Filtro

Mis búsquedas recientes
  • rtos barkley
  • vbulletin custom page php
  • php save xml feed file
  • moodle features and benefits
Filtrar por:
Presupuesto
a
a
a
Tipo
Habilidades
Idiomas
Estado del trabajo
648 rtos barkley trabajos encontrados

...ko-development-kit. • The project will implement the RTOS () on the development board and the application will run on top of that. • The application will take data from The best sensor for demonstration purposes is probably the iCog-Ls.1. • The data from the iCog sensor will be transmitted over LoRa using the AM094 (). • All hardware will be supplied • A test system based on a Raspberry Pi will receive the data and display it. If you have any questions, please get back to me. I think the LoRa is the tough part so is the following acceptable? 1- Free RTOS 2- Read iCog 3- LoRa I want it to be done in these

$210 Average bid
$210 Oferta promedio
8 ofertas

We are working on ATMega 2560 , We need UART interrupt schedule. which will execute automatically when there is data on serial port.

$39 Average bid
$39 Oferta promedio
10 ofertas
freeRtos project
Finalizado left

Create 3 tasks in free RTOS Task 1 (highest priority) monitors a parking lot in the Park. It generates random coordinates (x,y) of a car and uses the Euclidean distance and period to calculate the speed of the car (output). If the speed is above 10 (to simulate 10 mph), a warning is generated.  Task 2 (medium priority) simulates an occupancy monitoring system for a room-eg:say a library room. Each time (simulates one hour) a random value between 20 and 50, representing the number of students in a library room, is generated. Task 2 calculates the accumulated sum, average, maximum and minimum number of students as output, and clears the statistics after every 24 readings (i.e., one day).  Task 3 (lowest priority) records the power and energy consumption of the Park. A power reading ...

$94 Average bid
$94 Oferta promedio
9 ofertas
Write some Software
Finalizado left

Code in c++11 medical equipment, unit test, design document, RTOS, find the issues in hardware and software

$472 Average bid
$472 Oferta promedio
15 ofertas

...simple solution would be a RTOS or more real time kernel. NOTE: There has been reports of crosstalk on the Pi3 GPIOs when being pushed too quickly. QUESTION: How can we tell the difference between the scheduler causing a slowness issue or crosstalk on the GPIOs from being pushed too quickly? This could be a critical test to confirm things are stable. I want to discuss ideas and options to allow a more real time processing and sampling of the GPIOs. Once discussed and all my questions answered you will be paid in full. We can also discuss other related work (RTOS / edit kernel) which would be paid separately under a separate project. Things I have found that could help: Force Linux to be more RTOS. Might not be 100% RTOS but if it makes thi...

$160 Average bid
$160 Oferta promedio
11 ofertas

This is an industrial based project . here we have to make firmware for new devices project duration : 5-10 months project budget : 3000$ - 15000$ Skills : Embedded firmware engg with c programming / rtos / I2C . How to get this project : 1. project understanding between freelancer and us 2. knowledge screening by an SKYPE interview 3. Payment option : advance 50 % after 40 % of work done rest 50% About us : We are a startup who is working for some US based client . We are working since 2012 . More details will be shared after awarding the projects . Prerequisites : Make sure first conversation will be made with technical person or the developer . Money may not be an issue for right design and person . Should have knowledge on embedde...

$4392 Average bid
$4392 Oferta promedio
13 ofertas

hi if you are able to install the symbian OS onto the armv5 chipset please contact us we are looking for a experienced programmer who has some knowledge in the field to work with us and implament the OS system into a armv5 chipset that will be used by a phone

$2573 Average bid
$2573 Oferta promedio
5 ofertas

This is the last time I will be posting this project to seek a solution, my offer is 3000$ to whoever can complete We want an operating system we can successfully edit and install oklnto a feature phone , they commonly have mediatek chips which has there own SDK and so on , but we would like absolutely any operating system that we can install on to ant of these models .. Nokia 105 .. Samsung e1200

$2645 Average bid
$2645 Oferta promedio
16 ofertas

I am looking for a freelancer to help me with my project.I have designed an embedded device which detects the finger print. It needs a device driver to run thus I need a developer who can develop the device driver for the same also have good knowledge in embedded / Rtos / kernel/ device driver system development.

