Sensors and actuators in iot jobs

...receive pressure measurement from 3 Piezoelectric sensors via Bluetooth interface - microprocessor to trigger vibrations in one or more motors via Bluetooth interface corresponding to the sensors which are measuring pressure below threshold values & stop vibration when pressure comes within threshold value - Programming in C/C++ & deployment of same in ESP32 microprocessor for continuous monitoring of input pressure & triggering or stopping vibration immediately - Optimize the design for long battery life to ensure continuous usage without frequent charging. Ideal Skills and Experience: - Proficiency in working with ESP32 or similar microprocessor - Extensive experience in C/C++ programming - Knowledge and exp...

...automated solar tracking system that uses GPS and IMU to optimize the orientation of solar panels for maximum energy capture throughout the day. Key Requirements: - The system needs to be completely automated, requiring no manual adjustments. - It should be capable of tracking the sun's path and adjusting the panels accordingly to capture the most sunlight possible. - Integration of GPS and IMU is a must. Key Components 1. GPS Module: Provides the vehicle's geographic location (latitude, longitude, and altitude). Determines the local time, date, and solar position (azimuth and elevation) based on the location. 2. IMU (Inertial Measurement Unit): Measures the ...

I'm in need of an expert with a solid understanding of both GPS tracking and the Wialon/Flespi platforms. The main objectives are to achieve real-time tracking, monitor temperature with the ability to create alerts and charts for easy display to customers. Key Responsibilities: - Integrating GPS tracking systems with vehicles and temperature sensors. - Setting up and configuring the Wialon and Flespi platforms for optimal tracking and analysis. - Ensuring real-time tracking capabilities are functioning correctly. Ideal Skills & Experience: - Extensive experience with Wialon, Flespi and Teltonika. - Proficient in GPS tracking technologies. - Prior experience integrating vehicles and temperature...

...Node-Red to receive and process data from pump sensors. - Establish a seamless integration with Unity for real-time data visualization. - Create detailed documentation for the Node-Red and Unity setup. - Develop error handling mechanisms for data inconsistencies. - Implement security protocols to protect sensor data. - Test the integration between Node-Red and Unity thoroughly before deployment. - Design and implement a user-friendly interface for data visualization. - Set up a system for storing historical sensor data. Ideal Skills: - Proficiency in Node-Red and Unity. - Experience in real-time data visualization. - Understanding and experience with sensor data integration. This project is perfect for someone who can com...

Global Partnership Opportunity: Smart Education Solutions Provider Seeking Asia-Pacific Distributors As a leading Chinese smart education manufacturer with integrated R&D and manufacturing capabilities, we specialize in providing turnkey solutions including interactive whiteboards, educational software, and IoT-enabled classroom systems. With 12 years of OEM/ODM experience serving 30+ countries, we now seek strategic partners to expand in Asia-Pacific education markets. Our Competitive Edge ✓ Vertical Integration Full-stack production from SMT assembly to software development ✓ Export-Ready Solutions CE/FCC/RoHS certifications for global markets ✓ Customization SDK/API integration for localized curriculum adaptation ✓ Logistics Network Efficient expor...

Please Sign Up or Login to see details.

...assist in creating a virtual reality (VR) training game focused on cybersecurity awareness and best practices for healthcare professionals. The project is funded under a DELTA grant and aims to enhance cybersecurity education through immersive, scenario-based learning experiences. Project Scope The game will simulate real-world cybersecurity threats and scenarios that healthcare professionals face, providing interactive training in a realistic hospital environment. The VR training will cover topics such as: Phishing and social engineering attacks targeting healthcare staff. Data breaches and handling protected health information (PHI) under HIPAA compliance. Ransomware attacks and incident response protocols in a hospital ...

...using the ESP IDF. The code is approximately 60% complete. I need a programmer to complete the code, fix the errors and ensure the module works as intended. The code is for 3 different applications: 1) Line follower 2) RC Bluetooth Control Key Aspects of the Job: - Error Fixing: The majority of the work will revolve around diagnosing and fixing issues in the existing code. - Code Completion: You'll need to finish the remaining segments of code. - Schematic Reference: I have schematics of the module I've designed for your reference,will be provided via chat. The code needs to interface with several hardware components, including: - Infrared Sensors - Ultrasonic Sensors - Motors and Drivers -Bluetooth control from mobile phone. More...

