Esp32 i2s exampletrabajos
Hola, busco a alguien con experiencia con Arduino y comunicacion RF, necesito crear un sistema donde muchos esclavos escuchen a varios masters y estos puedan responder a los master El trabajo sería la elección del modulo a elegir (rf, nrf, lora, etc..) y un pequeño codigo funcional para master y esclavo en esp32 Se necesita máxima distancia (100-500 metros) y posibilidad de ACK , hay probabilidad de que algunos esclavos emitan en el mismo momento, por tanto pueden ocurrir colisiones y habría que desarrollar una solución
Necesito el desarrollo de dos Bibliotecas Modbus, una RTU rs485 Master y otra TCP Master que trabaje con el microcontrolador ESP32. Que cuente con comunicacion estable y siempre enlace. Para Platformio en Atom o para Arduino IDE.
Necesito que envíe una imagen que mi esp32 ya captura y enviarla por la gprs de mi sim800l
Un proyecto en el cual requiero que mi esp32-cam envíe la imagen por http con un id de imagen, nombre de imagen, y otras cosas.
...contains esp32, gprs a6 ai-thinker, sd card, 4 relays, 1 multiplexer, and other small components, it is not a complicated design Circuit 2: Check schematic Generate PCB Generate BOM file compatible with pcbway specifications Design contains esp32, sd card, 2 wigand reader, 2 relay and along with other small components such as resistors and capacitors, it is not a complicated circuit --------------------------------------------------------------------------------------------------------------- tengo dos circuitos que necesito checkear. Ambos circuitos estan diseñados en easyEDA Circuito 1: Revisar esquemático si esta bien diseñado Modificar la pcb de ser necesario (aunque no creo que sea necesario) Generar archivo bom de acuerdo a las especificacione...
and build an IoT device through commercial Arduino i.e. ESP32 modules with wireless modules + control module + storage module (They can be those offered by Aliexpress or Amazon). 2. It must have temperature inputs, gas sensor (only for alarm), presence or movement sensor, measurement of 1, 2 or 3 phases of current with CT from 10 to 100A. and voltage measurement. 3. You must allow to store the temperature and current data for minutes and hours and corresponding date. 4. The data must be stored in the memory or module with microSD. 5. You must allow to extract the data through the USB port and through the WIFI module with an interface that connects to a database on the WEB. Or via Bluetooth or WIFI with an App from the cell phone. 5. You must have a solid state relay module. W...
...(yo me encargo de este código) - Enviar al UART un string desde PHP, por ejemplo uart("datos para arduino"); - Script que al recibir por UART datos desde arduino, ejecute un archivo PHP con el string recibido - Poder enviar datos Online con php (por ejemplo, con curl) de manera transparente - Script o instrucciones para conectar Raspberry a wifi (ssid, pass) mediante wifi o bluetooth Arduino (esp32) estará conectado obligatorio a Raspberry por su puerto microusb, en el lado de Raspberry puede ser conectado donde se quiera (gpio, usb, otros) El codigo de Arduino es tarea mía...
necesito realizar un web server embebido para seleccionar redes inalambricas al alcance. 1º debe escanear bien todas las redes a su alcance y actualizar constantemente la señal de cada una (solo mostrar redes con 40% o mas de señal) 2ºdeben existir dos campos para configurar dos redes diferentes (una principal y otra secundaria) 3º debe existir un timer configurable para que se testee la comunicacion por ambas redes wifi. cada x tiempo 4º en caso de perder la comunicación con la principal, esperar X tiempo antes de saltar al secundario. 5º en caso de perder la señal de la principal, esperar X tiempo antes de saltar al secudario. 6º en caso de volver a detectar señal de la emisora primaria, debe esperarse un tiempo X antes de...
