tests/snapshot.rc

#!/bin/bash

LVM_DEFINED=0
# Replace any '-' by '_' to avoid that device manager modifies the name of
# the device (it replaces '-' by '--' in /dev/mapper)
LVM_PREFIX="patchy_snap_${GFREG_ID//-/_}"
LVM_COUNT=0
VHD_SIZE="300M"

#This function will init B# bricks
#This is used when launch_cluster is
#not called to init B#. Call it before
#setup_lvm
function init_n_bricks() {
    local count=$1
    for i in `seq 1 $count`; do
        eval "B$i=/d/backends/$i"
    done
}

count_snaps () {
    ls $1/.snaps | wc -l
}

function init_lvm() {
    if [ "$1" == "" ]; then
        echo "Error: Invalid argument supplied"
        return 1
    fi
    LVM_COUNT=$1

    if [ "$2" != "" ]; then
        VHD_SIZE=$2
    fi

    local b
    local i

    if [ "$B1" = "" ]; then
        B1=$B0
    fi

    for i in `seq 1 $LVM_COUNT`; do
        b="B$i"
        if [ "${!b}" = "" ]; then
            echo "Error: $b not defined."
            echo "Please run launch_cluster with atleast $LVM_COUNT nodes"
            return 1
        fi

        eval "L$i=${!b}/${LVM_PREFIX}_mnt"
        l="L$i"
        mkdir -p ${!l}
        if [ $? -ne 0 ]; then
            echo "Error: failed to create dir ${!l}"
            return 1
        fi

        eval "VG$i=${LVM_PREFIX}_vg_${i}"
    done

    LVM_DEFINED=1
    return 0
}

function verify_lvm_version() {
    if `/sbin/lvcreate --help | grep -q thin`; then
        return 0;
    fi
    return 1;
}

function setup_lvm() {
    init_lvm $@ || return 1
    _setup_lvm
    return 0
}

function cleanup_lvm() {
    pkill gluster
    sleep 2

    _cleanup_lvm_again
    return 0
}

# Find out how this file was sourced, source traps.rc the same way, and use
# push_trapfunc to make sure cleanup_lvm gets called before we exit.
. $(dirname ${BASH_SOURCE[0]})/traps.rc
push_trapfunc cleanup_lvm

########################################################
# Private Functions
########################################################
function _setup_lvm() {
    local count=$LVM_COUNT
    local b
    local i

    for i in `seq 1 $count`; do
        b="B$i"

        _create_vhd ${!b} $i
        _create_lv ${!b} $i
        _mount_lv $i
    done
}

function _cleanup_lvm_again() {
    local file

    findmnt -nRlT "${B0}" -o TARGET,SOURCE | grep "${LVM_PREFIX}" | awk '{print $2}' | xargs -r ${UMOUNT_F}
    findmnt -nRlo TARGET,SOURCE | grep "run/gluster/snaps" | awk '{print $2}' | xargs -r ${UMOUNT_F}
    \rm -rf /var/run/gluster/snaps/*

    vgremove -fyS "vg_name=~^${LVM_PREFIX}_vg"

    for dev in $(ls ${DEVDIR}/loop* 2>/dev/null); do
        losetup -d "${dev}"
        rm -f "${dev}"
    done

    find $B0 -name "${LVM_PREFIX}*" | xargs -r rm -rf
}

########################################################
########################################################
function _create_vhd() {
    local dir=$1

    fallocate -l${VHD_SIZE} $dir/${LVM_PREFIX}_vhd
    dev="$(losetup -f --show "${dir}/${LVM_PREFIX}_vhd")"
    ln -sf "${dev}" "${DEVDIR}/$(basename "${dev}")"
    ln -sf "${DEVDIR}/$(basename "${dev}")" "${dir}/${LVM_PREFIX}_loop"
}

function _create_lv() {
    local dir=$1
    local num=$2
    local vg="VG$num"
    local thinpoolsize="200M"
    local virtualsize="150M"
    local path="$(realpath "${dir}/${LVM_PREFIX}_loop")"

    wipefs -a "${path}"
    /sbin/pvcreate --zero n "${path}"
    /sbin/vgcreate --zero n ${!vg} "${path}"

