Heat exchanger thermodynamicspekerjaan

I would like to design the best coil design and shape suppor...seeking an expert in COMSOL, ANSYS Maxwell, or FEMM who specializes in Multiphysics modeling. The focus will be on combining different physical phenomena, specifically: - Simulating Electromagnetics and Heat Transfer - Simulating Electromagnetics and Structural Mechanics You will primarily assist with the modeling and geometry aspects of these simulations. Ideal skills for this project include: - Proficiency with COMSOL, ANSYS Maxwell, or FEMM - Extensive experience in Multiphysics modeling - Ability to create complex geometries and models - Strong understanding of electromagnetics, heat transfer, and structural mechanics - Excellent attention to detail Please provide examples of similar projects you've ...

I'm seeking a skilled professional to program Modbus for my heat pump & heating system for an 8 bed farmhouse. The primary objectives of this project are to enable temperature monitoring, facilitate control adjustments, pump automation, Summer / Winter mode and other automation through the Modbus interface. Key Requirements: - Implement temperature monitoring functionality within the Modbus programming. - Allow for control adjustments via Modbus. - Program the Modbus to communicate over the RS485 interface. Ideal Skills and Experience: - Extensive knowledge and experience with Modbus programming. - Familiarity with heat pump systems and fan coil units. - Proficient in working with RS485 interface. - Capable of delivering a reliable and efficient programming soluti...

I need a heat map created that visualizes the movement of a fire in Butte County using satellite imagery. Ideal Skills and Experience: - Proficient in creating heat maps - Experience working with satellite imagery - Understanding of fire movement patterns - Excellent attention to detail - Ability to deliver a high-quality, accurate map

...generator with low current output (less than 10 mA) to ensure non-lethal performance. Estimated Price: USD: $35 - $85 EUR: €30 - €75 GBP: £25 - £65 Where to Buy: AliExpress, Amazon, eBay. 2. Tungsten or Copper Electrodes: Component: Tungsten or copper electrodes. Purpose: These electrodes will conduct the electrical discharge and direct the plasma arc towards the target. Tungsten is ideal due to its heat resistance. Specifications: Tungsten electrodes or copper alternatives, resistant to high temperatures. Estimated Price: USD: $6 - $18 (for a set of electrodes). EUR: €5 - €16 GBP: £4 - £14 Where to Buy: AliExpress, eBay, Electronic supply stores. 3. High-Capacity Capacitor: Component: High-capacity capacitor (470 uF or higher, 400V). P...

I'm looking for a talented character designer to create a hero for a realistic game. This character should embody a kind and compassionate personality, standing out as a beacon of empathy and understanding in the heat of adventure. Ideal Skills: - Character design for realistic games - Understanding of creating diverse personality traits - Ability to infuse empathy into character design - Proficiency in 3D modeling and animation software - Skills in storytelling through character design Experience: - Previous work on hero character design - Portfolio showcasing realistic game character design - Experience in designing kind and compassionate characters - Examples of character design that resonates with players

I have a project that involves simulating heat exchange processes in Aspen Plus using laboratory data. The project includes answering discussion questions based on the simulation results. Your tasks will include: - Using flow rates and data from a pellet stove and heat exchanger to run simulations in Aspen Plus. - Analyzing the output of the simulations to answer questions from a discussion sheet. The ideal candidate will have: - Extensive experience with Aspen Plus, particularly in simulating heat exchange processes. - Strong analytical skills to interpret simulation results and answer discussion questions. - Excellent understanding of flow rates and heat exchange mechanisms. Please note, I will provide the specific discussion questions and lab data. ...

I'm se...would appreciate input from the designer. Your creative input will be valuable in helping to visualize and effectively communicate the system. Your responsibilities include: - Designing intuitive and visually appealing dashboards, widgets, and custom visualizations - Incorporating specific examples we provide, including floor plans, charts and graphs, gauges and meters, HVAC Systems, and Heat Exchanger Systems Ideal skills for this job include: - Proficiency in creating 3D graphics - Experience with Distech Controls and ECNET Tridium Niagara systems - Ability to interpret and visualize system flow diagrams - Strong communication skills for collaborative design process Please provide a portfolio of your previous Designer work, particularly for Tridium Niagar...

