a ...
I need Electric and Magnetic field plotting using ANSYS methodology. I will provide the following details 1. Transmission tower dimensions 2. Operating voltage value 3. Different current scenarios. I need a 2D cross section of the E-Field and H-Field mapping from source till +100 and -100 metres distance. An example of this is provided in the image attached below.
...recommendations. The vibration analysis report will include frequency-response data, vibration amplitude charts, and recommendations for structural adjustments. 10. Timeline The expected completion time for the project is 14 to 21 days, including CAD modeling, CFD, FEA, and vibration analysis. 11. Additional Notes The freelancer must have experience with CFD, FEA, and vibration analysis tools such as ANSYS or SolidWorks Simulation. Regular updates and communication are required for feedback and revisions. The design must be manufacturable and include tolerances suitable for production....
...designs should be versatile, but maintain a high radiant level of luxury elegance and sophistication. Key Task: *Designing and engineering luxury furniture pieces *Creation and integrating mechanical, mechanism, components, and functionality into each design *3D/4D renderings (inner and outer layered design) *2D designs *CAD ready designs *Sewing/stitching pattern and designs *Structural analysis (ANsys) *BOM and BOL list *Manufacture instructions/guide Key requirements: *Versatility with hands-on expertise and a thorough understanding of furniture design and engineering, with a keen sense for current trends and techniques on a broad variety of luxury furniture production. *Experience in designing upholstered and solid wood (carvings) furniture *Ability to visualize with a keen...
Pleas read carefully all txt and attached document and if doable than only bid and pls bid the actual cost of executing this project and not just as any price I'm seeking a skilled professional to help in creating a seamless and engaging virtual trade fair experience that surpasses the traditional in-person events. Key Requirements: - Platform: The virtual trade fair should be accessible through both web-based and mobile app platforms, offering a versatile user experience. - Interactive Features: The platform should have live chat functionality for real-time interactions, virtual booths for exhibitors to showcase their products, and webinar sessions for insightful discussions. - Scalability: The system should be able to support between 100 to 500 exhibitors and attendees, ensuring ...
...LED for normal operation. Green LED Flash green for cherging Red LED for battery flat or out of licence Red LED for license issues (flashing faster as expiration approaches). Use an NPN transistor to drive LEDs based on MCU output. Flashing Red: License code required (increasing frequency approaching expiration). Solid Red: License expired. Cooling and Enclosure Cooling: Passive cooling with heat sinks on key components. Enclosure or electronics: Approximate dimensions: 30 x 50 x 25 cm.( negotiable) Firmware and Features Firmware: Handles license validation, timer logic, and fast charging protocols. Allows firmware updates via USB Port 1. Charge Management: Logs the number of charges provided within the license period. Solar Panel Specifications Must support charging...
I'm looking for a language learning partner who specializes in English-Chinese exchanges. The primary focus will be on improving my speaking skills through one-on-one conversations. Ideal Skills and Experience: - American or live in America(must) - Experienced in language teaching or tutoring - Good conversationalist with patience and understanding - Flexible and ready to adapt to different conversation topics - Creative in creating engaging and educational conversation scenarios Please note, the goal is to enhance my speaking skills in a supportive and interactive environment,and if you would like to learn Chinese , that would be perfect !
I'm looking for a professional with experience in 3D design and mold creation for rubber gloves. The project involves designing heat-resistant plastic molds for hands and wrists. These molds will be used for manufacturing athletic-related rubber gloves. Details: - The molds should represent basic hand and wrist shapes, with some raised features for grip and the company logo. - The textured surface is intended to provide grip on the gloves. - The company logo needs to be incorporated into the mold design. Ideal Skills: - Proficiency in 3D design software. - Prior experience in glove or similar product design. - Ability to create molds for heat-resistant plastic. Please provide your portfolio showcasing relevant work.
Work with me for up to four hours to develop a Looker Studio report, blending Google Search Console and Google GA4 Analytics, comparing landing pages using a date control. Report columns: Landing page, impressions, url clicks, previous vs current sessions, and absolute change (heat mapped), comparing current 28 days, with the same period one year ago. Must work with Ultraviewer, Anydesk, etc., and do the work on my workstation.
Note: Please read before bidding, I have mentioned all the details in the PDF so increasing the bidding price later will not be accepted. Check the PDF attached for a detailed description. Objective: Design a pasteurization room that uses steam to heat 3,200 glass bottles (330 ml each) per batch. The goal is to uniformly raise the bottles from ambient temperature to the pasteurization temperature without localized overheating. Key Details: - Bottle & Pallet Setup: Each crate holds up to 32 (330 ml each). Each pallet holds 49 crates (7 crates by 7 crates configuration). Pallet dimensions: 1200 mm x 1000 mm. Room Layout: - Designed with front and back doors to allow forklift loading/unloading inside the room. - Insulated with PUF panels to maintain high thermal efficiency. - S...