Tengo unas imágenes en 3d de un proyecto arquitectónico, pero el proyecto sufrió algunas modificaciones, cuento con archivos .FBX, y necesito actualizar las imágenes y los archivos al nuevo proyecto. Requiero una imagen como la que subí, y además el archivo .FBX modificado I need an image like the one provided, and the modified .FBX file. The .FBX files provided belong to the previous layout. The .pdf is the new layout. I need the .jpg and the modified .FBX
Necesito esquema y codigo para comunicacion entre 2 arduinos esp32 por cable, voy a usar 2 hilos libres de un cable de red, distancia 15 metros, solo necesito informar desde un esp32 hacia el otro, no necesito respuesta o bi comunicación, sólo necesito informar de 5 eventos Ejemplo ESP1 -> ESP2 : Evento A repetido 5 veces por segundo
crear un ejemplo en java de android para conectar a un webservice
Hola John Arturo. Soy Juan de Colombia. Estoy desarrollando un proyecto de IOT utilizando AWS IOT y el dispositivo ESP32. Estoy buscando una persona que nos apoye en la parte especifica de desarrollo de Firmware usando Amazon Freertos. Quisiera Saber si te interesaría conocer mas detalles del proyecto. Saludes
Me encuentro desarrollando unos PCB para conectar ESP8266/ESP32 para proyectos de mi hogar y necesito orientación/respuestas a algunas preguntas sobre electrónica
I need an infographic for a system called conektame can find more information in I need the following information in addition to a design that explain each point and letter size attracts attention and fully configure it for my text and images that can be manipulated in Photoshop: 1.- What is Conektame? Turn your Wi-Fi connection in a modern marketing tool 2.-How does it work? A drawing illustrating and text that says A) the client requests to connect to the free wifi B) the client connects to the wireless network without Internet access C) the system asks him conektame like, follow or answer a short survey D) reward for their customers free wifi 3. Know your customers With our extensive range of tense to access individual reports and statistics about your customers to mor...
This is to bring attention to my programming CONTEST at: https://www.freelancer.com/contest/CrossPlatform-basic-example-app-with-JNI-Flutter-or-KotlinNative-Multiplatform-for-AndroidiOSetc-EST-2514642/details So do not BID here, instead GO TO the CONTEST at: https://www.freelancer.com/contest/CrossPlatform-basic-example-app-with-JNI-Flutter-or-KotlinNative-Multiplatform-for-AndroidiOSetc-EST-2514642/details
The basic example app is simple, just include several small binaries of Hello-World compiled/built with Rust/C/C++/golang and the app must execute them and display the app message in an activity or 'view'. So you will need to use JNI or ffi or channels or bridges if using flutter etc. You can use whatever cross-platform method you prefer. You must provide all sources and binary for Android and one other platform. Clear? The app will simply call several versions of "Hello World!" binaries (one in C, C++, Rust..) inside the "Apk" for example, and display the Hello World output in some GUI (graphical view/user interface) of the app. You can post just the BINARIES and provide the Source Code "after" you are AWARDED the contest. THAT&#...
I want to create a remote start system for my BMW E60. The system will use an esp32 c3 to communicate with my phone, and a arduino mega to handle the sensors,and everything else ( esp is only for comunication ). Once close, it should start the car. As a backup, it will use an R503 fingerprint sensor for authentication. The app is already made by me in thunkable Key components of the project: - mcp2515 to detect engine RPM and door status via bmw K-kan bus. - Arduino to check shifter position using a Hall sensor, engine RPM and handbrake signal to permit remote start. Communication: - The primary communication method will be Bluetooth Low Energy (BLE) to interact with my phone. I need someone who is: - Very active on freelancer or platforms like WhatsApp, Facebook, etc. - Willing...
More details: What type of items will the CNC machinist primarily work on? Metal components - mostly stainless steel parts Which machining operations are required for these metal components? Turning, Milling, Drilling - none but he needs to have the understanding to see whats invoved in the job to order material. What kind of drawing formats will the CNC machinist be working with? DXF files - and pdf drawings.
My PCB for industrial machinery has been failing and I need a professional to review my schematic and board layout files. The board is controlled by an ESP32 and displays via a Nextion on UART. Issues to Address: - Interference between components - Unexpected resets or failures - Communication errors with peripherals Measures Taken: - Shielding - Filtering - Grounding techniques - Decoupling - Suggestions for field wiring to board -component values -adding any protection components or change values I look forward to your expertise in identifying any potential issues that could cause my board to fail in this industrial setting.