$59 Average bid
$59 Oferta promedio
4 ofertas

Hi philonidhi2000,i am wrking on embedded systems ...i have hands on exp on RTOS arduino and stm controllers etc...u given a bid 6600 how it should be possible

$196 - $196
$196 - $196
0 ofertas
embedded
Finalizado left

embedded development on baremetal and RTOS based like embedded linux

$16 / hr Average bid
$16 / hr Oferta promedio
21 ofertas

We need a way for reading/writing files on a FAT32 SD card with the CC1310 microprocessor from Texas Instruments (on SmartRF06 evaluation board). This involves the development of a diver called "SDSPI" that is between the FatFs library and the low level spi communication.

$622 Average bid
$622 Oferta promedio
3 ofertas

...microcontroller and writing firmware for embedded system . 6- Must have prior experience with Low power device (sensor) running on lithium Battery. The ideal candidate should be proficient at Embedded C programming and like peripherals I2C, UART, GSM, GPS, USB, WiFi, Accelerometer, SPI and also ChibiOS as the RTOS. The role/project includes - Code collaboration, contribution (BitBucket) and discussions (primarily C,C++) - Schematic design - PCB design - ChibiOS (RTOS) - uGFX Sensors/Components used in project: - MCU - GPS - Barometer - Temperature - Humidity - UV light - Accelerometer - Gyroscope - Micro SD - 3G/4G - WiFi as client and AP - Multiple pollutant Gas sensors - Power Management unit which is inclusive of super capacitor th...

$783 Average bid
$783 Oferta promedio
21 ofertas
final grade calculator
Finalizado left

Requirements: I. The system shall ingest (see next page). This comma delimited input text file contains the names and grades of 30 students. Each student has grades for six assignments: 3 Homework Assignments, 1 Midterm, 1 Pr...Scottie Pippen,88,75,70,90,94,96 Allen Iverson,85,80,69,91,75,86 Tim Hardaway,100,0,75,65,95,89 Kevin Garnett,89,56,91,88,79,73 Kyrie Irving,75,64,89,70,90,82 Vince Carter,91,89,76,64,0,70 Tracy McGrady,88,76,54,61,91,79 Larry Bird,0,86,100,96,84,88 Magic Johnson,87,80,70,66,77,91 Chris Mullin,99,87,94,0,86,84 John Stockton,89,91,96,88,85,80 David Robinson,65,56,88,46,77,90 Charles Barkley,78,60,89,79,35,0 Derrick Rose,94,78,90,86,80,88 Dwayne Wade,90,56,86,70,62,30 Carmelo Anthony,60,0,50,84,46,92 Ray Allen,97,64,95,75,88,89

$36 Average bid
$36 Oferta promedio
11 ofertas

Open to US residents only due to contract requirements. Preferably in Texas but will consider all US. I have a very short schedule for this as I will need working code by or before the middle of May 2017. I will not have time for a...STM32 System bench or Keil uVision 5 (least favorible) as the development platform. I prefer an open/free development platform as some of this code will ultimately be released as part of an open source project. CooCox not acceptable. All IO and pinouts have been configured in STM32Cube for IO code initialization. It is not mandatory to use this and the ST HAL libraries but is preferred. An RTOS is optional. Some signals will need to be interrupt driven due to some safety controls implemented. Please provide or link to relevant examples of previ...

$38 / hr Average bid
$38 / hr Oferta promedio
3 ofertas
AvR Free Rtos
Finalizado left

make a general purpose RTOS for AVR series controller... in this project I was make rtos for AtMega328p controller for custom board..

$16 / hr Average bid
$16 / hr Oferta promedio
8 ofertas

Familiarity with TI Tiva and MSP430. TI-RTOS. Nordic nRF52. LCD display, CAN Bus/NMEA 2000, Bluetooth, IOS.