I need a bold and vibrant label design for some hot sauce bottles. The design should be fun and creative, resonating with our identity as a construction business. The label will carry the slogan "Building the Heat". Key elements to include: - Construction tools and equipment - Spicy chili peppers - A mascot or character Ideal skills for this project include graphic design, branding experience, and a flair for creating captivating, fun designs.

I'm looking for a professional HVAC designer to help me create a new duct system for a 40,000btu residential heat pump. The successful freelancer will have experience in designing duct systems for residential heat pumps and will be able to deliver a comprehensive duct design plan. Ideal Skills: - HVAC Design - Duct System Design - Residential Heat Pump Experience Please provide examples of similar projects you've completed in your proposal.

I am seeking a Star CCM+ expert with a robust background in heat transfer, specifically convection, and fluid mechanics, particularly laminar flow. The project requires to simulate thermal boundary layer in a square dict Ideal skills and experience for the job: - Proficiency in Star CCM+ - Solid understanding of heat transfer principles, particularly convection - Expertise in fluid mechanics - Experience with laminar flow analysis - Strong CFD simulation skills - Background in mechanical engineering is a plus

I need urgent assistance to remove my hair extensions. They were installed with wax and heat five months ago, and they are now tangled. - Type of Extensions: The extensions are Keratin or Hot Fusion, which means they are wax-heated. - Condition: My natural hair is slightly damaged but not severely. I have been unable to find a local hairdresser willing to remove them because they were installed in a different country (Portugal). Time is of the essence as the extensions are causing more tangling the longer they remain in. Ideal freelancer should have experience with hot fusion extension removal, hair repair and maintenance, and be able to work delicately and efficiently to prevent further damage to my hair.

...simulate and validate the thermo-mechanical effects of Hot Roll Bonding of Aluminium as per a specific research paper. Key Requirements: - Perform a comprehensive simulation covering heat distribution, material deformation, and bond strength - Generate outputs including temperature profiles, stress-strain curves, and bonding efficiency - Compare simulation results with experimental data for validation - Simulate the experiment using the data strictly from the research paper. - Use Simulink for the simulation. - Focus on temperature distribution and stress-strain behavior. - Clearly mention the boundary conditions (heat flux) and equations used. - Write the code in simple, understandable language. - Provide the entire code and final results. After the successful simulatio...

...allows for adequate thermal management, with vias to a heat sink layer (usually aluminum). 2. Power Management: Use constant current LED drivers to power each board at 200W. This can be split into multiple strings, each driven by a current source (around 700mA to 1A per string, depending on the Vf of the chips). Ensure the design can support sufficient cooling, either passive (heatsinks) or active (fans). 3. PCB Design Considerations: Thermal Management: Ensure proper heat dissipation using large thermal vias under the LED chips connected to a metal-core PCB or thick copper layers. Trace Width: Ensure the traces are wide enough to carry the current needed to power 200W per bar (calculate the trace width to avoid voltage drops and heat generation). Channel...

Project for Asad to solve thermal equations on friday 18th

...dynamic color palette in the bird attachment, blending bold tones that draw attention and exude creativity. Logo Animation: Bring the YES WE CAN DESIGN logo to life, similar to the artistic approach in the bird photo. Incorporate depth, shading, or motion effects that make the logo stand out and emphasize our brand's personality and vision. The sides should have custom clothing, embroidery designs, heat press and custom clothing showing customers that they can get custom clothing in a unique way that is colorful and detailed QR Codes: The top of the table cover must feature QR codes for our website, Cash App, and Venmo. These should be clearly visible and seamlessly integrated into the design Located in the bottom right corner of the top of the table over Deliverables: ...

I'm seeking a seasoned mechanical engineer with a strong emphasis on thermodynamics and heat transfer. The primary focus of this project is to solve mechanical engineering problems. Must have the capacity to solve such problem in a short time length: Consider a turbogas plant characterized by the following operation process: - the compressor draws in air (??? = 1.004 kJ/kgK , ?? = 1.4) from the environment (20 °C and 1 bar) and it compresses it to a pressure of 9 bar, with a polytropic efficiency of 0.85; - after being compressed, the air enters the combustion chamber, which has an efficiency of 90 %, and is mixed with the fuel; - following combustion, the fluid (??? = 1.104 kJ/kgK , ?? = 1.35) reaches the temperature of 850 °C and enters the turbine, which ha...

