jitsi-meet Secure, Simple and Scalable Video Conferences that you use as a standalone app or embed in your web application.

helm repo add jitsi https://jitsi-contrib.github.io/jitsi-helm/
helm install myjitsi jitsi/jitsi-meet

This chart bootstraps a jitsi-meet deployment, like the official one.

To be able to do video conferencing with other people, the JVB component should be reachable by all participants (e.g. on a public IP). Thus the default behaviour of advertised the internal IP of JVB, is not really suitable in many cases. Kubernetes offers multiple possibilities to work around the problem. Not all options are available depending on the Kubernetes cluster setup. The chart tries to make all options available without enforcing one.

This requires a cloud setup that enables a Loadbalancer attachement. This could be enabled via values:

jvb:
  service:
    type: LoadBalancer

  # Depending on the cloud, LB's public IP cannot be known in advance, so deploy first, without the next option.
  # Next: redeploy with the following option set to the public IP you retrieved from the API.
  # Additionally, you can add your cluster's public IPs if you want to use direct connection as a fallback.
  publicIPs:
    - 1.2.3.4
    # - 30.10.10.1
    # - 30.10.10.2

In this case you're not allowed to change the jvb.replicaCount to more than 1, UDP packets will be routed to random jvb, which would not allow for a working video setup.

jvb:
  service:
    type: NodePort
  # Set the following variable if you want to use a specific external port for the service.
  # The default is to select a random port from Kubelet's allowed NodePort range (30000-32767).

  # nodePort: 10000

  # Use public IP of one (or more) of your nodes,
  # or the public IP of an external LB:
  publicIPs:
    - 30.10.10.1

In this case you're not allowed to change the jvb.replicaCount to more than 1, UDP packets will be routed to random jvb, which would not allow for a working video setup.

jvb:
  useHostPort: true
  # Use public IP of one (or more) of your nodes,
  # or the public IP of an external LB:
  publicIPs:
    - 30.10.10.1

In this case you can have more the one jvb but you're putting you cluster at risk by having the nodes IPs and JVB ports directly exposed on the Internet.

jvb:
  useHostPort: true
  useNodeIP: true

This is similar to option 3, but every JVB pod will auto-detect it's own external IP address based on the node it's running on. This option might be better suited for installations that use OCTO.

jvb:
  useHostNetwork: true

Similar to Option 3, this way you expose JVB "as is" on the node, without any additional protection. This is not recommended, but might be useful in some rare cases.

In case of an ingress capable of doing tcp/udp forwarding (like nginx-ingress), it can be setup to forward the video streams.

# Don't forget to configure the ingress properly (separate configuration)
jvb:
  # 1.2.3.4 being one of the IP of the ingress controller
  publicIPs:
    - 1.2.3.4

Again in this case, only one jvb will work in this case.

There are multiple other possibilities combining the available parameters, depending of your cluster/network setup.

This chart includes support for Jibri, which allows Jitsi Meet users to record and stream their meetings. To enable Jibri support, add this section to your values.yaml:

jibri:
  ## Enabling Jibri will allow users to record
  ## and/or stream their meetings (e.g. to YouTube).
  enabled: true

  ## Enable single-use mode for Jibri (recommended).
  singleUseMode: false

  ## Enable multiple Jibri instances.
  ## Secommended for single-use mode.
  replicaCount: 1

  ## Enable recording service.
  ## Set this to true/false to enable/disable local recordings.
  ## Defaults to enabled (allow local recordings).
  recording: true

  ## Enable livestreaming service.
  ## Set this to true/false to enable/disable live streams.
  ## Defaults to disabled (livestreaming is forbidden).
  livestreaming: true

  ## Enable persistent storage for local recordings.
  ## If disabled, jibri pod will use a transient
  ## emptyDir-backed storage instead.
  persistence:
    enabled: true
    size: 32Gi

  shm:
    ## Set to true to enable "/dev/shm" mount.
    ## May be required by built-in Chromium.
    enabled: true

The above example will allow your Jitsi users to make local recordings, as well as live streams of their meetings.

The following table lists the configurable parameters of the jisti-meet chart and their default values.

helm package . -d docs
helm repo index docs --url https://jitsi-contrib.github.io/jitsi-helm/