$4754 Average bid
$4754 Oferta promedio
7 ofertas

I need an electronics engineer with advanced English speaking and at least a year of experience with BLE for TI-RTOS. -Bluetooth Low Power -TI-RTOS -Code Composer Studio Ability to explain simple tasks as: -Implementing a Peripheral and a Central -Implementing debugging tools like logs -Explain main communication flow using ICall, GAP, GATT. -Messages and Events, their processing and iterations. -Provide simple communication example between Server and Client and explain it. You will need TI BLE devices(2) and software. If you have what it is requested please make an offer, explain why should I hire you and how many hours you'll need.

$416 Average bid
$416 Oferta promedio
2 ofertas

I need an electronics engineer with advanced English speaking and at least a year of experience with BLE for TI-RTOS. -Bluetooth Low Power -TI-RTOS -Code Composer Studio Ability to explain simple tasks as: -Implementing a Peripheral and a Central -Implementing debugging tools like logs -Explain main communication flow using ICall, GAP, GATT. -Messages and Events, their processing and iterations. -Provide simple communication example between Server and Client and explain it. You will need TI BLE devices(2) and software. If you have what it is requested please make an offer, explain why should I hire you and how many hours you'll need.

$100 - $300
$100 - $300
0 ofertas

...in testing any software you deliver. We do not have JTAG, but do have UART-based debugging functionality on the device. A successful project will deliver a drop-in module that allows us to use a compile-time flag to change configurations between the ADC-based accelerometer and the MPU-6050 device. When designing a driver, memory optimization is critical, as we have limited stack space in our RTOS implementation. To complete the project with full release of funds, the code must successfully function in our existing software (which will be provided). There is sample code for the LPC2129 i2c peripheral available, as well as demonstration code using the MPU6050 with Arduinos and mBed processors. This task should not be difficult for a developer familiar with i2c, but we simpl...

$10 - $30
$10 - $30
0 ofertas

We are after an engineer that has had experience in writing embedded software for a single ethernet port modem gateway router using the Telit HE910 3G modem. The product MUST: Use Telit HE910 connected to the USB CDC interface(s) Ethernet port Must be RToS based (FreeRToS, MQX, uTasker etc), NOT LINUX Must be C code, written with exception handling and documented. Only requires low level development (application level will be completed by myself) Preferably use Freescale / NXP processors such as Kinteis arm processors, but MUST be low cost processor with no external memory, processor must be under USD$10 Be capable of through put of HSUPA speeds (20Mbs through put) Must support all general internet traffic i.e. The Ethernet port could be connected in any home network for ...

$5142 Average bid
$5142 Oferta promedio
2 ofertas

...in testing any software you deliver. We do not have JTAG, but do have UART-based debugging functionality on the device. A successful project will deliver a drop-in module that allows us to use a compile-time flag to change configurations between the ADC-based accelerometer and the MPU-6050 device. When designing a driver, memory optimization is critical, as we have limited stack space in our RTOS implementation. To complete the project with full release of funds, the code must successfully function in our existing software (which will be provided). There is sample code for the LPC2129 i2c peripheral available, as well as demonstration code using the MPU6050 with Arduinos and mBed processors. This task should not be difficult for a developer familiar with i2c, but we simpl...

$496 Average bid
$496 Oferta promedio
11 ofertas

...Accessories - Packs - Contact - Quote form FEATURES: - Responsive - LiveChat to be integrated (will supply details) - Quote request function - Contact form COPY AND CONTENT: Will supply images and copy USE OF AN EXISTING THEME: Happy to use an existing theme so long as developer and I agree on it. BUDGET: - 100AUD inc. a basic logo TARGET BRANDS: - training companies/RTOS - large brands that deliver in-house training - companies where this is an appropriate sign up promotional item If you cannot bid within this amount $100 (AUD!!!) do not bid at all ...

$111 Average bid
$111 Oferta promedio
38 ofertas

We need to create an automatic tester for our new product. Our product will plug into a STM32F7 Discovery kit () and we want someone to write C code on this kit to test every feature of our product. I have attached a datasheet for our product that you would be testing. Experience writing C code on an RTOS for ST Micro STM32 processors is required.

$187 Average bid
$187 Oferta promedio
8 ofertas

We are developing a new board that has an Altera MAX10 FPGA running an RTOS on Altera's soft-core processor NIOS. We're looking for someone who has experience building an Altera FPGA project and writing code on top of NIOS. Some RTOS experience preferred.