I'm looking for a skilled web developer with experience in data visualization and real-time data handling to create a data analytics website focused on the stock market. The site will feature various types of data visualizations, including line charts, bar charts, and heat maps. Key Features: - Visualization: The use of line charts, bar charts, and heat maps for displaying stock market data. - User Access: The site should cater to registered users and guests, with appropriate access levels for each. - Data Source: The primary focus will be on the NSE (National Stock Exchange of India). Ideal Skills: - Proficient in web development, particularly in creating interactive data visualization tools. - Experience with real-time data handling. - Understanding of stock market ...

อยากทราบค่าใช้จ่ายในการป้องกันหินปูน (limescale), ตะกรัน (fouling/sediment) และการกัดกร่อน (corrosion) ในระบบ cooling tower, chiller, AHU, heat exchanger, condenser สำหรับ flow rate 10-1200 m3/ชั่วโมง : 1) ค่าใช้จ่ายเกี่ยวกับ softener (ระบบผลิตน้ำอ่อน) (ค่าตัวเคมี, ค่าดูแลระบบ. ค่าอุปกรณ์ต่างๆ, ค่าแรง, etc.) 2) ค่าใช้จ่ายเกี่ยวกับระบบเคมีบำบัดในน้ำเฉพาะที่เกี่ยวกับตะกรัน, หินปูน และ corrosion/กัดกร่อน (ค่าตัวเคมี, ค่าบำบัดน้ำทิ้ง. ค่าดูแลระบบ. ค่าอุปกรณ์ต่างๆ, ค่าแรง, etc.) 3) ค่าใช้จ่ายเกี่ยวกับการล้างหินปูน ตะกรัน และการกัดกร่อน (ค่าตัวเคมี, ค่าดูแลระบบ. ค่าอุปกรณ์ต่างๆ, ค่าแรง, etc.) ตัวเลขแบบคร่าวๆได้เลยครับ แค่อยากพอมีไอเดียคร่าวๆ อาจจะยกตัวอย่างมาสัก 5 เคส (เช่น ตัวอย่าง flow rate 20 m3/ชั่วโมง, 60 m3/ชั่วโมง, 120 m3/ชั่วโมง, 600m3/ชั่วโมง, 1200 m3/ชั่วโมง) ถ้าเป...

I have a JPEG image that needs to be enhanced for clarity and resolution to be suitable for use in Cricut Design Space for a heat press image. The image cleanup should include sharpening details, increasing resolution and removing noise. Ideal Skills: - Proficiency in image editing software (e.g., Adobe Photoshop, Illustrator) - Experience with preparing images for Cricut Design Space - Attention to detail - Ability to enhance image quality without compromising its integrity Please bid if you can deliver a high-quality, clean image ready for heat press application.

I'm looking for a comprehensive heat map of criminal activity in Sydney, specifically focusing on home burglaries over the past year. This project is crucial for a security startup I'm planning. The successful freelancer will: - Source and analyze relevant crime data from the past year. - Create an easily interpretable heat map showing the intensity of these crimes across different suburbs in Sydney. Ideal skills and experience include: - Proficiency in data analysis and visualization. - Prior experience with mapping software or similar projects is highly desirable. - A good understanding of crime statistics would be a plus. - Excellent communication skills to convey the findings in a clear and concise manner. This map will serve as a starting point f...

...2-2BHKs per floor or 1-2BHK and 2-1BHKs per floor. - A 3BHK with a pooja room and a study/WFH setup on the 4th floor. - Each bedroom should have a balcony and well-sized bathrooms. - Penthouse/Home theatre with dual functionality. - A small, top-floor lawn that doesn't impact the slab. - The 4th floor should have plenty of natural light and ventilation. - Contemporary terracotta elevation to mitigate heat. - Ground floor with a Watchman room and a 1RK room, along with parking space. - Parking spots for 4 cars and 6 bikes. - If feasible, a dog kennel setup. - Space allocated for a generator. Ideal skills for the job include architectural design, knowledge of current building trends, and experience with creating plans for rental properties. Understanding of ventilation and na...

