Stm32 f107 ethernet jobs
I'm seeking a proficient STM32 developer with expertise in Proteus 8. The project involves creating and emulating STM32 code. All specific details will be provided upon discussion.
...peripherals. -Select components, including power management ICs, MOSFETs, relays, and ADCs. -Generate BOM and Gerber files for manufacturing. Embedded Firmware Development: -Write and debug firmware for STM32 microcontrollers (or equivalent). -Develop drivers for peripherals such as thermistors, solenoids, pumps, and actuators. -Implement communication protocols (I²C, SPI, UART, GPIO). Linux Software Development: -Configure and write code for Raspberry Pi to interface with hardware components. -Develop Linux device drivers if needed. -Enable seamless integration between the Linux system and STM32 firmware. Testing and Debugging: -Test and debug hardware and firmware. -Use tools like oscilloscopes, logic analyzers, and multimeters for hardware validation. Integr...
I'm looking for an expert firmware programmer to help develop firmware for an STM32 embedded project. The main purpose of this firmware is to collect data from a current measurement sensor. The data will be used for real-time monitoring and displayed on an e-paper display. Ideal candidates should have: - Extensive experience with STM32 firmware development - Proficiency in programming for sensor data collection - Knowledge in addressing e-paper display through SPI Your role will involve: - Writing efficient and reliable firmware Schematics for the microprocessor are complete and available. I look forward to your proposals.
I'm in need of a skilled PCB designer who can create a comprehensive PCB design from my provided circuit in a PDF format. The primary goal for this project is product development, so the design should be suitable for that purpose. Key Tasks: - Interpret and translate the provided circuit information into a functional PCB design. - Ensure the design is comp...Demonstration for simulation purposes. Ideal Skills: - Proficient in PCB design software, with experience in Proteus 8. - Understands the intricacies of design for product development. - Capable of creating both SMD and Through-hole designs as needed. Note: The specific types of components or size constraints for the PCB design have not been determined yet, so flexibility and adaptability are key. STM32 Cube IDE expert ...
...USB 3.0 (present in CMIO) • Ethernet (present in CMIO) • CANBUS • PCIe (present in CMIO) • SD card slot (present in CMIO) • eDP video signal + backlight • AIS class B (from other open-source) • Other UART inputs with optocouplers (to be decided) • GPS • GPIO ports accesss via male connector (compatible with Raspberri Pi) These are the main requeriments, maybe other minor will appear during the design. I can provide schemas for all the parts involved (can bus, eDP, AIS,...). The job consist in the design of the board merging all schemas in one, and generate all the files needed by JLCPCB or other manufacturer to produce the board. Ideal skills & experiences: - PCB Design and Raspberry Pi familiarity - Hardware architecture knowled...
...U50's QSFP port to a 10GbE SFP+ router. Required Skills: Strong understanding of FPGA design principles and methodologies. Hands-on experience with AMD Alveo U50 and its networking capabilities. Familiarity with Ethernet MAC IP cores to use on Alveo U50 Knowledge of XRT, Xilinx Vivado Design Suite and Vitis development environment. Experience with network programming and protocols (SFP+, QSFP, Ethernet, TCP/IP). Excellent communication and problem-solving skills. Project Scope: Consult on the selection and configuration of appropriate Ethernet MAC IP cores for 10GbE connectivity to get to the basic "Hello World" working model. Advise on network design considerations (eg. interfacing the U50's QSFP port with an SF...
As discussed, this is the direct hire for the project. I will repost the details once you have accepted the job.
I'm experiencing connection issues with my Triumph ADler CD1242 DC2242 scanner. Despite being connected via an Ethernet cable, the scanner isn't syncing with my computer as it should. Ideal Skills and Experience: - Expertise in troubleshooting scanner connectivity issues - Familiarity with Triumph ADler CD1242 DC2242 models is a plus - Proficient in using Ethernet connections for device setups - Excellent problem-solving skills and attention to detail
...components. All boards you design shall have evluation board quality. It means that they will not actually go into real components and be used for internal purposes only. Ideal Skills: - Extensive experience in PCB and hardware design, including power supply, FTDI, UART, CAN, SPI/QSPI and I2C - Microcontroller and Microprocessor layout experience, especially industry-grade controllers like NXP, STM32, Renesas and Raspberry Pi CM - Knowledge about signal integrity, EMC and good design practices in general Requirements - all parts must be available and recommended on Mouser or Digikey - no China replicas - all design must take place in KiCAD - you will need to hand over all design files necessary for the project, including symbols and footprints - moe License - all design rights...
