Logo de Freelancer
Iniciar sesión Registrarse
Publica un proyecto
EXPLORAR
Circuit Design
Electrical Engineering
Electronics
PCB Layout
Verilog / VHDL
Foto de portada de perfil
Ahora estás siguiendo a
Error al seguir a usuario.
Este usuario no permite que los usuarios lo sigan.
Ya estás siguiendo a este usuario.
Tu plan de membresía solo permite 0 seguimientos. Mejora tu membresía aquí.
Dejaste de seguir correctamente a
Error al dejar de seguir al usuario.
Has recomendado exitosamente a
Error al recomendar al usuario.
Algo salió mal. Por favor, actualiza la página e intenta de nuevo.
Email verificado correctamente.
Avatar del usuario

George Z.

@zarnescugeorge

annual-level-two.svg
5,0
140
7,6
7,6
96%

Electronics PCB Design Engineer

$25 USD / hora
・
Bandera de
Romania (10:53 p. m.)
・
Se unió el julio 3, 2013
$25 USD / hora
・
I am an expert Electronics PCB Design Engineer with 10 years industry experience. I can design and implement analog, digital and high speed circuits, FPGA circuits and write firmware in VHDL and Embedded C. I can design rigid, rigid-flex or flex PCBs, also I can do 3D modelling of electronic components. You can find a lot of interesting projects on my site: [login to view URL]
Verificaciones
A tiempo
66 %
Dentro del presupuesto
66 %
Aceptar tarifa
74 %
Tasa de recontratación
23 %
Freelancer Electrical Engineers Romania
Ver todo Electrical Engineers en Romania

Portafolio

Portafolio

4871415
In this project an electronics shelf label base board was designed and implemented. The circuit consists of a microprocessor SOC chip from Nordic Semiconductors, nRF52832, that has BTLE5.0 (Bluetooth) capability. Also there can be found an ePaper LCD display interface from Good Display, IL0373, an NXP NFC Reader interface, PN7150, an RGB led interface, a Secure IC interface from Microchip, an ISP TAG programming connector and a power interface with an SMPS chip from Texas Instruments, TPS62152RGTR. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings, the 3D view of the board and the enclosure with the board fitted.
Electronic Shelf Label Base Board
In this project an electronics shelf label base board was designed and implemented. The circuit consists of a microprocessor SOC chip from Nordic Semiconductors, nRF52832, that has BTLE5.0 (Bluetooth) capability. Also there can be found an ePaper LCD display interface from Good Display, IL0373, an NXP NFC Reader interface, PN7150, an RGB led interface, a Secure IC interface from Microchip, an ISP TAG programming connector and a power interface with an SMPS chip from Texas Instruments, TPS62152RGTR. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings, the 3D view of the board and the enclosure with the board fitted.
Electronic Shelf Label Base Board
In this project an electronics shelf label base board was designed and implemented. The circuit consists of a microprocessor SOC chip from Nordic Semiconductors, nRF52832, that has BTLE5.0 (Bluetooth) capability. Also there can be found an ePaper LCD display interface from Good Display, IL0373, an NXP NFC Reader interface, PN7150, an RGB led interface, a Secure IC interface from Microchip, an ISP TAG programming connector and a power interface with an SMPS chip from Texas Instruments, TPS62152RGTR. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings, the 3D view of the board and the enclosure with the board fitted.
Electronic Shelf Label Base Board
4871411
In this project an electronics shelf label sensor board was designed and implemented. The circuit consists of a microcontroller for time-of-flight applications from Intersil, ISL29501IRZ-T7A, a SMD Infrared led and a SMD photodiode. This sensor mates with the ESL base board presented in a section below. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings, the 3D view of the board and the enclosure with the board fitted.
Electronic Shelf Label Sensor Board (Intersil Sensor)
In this project an electronics shelf label sensor board was designed and implemented. The circuit consists of a microcontroller for time-of-flight applications from Intersil, ISL29501IRZ-T7A, a SMD Infrared led and a SMD photodiode. This sensor mates with the ESL base board presented in a section below. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings, the 3D view of the board and the enclosure with the board fitted.
Electronic Shelf Label Sensor Board (Intersil Sensor)
In this project an electronics shelf label sensor board was designed and implemented. The circuit consists of a microcontroller for time-of-flight applications from Intersil, ISL29501IRZ-T7A, a SMD Infrared led and a SMD photodiode. This sensor mates with the ESL base board presented in a section below. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings, the 3D view of the board and the enclosure with the board fitted.