I'm in need of a skilled mechanical engineer who can assist me with exercises related to both thermodynamics and mechanics. Must have the ability to solve such exercises: —Consider a steam engine plant that operates according to the ideal Rankine cycle with saturated steam. A steam turbine plant operates with a pressure at the condenser equal to pcond. The steam title at the turbine outlet is equal to X. Pressure losses in the steam generator are assumed to be negligible. The plant uses a fuel whose lower calorific value is equal to PCI and the inlet flow rate of this fuel is equal to mcomb. Determine: - Net specific work of the steam plant [kJ/kg] (worth 5/30) - Net efficiency of the steam plant (worth 5/30) DATA - pcond = 5 kPa -X=0.70 • PCI = 40,000 kJ/kg •...

I'm in need of a heat transfer design that embodies a modern aesthetic for personal use. The design will be applied to a variety of items including T-shirts, Mugs, Tote bags, Hats, and stickers for vehicles. Key Requirements: - Expertise in modern design principles - Experience with heat transfer design - Ability to create versatile designs for different items Ideal Skills: - Graphic Design - Heat Transfer Design - Modern Design Interpretation

...system, aimed for operational testing. Key functionalities: - The prototype should be capable of measuring gas conversion efficiency. - It needs to include a controlled tank system that mixes gas with a specific composition. - The system should convert the gas into liquid and transfer it to a second chamber. - In the second chamber, the liquid will either exit through a valve or be evaporated by heat or vacuum. Key parameters to monitor: - Temperature - Pressure - Flow rate Ideal skills: - Mechanical or chemical engineering - Prototyping and operational testing experience - Knowledge of gas-to-liquid conversion processes - Proficient in developing safety monitoring systems - Able to implement automated control processes. This project is perfect for someone with a strong e...

I'm looking for a Power BI expert to create heat maps to visualize customer demographics, specifically their geographic locations at the city level. Key Requirements: - Expertise in Power BI - Experience in creating heat maps - Ability to visualize and interpret demographic data at a city level - Strong understanding of data visualization principles

...exceed 6 tablets in 24 hours.”). Guidance: Highlight the importance of following the doctor’s instructions or the prescription label for best results. 6. Safety and Precautions Highlight Safety: Outline any critical safety information such as potential side effects, contraindications, and storage instructions (e.g., “Keep out of reach of children. Store at room temperature away from moisture and heat.”). Precautions: Indicate any groups that should avoid the medication (e.g., pregnant women, people with certain allergies) and suggest consulting a healthcare provider if unsure. 7. Frequently Asked Questions (FAQs) Purpose: Include 3-5 FAQs that address common questions about the medication’s use, safety, and effectiveness. Structure: Question: Pose a ...

I'm looking fo...Ekahau based on our floor plan and existing APOS survey. The main goal of this project is to strategically plan access point placement across two floors based on the PDF floor plan I'll provide. Key Responsibilities: - Analyze the provided floor plan and existing APOS survey data. - Identify optimal access point placements to ensure comprehensive coverage. - Generate a secondary signal strength Wifi heat map. Ideal Skills: - Extensive experience with Ekahau software. - Proficiency in interpreting PDF floor plans. - Good understanding of Wifi signal propagation and access point placement strategies. Please note that the objective of this project is not merely to identify dead zones or optimize signal strength, but to facilitate effective planning of acce...

I'm looking for a modern, minimalist 2-Page Elementor Pro on Wordpress Website . 1st page is home page is landing page style (no header& footer) with sections such as: -converting form design -intro (video from youtube) -services sections(6 services) Split Installation 2.Heat Pump Installation Unit Installation Installation Ducts Installation Ventilation & Insulation -brands banner section -about us section(why choose us, our commitment) -services areas section -testimonials section(GMB widget) -Q&A section with 6 questions&answers -ending with the GMB map embed alongside a submission form. *features needed: -all along the landing page a get a free estimate button which opens a designed popup with call button and form to fill. -floating call us now

I am in need of a professional with substantial experience in PCB design and optimization to revi...The primary goal of this project is to improve the overall functionality of the PCB. Key Focus Areas: - Enhancing Power Management: The current design is facing heat-related issues which impacts its performance. Therefore, I need an expert who can help optimize power management to mitigate these problems. - comunication will be another keypoint - extra module for SIM comunication will be included into the improvement and review Ideal Skills and Experience: - Extensive experience in PCB design and modification - Proficiency with Arduino, BLE, and ESP32 - Strong knowledge in power management techniques - Prior experience in heat dissipation solutions design - Excellent proble...