I'm seeking a skilled PCB designer with experience in IoT devices. The task is to design a compact PCB (4x3cm or smaller) incorporating the STM32 microchip for UART, SIM800L (GSM), and NEO-6M (GPS). The design should also accommodate a buzzer, mini LEDs, and USB-C charging, with provisions for battery integration (details to be finalized). Key Tasks: - Optimize the antenna design for GSM and GPS to ensure the best performance. - Create compact and efficient layouts that can withstand the rigors of a prototype. - Transition existing code from ESP32 to STM32. Key Considerations: - The primary focus of the PCB design is compactness. The smaller the PCB, the better. - The IoT device will be powered by a rechargeable battery, so consideration for this power source is cruci...
I'm looking for an experienced software engineer to develop control software for my RGB LED project using the TLC5955 and STM32F...control software for my RGB LED project using the TLC5955 and STM32F411. I have the PCB ready, and the software needs to be written in stm32CubeIde. Key Responsibilities: - Develop software for individual control of RGB LEDs - Implement features including color changing effects, brightness control, and predefined patterns The ideal candidate for this project should have: - Extensive experience with STM32 programming - Proficiency in using stm32CubeIde - A good understanding of controlling RGB LEDs - Ability to create engaging and smooth color changing effects and brightness adjustments Please note that the software needs to allow individual contr...
I'm seeking an expert in STM32 and SIMA7672S to set up a web server on the SIMA7672S with STM32, accessible via a public static IP address. The server needs to serve static files such as HTML and JSON, while also handling real-time system status updates. Key Responsibilities: - Configure the STM32 to serve static web content and handle real-time system status updates. - Enable the STM32 to process query/response data to a serial device. Skills and Experience Required: - Deep understanding of STM32 and SIMA7672S. - Proficiency in STMcubeide IDE. - Previous experience in setting up web servers on STM32 based systems. - Familiarity with AT commands and the manual of the SIMA7672S. - Ability to configure for real-time data updates. The ideal ca...
I need to remotely access serial ports over a 4G connection. My actual solution that is working is: REMOTE SIDE, this consists on a battery operated device controlled by 2 UART PORTS (RS232 9600 BAUD 8 byte transparent SERIAL (HARDWARE 2 X serial to Ethernet converter (MOXA 5110), 1 X Openwrt modified router with wireguard tunnel configured, 1 X 4G modem (ALSO INCLUDE 2 NORMAL IPCAMS (CCTV) CONNECTED TO SPARE ETHERNET PORTS OF THE ROUTER) LOCAL SITE , VPN SERVER, this is actually my local home network I used it since it's a stable and accessible network (1 X OrangePi with piVPN and wireguard, 1 fixed internet connection router) CONTROL SIDE, this is consists on the remote control of the device. Its a box with keys that "just" send and receive serial data ove...
I'm seeking an experienced EMV low-level firmware developer for a project involving an STM32 application. The primary purpose of this application is to read Contactless cards using a PN5180 chip. Key Responsibilities: - Develop firmware that supports card reading and authentication. - Implement robust error handling and logging mechanisms. Ideal Skills: - Extensive experience with EMV firmware development. - Proficiency in working with STM32 microcontrollers. - In-depth understanding of PN5180 and its functionalities. - Skills in designing firmware for reading Contactless cards. - Experience with implementing card authentication systems. The PN5180 should be interfaced with an EMV communication interface. Therefore, expertise in this area is essential. Please note, t...