I'm seeking an expert in circuit board design for a radio intended for industrial equipment. The circuit board should incorporate wireless connectivity and sensor integration. Key Requirements: - Design a circuit board tailored for industrial-grade radio - Incorporate wireless connectivity - Integrate sensors into the design Ideal Skills and Experience: - Proven experience in circuit board design, particularly for industrial applications - Strong background in wireless connectivity and sensor integration - Ability to deliver a robust and reliable design suitable for industrial use

I'm looking for a skilled freelancer to help me with the setup of ThingsBoard and the configuration of multiple sensors on the platform. This is a key project for our smart solution deployment. Tasks include: - Installing and configuring ThingsBoard - Setting up default dashboards - Configuring a minimum of 10 devices (specifically Temperature, Humidity, and Motion sensors) on the platform The ideal candidate should have: - Extensive experience with ThingsBoard installation and configuration - Proficiency in IoT device integration - Skills in dashboard setup This project requires meticulous attention to detail and technical expertise to troubleshoot and provide support as needed. The devices will communic...

I'm looking for a skilled freelancer to help me with the setup of ThingsBoard and the configuration of multiple sensors on the platform. This is a key project for our smart solution deployment. Tasks include: - Installing and configuring ThingsBoard - Setting up default dashboards - Configuring a minimum of 10 devices (specifically Temperature, Humidity, and Motion sensors) on the platform The ideal candidate should have: - Extensive experience with ThingsBoard installation and configuration - Proficiency in IoT device integration - Skills in dashboard setup This project requires meticulous attention to detail and technical expertise to troubleshoot and provide support as needed. The devices will communic...

I'm seeking a seasoned Embedded Systems Developer with a strong background in firmware design and hardware integration for an IoT project focused on a wearable technology. Your primary responsibilities will include: - Designing and developing the firmware for the wearable device. - Integrating the necessary hardware components. - Ensuring efficient data collection and transmission capabilities. Ideal candidates will have: - Proven experience in developing firmware for wearable technology. - Strong expertise in hardware integration. - Excellent understanding of data transmission protocols in IoT. Please provide examples of similar projects you've completed. I look forward to your proposals.

...skilled professional with experience in configuring Raspberry Pi as an IoT device. The specific task is to set up the device to connect to an RTL-SDR dongle, a Cellular modem to allow internet access through a sim card, and be battery powered. Key Responsibilities: - Configure the Raspberry Pi to function as an IoT device linking to an RTL-SDR system - Implement real-time frequency scanning capabilities Ideal Skills: - Experience with Raspberry Pi configuration - Familiarity with IoT systems - Knowledge of RTL-SDR systems - Skills in enabling real-time frequency scanning The device would need to have battery capacity of at least 5 days (hopefully 10 days), and turn on once a day to run a program to scan for a specific VHF signal using...

...business research, and strategic execution. This AI must be fully autonomous, continuously improving itself, executing complex tasks, and interacting with me through chat in multiple languages (especially Albanian and English). Key Functionalities & Requirements: 1. Continuous Deep Learning & Research The AI must continuously learn from multiple sources, including websites, books, academic papers, forums, and real-world applications. Areas of learning must include (but are not limited to): Hacking & Cybersecurity: Ethical hacking, penetration testing, security exploits, encryption, and counter-attacks. Programming & Development: Python, Perl, .NET, C, C++, C#, Java, PHP, JavaScript, and more. Electronics & Hardware...

I'm looking for an experienced IoT mobile app developer who can create a feature-rich IoT control app for both Android and iOS. This app will connect to various IoT devices such as smart switches, water pump controllers, and fan controllers. Also need to build the framework for the microcontroller. So the app can control smart devices. Core functionalities: - Device Control: Users should be able to operate their IoT devices through the app. - Status Monitoring: The app should provide real-time updates on the status of connected devices. - Configuration Setup: Users should be able to set up and configure their devices by scanning a QR code. Design: The app should have a feature-rich design, providing users with an intuitive yet compre...