...should allow me to track key metrics every week on MS PowerPoint. Dashboard Overview 1. Financial Overview Assets & Liabilities: Show total assets, liabilities, net worth, and asset-to-liability ratio, with trend analysis via line charts. Budget & Performance: Compare budget vs. actual expenses, with budget utilization rates and future expenditure forecasts. Visuals include bar charts and heat maps. Revenue: Weekly revenue, breakdown by streams, and growth comparisons (week-over-week, YTD). Use line graphs and pie charts. Expenses: Weekly expenses, category breakdowns, and expense-to-revenue ratio. Visuals: stacked bar charts and donut charts. Charges: Track outstanding/paid charges, aging analysis, and due vs. paid comparisons through tables and bar chart...

I'm looking for an expert in ANSYS Fluent to simulate the flow of two heat transfer fluids (water and thermal oil, specifically VP-1) within a Linear Fresnel reflector. The project involves a detailed comparison of the flow characteristics and thermal profiles of both fluids. Key Comparison Parameters: - The outlet temperature - The pressure drop within the absorber tube - The length at which the two-phase flow begins - Contour pictures - Visualization of flow movement - An explanation of the work, recorded as a video Deliverables from the Simulation: - Outlet temperature - Pressure drop within the absorber tube - Length at which two-phase flow starts - All aforementioned items (1 to 6) The ideal candidate should have a strong background in thermal engineering and fluid dyna...

We are making a cabinet for perfumes with cooling, humidity control and low heat LED lights that you can change lights on maybe also a logo with lights under it. We are in need of an electrical automation engineer or someone that has the knowledge of such components to help us determine which ones will be the best for this project and how to incorporate them.

Wireless design + heat map with explanation of design.

...professional who can develop a MATLAB Simulinl/Simscape model for a prototype of an Isolated DC-AC inverter. The model should also include an Isolated LLC resonant DC-DC Converter coupled with a diode bridge rectifier and a Full bridge DC-AC inverter. A vital aspect of this project will be incorporating a heat sink into the model. Key Requirements: - The model should be of an intermediate level with some optimizations. - A key focus will be on thermal management, so previous experience with heat sink integration and thermal dynamics modelling in MATLAB is crucial. - While the model doesn't need to be highly detailed, it should still be comprehensive enough for testing prototype viability. Requirement - Urgent in 1 day Technical details - 400V DC input, 110V AC o...

...temperature between 60-70°F (14-21°C). Incorporate aesthetic elements such as wood, leather, or metal accents for a high-end, stylish look. Design push-to-open doors with a magnetic, soft-close mechanism for quiet, air-tight closure. Create a secure locking mechanism for high-end or collectible perfumes. Materials & Construction: Use UV-protective or tinted glass to block harmful rays, with low heat LED lighting to illuminate the interior. Incorporate materials like velvet or other soft textures for a luxurious internal feel. Design shelving with flexible sizing for 50ml, 100ml, and 150ml bottles and pull-out drawer options for ease of use. Ensure the cabinet is compact enough to fit in a bathroom cupboard or drawer while maintaining sufficient storage space. But also...

I'm looking for a modern, striking logo for my boiler company. The logo should predominantly feature the colors orange, yellow, and black. Key Requirements: - The logo must incorporate heat or flame symbols, as a representation of the industry we operate in. - A minimalist yet modern design style is essential. - The use of abstract shapes, while not necessary, could be an interesting addition if it fits within the overall design. Ideal Skills & Experience: - Proven experience in logo design, particularly in the industrial sector. - A strong portfolio demonstrating modern and minimalist design capabilities. - Excellent understanding of color theory and ability to create visually striking designs.

