Basic 3D Architectural AutoCAD Drawings

I'm in need of a few AutoCAD drawings focused on basic 3D architectural massing. The project will involve: - Using AutoCAD to produce detailed, layerable 3D model Ideal candidates for this project should possess: - Proficiency in AutoCAD with a focus on architectural design - Experience in creating 3D massing models I would need you to build the model described in the below step by step directions. Beforehand, you would please confirm whether the directions provided are complete enough to draw a structure/shape. In case this is not complete, please inform what is missing so i can gather the remaining informations. Step by step directions: Set up the working environment: Launch AutoCAD and create a new drawing. Type "UNITS" in the command line and set units to Meters. Create the circular base: Type "CIRCLE" and create a circle with a radius of 5 meters at point (0,0,0). Draw the inscribed pentagon: Use the "POLYGON" command to create a pentagon inscribed in the circle. Create the main parabolic arc: Type "3DPOLY" to start a 3D polyline. Click on a point on the base circle, then at the center at a height of 3.09m (0,0,3.09), and finally on the opposite point of the circle. Use the "PEDIT" command to convert this polyline into a smooth arc. Generate the 24 main arcs: Use the "ARRAY" command with the Polar option to copy the arc 24 times around the center. Create the Fibonacci spiral: Use the "HELIX" command to create a spiral. Adjust its parameters to follow the Fibonacci sequence. Add secondary arcs: Create thinner arcs between the main arcs using "3DPOLY" and "PEDIT". Add horizontal rings: Use the "CIRCLE" command at different heights, following the Fibonacci sequence. Use "INTERSECT" to create intersections with vertical arcs. Create the top and skylight: At the summit, use "CIRCLE" to create the top ring. Use "SUBTRACT" to create the skylight opening. Model the bamboo elements: Use the "SWEEP" command to create tubes along the arcs, representing bamboo. Adjust the diameter for main arcs (10cm) and secondary arcs (5-7cm). Create the cross-section view: Use the "SECTION" command to create a cross-section of the dome. Add textures and materials: Use the materials palette to apply a bamboo texture to the elements. Set up lighting and rendering: Use the "RENDER" command to create a realistic render of your model. Create views and layouts: Use "VIEWPORTS" to create different views of your model (plan, elevation, perspective). Add dimensions and annotations: Use 3D dimensioning commands to add precise measurements.