Skip to content

Home

Jump to bottom
Awawa edited this page Aug 22, 2023 · 10 revisions

How to compile project using Github Action and change the pinout or enable multi-segments for your board.

To use latest version of HyperSerialPico, you need latest HyperHDR v20 or newer and to use Github Action to build a custom firmware follow the steps in the order.

If you do not follow the correct order given in the manual, the Github Action may not trigger after saving changes to the configuration file. Then you need to re-save/commit some new changes to trigger the build process if the Github action was finally enabled.

  1. Fork the project. You will commit all changes to your forked repository.

obraz

  1. Enable Github Action for your fork

obraz

  1. Make your changes to CMakeLists.txt file

obraz

  1. Turn on the online editor and change the settings you need

obraz

  1. When you're ready, save/commit your changes

obraz

  1. The firmware build should start immediately. After few minutes download your firmware

obraz

205495660-214ca594-e1a4-4cbf-89d0-a5784a04c94c

Clone this wiki locally