Data sniffertrabajos
Hi Sameh R., I noticed your profile and would like to offer you my project. We can discuss any details over you have any experience with network sockets? basically need a packets sniffer which can extract some required information. if you are interested, let me know so I can send you the required details.
Hi Khanh T., do you have any experience with network sockets? basically need a packets sniffer which can extract some required information. if you are interested, let me know so I can send you the required details.
Hi Nabeel R., do you have any experience with network sockets? basically need a packets sniffer which can extract some required information. if you are interested, let me know so I can send you the required details.
I have some hardware that connects over bluetooth. I have traced the commands using a packet sniffer. I need to build a small test app that sends the commands as per my document and show outputs as needed.
An expert in network sniffting / api extracting is needed. Android device is needed.
this service, remove spaces: https:// openbullet. .html i need this service, but i need this anti sniffer, the software work in http, but i need this anti sniffer
Tenho um sistema que se comunica com uma api, porém essa API fica vulnerável a sniffer. Ou seja, qualquer pessoa com acesso ao meu sistema irá conseguir acessar essa API e baixar os arquivos compartilhado via API. O programa é em c# Uso uma API padrão que já vem inclusa. Gostaria de deixar esses dados encriptados.
...RFID frequency band, typically 860-960MHZ • Use YARDStick One to analyze, sniff communications between RFID reader and tags through its RFCat firmware. • Decode in ASCII, store and present the information that is sniffed between UHF reader and the UHF RFID tags. • Identify which specific tag(s) being read and source of UHF RFID messages, errors, status info, statistics and rough distance from sniffer. We have a system setup with RFID reader, 2 Yardsticks and several RFID tags (it is reading the communications as waveforms) that will be made available remotely or you suggest alternative ways to help with the project. Use Linux or Windows for development & deployment - must inform us which one. Also, get our approval for the IDE to use. All the source code, ...
...modification. I have miner and raspberry pi with RTL-Sdr R820T2 RTL2832U dongles for the gateways ready to go. I have no problems helping you debug and test the code as we go as I already have the setup. "*You want to send data from one gateway to multiple on-chain miners to potentially increase earnings by increasing witnessing and potential selection for "next hop" in PoC *You have multiple DIY gateways but only a single on-chain DIY miner (in alpha program). you can route data from all of your gateways to your single miner increasing the ability to receive data, challenges, etc. ** *You have a gateway not located at its asserted location and you want to modify received metadata to avoid PoCv9/v10 thresholds. Any combination of the above.&quo...
Hello, I am looking for a developer who can create a script to sniff phone numbers (sip/pjsip over tls). In order to avoid reading the CDR regularly, I would like a webhook that calls a url. I need date, time, calling phone number, called phone number, transaction id, call duration, status: response codes The do...phone numbers (sip/pjsip over tls). In order to avoid reading the CDR regularly, I would like a webhook that calls a url. I need date, time, calling phone number, called phone number, transaction id, call duration, status: response codes The documentation for the installation of the script. Environment : Server : PBXware (tls / ssl, pjsip/sip) Smartphone : Communicator / Glocom Linux server (sniffer) : Debian Language: python Library: scapy or other. Transport: t...
...WooCommerce marketplace. It is important that we are able to release new versions of the plugin in a timely manner, and there are no blockers to plugin release. Position summary You’ll be working with our developers and management team to deliver stable, functioning, bug free releases of Plugins via GitHub and the WooCommerce platform. You’ll be addressing WooCommerce related issues like PHP Sniffer, and resolving those yourself where possible. We’ll also be looking to you to improve code quality, code security, and provide suggestions and ideas. Hours per week This role is approximately 15-20 hours per week and will fluctuate with demand. Location Flexible. Ideally you will be available during the Indian work day, or overlap substantially with it to ...
...Work with RFCat firmware in UHF RFID frequency band, typically 860-960MHZ • Use YARDStick One to analyze communications between RFID reader and tags through its RFCat firmware. • Decode and present the information that is sniffed between UHF reader and the RFID tags. • Identify which specific tag(s) being read and source of UHF messages, errors, status info, statistics and rough distance from sniffer. We have a system setup with RFID reader, 2 Yardsticks and several RFID tags (it is reading the communications as waveforms) that will be made available remotely or you suggest alternative ways to help with the project. Use Linux or Windows for development - must inform us which one. Also, get our approval for the IDE to use. All the source code and any supporting d...