I need an experienced Cronus Zen scripter to create a simple script for MLB The Show 24. The script should automatically move my PCI (plate coverage indicator) towards the ball while batting, allowing me to only focus on hitting the swing button (the X, square and Circle buttons on PS5). The PCI movement should be smooth and gradual. Additionally, I would like the script to include strike zone assistance. The deliverable is an MLB The Show 24 script that works seamlessly after I turn it on via the Zen Console.
I am seeking a COMSOL expert to assist me in simulating laser material processing. I've previously worked with heat transfer in solid physics, but now I need to transition to heat transfer in solid-liquid physics to examine several key aspects: - Phase change (this is the most critical aspect for this simulation) - Melt pool dynamics (I aim to achieve an accurate understanding of this) - Fluid flow velocity - Temperature distribution - Deformation I already have the necessary data and files for the simulation. For someone with expertise in this field, this project should be straightforward and could be completed in just a few hours. Please reach out if you're proficient and familiar with this area. Thank you.
Looking to Have a Custom Design Case and 3D Print of a Raspberry Pi 5 With Attachments. Project Description: I am seeking a skilled designer to create and possibly...Raspberry Pi 5 with Active Cooler:** 85.6mm x 56.5mm x 20mm. - M.2 HAT with SSD: Add approximately 80mm x 30mm x 5mm to the stack. - 4G GNSS HAT: Approximately 65mm x 56mm x 10mm. - Total stack height is estimated to be around 70mm-80mm, allowing clearance for connectors and airflow. Material Preferences: - High-quality 3D printing filament (e.g., PLA+, PETG, or ABS) suitable for durability and heat resistance. Notes: - Provide CAD files and 3D print files for future reprinting or modifications. - Highlight any unique design features in your proposal. - If possible, provide cost estimates for both design and printing...
I'm looking for an experienced designer who can create 3D print files for a model house. This house should be moderately detailed with textures and should include specific components such as a heat pump and a solar panel. The model house will be used for an indoor tabletop display. Key Requirements: - Creation of 3D print files for a model house. - Inclusion of specific components: a heat pump and a solar panel. - Moderate detailing with textures. Ideal Skills: - Proficiency in 3D modelling software. - Experience in designing for 3D printing. - Understanding of environmental and structural design for model houses.
I'm seeking a professional to design and construct a metal enclosure room around electrical cabinets located on top of an overhead crane. Objectives: - The primary purpose of this enclosure is to provide environmental protection. The enclosure must shield the electrical cabinets from dust and debris, moisture and humidity, as well as heat and temperature fluctuations. - The selected material for this construction is metal. The design should take into account the durability and strength of metal to ensure the cabinets are adequately protected. Ideal Skills: - Extensive experience in metal construction and design. - Knowledge of environmental protection standards for electrical equipment. - Ability to construct a secure, durable, and efficient enclosure room. Please include s...
Project Brief for Steam Pasteurization Room Design Objective Design and implement a steam-based pasteurization system for a tunnel-like room to effectively heat 3,000 glass bottles (330 ml each) at a time, ensuring even heat distribution without direct overheating. Transition from an existing water spray system to a more efficient steam system. Bottle and Pallet Configuration • Total Bottles: 3,000 (40 bottles per crate, 37-38 crates per pallet). • Pallet Configuration: Two pallets, each 1200 x 1200 mm, stacked with crates. The pallets will be arranged one behind the other (front and back) with a 100-200 mm gap around each pallet for movement. Current Setup • Existing Chamber: Currently using a water spray system which is inefficient in terms of heating ...
I need assistance with validating a research paper using Ansys. I am currently pursuing my Mtech and have a mid-project review coming up. This task is straightforward and I just need some suitable results to present at my review. The analysis will focus on: - Fluid dynamics , Heat transfer , Phase Change The material under analysis will be: - PV modules, specifically: - Polycrystalline PV modules - PCM ( Phase Change Material) Skills and experience that would be beneficial for this project include: - Proficient in using ANSYS software - Understanding of fluid dynamics , CFD and Heat transfer - Ability to deliver reliable results in a timely manner.
...(for iOS and Android) that connects users with local businesses (restaurants, bars, gyms, etc.). The app will provide real-time data about how busy these locations are and include various additional features for user engagement and business insights. Key Features to Include User Features: Search and filter businesses by category and location. View real-time "busyness" levels for each business. Heat map showing high-traffic areas. Navigation to selected locations. Reviews and ratings for businesses. Option to save favorite businesses. Business Features: Business profiles with essential details (name, location, ratings). Analytics dashboard for tracking customer engagement and traffic trends. Ability to run promotions or sponsored listings. Additional Features: Partne...