$23 / hr Average bid
$23 / hr Oferta promedio
10 ofertas

Hello all bidders, I have a project with raspberry pi 3. I have RB3 (NOOB RTOS) + RBP camera. I want to use its camera view into Unity3D. Project is very simple. No more thing required, just take the video on RBP into Unity3Ds. I will write some code on it. Waiting for your bids!

$383 Average bid
$383 Oferta promedio
2 ofertas
Mobile development
Finalizado left

Developent of a Nucleus Rtos customized app and interface for a Nucleus OS based device

$1280 Average bid
$1280 Oferta promedio
37 ofertas
API in μC/OS
Finalizado left

Design and implement a datacentric programming interface, where users don't need to know how to create and execute tasks on RTOS (a layer of abstraction). Users only provide metadata (information) of their data, such as data source, data type (and range), data format, data arrival rate (or device sampling rate) ... and some functions, such as data pre-processing, post-processing and data analysis and operations. Your interface/lib will create periodic tasks to process user data.  Define data structures for the meta-data and callbacks, and implement functions to connect/disconnect input/output data streams (which creates and manages the execution of tasks to process user data).

$840 Average bid
$840 Oferta promedio
2 ofertas

Design and implement a datacentric programming interface, where users don't need to know how to create and execute tasks on RTOS (a layer of abstraction). Users only provide metadata (information) of their data, such as data source, data type (and range), data format, data arrival rate (or device sampling rate) ... and some functions, such as data pre-processing, post-processing and data analysis and operations. Your interface/lib will create periodic tasks to process user data.  Define data structures for the meta-data and callbacks, and implement functions to connect/disconnect input/output data streams (which creates and manages the execution of tasks to process user data). By using your data-centric programming interface solve the below tasks: ...

$200 Average bid
$200 Oferta promedio
1 ofertas
Data API in μC/OS
Finalizado left

The current μC/OS-III is task-centric instead of data oriented. Design and implement a datacentric programming interface, where users don't need to know how to create and execute tasks on RTOS (a layer of abstraction). Users only provide metadata (information) of their data, such as data source, data type (and range), data format, data arrival rate (or device sampling rate) ... and some functions, such as data pre-processing, post-processing and data analysis and operations. Your interface/lib will create periodic tasks to process user data.  Define data structures for the meta-data and callbacks, and implement functions to connect/disconnect input/output data streams (which creates and manages the execution of tasks to process user data). By using your data-cen...

$10 - $30
$10 - $30
0 ofertas
write a code
Finalizado left

. Data API in μC/OS The current μC/OS-III is task-centric instead of data oriented. Design and implement a datacentric programming interface, where users don't need to know how to create and execute tasks on RTOS (a layer of abstraction). Users only provide metadata (information) of their data, such as data source, data type (and range), data format, data arrival rate (or device sampling rate) ... and some functions, such as data pre-processing, post-processing and data analysis and operations. Your interface/lib will create periodic tasks to process user data.  Define data structures for the meta-data and callbacks, and implement functions to connect/disconnect input/output data streams (which creates and manages the execution of tasks to process user data). ...

$25 Average bid
$25 Oferta promedio
1 ofertas
write a code
Finalizado left

. Data API in μC/OS The current μC/OS-III is task-centric instead of data oriented. Design and implement a datacentric programming interface, where users don't need to know how to create and execute tasks on RTOS (a layer of abstraction). Users only provide metadata (information) of their data, such as data source, data type (and range), data format, data arrival rate (or device sampling rate) ... and some functions, such as data pre-processing, post-processing and data analysis and operations. Your interface/lib will create periodic tasks to process user data.  Define data structures for the meta-data and callbacks, and implement functions to connect/disconnect input/output data streams (which creates and manages the execution of tasks to process user data). ...

$23 Average bid
$23 Oferta promedio
3 ofertas

I need you to develop some software for me. I would like this software to be developed for Linux/RTOS using C or C++. Here is the development condition - 1. Platform / ARM926 CPU 2. Function - TCP/IP and networking protocol, image and video display and work with mobile device and cloud server

$2891 Average bid
$2891 Oferta promedio
10 ofertas
Programming C
Finalizado left

We are looking for an experienced developers for long term cooperation. Good knowledge about C is a must, an experience with RTOS and GitHub is welcome.