Electronic Shelf Label Sensor Board (Intersil Sensor)
4871407
This is the light version of the ESL Base Board presented below. The circuit consists of a microprocessor SOC chip from Nordic Semiconductors, NRF52810, that has BTLE5.0 (Bluetooth) capability. Also there can be found a Crypto-Authentification IC, ATECC508A, from Microchip, a NFC TAG dynamic module, DTM0806, form SAG, two RGB led interfaces and a time-of-flight sensor interface mating connector. The circuit is able to be powered from a stable power source of 12 V or can be battery powered. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings and the 3D view of the board.
Electronic Shelf Label Base Board Mini
This is the light version of the ESL Base Board presented below. The circuit consists of a microprocessor SOC chip from Nordic Semiconductors, NRF52810, that has BTLE5.0 (Bluetooth) capability. Also there can be found a Crypto-Authentification IC, ATECC508A, from Microchip, a NFC TAG dynamic module, DTM0806, form SAG, two RGB led interfaces and a time-of-flight sensor interface mating connector. The circuit is able to be powered from a stable power source of 12 V or can be battery powered. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings and the 3D view of the board.
Electronic Shelf Label Base Board Mini
This is the light version of the ESL Base Board presented below. The circuit consists of a microprocessor SOC chip from Nordic Semiconductors, NRF52810, that has BTLE5.0 (Bluetooth) capability. Also there can be found a Crypto-Authentification IC, ATECC508A, from Microchip, a NFC TAG dynamic module, DTM0806, form SAG, two RGB led interfaces and a time-of-flight sensor interface mating connector. The circuit is able to be powered from a stable power source of 12 V or can be battery powered. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings and the 3D view of the board.
Electronic Shelf Label Base Board Mini
4871404
This is the flex version of the light version of the ESL Base Board presented below. The circuit consists of a microprocessor SOC chip from Nordic Semiconductors, NRF52810, that has BTLE5.0 (Bluetooth) capability. Also there can be found a Crypto-Authentification IC, ATECC508A, from Microchip, a NFC TAG dynamic module, DTM0806, form SAG, two RGB led interfaces and a time-of-flight sensor interface mating connector. The circuit is able to be powered from a stable power source of 12 V or can be battery powered. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings and the 3D view of the board.
Electronic Shelf Label Base Board Mini (Flex Version)
This is the flex version of the light version of the ESL Base Board presented below. The circuit consists of a microprocessor SOC chip from Nordic Semiconductors, NRF52810, that has BTLE5.0 (Bluetooth) capability. Also there can be found a Crypto-Authentification IC, ATECC508A, from Microchip, a NFC TAG dynamic module, DTM0806, form SAG, two RGB led interfaces and a time-of-flight sensor interface mating connector. The circuit is able to be powered from a stable power source of 12 V or can be battery powered. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings and the 3D view of the board.
Electronic Shelf Label Base Board Mini (Flex Version)
This is the flex version of the light version of the ESL Base Board presented below. The circuit consists of a microprocessor SOC chip from Nordic Semiconductors, NRF52810, that has BTLE5.0 (Bluetooth) capability. Also there can be found a Crypto-Authentification IC, ATECC508A, from Microchip, a NFC TAG dynamic module, DTM0806, form SAG, two RGB led interfaces and a time-of-flight sensor interface mating connector. The circuit is able to be powered from a stable power source of 12 V or can be battery powered. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings and the 3D view of the board.
Electronic Shelf Label Base Board Mini (Flex Version)
This is the flex version of the light version of the ESL Base Board presented below. The circuit consists of a microprocessor SOC chip from Nordic Semiconductors, NRF52810, that has BTLE5.0 (Bluetooth) capability. Also there can be found a Crypto-Authentification IC, ATECC508A, from Microchip, a NFC TAG dynamic module, DTM0806, form SAG, two RGB led interfaces and a time-of-flight sensor interface mating connector. The circuit is able to be powered from a stable power source of 12 V or can be battery powered. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings and the 3D view of the board.
Electronic Shelf Label Base Board Mini (Flex Version)
4847360
The board shown below incorporates 6 different DC input power connectors and at the output there are two 16 pin headers. This board is versatile because it can accept power from various power adapters. The input voltage is between 7 – 24 V DC around a maximum current of 8.0 A and the output voltage will be approximately equal to 5.1 V and the board will deliver a maximum current of 5.0 A which is on board limited. The board has at the input an EMI filter, a fuse for high current protection and an ideal diode configuration comprising a MOS-FET for back-feeding protection. There are LEDs for input and output showing the board works properly. The main switching mode power supply DC/DC converter chip is the Vishay SiC461 that accepts 4.5 V to 60 V as input voltage, and can deliver a maximum of 10.0 A, comes in a microBUCK® package.