I'm in need of a simple yet effective IoT software that is compatible with nRF Thingy91 and can connect with nRF Cloud. In MVP phase project will be very simple and good for beginners! Key Features: - The main functionality of the software will be data monitoring. - It should be able to send data to nRF Cloud. Ideal Skills and Experience: - Proficient in IoT software development and build files for installation (.hex files). - Prior experience with nRF Thingy91 is a plus. - Familiarity with nRF Cloud. - Strong understanding of data monitoring systems.

...integrating multiple infrared motion sensors with a PTZ camera. The system should relay the coordinates of detected motion to the camera, allowing it to pan accordingly. If the motion is identified as human through pattern recognition, a nearby drone should automatically take off to track the 'intruder'. Key Aspects: - Utilize infrared sensors for motion detection. - Transmit coordinates from the sensors to the PTZ camera via MQTT. - Use a pre-trained machine learning model for human detection. Ideal Skills and Experience: - Proficient in working with infrared sensors. - Experienced with PTZ camera integration. - Knowledgeable in various network protocols, specifically MQTT. - Familiar with machine learning models for pattern ...

...analog signal from the sensor into a digital format using an ADC (Analog-to-Digital Converter). Transmit the digital data via an RX/TX communication interface, implemented using an FTDI chip (e.g., FT232R), to a host system (such as a computer or another microcontroller). Advanced signal analysis (e.g., distance calculation) is not required—the device is only responsible for data conversion and transmission. Functional Requirements Sensor Interface The device shall be equipped with a piezoelectric sensor capable of detecting pulses reflected from the bottom or obstacles at depths greater than 50 m. The sensor captures the signal, which is then converted into an electrical signal. Signal Conversion The analog signal from the ...

...maximizing vertical tunneling and minimizing corner tunneling to achieve higher ON-current (ION) and lower subthreshold swing (SS), making it suitable for ultra-low power applications like IoT and wearables. --- Key Areas of Optimization: 1. Gate-to-Source Overlap (Lsov): Increasing Lsov enhances vertical tunneling, leading to a higher ON-current (ION). 2. Tunnel Layer Thickness (Tt): Optimizing Tt is crucial to balance tunneling efficiency and electric field strength. 3. Doping Concentration in Tunnel Layer: Selective N++ doping enhances vertical tunneling while suppressing unwanted leakage. 4. Ferroelectric (FE) Layer Properties: Adjusting thickness (Tfe) and coercive field (Ec) improves the negative capacitance effect,...

...an L293D motor driver, and connectivity for additional components like servo motors, an ultrasonic sensor, and infrared sensors. The PCB should be compact, efficient, and optimized for easy assembly. SAMPLE layout design attached ( resistor, capacitor and voltage controllers to be added as required ) Project Requirements: Microcontroller: Arduino Nano (ATmega328P) Motor Driver: L293D (Dual H-Bridge) for controlling two DC motors Servo Motor Control: Two male header pins for connecting two servo motors Powered by 5V from the Arduino or external power Sensor Connectivity: One female header (4 pins) for an ultrasonic sensor (HC-SR04) Two male header pins for IR sensors (typically 3-pin each: VCC, GND, OUT) Power Supply: 5V for Arduino Nano, Ser...

...skilled professional to design and 3D print the top section of an underwater ROV. The main purpose of this task is to create a streamlined top for the ROV. Details: - A standard level of detail is required for the 3D design. - The top section should be optimally designed for streamlining purposes. - The material for the 3D print should be PLA. - Specify the exact dimensions and shape required for the top section of the ROV. - Clarify if any specific waterproofing measures are required for the top section. Waterproof polycarbonate Ideal skills for this project include: - Proficiency in 3D design software. - Experience with designing for aerodynamics or hydrodynamics. - Ability to work with PLA material. Please provide examples of similar projects you have comple...

...Responsibilities: - Implement and optimize Audio kinetic Wwise for real-time audio processing in motorsport applications - Integrate telemetry data from various sensors (RPM, speed) with Wwise for dynamic audio feedback - Design and deploy Wi-Fi and antenna systems for reliable data transmission in high-speed racing environments - Develop mesh Wi-Fi networks to ensure continuous connectivity across large race circuits - Create custom plugins for Wwise to interface with external telemetry systems - Optimize audio performance based on real-time telemetry data - Collaborate with engineering teams to refine sensor integration for accurate data collection - Customize telemetry dashboards for engineers and drivers to monitor performance metrics...