$16 / hr Average bid
$16 / hr Oferta promedio
26 ofertas
Write some Software
Finalizado left

...the arrival times of jobs of the three tasks and check if there is any pattern. b.) Task 1 reads random (x,y) coordinates from a file, while Task 2 and Task 3 still generate random sensor readings in memory. Simulate their execution and measure the average response time of each task. Compare the results from a.) and b.) . liks related to software required for it are below : μC/OS-III RTOS: For emulations on Windows Visual Studio, download code at μC/OS licensing information:

$10 - $30
$10 - $30
0 ofertas

...technology, as well as support customers and third parties in the design of NFC based devices.<br /><br />Required Skills and Experience:<ul><li>Master’s Degree in Electronics engineering, Computer Science, Telecommunications, or similar.</li><li>3-5 years of recent relevant experience in software/firmware development.</li><li>Deep understanding of real-time system basics and solid experience with RTOS.</li><li>Experience with HW/SW interactions and modern development tool-chains (gnu, arm,…).</li><li>Excellent level of English language, both written and spoken.</li><li>Proven ability to work both independently and in a team environment with co-operative ...

$244 Average bid
$244 Oferta promedio
1 ofertas

...ability to work both independently and in a team environment with co-operative attitude, and handle multiple high priority tasks during peak product cycles.</li><li>Clear and confident communicator. Self-motivation and discipline. Result oriented</li></ul><br /><strong>Additional valuable skills:</strong><ul><li>Experience with contactless and NFC technology hardware design.</li><li>Experience with RTOS and Linux based C/C++ development.</li><li>Practical experience with other wireless communication technologies such as experience for conformity marking for electronic devices (CE/FCC).</li><li>Understanding of cryptography and security for embedded systems. </li&...

$244 Average bid
$244 Oferta promedio
2 ofertas

We have an embedded system project starting immediately that will last 3 months+ programming a Cortex processor for a telecoms device with RTOS. The project is suitable for an experienced embedded systems programmer based in the south east of the UK.

$272 Average bid
$272 Oferta promedio
3 ofertas

Write full example for ESP8266 using Visual Studio 2015 and VisualGDB. Example should take ADC sample at 8KHz at send them via UDP. Should use Espressif RTOS SDK.

$666 Average bid
$666 Oferta promedio
6 ofertas

We are looking for a Freelancer who is is located in Hyderabad to write required firmware for enhancement in RTOS on LCP1768 Micro-controller. We are looking to have the freelancer to complete the enhancements and code cleanup for 2 full working weeks.

$276 Average bid
$276 Oferta promedio
4 ofertas

iMotion Software is an Italian software house, focused on development of IoT, data logging and remote monitoring solutions. We already have a custom ESP8266 firmware, based on RTOS SDK version 1.4 with a web interface that relies on libesphttpd library. Firmware collects data from analog and digital inputs and sends them to our cloud platform CloudMonitor24. Web interface has the goal to collect settings from the user. We have to develop some changes to the current firmware, all related to the web interface: 1. Refactoring of session management on web interface. It’s now based on IP address to authorize a session but must be replaced with a standard cookie session (it’s ok to have a circular buffer with valid sessions in memory). 2. Add a new page on web in...

$586 Average bid
$586 Oferta promedio
12 ofertas

Radiato embedded system is innovative and have passion to do something new. We are dedicated to provide our best to clients and our society. An embedded system is a computer system with a dedicated function within a larger mechanical or electrical system, often withreal-time computing constraints. It is embedded as part of a complete device often including hardware and mechanical parts. Embedded systems control many devices in common use today.Ninety-eight percent of all microprocessors are manufactured as components of embedded systems.

$25 Average bid
$25 Oferta promedio
5 ofertas
Report Writing
Finalizado left

Want to write Report on RTOS upto 20 pages.