SIC461 High Current Switch Module Power Supply (SMPS) Hub
4847353
In this project a high speed digital circuit was designed and implemented. The circuit has at the center the SolidRun SOM iMX8M Quad board. The smart handle board consists of various high speed interfaces and the corresponding circuitry. The first interfaces are two USB2 and two USB3 interfaces. One USB2 controls a Quectel BG96/EG91 LTE SOC module and the other USB2 and an USB3 are used in conjunction with a 4 port USB3 HUB controller that communicates with an Opticon barcode scanner, a cVend payment module, an Omron face and human detection camera and the last one was left free for future component integration. Another high speed interface is the HDMI that will be used to connect the smart handle board with an LCD monitor. The board has incorporated a NFC PN7150 reader. There is a high speed CSI camera interface and a MIPI-DSI interface for a TFT display. The last two interfaces are a PCIe interface for an SSD memory and an Ethernet interface for internet connectivity.
Smart Handle with High Speed Digital Interface
In this project a high speed digital circuit was designed and implemented. The circuit has at the center the SolidRun SOM iMX8M Quad board. The smart handle board consists of various high speed interfaces and the corresponding circuitry. The first interfaces are two USB2 and two USB3 interfaces. One USB2 controls a Quectel BG96/EG91 LTE SOC module and the other USB2 and an USB3 are used in conjunction with a 4 port USB3 HUB controller that communicates with an Opticon barcode scanner, a cVend payment module, an Omron face and human detection camera and the last one was left free for future component integration. Another high speed interface is the HDMI that will be used to connect the smart handle board with an LCD monitor. The board has incorporated a NFC PN7150 reader. There is a high speed CSI camera interface and a MIPI-DSI interface for a TFT display. The last two interfaces are a PCIe interface for an SSD memory and an Ethernet interface for internet connectivity.
Smart Handle with High Speed Digital Interface
In this project a high speed digital circuit was designed and implemented. The circuit has at the center the SolidRun SOM iMX8M Quad board. The smart handle board consists of various high speed interfaces and the corresponding circuitry. The first interfaces are two USB2 and two USB3 interfaces. One USB2 controls a Quectel BG96/EG91 LTE SOC module and the other USB2 and an USB3 are used in conjunction with a 4 port USB3 HUB controller that communicates with an Opticon barcode scanner, a cVend payment module, an Omron face and human detection camera and the last one was left free for future component integration. Another high speed interface is the HDMI that will be used to connect the smart handle board with an LCD monitor. The board has incorporated a NFC PN7150 reader. There is a high speed CSI camera interface and a MIPI-DSI interface for a TFT display. The last two interfaces are a PCIe interface for an SSD memory and an Ethernet interface for internet connectivity.
Smart Handle with High Speed Digital Interface
In this project a high speed digital circuit was designed and implemented. The circuit has at the center the SolidRun SOM iMX8M Quad board. The smart handle board consists of various high speed interfaces and the corresponding circuitry. The first interfaces are two USB2 and two USB3 interfaces. One USB2 controls a Quectel BG96/EG91 LTE SOC module and the other USB2 and an USB3 are used in conjunction with a 4 port USB3 HUB controller that communicates with an Opticon barcode scanner, a cVend payment module, an Omron face and human detection camera and the last one was left free for future component integration. Another high speed interface is the HDMI that will be used to connect the smart handle board with an LCD monitor. The board has incorporated a NFC PN7150 reader. There is a high speed CSI camera interface and a MIPI-DSI interface for a TFT display. The last two interfaces are a PCIe interface for an SSD memory and an Ethernet interface for internet connectivity.
Smart Handle with High Speed Digital Interface
In this project a high speed digital circuit was designed and implemented. The circuit has at the center the SolidRun SOM iMX8M Quad board. The smart handle board consists of various high speed interfaces and the corresponding circuitry. The first interfaces are two USB2 and two USB3 interfaces. One USB2 controls a Quectel BG96/EG91 LTE SOC module and the other USB2 and an USB3 are used in conjunction with a 4 port USB3 HUB controller that communicates with an Opticon barcode scanner, a cVend payment module, an Omron face and human detection camera and the last one was left free for future component integration. Another high speed interface is the HDMI that will be used to connect the smart handle board with an LCD monitor. The board has incorporated a NFC PN7150 reader. There is a high speed CSI camera interface and a MIPI-DSI interface for a TFT display. The last two interfaces are a PCIe interface for an SSD memory and an Ethernet interface for internet connectivity.