I'm seeking an expert in electronics and IoT to design a Bluetooth Low Energy (BLE) moisture sensor and temperature of soils for agricultural use. This project involves developing a basic precision sensor that can measure soil moisture levels and pH. Key Requirements: - The sensor must be able to collect data on soil moisture levels and soil pH. - Design should ensure the sensor is suitable for use in agriculture. - Basic precision is sufficient for this project. Ideal Skills: - Expertise in designing Bluetooth Low Energy (BLE) devices. - Experience in creating sensors for agricultural applications. - Knowledge of soil pH measurement techniques. Please provide examples of similar projects you've worked on ...

I'm seeking an experienced embedded circuit programmer to develop a microcontroller-based system for interfacing with motion sensors. Key Requirements: - Develop a microcontroller-based system. - Integrate with motion sensors. - Experience in sensor interfacing is crucial. - Knowledge of embedded programming is essential. - Ability to process sensor data in real time. An understanding of how to effectively program, interface and communicate with motion sensors is vital for the success of this project. The system should be developed using Arduino as the microcontroller platform.

...This is your chance to own the WearOS development and be part of something big. WHAT WE’RE BUILDING A WearOS app leveraging geolocation, motion sensors, and real-time server communication to enhance workplace safety. The first version exists, and now we need to refine, scale, and optimize it. WHY JOIN US? High Impact – Your code will directly help protect workers in high-risk environments. Fast Execution – Full project delivery in 1 month. If you can’t commit, this isn’t for you. Long-Term Growth – If we work well together, you could lead the expansion into Android/iOS apps, a web platform, and potentially lead the future Devs team. Performance Bonuses – If your execution is surp...

...looking for a professional with expertise in WiFi networking, hardware selection, and software development to help me build a system that will detect nearby WiFi clients (both associated and unassociated devices) and trigger an alarm when a new device is detected. Requirements: Hardware Selection: Identify a device (router, access point, or specialized hardware) that can scan for WiFi clients (associated and unassociated). The device should have a digital output (alarm out) or another method to trigger an external alarm. Preferably, the hardware should support monitor mode to detect probe requests. Software Development: Write a program that continuously scans for new WiFi clients (devices that appear in range). The software should log detecte...

I require the design and fabrication of two distinct printed circuit boards (PCBs), each complete with schematics, layouts, Gerber files, and a Bill of Materials (BOM) specifying component selection and library management. Design 1: Compact Sensor Interface PCB This design prioritizes a compact form factor and incorporates an HLK-10M05 power supply module with integrated safety circuits, including safety capacitance and common-mode inductance. The 5V and GND outputs are routed to the load. A 2.54mm pitch is to be maintained for all pin pitches where feasible. An ESP32-S3-DevKitC will be mounted via berg strips. The board requires the following connectors: Three 4-pin I2C connectors (VCC, GND, SCL, SDA) for interfacing with DFRobot SEN0537 (), DFRo...

Drawing Instructions for Primary Storage Tank - Tank 1 General Drawing Guidelines 1. Use Standardized CAD Conventions: - Follow ISO and ASME Y14.5 Geometric Dimensioning & Tolerancing (GD&T) standards. - Fully annotate drawings with dimensions, materials, and tolerances. 2. Numbering Conventions for Components: - Use three-digit format (e.g., 101, 102, 103) for primary components. - Subcomponents use decimal notation (e.g., 101.1, 101.2). 3. Use of Sections & Exploded Views: - Include cross-sectional views for internal structures. - Provide exploded views for assembly clarity. - Add detail views for complex features. Structural Design & Component Details 1. Outer Shell (Component 101) - Material: Stainless steel (316L) or Aluminum (6061-T6). - Wall Thickness: ...

...essential features and protective measures. Key Requirements: - Overcharge and Over-discharge Protection: The system should prevent battery damage due to excessive charging or discharging. - Current Balancing: Implement a mechanism to balance the current across all cells in the battery pack, ensuring uniform performance. - Temperature Monitoring: Include temperature sensors to monitor the battery's thermal condition. - Overvoltage Protection (OVP): Design the system to handle overvoltage situations. - Active Balancing: This should be integrated, allowing for real-time adjustments and optimizations. - Short-Circuit Protection: Ensure the system can safeguard against potential short-circuit scenarios. Deliverables: - Complete design including simu...