Want to develop WiFi Sniffer using ESP32. Should be able to display data through Web UI. Need to be Arduino code. Example :
I am looking for a Firmware engineer who can write an SDK for 1 Bluetooth device. I have the Bluetooth protocol document, to connect and read the data from this device. The device has its own mobile app, which works fine, but I want it to connect to my mobile app. I want to create an SDK in arr. file (Android) and .framework for IOS devices. Business Requirement 1. The devices a Blood pressure monitor and I cannot send it to your office if you reside in countries where the custom duties are very high and take too much time to reach, like India. 2. I prefer to do it remotely, and I can support 100% to get any sniffer data out of the device to help you built and test the SDK 3. Although I prefer one person to deliver Android and IOS SDK, but if you specialize on only A...
I am looking for a Firmware engineer who can write an SDK for 1 Bluetooth device. I have the Bluetooth protocol document, to connect and read the data from this device. The device has its own mobile app, which works fine, but I want it to connect to my mobile app. I want to create an SDK in arr. file (Android) and .framework for IOS devices. Business Requirement 1. The devices a Blood pressure monitor and I cannot send it to your office if you reside in countries where the custom duties are very high and take too much time to reach, like India. 2. I prefer to do it remotely, and I can support 100% to get any sniffer data out of the device to help you built and test the SDK 3. Although I prefer one person to deliver Android and IOS SDK, but if you specialize on only A...
...Work with RFCat firmware in UHF RFID frequency band, typically 860-960MHZ • Use YARDStick One to analyze communications between RFID reader and tags through its RFCat firmware. • Decode and present the information that is sniffed between UHF reader and the RFID tags. • Identify which specific tag(s) being read and source of UHF messages, errors, status info, statistics and rough distance from sniffer. We have a system setup with RFID reader, 2 Yardsticks and several RFID tags (it is reading the communications as waveforms) that will be made available remotely or you suggest alternative ways to help with the project. Preferred development IDE is MS Visual Studio. Others will be considered if approved by us first. All the source code and any supporting docs will b...
help with this project Wi-Fi Sniffer as a Human detector want to add https rather then mqtt or some other way to see live tracking data of approaching devices and alllso add a way to log if a devices if found to be near or fowling the user ( radar}
- Must have nRF52 or nRF51 board on hand. - Bread board task requiring configuring a button to function through XInput over BLE. - I do not need a custom board, a simple dev kit can be used by Adafruit or others. - May require use of BLE sniffer to catch BLE data. - BLE gamepad should be XInput standard gamepad on PC. - Required testing method of Fortnite.
...Work with RFCat firmware in UHF RFID frequency band, typically 860-960MHZ • Use YARDStick One to analyze communications between RFID reader and tags through its RFCat firmware. • Decode and present the information that is sniffed between UHF reader and the RFID tags. • Identify which specific tag(s) being read and source of UHF messages, errors, status info, statistics and rough distance from sniffer. We have a system setup with RFID reader, 2 Yardsticks and several RFID tags (it is reading the communications as waveforms) that will be made available remotely or you suggest alternative ways to help with the project. Preferred development IDE is MS Visual Studio. Others will be considered if approved by us first. All the source code and any supporting docs will b...
I would like to have a monitoring system (if possible) to use ESP 8266 (ESP-01) to get/sniff MAC addresses of near by devices and print in terminal MAC address with signal strength. Update: I'm looking for solution to try to use new options in chip ESP8266 ("wifi_send_pkt_freedom" function) and get MAC addressees on all nearby WiFi devices like computers, phones or tablets. I'm not interested in other WiFi hotspots and their signal strength. This is a tricky task and it is suitable for experts in ESP8266 & WiFi protocols.. To respect privacy MAC addresses of each device could stored in hash in array with time & RSSI This project needs to be done for android OS 7.1. I would like to count how many unique mac addresses every 5 minutes. I would also like to k...
I see you retracted your proposal. What is the problem ? Can this not be done in VB ?
hello i need someone to make an improvement to an existing python code Improved presentation of sniffer results by correctly identifying protocols, for example, instead of displaying “Protocol 6”, displaying “TCP Protocol”. Identification and treatment for ICMP protocol; Identification and treatment for HTTP protocol; Improved handling of TCP protocol; Identification and treatment for UDP protocol; Add IPV6 packet handling capability; Save the output to file or screen to facilitate further analysis (today it is only displayed on the console);
Looking to create an item sniffer for a game, and show hidden walls and portals. Attached is an old project for it that needs updating and to create a windows server to parse data (unless can be done stand alone)
I would like to create a device that will capture the MAC Address and it will count and archive how many devices passed by that time. I saw a lot of recommendations for the ESP 8266. Would you have a better recommendation?