Smart Handle with High Speed Digital Interface
In this project a high speed digital circuit was designed and implemented. The circuit has at the center the SolidRun SOM iMX8M Quad board. The smart handle board consists of various high speed interfaces and the corresponding circuitry. The first interfaces are two USB2 and two USB3 interfaces. One USB2 controls a Quectel BG96/EG91 LTE SOC module and the other USB2 and an USB3 are used in conjunction with a 4 port USB3 HUB controller that communicates with an Opticon barcode scanner, a cVend payment module, an Omron face and human detection camera and the last one was left free for future component integration. Another high speed interface is the HDMI that will be used to connect the smart handle board with an LCD monitor. The board has incorporated a NFC PN7150 reader. There is a high speed CSI camera interface and a MIPI-DSI interface for a TFT display. The last two interfaces are a PCIe interface for an SSD memory and an Ethernet interface for internet connectivity.
Smart Handle with High Speed Digital Interface
In this project a high speed digital circuit was designed and implemented. The circuit has at the center the SolidRun SOM iMX8M Quad board. The smart handle board consists of various high speed interfaces and the corresponding circuitry. The first interfaces are two USB2 and two USB3 interfaces. One USB2 controls a Quectel BG96/EG91 LTE SOC module and the other USB2 and an USB3 are used in conjunction with a 4 port USB3 HUB controller that communicates with an Opticon barcode scanner, a cVend payment module, an Omron face and human detection camera and the last one was left free for future component integration. Another high speed interface is the HDMI that will be used to connect the smart handle board with an LCD monitor. The board has incorporated a NFC PN7150 reader. There is a high speed CSI camera interface and a MIPI-DSI interface for a TFT display. The last two interfaces are a PCIe interface for an SSD memory and an Ethernet interface for internet connectivity.
Smart Handle with High Speed Digital Interface
In this project a high speed digital circuit was designed and implemented. The circuit has at the center the SolidRun SOM iMX8M Quad board. The smart handle board consists of various high speed interfaces and the corresponding circuitry. The first interfaces are two USB2 and two USB3 interfaces. One USB2 controls a Quectel BG96/EG91 LTE SOC module and the other USB2 and an USB3 are used in conjunction with a 4 port USB3 HUB controller that communicates with an Opticon barcode scanner, a cVend payment module, an Omron face and human detection camera and the last one was left free for future component integration. Another high speed interface is the HDMI that will be used to connect the smart handle board with an LCD monitor. The board has incorporated a NFC PN7150 reader. There is a high speed CSI camera interface and a MIPI-DSI interface for a TFT display. The last two interfaces are a PCIe interface for an SSD memory and an Ethernet interface for internet connectivity.
Smart Handle with High Speed Digital Interface
In this project a high speed digital circuit was designed and implemented. The circuit has at the center the SolidRun SOM iMX8M Quad board. The smart handle board consists of various high speed interfaces and the corresponding circuitry. The first interfaces are two USB2 and two USB3 interfaces. One USB2 controls a Quectel BG96/EG91 LTE SOC module and the other USB2 and an USB3 are used in conjunction with a 4 port USB3 HUB controller that communicates with an Opticon barcode scanner, a cVend payment module, an Omron face and human detection camera and the last one was left free for future component integration. Another high speed interface is the HDMI that will be used to connect the smart handle board with an LCD monitor. The board has incorporated a NFC PN7150 reader. There is a high speed CSI camera interface and a MIPI-DSI interface for a TFT display. The last two interfaces are a PCIe interface for an SSD memory and an Ethernet interface for internet connectivity.
Smart Handle with High Speed Digital Interface
4871415
In this project an electronics shelf label base board was designed and implemented. The circuit consists of a microprocessor SOC chip from Nordic Semiconductors, nRF52832, that has BTLE5.0 (Bluetooth) capability. Also there can be found an ePaper LCD display interface from Good Display, IL0373, an NXP NFC Reader interface, PN7150, an RGB led interface, a Secure IC interface from Microchip, an ISP TAG programming connector and a power interface with an SMPS chip from Texas Instruments, TPS62152RGTR. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings, the 3D view of the board and the enclosure with the board fitted.
Electronic Shelf Label Base Board
In this project an electronics shelf label base board was designed and implemented. The circuit consists of a microprocessor SOC chip from Nordic Semiconductors, nRF52832, that has BTLE5.0 (Bluetooth) capability. Also there can be found an ePaper LCD display interface from Good Display, IL0373, an NXP NFC Reader interface, PN7150, an RGB led interface, a Secure IC interface from Microchip, an ISP TAG programming connector and a power interface with an SMPS chip from Texas Instruments, TPS62152RGTR. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings, the 3D view of the board and the enclosure with the board fitted.