    /sbin/lvcreate --zero n -L ${thinpoolsize} -T ${!vg}/thinpool
    /sbin/lvcreate -V ${virtualsize} -T ${!vg}/thinpool -n brick_lvm

    mkfs.xfs -K -f /dev/${!vg}/brick_lvm
}

function _mount_lv() {
    local num=$1
    local vg="VG$num"
    local l="L$num"

    mount -t xfs -o nouuid /dev/${!vg}/brick_lvm ${!l}
}

function _umount_lv() {
    local num=$1
    local l="L$num"

    ${UMOUNT_F} ${!l} 2>/dev/null || true
    rmdir ${!l} 2>/dev/null || true
}

function _remove_lv() {
    local num=$1
    local vg="VG$num"

    vgremove -fy ${!vg}
}

function _remove_vhd() {
    local dir=$1

    losetup -d $dir/${LVM_PREFIX}_loop
    rm -f "$(readlink "${dir}/${LVM_PREFIX}_loop")"
    rm -f $dir/${LVM_PREFIX}_loop
    rm -f $dir/${LVM_PREFIX}_vhd
}

########################################################
# Utility Functions
########################################################
function snapshot_exists() {
        local clitype=$1
        local snapname=$2
        local cli=$CLI
        if [ "$clitype" == "1" ]; then
                cli=$CLI_1;
        fi
        if [ "$clitype" == "2" ]; then
                cli=$CLI_2;
        fi
        $cli snapshot list | egrep -q "^$snapname\$"
        return $?
}

#Create N number of snaps in a given volume
#Arg1 : <Volume Name>
#Arg2 : <Count of snaps to be created>
#Arg3 : <Snap Name Pattern>
#Return: Returns 0 if all snaps are created ,
#        if not will return exit code of last failed
#        snap create command.
function create_n_snapshots() {
        local cli=$1
        local vol=$1
        local snap_count=$2
        local snap_name=$3
        local ret=0
        for i in `seq 1 $snap_count`; do
                $CLI_1 snapshot create $snap_name$i ${vol} no-timestamp &
                PID_1=$!
                wait $PID_1
                ret=$?
                if [ "$ret" != "0" ]; then
                        break
                fi
         done
         return $ret
}


#Delete N number of snaps in a given volume
#Arg1 : <Volume Name>
#Arg2 : <Count of snaps to be deleted>
#Arg3 : <Snap Name Pattern>
#Return: Returns 0 if all snaps are Delete,
#        if not will return exit code of last failed
#        snap delete command.
function delete_n_snapshots() {
        local vol=$1
        local snap_count=$2
        local snap_name=$3
        local ret=0
        for i in `seq 1 $snap_count`; do
                $CLI_1 snapshot delete $snap_name$i &
                PID_1=$!
                wait $PID_1
                temp=$?
                if [ "$temp" != "0" ]; then
                        ret=$temp
                fi
         done
         return $ret
}

#Check for the existance of N number of snaps in a given volume
#Arg1 : <Volume Name>
#Arg2 : <Count of snaps to be checked>
#Arg3 : <Snap Name Pattern>
#Return: Returns 0 if all snaps exists,
#        if not will return exit code of last failed
#        snapshot_exists().
function snapshot_n_exists() {
        local vol=$1
        local snap_count=$2
        local snap_name=$3
        local ret=0
        for i in `seq 1 $snap_count`; do
                snapshot_exists 1 $snap_name$i
                ret=$?
                if [ "$ret" != "0" ]; then
                        break
                fi
         done
         return $ret
}

#Check for the status of snapshot for a volume
#Arg1 : <Snap Name>
function snapshot_status()
{
    local snap=$1;
    local cli=$CLI_1;
    if [ "$cli" = "" ]; then
        cli=$CLI
    fi