$17 Average bid
$17 Oferta promedio
2 ofertas
STM32 drivers
Finalizado left

...project is for communication system that we will define. We need to following software: 1. bootstrap code, 2. interrupt handler 3. sleep / wakeup time management 4. LoRa module driver (can try to use the Open LoRa code) Bottom line for initial phase is to be able to be able to configure the radio with the required setting, and send / receive messages between two sets. to consider: - using RTOS for the STM32W After this phase we can consider the next steps of this project. Please advise: - previous experience you have with SMT32 and especially with this kit - previous experience with LoRa (if any) and what chip-set was used. - do you have any of the relevant hardware or do we need to provide it to you - other relevant experience - how do you suggest to proce...

$1220 Average bid
$1220 Oferta promedio
7 ofertas

We are look...be delivered. The work will be divided into a series of individual project deliverables. Would be good if you bring: - knowledge in Atmel SAM(C) and SAM(E) Microcontrollers - knowledge in Atmel Studio and its ASF library - experience using direct memory access (DMA) - knowledge of bootloader development - knowledge of interfacing with external flash (eMMC) - knowledge of TCP/IP without RTOS (perhaps lwIP) - knowledge of the use of communications busses such as CAN - knowledge in setting up repository (like github) Would be good if you can start immediately and we would like to have regular communication over Google Hangouts for the duration of the projects. A pre-project call will be important to discuss the requirements and to ensure this is a good fit. ...

$12 / hr Average bid
$12 / hr Oferta promedio
16 ofertas

iMotion Software is an Italian software house, focused on development of IoT, data logging and remote monitoring solutions. We already have a custom ESP8266 firmware, based on RTOS SDK version 1.4. Firmware collects data from analog and digital inputs and sends them to our cloud platform CloudMonitor24. We need to develop a new functionality on the current firmware version: integrate libesphttpd library and create a small web interface composed by 2 pages: - A login page that should authenticate the current user - A configuration page that collects from the user few parameters (SSID, passphrase and cloud credentials) and store them locally. We can provide to the developer full HTML and all static assets (CSS, images and JS) required for the 2 pages. This is a first ...

$590 Average bid
$590 Oferta promedio
11 ofertas

We have a custom STM32F4 board with an XPORT connected to the serial port. We are looking for an engineer who can program an FTP server which uses a SD card for datastorage and also a HTML webserver to interface with a browser. We don't want to use an RTOS. For the SD card we want to have the interface done by SPI and FATFS (already available can be reused). The critical part is that the interface is USART and not Ethernet. The final product must be able to show a webpage stored on a SD card which can be changed by FTP.

$751 Average bid
$751 Oferta promedio
7 ofertas

This project is to refine existing firmware for a battery operated embedded device. This project is primarily to quickly and efficiently debug and optimize the code. The device is based on the ARM architecture and we use Free RTOS as our operating system. The device has a cmos camera, IR camera along with bluetooth, wifi and zwave wireless radios. The device also has voip capability so some experience with that would be a plus. The device connects to both PC's and smart phones. Our hardware includes the ST Micro ST32 and we use the TI BLT/WIFI chipset. This project has milestones but many new ones will be created as the project progresses into achieving customer requirements.

$26 / hr Average bid
Destacado Urgente Acuerdo de Confidencialidad
$26 / hr Oferta promedio
11 ofertas

Basically in this project we focused on the scheduler for the operating system,operating system is nothing but a real time manner,so as per our algorithm the scheduler what we design is schedule the task as per the priority of that particular task and we assign the the unique priority for each task and after completed the hole development we port the software into the arm board and we also design the some tool chain for the arm board.

$8 / hr Average bid
$8 / hr Oferta promedio
2 ofertas

We are looking for a developer to work on hardware/firmware project which includes the following: 1. Work on existing hardware and enhance firmware or add functions 2. Develop hardware where necessary 3. e...enhance firmware or add functions 2. Develop hardware where necessary 3. experience with peripherals such as Wi-Fi, cell, GPS, sensors, CAN Bus, graphic LCD, flash memory 4. Provide fully validated product. Our requirements are clearly defined and we provide necessary hardware and test set up. 5. We expect you have development environment for ARM platform. 6. 5+ years of hands on experience with RTOS and WEC7 (requires VS2008) 7. End to end product development experience (Our products are connected to web applications and bi-directional communication is the used usin...

$2625 Average bid
$2625 Oferta promedio
10 ofertas