Electronic Shelf Label Base Board
In this project an electronics shelf label base board was designed and implemented. The circuit consists of a microprocessor SOC chip from Nordic Semiconductors, nRF52832, that has BTLE5.0 (Bluetooth) capability. Also there can be found an ePaper LCD display interface from Good Display, IL0373, an NXP NFC Reader interface, PN7150, an RGB led interface, a Secure IC interface from Microchip, an ISP TAG programming connector and a power interface with an SMPS chip from Texas Instruments, TPS62152RGTR. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings, the 3D view of the board and the enclosure with the board fitted.
Electronic Shelf Label Base Board
4871411
In this project an electronics shelf label sensor board was designed and implemented. The circuit consists of a microcontroller for time-of-flight applications from Intersil, ISL29501IRZ-T7A, a SMD Infrared led and a SMD photodiode. This sensor mates with the ESL base board presented in a section below. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings, the 3D view of the board and the enclosure with the board fitted.
Electronic Shelf Label Sensor Board (Intersil Sensor)
In this project an electronics shelf label sensor board was designed and implemented. The circuit consists of a microcontroller for time-of-flight applications from Intersil, ISL29501IRZ-T7A, a SMD Infrared led and a SMD photodiode. This sensor mates with the ESL base board presented in a section below. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings, the 3D view of the board and the enclosure with the board fitted.
Electronic Shelf Label Sensor Board (Intersil Sensor)
In this project an electronics shelf label sensor board was designed and implemented. The circuit consists of a microcontroller for time-of-flight applications from Intersil, ISL29501IRZ-T7A, a SMD Infrared led and a SMD photodiode. This sensor mates with the ESL base board presented in a section below. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings, the 3D view of the board and the enclosure with the board fitted.
Electronic Shelf Label Sensor Board (Intersil Sensor)
4871407
This is the light version of the ESL Base Board presented below. The circuit consists of a microprocessor SOC chip from Nordic Semiconductors, NRF52810, that has BTLE5.0 (Bluetooth) capability. Also there can be found a Crypto-Authentification IC, ATECC508A, from Microchip, a NFC TAG dynamic module, DTM0806, form SAG, two RGB led interfaces and a time-of-flight sensor interface mating connector. The circuit is able to be powered from a stable power source of 12 V or can be battery powered. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings and the 3D view of the board.
Electronic Shelf Label Base Board Mini
This is the light version of the ESL Base Board presented below. The circuit consists of a microprocessor SOC chip from Nordic Semiconductors, NRF52810, that has BTLE5.0 (Bluetooth) capability. Also there can be found a Crypto-Authentification IC, ATECC508A, from Microchip, a NFC TAG dynamic module, DTM0806, form SAG, two RGB led interfaces and a time-of-flight sensor interface mating connector. The circuit is able to be powered from a stable power source of 12 V or can be battery powered. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings and the 3D view of the board.
Electronic Shelf Label Base Board Mini
This is the light version of the ESL Base Board presented below. The circuit consists of a microprocessor SOC chip from Nordic Semiconductors, NRF52810, that has BTLE5.0 (Bluetooth) capability. Also there can be found a Crypto-Authentification IC, ATECC508A, from Microchip, a NFC TAG dynamic module, DTM0806, form SAG, two RGB led interfaces and a time-of-flight sensor interface mating connector. The circuit is able to be powered from a stable power source of 12 V or can be battery powered. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings and the 3D view of the board.
Electronic Shelf Label Base Board Mini
4871404
This is the flex version of the light version of the ESL Base Board presented below. The circuit consists of a microprocessor SOC chip from Nordic Semiconductors, NRF52810, that has BTLE5.0 (Bluetooth) capability. Also there can be found a Crypto-Authentification IC, ATECC508A, from Microchip, a NFC TAG dynamic module, DTM0806, form SAG, two RGB led interfaces and a time-of-flight sensor interface mating connector. The circuit is able to be powered from a stable power source of 12 V or can be battery powered. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings and the 3D view of the board.
Electronic Shelf Label Base Board Mini (Flex Version)
This is the flex version of the light version of the ESL Base Board presented below. The circuit consists of a microprocessor SOC chip from Nordic Semiconductors, NRF52810, that has BTLE5.0 (Bluetooth) capability. Also there can be found a Crypto-Authentification IC, ATECC508A, from Microchip, a NFC TAG dynamic module, DTM0806, form SAG, two RGB led interfaces and a time-of-flight sensor interface mating connector. The circuit is able to be powered from a stable power source of 12 V or can be battery powered. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings and the 3D view of the board.