Key Tasks: -> I'm looking for an innovative Mechanical Engineer to Reactor Design Recommendation for 3D-Printing of a Heat Exchanger Reactor. -> Create a hand sketch or rough CAD model of the reactor. -> For methanol synthesis in a pilot plant, a reactor with 50 reaction channels will be used. The reaction operates at 40-60 bar and 200-300°C and is exothermic, requiring continuous active cooling within the reactor. The reaction channels must contain catalyst particles or pellets. The reaction medium and the cooling medium should not mix, each having separate inlets and outlets. Ideal Skills: - Expertise in reactor design and thermodynamics. - Proficient in CAD software and 3D-printing techniques. - Experience in designing for cost-effective producti...

...of the project’s scope. Safety Systems: The flamethrower must include fail-safes, such as pressure control, ignition safety, and an immediate cut-off system to ensure the device is safe for the user. Components: The project will require a combination of compressed air or CO2 systems to project the flame at a distance and an electric ignition system to initiate the flame, all enclosed in a sturdy, heat-resistant housing. We are looking for: Mechanical Engineers experienced in combustion systems or energy wave generation. Electrical Engineers for the integration of control systems and energy emission technologies. Industrial Designers with the skills to create ergonomic and aesthetically appealing devices. Safety Experts to ensure the devices are built with high safety stand...

...well as harmful UV radiation from the sun. We are currently looking to launch a new branded product and need the assistance of an experienced designer to create a concept design and technical documentation suitable for factory production. Below are the key requirements for the project: Project Requirements: 1. Color Scheme: The overall color palette should be light to reflect sunlight and minimize heat absorption. We aim to avoid vibrant or flashy colors that could attract insects. The design should focus on subtle, soft tones that are practical for summer. 2. Pattern Design: We are looking for a design that is clean, simple, and elegant. The style should be minimalist yet convey a sense of premium quality. Please avoid overly decorative or complex patterns. 3. Tailoring and Fit...

I'm in need of a talented sourcing agent based in India who can assist me in identifying and connecting with manufacturers capable of producing a custom-designed art and craft activity. The specific materials for this project include heat transfer foil and EVA Foam sheet and googly eyes Key Responsibilities: - Identify manufacturers who can produce the required materials - Negotiate terms that are favorable and fair - Coordinate logistics and shipping to ensure timely delivery - Implement quality control measures to maintain high standards The ideal candidate should have: - Proven experience in sourcing and negotiating - Excellent communication and coordination skills - Ability to implement quality control - Knowledge of the art and craft manufacturing industry would be a p...

I'm looking for an HVAC engineer for building permit submission; mixed use, 2,240 sq. ft. (40' x 56') in Espanola, ON. Job involves what is required for permit? Simple hydronic tubing design (four 500' x .75" loops) in monolithic slab on grade, gas boiler sizing, heat loss/gain, and ventilation.

...of the jacket. Specifically, the elements will involve: - A round logo that includes our team name, the 8-ball and the two pistols (or some variation of them) to be placed on the front left chest area of the jacket. - A horizontal implementation of the team name on the top back portion of the jacket (covered by the hood in the image). It is important to note that these will be done using vinyl heat press with a single colour on black jackets, so there should be no shading or colours, this will need to be a two-colour implementation, with one of the colours being black (the cutout areas of the vinyl). Here's a few things to note about the team: - Name: Pistolero - Sport: Pool (billiards) - We have used a couple of pistols (six shooter guns) and an 8-ball in the past and al...

I'm seeking an expert with Matla...for simulating a welding process of Hot roll bonding in Aluminium. The goal of the simulation is to validate experimental results from a research paper I'll provide. Key Requirements: - Perform a comprehensive simulation covering heat distribution, material deformation, and bond strength - Generate outputs including temperature profiles, stress-strain curves, and bonding efficiency - Compare simulation results with experimental data for validation Ideal Skills: - Proficient in Matlab with prior experience in welding process simulation - Understanding of heat distribution, material deformation, and bond strength - Ability to analyze and interpret complex data Please note, the aspect of the welding process to focus on will be det...

I'm looking for an expert in HVAC design to create an efficient air flow system...expert in HVAC design to create an efficient air flow system for my home. The primary heating source is a pellet stove. The main goal of this airflow design is to improve comfort throughout the house, with a specific focus on the bedrooms, which require the most attention. Pellet stove 63,000 btu is main floor in dining/breakfast area, 3 bed rooms (each 150 square feet) are upstairs. Need to better heat them using the pellet stove. Also have straight stairway going from main floor to upstairs Ideal skills and experience for the job include: - Expertise in HVAC design - Experience with pellet stove heating systems - Ability to design for comfort optimization - Prior work focused on residential he...