Hi Antonio S., I noticed your profile in a project similar that we are interested. We are looking to capture the MAC Address of the phones. I would like to know which device do you recommend for that and what more info we can get from it. The Budget is symbolical. I have a few more questions, please let me know if you are interested.
Hi There I need 2 packet tracer labs to be created to demonstrate the benefit of subnetting to a client of mine the , a packet sniffer app can also be used to illustrate the benefits as well, below are the required heading the jib can be recorded and sent to me with typed out or narrated instruction Improve network performance and speed Reduce network congestion Reduce network congestion Control network growth Ease administration
...Mobile HW used). Functional features.. Conformance Check for RAIN & other protocols via Link Timing, Physical layer, RF envelope data break up display with time stamp. Identify any Comm issues and RF signal analysis with QoS. Following 3 modes desired. Save the time-stamped log in all cases. Output data to PC host editable. Output signal strength adjustable. 1. Reader - send and receive RFID supported standard protocol messages. Manual trigger or auto poll. RSSI, and 5 additional read variables to send to host. Message time of flight. 2. Tag - Send the ID, memory bank data, simulated 5 variables to send to reader. All data editable via mobile app. 3. Sniffer/Spy/listener - It should discover the RFID readers and tags in its vicinity and trap...
Hi Mohammad Suman K., I noticed your profile. Are you by any means interested in creating a packet radar that displays player location, player aim direction, player health. Weapon locations, Weapon Availability, weapon spawn timers all on a birdseye view of 2d maps on each multiplayer map in real time?
Hi Mohammad Suman K., I noticed your profile. Are you by any means interested in creating a packet radar that displays player location, player aim direction, player health. Weapon locations, Weapon Availability, weapon spawn timers all on a birdseye view of 2d maps on each multiplayer map in real time?
...(cross platform). Store the message x-sactions history with timestamps in local DB. Provide a user-friendly UI. Functional features.. Following 3 modes desired. 1. Reader - send and receive RFID supported standard protocol messages. Manual trigger or auto poll. RSSI, and 5 additional variables to send to host. Message time of flight. 2. Tag - Send the ID, memory bank data, simulated 5 variables to reader. 3. Sniffer/Spy/listener - It should discover the RFID readers and tags in its vicinity and trap RFID messages in the air from any readers or tags discovered. Report the timestamp and origin of the message when trapped. Determine RSSI of each message and append up to 5 additional parameters & send These messages to its host via port in use. The implementatio...
I need you to develop some software for me. I would like this software to be developed for Windows using .NET. program sniffing my bittorent client and show me peers ip and client software name.
...wireshark, charles, httpdebugger, fiddler etc. is active and monitoring the network. I would need the python script to be using asyncio and i would like the script to be a real time checker so that whenever a script is running it will check throughout without interrupting the execution of the main script. Basically the flow will be: 1. Main python script will include the anti network interceptor(sniffer or proxy program) 2. Whenever the Main script is running the anti network interceptor will run continuously and check for programs that is monitoring the network. 3. If the anti network interceptor detects that such program is running. It will instantly quit the Main python script. 4. Unless there is no more network interceptor or proxy sniffing tool is opened or running. Then...
...company logo, we would essentially like to have a very similar style/font as the attached but instead of a dog we would like a Lizard character incorporated into the letter "N" in the "sniff" of "Lizardsniffer" (one word). Instead of a bone over the letter "I" we would like a dragonfly. Ideally the full lettermark logo will say "Lizardsniffer Studios" with "Lizard" being a different color than "sniffer". In the animated logo video... the dragon fly will be flying around in circles with the Lizard patiently watching it... then the Lizard will react by shooting out his tongue and eating the dragonfly -- thereby ending the animation and cutting back to the still lettermark logo. For the small graphic we would like...
Hi Ahmed M., I noticed your project bidding(https://www.freelancer.com/projects/fpga/USB-data-sniffer/details) and would like to offer you my project. We can discuss any details over chat. Thank you.
Hi Marc Shane S., I noticed your project bidding(https://www.freelancer.com/projects/microcontroller/usb-sniffer-using-stm/?ngsw-bypass=&w=f) and would like to offer you my project. We can discuss any details over chat. Thank you.
Hello, i am looking for Linux ssh backdoor, collect all good login username/password and login with other password on login root!