Electronic Shelf Label Base Board Mini (Flex Version)
This is the flex version of the light version of the ESL Base Board presented below. The circuit consists of a microprocessor SOC chip from Nordic Semiconductors, NRF52810, that has BTLE5.0 (Bluetooth) capability. Also there can be found a Crypto-Authentification IC, ATECC508A, from Microchip, a NFC TAG dynamic module, DTM0806, form SAG, two RGB led interfaces and a time-of-flight sensor interface mating connector. The circuit is able to be powered from a stable power source of 12 V or can be battery powered. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings and the 3D view of the board.
Electronic Shelf Label Base Board Mini (Flex Version)
This is the flex version of the light version of the ESL Base Board presented below. The circuit consists of a microprocessor SOC chip from Nordic Semiconductors, NRF52810, that has BTLE5.0 (Bluetooth) capability. Also there can be found a Crypto-Authentification IC, ATECC508A, from Microchip, a NFC TAG dynamic module, DTM0806, form SAG, two RGB led interfaces and a time-of-flight sensor interface mating connector. The circuit is able to be powered from a stable power source of 12 V or can be battery powered. In the pictures below it can be observed the Assembly, Mechanical and Manufacturing drawings and the 3D view of the board.
Electronic Shelf Label Base Board Mini (Flex Version)
4847360
The board shown below incorporates 6 different DC input power connectors and at the output there are two 16 pin headers. This board is versatile because it can accept power from various power adapters. The input voltage is between 7 – 24 V DC around a maximum current of 8.0 A and the output voltage will be approximately equal to 5.1 V and the board will deliver a maximum current of 5.0 A which is on board limited. The board has at the input an EMI filter, a fuse for high current protection and an ideal diode configuration comprising a MOS-FET for back-feeding protection. There are LEDs for input and output showing the board works properly. The main switching mode power supply DC/DC converter chip is the Vishay SiC461 that accepts 4.5 V to 60 V as input voltage, and can deliver a maximum of 10.0 A, comes in a microBUCK® package.
SIC461 High Current Switch Module Power Supply (SMPS) Hub
4847353
In this project a high speed digital circuit was designed and implemented. The circuit has at the center the SolidRun SOM iMX8M Quad board. The smart handle board consists of various high speed interfaces and the corresponding circuitry. The first interfaces are two USB2 and two USB3 interfaces. One USB2 controls a Quectel BG96/EG91 LTE SOC module and the other USB2 and an USB3 are used in conjunction with a 4 port USB3 HUB controller that communicates with an Opticon barcode scanner, a cVend payment module, an Omron face and human detection camera and the last one was left free for future component integration. Another high speed interface is the HDMI that will be used to connect the smart handle board with an LCD monitor. The board has incorporated a NFC PN7150 reader. There is a high speed CSI camera interface and a MIPI-DSI interface for a TFT display. The last two interfaces are a PCIe interface for an SSD memory and an Ethernet interface for internet connectivity.
Smart Handle with High Speed Digital Interface
In this project a high speed digital circuit was designed and implemented. The circuit has at the center the SolidRun SOM iMX8M Quad board. The smart handle board consists of various high speed interfaces and the corresponding circuitry. The first interfaces are two USB2 and two USB3 interfaces. One USB2 controls a Quectel BG96/EG91 LTE SOC module and the other USB2 and an USB3 are used in conjunction with a 4 port USB3 HUB controller that communicates with an Opticon barcode scanner, a cVend payment module, an Omron face and human detection camera and the last one was left free for future component integration. Another high speed interface is the HDMI that will be used to connect the smart handle board with an LCD monitor. The board has incorporated a NFC PN7150 reader. There is a high speed CSI camera interface and a MIPI-DSI interface for a TFT display. The last two interfaces are a PCIe interface for an SSD memory and an Ethernet interface for internet connectivity.
Smart Handle with High Speed Digital Interface
In this project a high speed digital circuit was designed and implemented. The circuit has at the center the SolidRun SOM iMX8M Quad board. The smart handle board consists of various high speed interfaces and the corresponding circuitry. The first interfaces are two USB2 and two USB3 interfaces. One USB2 controls a Quectel BG96/EG91 LTE SOC module and the other USB2 and an USB3 are used in conjunction with a 4 port USB3 HUB controller that communicates with an Opticon barcode scanner, a cVend payment module, an Omron face and human detection camera and the last one was left free for future component integration. Another high speed interface is the HDMI that will be used to connect the smart handle board with an LCD monitor. The board has incorporated a NFC PN7150 reader. There is a high speed CSI camera interface and a MIPI-DSI interface for a TFT display. The last two interfaces are a PCIe interface for an SSD memory and an Ethernet interface for internet connectivity.