Have you worked with NXP NFC chips. We need write drivers for PN5180 to read EMV data
Create a software library in C that will enable one typical consumer PC--containing typical PC hardware...should not make use of serial-based COM ports to communicate. Communication can be made at the time of bidding for more information related to what a typical consumer PC setup may look like. Some examples of acceptable transport hardware includes ethernet, xHCI-based setups leveraging DbC, xHCI-based setups that create USB transports, and so on. Serial-based COM port communication and DMA-based communication are not applicable solutions. Exceptions may be made for the lattermost means of communication. If certain cables are required, such as ethernet/USB crossover cables for host-to-host communication, an applicable solution requires this equipment is cheap to obtain for ...
...Specifications: - The board should feature a 2 channel ADC for precision temperature measurement from Type K, R and S type thermocouples. - I prefer the use of the STM32 microcontroller family for this main board. - Communication interfaces supported by the main board should include I2C, SPI, UART, ADC, RS485, and RTC. Deliverables Expected: 1. Three fully assembled and programmed PCBs ready for testing. 2. Complete source code for the project. 3. Schematic and Gerber files, including a pick and place file for PCB assembly. 4. Bill of Materials (B.O.M.) with vendor information. Ideal Skills and Experience: - Proficient in STM32 microcontroller programming and board design. - Extensive experience with thermocouple interfacing. - Knowledgeable in PCB design software and cr...
Looking for a stm32 + nextion programmer, extensive experience in inkjet printers, if it does not meet the specifications I will not award the project. I already have firmware that I need to integrate more functions and update. Add more functions to the project - ink system controls - level control - control and maintenance - humidity control - ink flow control - lamp control - roll to roll
I'm looking for a skilled hardware designer to create a board for the STM32L031K6 microcontroller. The board will be used for prototy...STM32L031K6 microcontroller. The board will be used for prototyping, and needs to be compatible with the ST-Link V2 programmer. Key Requirements: - The board should include GPIO pins and Analog inputs/outputs. - The power source for the board will be USB, so it needs to be designed accordingly. Ideal Skills and Experience: - Extensive knowledge and experience in hardware design, particularly with STM32 microcontrollers. - Familiarity with ST-Link V2 programming. - Ability to design for USB power supply. - Good understanding of GPIO and Analog inputs/outputs. I need a professional who can ensure the board is designed efficiently for protot...
Overview: I have developed an application for Ubuntu Server 24.10, and I want to distribute it to users as an OVA (Open Virtual Appliance) file. The goal is for users to easily deploy the VM on ESXi or VirtualBox without needing DHCP servers in their datacenter. I need an expert in Ubuntu Server who can create a custom setup wizard for configuring a static IP on an Ethernet interface. The project will involve setting up specific DNS settings as well. Requirements: - When the VM starts for the first time, it should prompt the user to enter network configuration details (IP address, default gateway, DNS) through a setup wizard. - The VM should automatically use these settings for its network configuration, without requiring the user to have access to the VM after deployment. Ideal ...
Project Description I need a professional hardware/electronics designer to create a complete ESP32-S3-based pcb. The ...hardware/electronics designer to create a complete ESP32-S3-based pcb. The design will feature: - ESP32-S3 module (placed on edge side of the PCB) with USB-C for programming. - 18 high-resolution analog inputs for NTC 10K/20K/100K sensors with shared COM pins. - 8 solid-state relay (SSR) outputs for controlling contactor signals, with shared COM pins. - One high-reliability 0-10V analog output. - Ethernet port with the W5500 IC and RJ45 connector at the bottom edge. - Integration of an external RTC module (DS3231) with battery backup for accurate timekeeping. - Power regulation, protection circuits, and optimized PCB design. - Milled slits for isolating I2...
After removing an SD-WAN device, my VoIP system is encountering issues. My current setup involves an ATT Modem connected to a Meraki MX100, which serves as the DHCP server, and then to a Cisco SPF350 switch. Here's the situation: - The phones work fine when connected directly to the modem. - My Laptop receive DHCP IPs when connected to the phone via ethernet. - However, the phone fail to get an IP when connected to any port of the switch. I need someone to troubleshoot the current configuration. All other devices in the network are functioning as expected. Ideal skills for this job include: - Extensive knowledge of Meraki MX100 and Cisco SPF350. - Experience with VoIP network issues. - Strong troubleshooting skills. Please provide a detailed plan of action and any simila...