...project involves programming an ESP32 to work with a GPS correction system using NTRIP and communicating with the ZED-F9P module via I2C. Code is ready but we are having some issues, and they must be fixed. - we have the project hardware done, just need to get the code fixed, we can test locally after changes. Project Overview: The system receives GPS correction data via NTRIP using an internet connection through either Wi-Fi or mobile data. These corrections are then transmitted to the ZED-F9P module to enhance GPS accuracy. Currently, the code has issues specifically with mobile data connectivity and the NTRIP connection. Required Skills: ● Advanced experience in C++ programming ● Proficiency with the Arduino IDE and related libraries ● Expertise with ESP32, specific...
...dual GC9A01 displays for an advanced animated eyes project using the ESP32-S3 microcontroller. The project involves creating smooth and seamless frame-by-frame animations for a pair of 240x240 pixel displays. The animations will be based on high-quality JPG frames, leveraging libraries such as LVGL, CircuitPython, and TJpg_Decoder. The key objectives include: Synchronization: Both displays need to be perfectly synced for consistent animations across the eyes. Web-based Control: Develop a WiFi-enabled control panel that allows users to connect via a hotspot and select animation modes through a web interface. Animation Modes: Support multiple animation modes, including static and dynamic frames, while optimizing for the ESP32-S3’s storage and performance capabilities...
Hi, I’m looking for a freelancer to help me design two PCB variants for a stair-lighting controller using a 38-pin ESP32 Dev Module (USB-C). This system will power and control WS2812 LED strips and incorporate multiple sensors for an intelligent lighting setup. Below is an overview of what I need, followed by detailed requirements. At the end, I’ve included links and attachments referencing a similar board and my own sketches. >>> Overview of the Project 1. Goal: Create two PCB variants (Version A and Version B) of a stair-lighting controller for WS2812 LEDs: - Variant A: 2 LED outputs, - Variant B: 16 LED outputs. 2. Board: Uses an ESP32 Dev Module (38-pin, USB-C) mounted on female headers (no extra programming buttons needed). 3. Sensors: 2&tim...
I'm looking for an experienced programmer well-versed in Python and GPIO interfacing with ESP32. I need a script that will help automate device scheduling based on a daily timetable. Key Requirements: - The project involves 4 GPIOs, all of which should function independently. - Each of the four outputs should have different, selectable schedules. - The device should be able to turn on and off according to this daily timetable. Ideal Skills: - Proficiency in Python programming. - Extensive experience working with ESP32 and GPIOs. - Previous experience in automating device scheduling. Developer is developing the front end for the aap and firmware patch for this schedule. I look forward to your proposals.
I'm in need of a seasoned expert to assist with the hardware design of an ESP32-S3 project, specifically focusing on component selection. The primary area of concern is the selection of appropriate communication modules. Ideal Skills and Experience: - Extensive knowledge and experience with ESP32-S3 hardware and component selection - Proficiency in identifying suitable communication modules for various applications - Previous experience with PCB design and hardware troubleshooting - Strong understanding of power management and relevant components.
I am seeking a talented Web Developer to assist in completing my career guidance website project. The UI design has been created in Figma, and the Machine Learning models have been developed - all resources will be provided. Your role will be to integrate three pre-built Machine Learning models into the site, develop and finalize the website according to the provided UI interface and models, and ensure the entire project runs smoothly and offers a user-friendly experience. Ideal candidates should be proficient in both front-end and back-end web development, have experience integrating Machine Learning models into web applications, and possess a strong understanding of responsive design and user experience.
I'm looking for a developer experienced with Eclipse Theia to create a project navigator application based on a JSON feed tree. Key Features: - A detailed page with multiple tabs similar to Eclipse's development interface. - A tree navigator which displays JSON data. Right-clicking on a tree object brings up a context menu to draw a simple circular layout network diagram. - When a node of the diagram is clicked, the node's properties are shown in a property table and help information is displayed in a right pane. - The ability to print the diagram from a top menu print tool. - A three-pane layout consisting of a diagram pane, a detail information pane and a help pane. Data and Implementation: - The application will source its JSON feed from local files. - The network diag...