I'm looking for an expert in ESP32 development to create a smart toy. The project involves integrating a speaker and a microphone with the ESP32. Key Requirements: - Extensive experience with ESP32 - Strong understanding of Edge AI and open AI - Knowledge about speech to text and text to speech - Skills in integrating audio components - Knowledge of IoT principles - Good communication for project updates and discussions Please note, the specific functionalities of the smart toy are yet to be determined, so flexibility and creativity in design and functionality will be appreciated.

I need modifications to my existing Raspberry Pi program. It's currently set up to count physical objects using an infrared sensor. The program should be able to: - Count items: The current program needs to be adjusted to properly tally the physical objects being dete...infrared sensor. The program should be able to: - Count items: The current program needs to be adjusted to properly tally the physical objects being detected by the sensor. - Measure time between items: I want the program to also record the time intervals between the detection of these objects. Ideal Skills and Experience: - Proficiency in Python, as well as experience with Raspberry Pi programming. - Familiarity with working with infrared sensors. - Previous experience with object counting a...

I'm in need of a PCB design tailored for a Maixduino. This board should accommodate an RJ11 connector, capable of controlling 4 DC motors and 1 servo motor, along with connections for 3 and 4 pin sensors. These sensors will include IR, LDR, humidity and temperature sensors, and ultrasonic sensors. Key Features: - Dual power input: The PCB should be designed to be powered by both an external power supply and a battery. - Versatile sensor compatibility: It should support 3 and 4 pin sensors. - Robotics centric: The primary application of this design is for robotics. Ideal Skills and Experience: - Extensive experience in PCB design - Proficient with Maixduino specifications - Familiarity w...

...where the database connections won't initialize. I'm working on an app that communicates with an ESP32 and stores sensor data in the Firebase Realtime Database. Key Requirements: - Expertise in Android and iOS app development - Strong knowledge of Java and Android Studio - Experience with Firebase Realtime Database - Understanding of IoT and ESP32 - Problem-solving skills to diagnose and fix the database connection issue - Expertise in iOS app development using Swift. - Knowledge of setting up and managing Firebase security rules. The successful freelancer will help to troubleshoot and resolve the initialization issue, ensuring the app can properly connect to the Firebase database and store...

...functionality, transmits data via MQTT protocol to the cloud, and can flexibly integrate with other sensors. Project stages: Selection of hardware platform: It is recommended to use one of the options: ESP32 + Quectel BG96 (flexible solution with separate components). Nordic nRF9160 (modem and MCU in one chip, simpler integration). Development of schematic and PCB design: The board should include: Modem (Quectel or integrated in Nordic nRF9160). Microcontroller or integrated chip. eSIM or SIM card slot supporting operator 1NCE. Antennas for LTE-M/NB-IoT communication. Sensor connections via UART/I2C/SPI (depending on the task). Power interface considering power consumption. Prototype manufacturing: Ordering the printed circuit board (P...

I'm in need of a proficient PCB designer who can create a double-layer PCB for use in industrial machinery. The PCB will need to support functionalities related to motor control, hydraulic systems, and linear actuators. Key Requirements: - Design of a double-layer PCB - Motor control functionality - Integration with hydraulic systems - Compatibility with linear actuators Ideal Skills: - Extensive experience in PCB design - Understanding of industrial machinery requirements - Proficiency in designing for motor control and hydraulic systems - Familiarity with linear actuator systems . The expected size of the PCB is compact to fit within limited space. The PCB should operate on a low voltage, either 12V or 24V. Please include s...

UI design for website for showing occupancy data for office To effectively visualize the data collected from occupancy sensors and support decision-making for facilities management, the following types of charts and visualizations are recommended: ________________________________________ 1. Real-Time Occupancy Data • Bar Chart or Gauge Chart: Show the current number of people in the office or at desks. • Heatmap: Display real-time occupancy across different zones or floors of the office. ________________________________________ 2. Historical Trends • Line Chart: Show occupancy trends over time (e.g., daily, weekly, or monthly). • Area Chart: Visualize peak and off-peak occupancy periods. • Calendar Heatmap: Highlight occupancy pa...