Need to develop WordPress plugin for GlassDoor using PHP OOPS concept and name spaces as per PHP code sniffer standard and Gutenberg block (in reactjs) to show the api values on page. Plugin will be configurable in admin to enter api key and password
...emulated, approved transaction) payment process. The NFC capture equipment used may be a) an Android phone with NFC sniffer App, b) a Proxmark NFC sniffer e.g. c) Other similar NFC hardware sniffer The state diagram must show the data transactions from card, from the phone/watch and from terminal, at each step. At least 2 sequential transactions must be shown. This is not a high-level simplified block diagram, values like the PAN, CVV1, CVV3 must be shown The flow must cite the specifics values exchanged to backup the steps/data The report much include the original Contactless NFC enabled credit/debit card a) Visa PayWave & MasterCard
Write a Python packet sniffer for Linux. Must have knowledge of raw sockets in Linux. Attached file needs to be fixed or redone. Program must also have a save to file option after data is captured.
Combine common sensor technology - Smoke detector, Cirarette smoke, Noise dB level, Humidity, Wifi Sniffer only to count mobile phones in an area. Off the shelh components. Work with China based mfg of the smoke detector technology, where their understanding of tuning for multiple kinds of smake and manufacturing ability is valauable, to develop a circuit board. Global IOT project for hospitality industry. Established US based enterprise software company new business start-up.
1. сниффер аппаратно на базе Atmega644PA + ESP32-WROVER-IB + SIM800L + питание от аккумулятора, который продлит работу устройства на +-24 часа в случае отключения автомата. Батарея должна питать wifi и gsm. Зажатием кнопки чтобы можно было полностью выключить/включить (при подаче питания от mdb автоматически включается) + модуль времени типа DS1307, чтобы периодически через интернет можно было получать точное время и затем использовать его в чеках (например, когда офлайн); прототип в виде готового к использованию устройства в корпусе, разъем для подключения дисплея TZT TFT дисплей 0,96/1,3 дюйма IPS 7P SPI HD 65K полноцветный ЖК-модуль ST7735 Drive IC 80*160 (не OLED) для Arduino, сам дисплей отдельно (входит в комплект прототипа) 1.1. прошивка атмеги - чистый C, среда - Atmel Studio 7.0 ...
We need a network packet sniffer that can capture and parse the incoming traffic. Requirement: 1. This sniffer must work with Windows for both 64bit and 32bit machines. 2. This sniffer could filter traffic from all kinds of sources (HTTP/HTTPS/FTP/etc) 3. This sniffer will not disturb the normal flow of web traffic and other services of the computer 4. This sniffer could be used together with company proxy 5. This sniffer should not miss or drop packets 6. The output of this sniffer should be a text file with string-type packet details. For example, packet header information (source IP, website name, timestamp) and payload information (human-readable string) 7. Written in Java 8. We need the source code with a succinct but complete explanat...
I need ESP32 (arduino) code that implements simple MDB sniffer. I must sniff coin acceptor and bill validator data to get information on how much money was inserted into vending machine. I also need to know when user presses VEND on vending machine and how much money the selection costs and what article is selected. Please DO NOT BID if you dont have vending machine to test your code.
help to capture GATT protocol on the BLE smart bulb using adafruit nRF usb
I need a packet-based radar that sniffs TCP/UDP packets from PUBGM, decrypts them, locates players and other information, and displays them. It runs externally, sniffing only packets and not modifying memory. I need full source code ( C#, Python, JS, every language is fine ) and long term collaborations to keep the project updated English only communications.
I want to build a sniffer fir rfid and nfc all data distance 20 feet using phone radio antenna wave . It's safe to use it and it's for educational purposes
Hello, so I am trying to learn how to extract API request data from an android APK. Im looking for someone to make a short video tutorial explaining how to do this. I know how to use APKtool and I have android studio and I can do this on android apps using rooted nox player and traffic sniffer but there are apps that wont run if traffic sniffer is on or if it detects a rooted device. I need to go directly to the source and get request data.
We are looking for someone to build a GSM data Receiver (contactless EMV Skimm3r sniffer, read and clone all kind of c/d-cards that gets track 1,2 also Software Should d3crypt the GSM data traffic coming from P0S systems, and separate the P0S info from the other traffic the receiver picks up. please message if you could do this projectS
Hello, do you work with AutoHokey and Python? How much for a simple packet sniffer that shows data from an MMO? I want to parse chat logs/ combat logs. tshark integration in python/autohotkey