I'm looking for an experienced developer to write software for an ESP32 module. The primary function of the ESP32 will be to collect sensor data. The ESP32 will need to communicate this data using both WiFi and Bluetooth, with a specific focus on implementing Bluetooth Low Energy (BLE). Ideal skills and experience for the job: - Proficient in programming ESP32 modules - Experience with sensor data collection - Strong understanding of WiFi and Bluetooth communication protocols - Specific experience with Bluetooth Low Energy (BLE) - Ability to write efficient, reliable software for real-time data collection and transmission.
...or 3" BI-LED Projector, a lot of options/pictures will show up for reference. 1-The First STL File: THE SAME EXACT Lens Locking Bracket. (in the attached pictures) 2-The Second STL File: The same file you created, 1 minor modification, the bracket has 1 big gap in the bottom. i need to make one matching gap on the opposite side. The Goal here. i Invented a Servo Mechanism controlled by a mini esp32 c3, the Servo arm is connected to a round GC9A01 Display controlled by a switch. when switch is turn on, the servo arm goes down 90 degrees to line up the display in the center of the lens. when switch is turned off, the servo arm goes back to its original location. For Testing Purposes, i have 1 BI-LED. i cut 1 arm (top left) and carved a small portion of the black mounting le...
...a compact, double-layer PCB designed for a digital circuit. The project involves creating a Gerber file that is ready for printing, accommodating the given circuit diagram. The PCB should be small and compact, suitable for accommodating a digital circuit. The 2 ESP32, SIM800L, MAX 485 and ADS1115 will be mounted on a 2.54 mm pin female single-row header strip. All connectors will use 5 mm PCB terminals with standard 0.1” (2.54 mm) spacing through holes. Components Ref: ESP32 38Pin Development Board: Hi Link HLK-PM01 5V/10W: 2.54mm Pin Female Single Row Header Strip:
...me with a high-accuracy speech recognition project using the ESP32-S3 board. Key Responsibilities: - Design and implement an embedded system with the ESP32-S3 board. - Optimize and integrate the ESP-Skainet speech recognition library for our needs. - Ensure the system achieves high levels of speech recognition accuracy. Ideal Skills and Experience: - Proficient with the ESP32-S3 board. - Extensive experience in embedded systems design. - Strong skills in working with the ESP-Skainet speech recognition library. The objective of the project is to create a system where a phone connects to an ESP32-S3 board via Bluetooth. The phone will send a user-defined keyword to the ESP32-S3, which will then be set for recognition. The ESP32-S3 board will us...
I need a circuit board designed and built that uses an ESP32 to drive a large number of LEDs (SMD, 300-500). The LEDs should be arranged to represent a detailed map that will be provided. Key Requirements: - Design and construct a visually appealing circuit board (as it may be directly exposed to end user) - Use an ESP32 to control a large number of LEDs (you will have to explain how you plan on doing this) - Arrange the LEDs according to a detailed city map which I will provide on the circuit board. Ideal Skills and Experience: - Electronics and circuit board design - Proficiency with ESP32 - Experience with LED projects - Design skills for creating an aesthetically pleasing product
I'm working on a unique project - animating car headlights to resemble eyes, like the devil demon eyes, using an ESP32. I have already written 75% of the code and set up two TFT displays (GC9A01) to serve as the 'eyes', but I need assistance with the following: - Library Integration: I need help finding the right libraries to complete my project. - Display Synchronization: The two screens need to be perfectly synced, and I could use some guidance on how to achieve this. i invented a servo with a code to turn the eye inside the headlight on and off, thats done and ready. - Animation Rendering: So far, I've only been able to implement basic animations like blinking and rolling. I would like advice on how to create more complex sequences. In addition, I need an ST...
...animations like blinking, rolling, and complex eye-like movements. This project will use an ESP32 microcontroller and two GC9A01 TFT displays. Key requirements include: - Using frame-by-frame animation techniques with libraries such as LVGL, TFT_eSPI, TJpg_Decoder, and SPIFFS or LittleFS for storage. - Smooth rendering and advanced functionality. - Implementing a servo motor mechanism for controlling the 'eye' turning feature inside the headlight. - Creating a web-based control panel integrated via a WiFi hotspot for dynamic user interaction. - Designing a 3D-printed bracket housing to securely hold a 77 mm lens on a bi-LED projector. Ideal skills and experience for this job: - Proficiency in using ESP32 microcontroller and GC9A01 TFT displays. - Strong backgr...