Smart Handle with High Speed Digital Interface
In this project a high speed digital circuit was designed and implemented. The circuit has at the center the SolidRun SOM iMX8M Quad board. The smart handle board consists of various high speed interfaces and the corresponding circuitry. The first interfaces are two USB2 and two USB3 interfaces. One USB2 controls a Quectel BG96/EG91 LTE SOC module and the other USB2 and an USB3 are used in conjunction with a 4 port USB3 HUB controller that communicates with an Opticon barcode scanner, a cVend payment module, an Omron face and human detection camera and the last one was left free for future component integration. Another high speed interface is the HDMI that will be used to connect the smart handle board with an LCD monitor. The board has incorporated a NFC PN7150 reader. There is a high speed CSI camera interface and a MIPI-DSI interface for a TFT display. The last two interfaces are a PCIe interface for an SSD memory and an Ethernet interface for internet connectivity.
Smart Handle with High Speed Digital Interface
In this project a high speed digital circuit was designed and implemented. The circuit has at the center the SolidRun SOM iMX8M Quad board. The smart handle board consists of various high speed interfaces and the corresponding circuitry. The first interfaces are two USB2 and two USB3 interfaces. One USB2 controls a Quectel BG96/EG91 LTE SOC module and the other USB2 and an USB3 are used in conjunction with a 4 port USB3 HUB controller that communicates with an Opticon barcode scanner, a cVend payment module, an Omron face and human detection camera and the last one was left free for future component integration. Another high speed interface is the HDMI that will be used to connect the smart handle board with an LCD monitor. The board has incorporated a NFC PN7150 reader. There is a high speed CSI camera interface and a MIPI-DSI interface for a TFT display. The last two interfaces are a PCIe interface for an SSD memory and an Ethernet interface for internet connectivity.
Smart Handle with High Speed Digital Interface
In this project a high speed digital circuit was designed and implemented. The circuit has at the center the SolidRun SOM iMX8M Quad board. The smart handle board consists of various high speed interfaces and the corresponding circuitry. The first interfaces are two USB2 and two USB3 interfaces. One USB2 controls a Quectel BG96/EG91 LTE SOC module and the other USB2 and an USB3 are used in conjunction with a 4 port USB3 HUB controller that communicates with an Opticon barcode scanner, a cVend payment module, an Omron face and human detection camera and the last one was left free for future component integration. Another high speed interface is the HDMI that will be used to connect the smart handle board with an LCD monitor. The board has incorporated a NFC PN7150 reader. There is a high speed CSI camera interface and a MIPI-DSI interface for a TFT display. The last two interfaces are a PCIe interface for an SSD memory and an Ethernet interface for internet connectivity.
Smart Handle with High Speed Digital Interface
In this project a high speed digital circuit was designed and implemented. The circuit has at the center the SolidRun SOM iMX8M Quad board. The smart handle board consists of various high speed interfaces and the corresponding circuitry. The first interfaces are two USB2 and two USB3 interfaces. One USB2 controls a Quectel BG96/EG91 LTE SOC module and the other USB2 and an USB3 are used in conjunction with a 4 port USB3 HUB controller that communicates with an Opticon barcode scanner, a cVend payment module, an Omron face and human detection camera and the last one was left free for future component integration. Another high speed interface is the HDMI that will be used to connect the smart handle board with an LCD monitor. The board has incorporated a NFC PN7150 reader. There is a high speed CSI camera interface and a MIPI-DSI interface for a TFT display. The last two interfaces are a PCIe interface for an SSD memory and an Ethernet interface for internet connectivity.
Smart Handle with High Speed Digital Interface
In this project a high speed digital circuit was designed and implemented. The circuit has at the center the SolidRun SOM iMX8M Quad board. The smart handle board consists of various high speed interfaces and the corresponding circuitry. The first interfaces are two USB2 and two USB3 interfaces. One USB2 controls a Quectel BG96/EG91 LTE SOC module and the other USB2 and an USB3 are used in conjunction with a 4 port USB3 HUB controller that communicates with an Opticon barcode scanner, a cVend payment module, an Omron face and human detection camera and the last one was left free for future component integration. Another high speed interface is the HDMI that will be used to connect the smart handle board with an LCD monitor. The board has incorporated a NFC PN7150 reader. There is a high speed CSI camera interface and a MIPI-DSI interface for a TFT display. The last two interfaces are a PCIe interface for an SSD memory and an Ethernet interface for internet connectivity.