    #TODO: Right now just fetches the status of the single snap volume.
    #When snapshot will have multiple snap volumes, should have a
    #cummulative logic for status
    $cli snapshot info $snap | grep "Status" | sed 's/.*: //';
}


#Check the different status of a particular snapshot
#Arg1 : <Snap name>
#Arg2 : <Filed in status>
#Arg3 : <Expected value>
function snapshot_snap_status()
{

    local snap=$1;
    local cli=$CLI_1;
    local field=$2;
    local expected=$3;
    if [ "$cli" = "" ]; then
        cli=$CLI
    fi
    for i in $($cli snapshot status $snap | grep "$field" | \
               cut -d ':' -f2 | awk '{print $1}') ;
    do
           if [ "$i" != "$expected" ]; then
                echo "Failed"
                return 1;
           fi;
    done;
echo "Success"
return 0;
}

# arg-1 : From which node the command should be trigerred
#         Ex : $CLI_1, $CLI_2, etc.
# arg-2 : Volume name
# arg-3 : Starting index for the snapname "snap$i"
# arg-4 : Number of snapshots to be taken
function snap_create()
{
        eval local cli_index=\$$1
        local volname=$2
        local i=$3
        local limit=$[$i + $4]

        while [ $i -lt $limit ]
        do
                $cli_index snapshot create snap$i $volname no-timestamp
                i=$[$i+1]
        done
}

# arg-1 : From which node the command should be trigerred
#         Ex : $CLI_1. $CLI_2, etc.
# arg-2 : Volume name.
function get_snap_count()
{
        eval local cli_index=\$$1
        local volname=$2


        if [ -z "$2" ]
        then
                $cli_index snapshot list | grep -v "No snapshots present"\
                                         | wc -l
        else
                $cli_index snapshot list $volname\
                                         | grep -v "No snapshots present"\
                                         | wc -l
        fi
}

# arg-1 : From which node the command should be trigerred
#         Ex : $CLI_1, $CLI_2, etc.
# arg-2 : Starting index for the snapname "snap$i"
# arg-3 : Number of snapshots to be deleted.
function snap_delete()
{
        eval local cli_index=\$$1
        local i=$2
        local limit=$[$i + $3]

        while [ $i -lt $limit ]
        do
                $cli_index snapshot delete snap$i
                i=$[$i+1]
        done
}

# arg-1 : From which node the command should be triggered
#         Ex : $CLI_1, $CLI_2, etc.
# arg-2 : key value
function snap_config()
{
        eval local cli_index=\$$1
        local var=$2
        $cli_index snapshot config | grep "^$var" | sed 's/.*: //'
}

function check_if_snapd_exist() {
        local pid
        pid=$(ps aux | grep "snapd" | grep -v grep | awk '{print $2}')
        if [ -n "$pid" ]; then echo "Y"; else echo "N"; fi
}

# returns number of snapshot being displayed in ".snaps" directory
function uss_count_snap_displayed() {
        local path=$1
        ls $path/.snaps | wc -l
}

function snap_info_volume()
{
        eval local cli_index=\$$1
        local var=$2
        local vol=$3
        $cli_index snapshot info volume $vol | grep "^$var" | sed 's/.*: //'
}

function snap_config_volume()
{
        eval local cli_index=\$$1
        local var=$2
        local vol=$3
        $cli_index snapshot config $vol| grep "^$var" | sed 's/.*: //'
}

#return specific fields of xml output
function get-cmd-field-xml()
{
        local cli=$CLI_1;
        if [ "$cli" = "" ]; then
            cli=$CLI
        fi

        COMMAND=$1
        PATTERN=$2

        $cli $COMMAND --xml | xmllint --format - | grep $PATTERN
}

function get_snap_brick_status()
{
    local snap=$1;

    $CLI snapshot status $snap | grep "Brick Running" | sed 's/.*: //';
}

case $OSTYPE in
NetBSD)
        echo "Skip test on LVM which is not available on NetBSD" >&2
        SKIP_TESTS
        exit 0
        ;;
*)
        ;;
esac