I am looking for a professional to help create unique, animated car headlights for my vehicle. The headlights should resemble expressive eyes and be able to perform various synchronized animations such as blinking, rolling, and complex eye-like movements. Key project requirements include: - Utilizing an ESP32 microcontroller and two GC9A01 TFT displays - Implementing a servo motor mechanism to control the 'eye' turning feature - Achieving seamless display synchronization - Advanced animation rendering - Designing a 3D-printed bracket housing to securely hold a 77 mm lens on the bi-LED projector In addition to technical precision, creative design is key to this project. Ideal skills and experience for this job include: - Proficiency in microcontroller programming - Expe...
I'm working on a unique project - animating car headlights to resemble eyes, like the devil demon eyes, using an ESP32. I have already written 75% of the code and set up two TFT displays (GC9A01) to serve as the 'eyes', but I need assistance with the following: - Library Integration: I need help finding the right libraries to complete my project. - Display Synchronization: The two screens need to be perfectly synced, and I could use some guidance on how to achieve this. i invented a servo with a code to turn the eye inside the headlight on and off, thats done and ready. - Animation Rendering: So far, I've only been able to implement basic animations like blinking and rolling. I would like advice on how to create more complex sequences. In addition, I need an S...
I'm seeking a professional consultation on the ESP32-S3 SIM7670G 4G Development Board. The primary application for this project is remote monitoring of security and surveillance data via analog cameras. Key Responsibilities: - Provide expert guidance on the optimal use of the ESP32-S3 SIM7670G 4G Development Board for remote security monitoring. - Assist in the integration of analog cameras with the board for effective surveillance. - Recommend best practices for data collection and transmission. Ideal Skills: - Extensive experience with the ESP32-S3 SIM7670G 4G Development Board. - Proficiency in IoT and remote monitoring systems. - Strong understanding of security and surveillance systems, particularly with analog cameras. - Excellent communication skills for...
I want to create a remote start system for my BMW E60. The system will use an esp32 c3 to communicate with my phone, searching for a BLE beacon and a arduino mega to handle the sensors,and everything else ( esp is only for comunication ). Once close, it should start the car. As a backup, it will use an R503 fingerprint sensor for authentication. Key components of the project: - mcp2515 to detect engine RPM and door status via bmw K-kan bus. - Arduino to check shifter position using a Hall sensor, engine RPM and handbrake signal to permit remote start. Communication: - The primary communication method will be Bluetooth Low Energy (BLE) to interact with my phone. I need someone who is: - Very active on freelancer or platforms like WhatsApp, Facebook, etc. - Willing to communicate v...
...double-layer PCB designed for a digital circuit. The project involves creating a Gerber file that is ready for printing, accommodating the given circuit diagram. The PCB should be small and compact, suitable for accommodating a digital circuit. The ESP32, SIM800L, and ADS1115 will be mounted on a 2.54 mm pin female single-row header strip. All connectors will use 5 mm PCB terminals with standard 0.1″ (2.54 mm) spacing through holes. 6 X 14 CM PCB Board - Power PCB 14 x 14 CM PCB Board ESP32 38Pin Development Board --> Hi Link HLK-PM01 5V/10W --> 2.54mm Pin Female Single Row Header Strip -->
I'm looking for a skilled developer to create a straightforward VST utility plugin. The primary function of this plugin is to output audio from a mixer track over USB to an ESP32. Key Requirements: - The VST utility tool needs to be compatible with both Windows and macOS platforms. - Understanding and experience with ESP32 integration will be a significant advantage. - Knowledge in developing VST plugins and audio processing will be highly beneficial. Please ensure to include examples of your previous work with VST plugins in your proposal.