Smart Handle with High Speed Digital Interface
In this project a high speed digital circuit was designed and implemented. The circuit has at the center the SolidRun SOM iMX8M Quad board. The smart handle board consists of various high speed interfaces and the corresponding circuitry. The first interfaces are two USB2 and two USB3 interfaces. One USB2 controls a Quectel BG96/EG91 LTE SOC module and the other USB2 and an USB3 are used in conjunction with a 4 port USB3 HUB controller that communicates with an Opticon barcode scanner, a cVend payment module, an Omron face and human detection camera and the last one was left free for future component integration. Another high speed interface is the HDMI that will be used to connect the smart handle board with an LCD monitor. The board has incorporated a NFC PN7150 reader. There is a high speed CSI camera interface and a MIPI-DSI interface for a TFT display. The last two interfaces are a PCIe interface for an SSD memory and an Ethernet interface for internet connectivity.
Smart Handle with High Speed Digital Interface
Cambios guardados
5.0 · 140 Reviews
Opiniones
M
Project for George Z. -- 2 • $19.950 USD
Yet another successful project with George. Long story short: he delivers. He helps us move our business forward with the new boards we can spec, design, produce and test in a short space of time. Thanks again George!
Matthew B.
@matthew43
•
Bandera de
MINNEAPOLIS, United States
•
hace 6 años
Compartir
M
Project for George Z. • $555 USD
I ALWAYS come to George for my design work. He is prompt, always adds value with thoughts about how to improve the designs, has great communication. Be in no doubt: he'll deliver for you. If you need to get a project delivered, he's the man to choose. I've been working with him for 2 years now, and I hope to be working with him for as long as he is available.
Matthew B.
@matthew43
•
Bandera de
MINNEAPOLIS, United States
•
hace 6 años
Compartir
J
EVS-11 Smartcard Reader • $8.807 USD
All worked very welll within time. I can recommend George Z. of course . Plan to do another project the next days.
Jürgen W.
@jw52
•
Bandera de
Deggendorf, Germany
•
hace 7 años
Compartir
L
DWM1000 pilot 2 • €330 EUR
George is a professional. He works into details and communicate promptly. I'm very satisfy with his work!
Closed User
@locatechs
•
Bandera de
,
•
hace 7 años
Compartir
M
Update FRAM, Watchdogs + Power Connection Positioning • $3.526 USD
It's a pleasure to work with George. I put ALL of my hardware requirements to him, for all of my projects. There's no point going to anyone else. You can rely on George. I look forward to using George as our go-to guy.
Matthew B.
@matthew43
•
Bandera de
MINNEAPOLIS, United States
•
hace 7 años
Compartir
Experiencia
PCB/Hardware/Electronics Design Engineer
ene, 2013 - Presente
•
11 años, 11 meses
Freelancer
ene, 2013 - Presente
•
11 años, 11 meses
https://deltapcbdesign.com/Past_Projects.html
ene, 2013 - Presente
•
11 años, 11 meses
Educación
Universitatea 'Ovidius' din Constanta
2004 - 2009
•
5 años
Electronics Design Engineering
Bandera de
Romania
2004 - 2009
•
5 años
Calificaciones
Extensive PCB Design Experience
2013
Freelancer
https://deltapcbdesign.com/CV.html
2013
Publicaciones
My Academic Experience
All My Publications
https://deltapcbdesign.com/Academic.html
¡Invitación enviada correctamente!
¡Gracias! Te hemos enviado un enlace para reclamar tu crédito gratuito.
Algo salió mal al enviar tu correo electrónico. Por favor, intenta de nuevo.
Logo de Freelancer Uruguay / Español
Ayuda y soporte
Freelancer
CategoríasProyectos Concursos Freelancers Empresarial Desarrollo de IA MembresíaPrograma de Freelancers Preferentes Gestión del proyecto Trabajos localesPhoto Anywhere GaleríaAPI para desarrolladoresVerifícate Software de escritorio
 Información
Quiénes somos Cómo funciona Seguridad Inversionista Mapa del sitio Historias NoticiasEquipoPremiosComunicados de prensaEmpleos
 Términos
Política de privacidadTérminos y condicionesPolítica de derechos de autorCódigo de conductaCargos y Tarifas
Socios
Escrow.comLoadshiftWarrior Forum
 Apps
Logo de "App Store" de AppleLogo de Google Play
Falló el copiado al portapapeles. Intenta de nuevo después de ajustar tus permisos.
Copiado al portapapeles.
Usuarios registrados Total de empleos publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2025 Freelancer Technology Pty Limited (ACN 142 189 759)
Cargando visualización previa
Permiso concedido para Geolocalización.
Tu sesión de acceso ha expirado y has sido desconectado. Por favor, inica sesión nuevamente.