This is a TCP wrapper which will filter server connection attempts based on the AS Number that the IP is assigned to. It can be configured in one of two different ways:

1. Allow connections only from a specified list of AS Numbers.
2. Deny connections EXCEPT those from a specified list of AS Numbers.

This allows for the dynamic blocking (or allowing) of all IPs belonging to an AS Number without having to manage or maintain IP lists, which can often be very large.

An Autonomous System (AS) is a group of one or more IP prefixes (lists of IP addresses accessible on a network) run by one or more network operators that maintain a single, clearly-defined routing policy. ASNs are important because the ASN uniquely identifies each network on the Internet.

There is approximately 100,000 unique AS Numbers in use today.

The use of TCP wrappers does not eliminate the need for a properly configured firewall. This script should be seen as part of your security solution, not the whole of it.

This tool relies on geoiplookup, if it is not installed then the script will log an error and allow the connection, even if the default action is DENY. The reason for this is that without this ALL connections would be blocked including your own (which would be bad).

This may require additional apt or yum sources depending on your distribution.

Debian / Ubuntu

# apt-get install geoip-bin geoip-database geoip-database-extra

CentOS / RHEL

# yum install GeoIP GeoIP-data

By default this will install the free version of the GeoLite Country binary database (GeoIP.dat etc.), usually in the /usr/local/share or /usr/share directory. The specific location doesn't matter as the geoiplookup command will know where to look for the data files.

We currently do not support GeoIP2 format (mmdb) or automated updates from MaxMind, although is this on the roadmap for this tool.

Look up one of Google’s IPs.

# geoiplookup 74.125.225.33
GeoIP Country Edition: US, United States
GeoIP ASNum Edition: AS15169 Google LLC

If you see the above or similar then geoiplookup is installed and working.

Although this was developed for use with sshd, the principle should work for any service that is supported by TCP wrappers, however in this documentation we will use sshd.

Copy the script to /usr/local/sbin/asn-filter (and ensure that it is executable [chmod +x]).

Out of the box the ASNS list is empty and the script has the default ACTION of DENY (only block AS Numbers in the list), so the net effect at this point is to block nothing.

To add AS Numbers to the list, add them to the ASNS variable. This is a space separated list of AS Numbers.

There are times where an AS Number cannot be identified, if you want to block all entries where an AS Number cannot be identified, add XX to the ASNS variable.

By default the script will deny connections from any AS Number listed in the ASNS variable, however you can invert this logic and only allow connections from these AS Numbers, by setting the ACTION variable to ALLOW.

If you change the default ACTION to ALLOW, ensure your own AS Number is in the list of AS Numbers before you do this, otherwise you will no longer be able to connect to your server. This won't effect existing open connections, so test with a new connection attempt to ensure the configuration is correct.

In Linux/Unix based systems the processing order for TCP wrappers is as follows:

1. hosts.allow
2. hosts.deny

This means that anything that is not handled (allowed / denied) by hosts.allow will be handled by hosts.deny.

The following configuration will tell the system to pass all IPs, for ssh connections, to the asn-filter. The return code of the filter specifies the action to be taken.

1. 0 = Success - allow the connection.
2. 1 = Failure - deny the connection.

sshd: ALL: aclexec /usr/local/sbin/asn-filter %a 

aclexec tells the system to execute the following script and %a is replace by the current IP address.

The following configuration will tell the system to deny all ssh connections.

sshd: ALL

This should never be reached because all cases should be handled by the asn filter, but as with all security configurations protection in depth is key and having a safe / secure fallback position is preferable.

We provide a number of different TCP Wrapper filters.

If you wish to use more than one of our TCP Wrappers then please refer to our TCP Wrapper Multiplexer.