I'm looking for a skilled video editor to create a project similar to the example video provided here: Here’s what I’ll provide: - The lyrics for the video. - Video clips to be used. - Background music. Your role would be to: - Edit the video by combining the clips, music, and lyrics so they sync seamlessly. - Ensure the final product has a style and feel similar to the example video. If you can replicate this style and bring the project to life, I’d love to work with you! Please share examples of similar work if available. We would start with this project. From there, I would want you to create between 1 - 5 videos monthly.
I need an expert in data security, privacy, and blockchain to work on a project involving secure proximity activations using smart devices. Overview: - The system should be activated by a SmartPhone entering a location. - The system should open gates, turn on lig...(BLE) Secure Connection for security. Skills and Experience Required: - Extensive knowledge in data security and privacy. - Proficient in integrating with smart devices. - Experience working with Bluetooth Low Energy (BLE) Secure Connection. - Familiarity with using MPU (Raspberry) devices and Docker Container-based System. - A new advertisement system should be adopted. (Or alternatively - MCU (ESP32) devices are considered leveraging Jaguar Container-based Systems - Secure Proximity Activations MCU-based in TOIT langu...
I need a skilled developer to enhance my React Native ESP32 IoT app with several important additions and improvements. Key Requirements: 1. Add a widget to the app that displays the next prayer time. 2. Enhance the overall performance of the app. 3. Fix minor bugs, particularly with audio playback and the countdown timer. 4. Implement BLE - esp-idf-provisioning for connecting the app with the device to play audio at scheduled times. 5. Prepare the code for a successful launch on Android and iOS app stores. The highest priority for this project is the BLE - esp-idf-provisioning implementation. Experience with React Native, IoT applications, and BLE connectivity is crucial. A strong understanding of performance enhancement techniques in mobile applications will also be beneficial. ...
I'm seeking an expert in ESP32 microcontroller and MQTT Mosquitto Broker who can help me with a project aimed at remotely controlling appliances over Wi-Fi. Key Requirements: - Design and implement an ESP32 based system for remote control of appliances. - Integrate MQTT Mosquitto Broker for communication management. - Ensure Wi-Fi is utilized as the main communication method. Ideal Skills and Experience: - Proficient in programming and working with ESP32. - Strong understanding and experience with MQTT Mosquitto Broker. - Prior experience with home automation projects would be a plus.
I need to create a library that allows the ESP32-S3 to connect to a computer as an MSC device to access the FAT partition. I found an interesting example on GitHub () that is close to what I need, but the library has some issues: it often fails to mount correctly. I am looking for someone who can fix the problem or create a new library that works as expected.
I'm working on a robotics project and need assistance with programming an ESP32 to control stepper and servo motors for robot arms. Key Requirements: - Extensive experience with ESP32 programming - Proficient in controlling stepper motors and servo motors - Understanding of robotics and robot arm mechanics - Ability to write efficient and effective control code The goal is to have a seamless control system for the robot arms using the ESP32. Your previous experience in similar projects will be a significant advantage.
The pcb will be done using easy eda.. Garber, BOM and CPL needed to be deliver
I have an ESP32-CAM project that needs to recognize a few custom objects and execute a pre-written Arduino program based on the recognition. The program is already ready, and I simply need the ESP32-CAM to identify the objects and trigger the next action. The specifics of the project include: - Recognizing 1-5 custom objects with the ESP32-CAM - Using a manually collected image dataset to train the recognition system Ideal candidates for this project should have: - Experience with ESP32-CAM and Arduino - Skills in object recognition and machine learning - Ability to work with custom datasets - Proficiency in programming and hardware interfacing
...experienced hardware and firmware developer to create a WiFi-enabled pen drive using an ESP32 module and an SD card module. This device should function as a traditional USB pen drive while also enabling wireless data transfer and management. Key Requirements: - The primary use case for this device is business file sharing. This means it should be able to handle large files, work reliably, and be user-friendly. - For the wireless management and data transfer, I'm specifically interested in the FTP protocol. - In terms of security, the device should include password protection to ensure secure file sharing. Ideal Skills and Experience: - Extensive experience in hardware and firmware development. - Prior work with ESP32 modules and SD card modules. - Familiarity with c...
