AI Pedestrian Protector for School Bus
Non-AI SV12 AHD Cameras
Two Configurations:
AI Pedestrian Protector or Non-AI SV12 AHD Cameras
360° CAMERA SOLUTION
VIDEO PROCESSOR
– SV12 v3 GPS Processor supports Al Pedestrian Protector and non-Al SV12 AHD cameras
– H264 / H.265 Video Compression
– Video stitching to provide 360° images around the vehicle
– Selectable 2D or 3D view
– Easy to use auto-calibration to stitch images together
– Choice of hard corrugated or fabric calibration mat
– USA – National Defense Authorization Act (NDAA) compliant
CAMERA
– Four color 190° wide-angle fisheye cameras
– Analog High-definition 1080p 30FPS
– Two styles of cameras:
-
- Water tight connector for cameras with connectors exposed to elements
- Molex connector for cameras with connectors located internal to vehicle body
DISPLAY OPTIONS FOR SV12 v3 – VIDEO DISPLAY MIRROR OR AHD MONITOR
SUPERIOR HIGH DEFINITION IMAGING
• Monitor displays video when trigger is present – otherwise the driver sees a regular mirror
• Superb Night Vision
• 7” LCD Color Monitor in rear view Mirror
• Simple rear-view mirror Install
• On Screen Menu
• 7-inch or 9-inch 1080P LCD flat panel monitor
• Views full screen, dual-screen, or quad screen
360° SURROUND VISION SYSTEM
The 360° Surround Vision System provides a real-time and surround view of the vehicle for blind-spot detection. The display monitor is off when the vehicle is moving forward. As the vehicle is reversing or turning, the display monitor turns on and provides a split-screen display of a 360° stitched panoramic image and a rear, left, or right view (as appropriate). The 360° Surround Vision System utilizes 1080p cameras, is easy to install and calibrate for specific vehicle requirements.
360° SURROUND VISION SYSTEM DEMONSTRATION
PEDESTRIAN PROTECTOR
Specification | |
Video Processor | |
Video Input | 4 x 1080p Analog High Definition (AHD) channels |
Video Output | 1 channel 1080p, 1 channel D1 |
Camera Field of View | 190 degrees |
Video System | NTSC / PAL |
Trigger Input | Left turn, Right turn, Reverse signal |
Trigger Display |
Left turn – split display of left side view and 360° stitched image Right turn – split display of right side view and 360° stitched image Reverse–split display of rear view and 360° stitched image |
Operating Temperature | -22°F to +155°F (-30°C to +70°C) |
3D/2D Image Rendering | Configurable |
Camera | |
Imaging Sensor | 1/2.9” SONY CMOS |
Video System | NTSC / PAL |
Resolution | 1080p (1920 x 1080) |
Minimum Illumination | 0.1 Lux |
Operating Voltage | 12V (powered from video processor) |
Operating Current | <140mA DC 12V |
Operating Temperature | -22°F to +155°F (-30°C to +70°C) |
IP Rating | IP69K |