...the most efficient design. The project involves creating CAD models for each AWE system in SolidWorks and conducting CFD simulations using ANSYS Fluent to analyze their performance under various wind conditions. Key Deliverables 1. CAD Models in SolidWorks: o Design detailed 3D CAD models for the two AWE systems:  Kite-Based System  Tethered Balloon (Aerostat) System o Ensure models are optimized for aerodynamic analysis, including critical features like airfoil shapes, tethers, and structural components. o Deliver models in SolidWorks file format (.SLDPRT) and exported compatible formats (.STEP, .IGES) for CFD simulations. 2. CFD Simulations in ANSYS Fluent: o Conduct CFD simulations for both CAD models to analyze:  Lift-to-drag ratios.  Pressure distribution and flow...
I'm seeking a skilled professional to incorporate a logo into an STL file for a 3D figure/model. This integration aims for personalization of the model. Key Requirements: - The logo needs to be engraved into the surface of the 3D model, not raised off it or as a separate piece. - Experience with 3D modeling software...into an STL file for a 3D figure/model. This integration aims for personalization of the model. Key Requirements: - The logo needs to be engraved into the surface of the 3D model, not raised off it or as a separate piece. - Experience with 3D modeling software and STL files is essential. - A portfolio demonstrating previous similar work will be appreciated. - Easy logo and it should be in a plate I look forward to your bids and am excited to work on this pr...
...(COâ‚‚), methane (CHâ‚„), and nitrous oxide (Nâ‚‚O). These gases trap heat in the atmosphere, creating a "greenhouse effect." Key Causes: 1. Burning Fossil Fuels: Coal, oil, and natural gas release COâ‚‚ when burned for energy. 2. Deforestation: Trees absorb COâ‚‚; cutting them down reduces this effect. 3. Industrial Processes: Manufacturing releases gases and chemicals that trap heat. 4. Agriculture: Livestock and farming practices emit methane and other gases. Major Consequences: 1. Rising Temperatures: Earth's average temperature has risen by about 1.1°C (2°F) since the late 19th century. 2. Melting Ice Caps: Polar ice sheets and glaciers are shrinking, contributing to rising sea levels. 3. Extreme Weather: Increased heat leads to mor...
I’m in need of a detailed inspection report for insurance purposes, focusing on the technical specifications of air-source heat pumps. The report should include: A comprehensive analysis of the installation procedures for the heat pump. Detailed information about the maintenance requirements, including specific tasks and recommended schedules. The report is required for insurance purposes, so accuracy and thoroughness are essential. Please let me know if you can assist and provide an estimate for the work.
I need a skilled web developer to create a modern and minimalist personal portfolio website. The site will showcase my research, publications, skills, and useful resources, primarily to attract academic collaborators. Key Features: - Home Section: A brief introduction and an inspirational quote. - Skills & Expertise Section: Highlighting my technical proficiencies (e.g., LaTeX, CFD, Ansys FLUENT). - Projects & Publications Section: Listing my research highlights, thesis, and journal articles. - Useful Links Section: Featuring academic resources and courses. - Contact Page: With an integrated form for inquiries. - Social Links: To my LinkedIn and faculty page. The design should be simple, professional, and mobile-responsive. I can provide additional content and assets as ne...
I'm looking for an expert who can develop a User Defined Function (UDF) in ANSYS Fluent for analyzing the aerodynamic performance of a foldable flapping wing. The project should be completed within a week. Key Focus: - The primary focus is on the aerodynamic performance of the wing. - Critical parameters for analysis include lift and drag forces, as well as flow patterns around the wings. Refer: Reference: Guerrero, J. E., Pacioselli, C., Pralits, J. O., Negrello, F., Silvestri, P., Lucifredi, A., & Bottaro, A. (2016). Preliminary design of a small-sized flapping UAV: I. Aerodynamic performance and static longitudinal stability. Meccanica, 51, 1343-1367. Video: Refer above, before confirming your bids. Requirements: - The analysis should be done
...This database will not only store customer contact information but also help in managing invoicing and conflict checks. Database Requirements: - Storing customer contacts: The database should hold each customer's name, email address, phone number, address, service history, and preferences. - Vehicle Information: For each vehicle, we need to store details like the vehicle make and model, license plate number, and service history. - Invoicing: The database should have a section for managing invoices. - Conflict Checks: It should also help in tracking potential conflicts. Ideal candidates for this project should have: - Proven experience in database creation and management. - Familiarity with customer service tracking and invoicing systems. - Excellent attention to detail to...
I am creating an AAU basketball team that is based in Boise, Idaho and I need a logo for it. The logo needs to have our team name; JBL Elite. Please take inspiration from the Miami Heat Vice edition logo, which I have attached below. I would like the colors to be vibrant, ones that would pop out. Please make a few versions so I can have a choice.