I'm looking for an experienced freelance goal-getter who will lead sales process and close deals for IoT powered energy efficiency solution. The individual or Sales Agency must have strong industry contacts, network in Canadian energy sector. The focus is primarily B2B Clients acquisition and sales closing. This is a highly rewarding role that comes with leadership responsivities', sign-on bonus, sales commission with possibility of profit only equity. Key requirements: - Candidates must have a strong sales track record and deep industry knowledge and ready clients. - Primary sourcing location is Ottawa or Gatineau. - Strong communication in English and french and networking skills are crucial. - Candidates with el...

...hour per day (or per night). - You will help me design, code, and develop an IoT product using MicroPython running on an ESP32 microchip. - You do *not* need any experience with microcontrollers, electronics, electrical engineering, mechatronics, Arduino, PCB, circuit design, or Python. - If Freelancer.com prevents you from bidding on this project or if you want to avoid “spending” one of your Freelancer bids you can apply "passively” for this project by pasting "MicroPython_ESP32_11_September_2019" into your Freelancer profile. Please see the section below in this posting called *** APPLYING "PASSIVELY" *** for more information. *** LOCATION *** You must live the Western Balkans in one of the following countri...

I am looking for an experienced firmware developer who can work with the ESP32 platform. This project involves creating firmware for an IoT device. It is small project with mostly completed developments. Key Responsibilities: - Implementing sensor data reading and processing - Enabling wireless communication via BLE - Overseeing battery management and monitoring Ideal Skills and Experience: - Extensive experience with ESP32 - Proficiency in ADC (Analog to Digital Converter) - Skilled in Bluetooth Low Energy (BLE) communication - Knowledgeable in Battery Management Systems (BMS) If you are a talented firmware developer with the necessary skills and experience, I would love to hear from you. please do not bid if you not from NCR or ...

...Stage Tracking System for Ti2 Inverted Microscope Project Overview: I need a Python coder experienced in robotics and automated control systems to develop a script that controls a motorized stage. The stage will track a larval zebrafish in a petri dish and keep it in focus under a Ti2 inverted microscope’s camera. Key Responsibilities: Develop a Python-based control system for a motorized stage (2X, 1Y, 1Z axes). Implement automated tracking to keep a fish centered in the microscope’s field of view. Ensure precise and smooth movements using stepper motors. Required Skills: Strong Python programming experience. Knowledge of robotics and automation. Familiarity with stepper motor control and image processing. Syst...

Project Description: I need a freelancer to design and implement a predictive maintenance system using big data analytics. The system should collect real-time sensor data (temperature, vibration, lubrication levels) and apply machine learning models to predict equipment failures. The goal is to optimize maintenance schedules, minimize downtime, and improve operational efficiency. Requirements: ✅ Data collection from real or synthetic datasets (Kaggle, HuggingFace, or generated data). ✅ Big Data technologies (Hadoop, Apache Spark) for real-time processing. ✅ Machine Learning models (e.g., Scikit-learn, TensorFlow) for failure prediction. ✅ Dashboard for visualization (e.g., Streamlit, Grafana). ✅ Clean and well-documented code (preferably in Python). Del...

I need help with my IoT project. It involves the ESP8266/ESP32 platform and includes data logging and sensor integration functionalities. Please refer to this video link for details: I have all the necessary hardware, but I'm in need of the appropriate codes and schematics to get everything up and running. Ideal skills and experience for the job include: - Proficient in coding for the ESP8266/ESP32 platform - Experienced in IoT projects - Able to provide clear and understandable schematics - Knowledgeable in sensor integration and data logging functionalities.

...to help design and implement an ESP32-based lighting control system. The specifics of the project include: - Control: The type of lighting control is yet to be determined. It could be automatic, manual via remote, or manual via an app. - Environment: The lighting system could be used in either an indoor or outdoor setting, possibly both. Key skills and experience required: - Proficiency with ESP32 and lighting systems - Knowledge of various lighting control mechanisms - Experience with designing for both indoor and outdoor environments Please note that the exact features of the system, such as dimming capabilities, color changing, or motion sensors, are still open for discussion. Ideal candidates would be able to provide guidance and ...