...see suggestions "Freeze Your Stress. Melt Your Worries." "Freeze Your Limits. Heat Up Your Potential." "Conquer Cold, Master Heat, Thrive Daily." "Why Live at Room Temperature?" "Refresh Your Body, Ignite Your Soul" "Feel the Freeze. Embrace the Heat. Elevate Your Life." "Ready to Plunge? Cool Off, Heat Up, Feel Better." "Unlock the Power of Ice & Fire." "Escape the Ordinary" Can’t Handle the Heat? Try the Cold. Can’t Handle the Cold? Try the Heat!” "Unlock Elite Health. Minimize Stress, Maximize Life." Success Requires Recovery. "Stay Ahead of the Game. Restore, Revive, Recharge." Call to action for website examp...

...skilled developer to integrate my existing Tuya libraries with an ESP32-C6-DevKitC-1-N8. The primary focus is device control for a Mitsubishi heat pump via UART communication and the CN105 port connector. PCB development for production is also part of this project. Key tasks: - Embed Tuya libraries into the ESP32-C6-DevKitC-1-N8 - Establish UART communication with the Mitsubishi heat pump and transmit data over Zigbee to Tuya Gateway - Develop a PCB for production Ideal skills and experience: - Proficient in IoT, particularly with Tuya and ESP32 - Experienced in UART communication - PCB design and development skills - Previous work with Mitsubishi heat pumps is a plus Usefule Links :

I need a detailed design for an AC unit using a micro channel heat exchanger capable of cooling air from 45 degrees Celsius to 23 degrees Celsius. The design should be created in SolidWorks, and it should include comprehensive thermal and fluid dynamics analyses and simulations. The 3D model should be highly detailed with all components included. Ideal Skills: - Proficient in SolidWorks - Experienced in designing HVAC systems - Knowledgeable in micro channel heat exchange technology - Skilled in conducting thermal and fluid dynamics simulations - Capable of creating detailed 3D models Please note, there are no specific standards or regulations that the design needs to comply with.

...Requirements: Expertise in mechanical engineering and product design. Experience with kitchen tools or small appliance development. Ability to design and prototype mechanical systems (e.g., spring-wind or pendulum mechanisms). Knowledge of heat-resistant materials suitable for cooking environments. Here’s what I need assistance with: Mechanical Design: Develop the internal mechanism (e.g., spring-wind or pendulum) that powers the spoon’s rotation. This should be designed to withstand kitchen conditions (heat, moisture). Material Selection: Advise on heat-resistant and durable materials for the mechanical parts. Prototyping: Create a 3D model and technical drawings for the design. If possible, assist with the prototyping phase to test the mechanism. The c...

...of the project’s scope. Safety Systems: The flamethrower must include fail-safes, such as pressure control, ignition safety, and an immediate cut-off system to ensure the device is safe for the user. Components: The project will require a combination of compressed air or CO2 systems to project the flame at a distance and an electric ignition system to initiate the flame, all enclosed in a sturdy, heat-resistant housing. Secondary Project: Energy Wave Device Design: A secondary project involves developing a non-lethal energy wave device that uses sound waves or other forms of energy to incapacitate a target temporarily. The design will also be sleek and handheld. Technology: The device should emit sound waves, electromagnetic pulses, or other forms of energy that cause disor...

I'm looking for a professional to design a cooling heat load for a 20,000 square foot plaza divided into three main sections: a senior care area, an office space, and a yoga spot. The cooling system will be a centralized one, and the primary goal of this project is to ensure the system is cost-effective. Key Responsibilities: - Analyze the cooling needs of the different sections of the plaza - Design a centralized cooling system that is cost-effective - Provide detailed plans and specifications Ideal Skills and Experience: - Extensive knowledge in HVAC design - Experience with centralized cooling systems - Understanding of cooling requirements for diverse spaces - Ability to create cost-effective designs Please submit your proposal if you have the relevant experience and can...