I am creating an AAU basketball team that is based in Boise, Idaho and I need a logo for it. The logo needs to have our team name; JBL Elite. Please take inspiration from the Miami Heat Vice edition logo, which I have attached below. I would like the colors to be vibrant, ones that would pop out. Please make a few versions so I can have a choice.
...Region Theme: Chaos, danger, and transformation. Visual Design: Volcanic landscapes with lava rivers and burning forests. Magma pits with spiraling flows, creating high-risk traversal zones. Smoky atmosphere with glowing embers floating in the air. Gameplay Objectives: Combat challenges: Feuerelementare, fire-resistant creatures, and environmental hazards. Introduce environmental mechanics: heat zones, requiring fire-resistant gear. Rare fire-based crafting materials and puzzles involving lava flow manipulation. Key Locations: Volcano Core: A dungeon-like area with high-level enemies and rare loot. Forgotten City: Lava-covered ruins hiding ancient artifacts. Elemental Forge: Allows crafting of fire-based weapons or tools. Zone Size: ~5-7 tiles, visually intimidat...
...food on trees and among the bushes like you.” Tom eagerly agreed: “And I want to climb walls and search for food like you. Just thinking about it makes me so happy!” A few days later... Tom realized that his hands and feet weren’t as sticky as Pen’s. He sighed: “I can’t climb walls like Pen, nor can I hunt for food the way Pen does. I’m so hungry!” Meanwhile, Pen struggled with the intense heat of the day. He exclaimed: “My skin isn’t like Tom’s. It’s too hot! I can’t hunt for food under the sun. I’m starving!” Finally, the two friends decided to switch back to their original lives. Tom returned to his beloved tree, happily searching for food during the day. Pen went back to hi...
Pleas read carefully all txt and attached document and if doable than only bid and pls bid the actual cost of executing this project and not just as any price I'm seeking a skilled professional to help in creating a seamless and engaging virtual trade fair experience that surpasses the traditional in-person events. Key Requirements: - Platform: The virtual trade fair should be accessible through both web-based and mobile app platforms, offering a versatile user experience. - Interactive Features: The platform should have live chat functionality for real-time interactions, virtual booths for exhibitors to showcase their products, and webinar sessions for insightful discussions. - Scalability: The system should be able to support between 100 to 500 exhibitors and attendees, ensuring ...
Work with me for up to two hours to finish development of a Looker Studio report comparing landing pages with a date control. Report columns: Landing page, previous vs current sessions, change, and percent of change (heat mapped), with the periods selected by the date control. I have the blend done on Google GA4 data, and the report started. Must work with Ultraviewer, Anydesk, etc., and do the work on my workstation.
I need a model in MATLAB that helps optimize processing parameters by simulating the behaviour of a heat transfer and processing plant system. Specifically, I want to focus on: - Temperature distribution: Understanding how heat is transferred and maintained throughout the system will be crucial for optimizing processing parameters. - System efficiency: We need to be able to assess how changes in processing parameters affect the overall efficiency of the system. This also includes system starting sequence and time to obtain optimal working parameters (equilibrium state). Ideal freelancer for this project should be proficient in MATLAB and have strong experience in modelling and optimization in thermal and processing systems. Ideally Simulink -fluid proficient.
This UDF (User Defined Function) is designed to model the transpiration phenomena of tomato plants in a simulated environment using ANSYS Fluent. The UDF calculates thermal and moisture exchanges based on environmental parameters such as ambient temperature and relative humidity, considering the plants as porous parallelepiped blocks. The objective is to understand and simulate the impact of climatic conditions on the internal dynamics of the plants. The code initializes the internal temperature and water fraction within the domain's cells. It employs empirical and physical relations to estimate stomatal and aerodynamic resistances, heat flux, vapor pressure difference (DPV), and convection properties based on flow regimes (natural, mixed, or forced convection). The UDF ...
Sila Dafter atau Log masuk untuk melihat butiran.
I'm looking for an expert in ANSYS Fluent and fluid dynamics analysis to perform a PCM heat sink analysis. Key requirements: - Proficient in ANSYS software with a focus on Fluent - Extensive experience in fluid dynamics analysis - Familiarity with PCM heat sink technology - Capable of providing detailed CFD simulations and flow modelling Your expertise will help assess the thermal performance and efficiency of the PCM heat sink under various conditions.
I am creating an AAU basketball team that is based in Boise, Idaho and I need a logo for it. The logo needs to have our team name; JBL Elite. Please take inspiration from the Miami Heat Vice edition logo, which I have attached below. I would like the colors to be vibrant, ones that would pop out. Please make a few versions so I can have a choice.
I am creating an AAU basketball team that is based in Boise, Idaho and I need a logo for it. The logo needs to have our team name; JBL Elite. Please take inspiration from the Miami Heat Vice edition logo, which I have attached below. I would like the colors to be vibrant, ones that would pop out. Please make a few versions so I can have a choice.