...to create a motion detection and object recognition system using OpenCV and machine learning techniques. This system will be an essential part of a security solution designed to detect specific types of movements and send real-time alerts based on predefined conditions. Key Responsibilities: • Develop an AI-based motion detection software using OpenCV. • Implement object recognition algorithms to identify human movement in real-time. • Optimize AI models for speed and accuracy in motion detection, with low computational requirements. • Integrate the AI system with an IoT platform for seamless communication with cloud-based systems. • Ensure the system works efficiently across various environments, including ...

... I am wanting someone to review and fix my log viewer page on my automotive website. It needs to be able to accept uploaded files (such as a csv file with data in it) which will then display the results into a graph. Unfortunately this isn't fully functional and I require someone to fix the errors. I have attached a csv file for you to upload it into the website link above and see how it all works. There is a CSV file which gets created from a automotive software called RossTech. This CSV file contains data that gets logged from the car sensors. Every column is a different sensor. When uploading the CSV file into my log viewer page, it needs to translate from numbers to a graph. At the moment it pushes the data but cannot change x and y a...

I'm in need of a professional and modern logo for my website www.kuleventiler.no. We specialize in selling ball valves, pneumatic actuators, and electric actuators, and we're looking for a logo that resonates with our industry. "kuleventiler" is the norwegian word for ball valves. Key Aspects: - Style: We're after a modern, clean, and industrial look. - Creative Freedom: You're welcome to use your creativity! This could mean: - Including the website name in the logo or not. - Incorporating a visual element like a ball valve or actuator, or opting for a more abstract approach. - Format: The final product should be delivered in vector formats (AI, EPS, SVG) as well as PNG and JP...

...have already developed ChaiGuard as a fully functional, 3D-printed product, and now we are looking to take it to the next level with a sleek, professional, and mass-producible design for injection molding. About ChaiGuard: ChaiGuard is an innovative anti-spill device designed for chai lovers! It automatically detects boiling chai and prevents overflows while also alerting the user with a buzzer. How ChaiGuard Works: ✔ Universal Fit Design – Can be attached to almost any container with its adjustable clamp. ✔ Smart Chai Detection – Equipped with stainless steel chai sensors (probes) that detect the liquid level. ✔ Automatic Airflow Control – When chai reaches the probes, ChaiGuard activates a fan to cool the brew and prevent overflow...

I need a sophisticated optoelectronic project which involves multi-color LED indicators. The primary purpose of these LEDs is to convey different status signals. Key Requirements: - The LED indicators should be multi-color - They should be used for status indication - Control...optoelectronic project which involves multi-color LED indicators. The primary purpose of these LEDs is to convey different status signals. Key Requirements: - The LED indicators should be multi-color - They should be used for status indication - Control of the LEDs should be handled by automated sensors Ideal Skills and Experience: - Proficiency in optoelectronics - Experience with multi-color LED circuits - Knowledge in designing systems for status indication - Expertise in int...

...develop a proximity sensor for a dog leash and harness connection. Key Features: - **Type**: Proximity sensor - **Usage**: To sense the connection between a dog leash and harness - **Features**: - Wireless connectivity - Weather resistance (for outdoor use) - Safe around dogs (non-intrusive, sturdy) Ideal freelancers should have prior experience in creating sensors with wireless capabilities and knowledge in developing pet-safe devices. A strong understanding of weather-resistant materials and technology is also vital for this project. The proximity sensor should have a short detection range of 0 to 30cm. The sensor should use a rechargeable battery. The sensor should provide an audible alarm and preferably a smartphone...

...*Ak Connect* – Unified Mobile App for Loyalty, Services, Facilities, Community, and F&B **Issued by:** Ak Investment --- ### **1. Project Overview** Ak Investment seeks to develop a **unified mobile app** using Odoo as the backbone platform. The app will consolidate five core functionalities into a single, user-friendly interface: 1. **Loyalty & Rewards Program** 2. **Premium Concierge Services** 3. **Facility Management Portal (B2B)** 4. **Residential & Tenant Community Hub** 5. **F&B Experiences & Meal Kits** **Key Objectives:** - Enhance customer engagement across Al Khozama’s hospitality, retail, and real estate portfolios. - Streamline operations for tenants, corporate clients, and VIP guests. - Leverag...