...Experience in projects Tool: Azure DevOps, Process modelling tools • Ability to use analyse and use data using BI Tools (Business Objects, Qlik, Tableau) to underpin solution approaches and benefits realization • Strong knowledge of BSS/OSS Systems and Solutions (Service Activation, Network Discovery & Reconciliation, Inventory, Service Assurance). • Knowledge of standard Telecoms Services (e.g., Ethernet Links, IP Connectivity). • Experience in OSS & Network Orchestration and Activation domain. • Understanding of API Design Requirements Capture. • Familiarity with product, service, network, and device models.(Highly desirable) • Proven track record of successful process or business improvement work, ideally in telecoms. • A...
I am in need of a microcontroller expert who can convert my current setup (ESP32, SIM800L, Neo6M GPS) into a more compact design using the STM32G030F6P6TR chip and embed it with a SIM868. The goal is to create a compact, efficient, and versatile tracking device. Responsibilities: - Convert the existing microcontroller setup to an STM32G030F6P6TR chip. - Embed the design with the SIM868 for enhanced functionality. - Design a PCB that accommodates this compact design without compromising performance. - Ensure the device is suitable for both indoor and outdoor use. The device needs to support real-time tracking functionality. Therefore, experience in designing tracking devices is preferred. Please note, I require only qualified professionals to bid on this project. Proposals generated by ...
We are looking for an experienced Firmware developer and Electronics Engineer (EE). You will continue the development of an STM32 design and a seperate ESP32 design - both with BLE. Also you will continue the electronics design of the board, simulate the circuits and layout a PCB, while communicating with clients, vendors and the team. You will be working for a small StartUp and directly report the the CEO, who is also an EE. We are looking long-term to acquire a Senior EE for a permanent role in the team. We run the company fully remote, online and have staff located globally. So you can locate yourself as you see fit. We are demanding as we do require high quality work, there is no place for an EE that cannot or will not do the detailed work and limit the number of mistakes...
I'm in need of an experienced professional who can assist me in setting up communication between my Omron CJ2M PLC and a Yaskawa VFD via Ethernet/IP. Key tasks include: - Configuring the PLC to establish successful communication with the VFD - Ensuring the setup adheres to Ethernet/IP protocol standards - making the PLC control speed of the motor Ideal skills for this project: - Proficient in PLC programming, specifically with Omron CJ2M series - Extensive experience with Ethernet/IP communication setup - Prior experience with Yaskawa VFDs - Troubleshooting skills to resolve any potential communication errors
...passive monitoring using the PIR sensors. Key Features of the System: Energy Management: Solar panels (10-20W) with MPPT controller. Three 12V, 10Ah LiFePO4 batteries with automatic rotation to maximize lifespan. Voltage regulators to power components at 5V and 3.3V. Motion Detection and Processing: PIR sensors to trigger system activation. OV2640 cameras controlled by microcontrollers (ESP32 or STM32) and managed using MOSFETs. AI Processing: Coral Dev Board Micro for real-time inferences. Communication Modules: Wi-Fi (ESP32), LoRaWAN (Heltec LoRa), or 4G/LTE (SIM7600), selectable based on site requirements. System Monitoring and Management: Secondary microcontroller for managing energy, environmental sensors (temperature and humidity), and communication modules. Freelance...
I am looking for an electronic engineer who can work in our team. We have a project to design a switch panel using STM32. I will share the PCB layout and switch links in a quick chat. I want to design the PCB using EasyEDA because I will manufacture PCB in China. Please attach your portfolio if you have any experience in this field. I am looking for a individual engineer who can join our team. Thank you
...tracking for an automated welding setup. The freelancer will be responsible for interfacing both the sensor and RealSense camera with the robot, setting up communication, and writing the necessary programs to control robot motion based on real-time displacement and vision data. Responsibilities: 1. Sensor Integration: • Connect a displacement sensor (e.g., Panasonic HG-C1200) to the PC using Ethernet/IP, RS232, or another suitable communication protocol. • Integrate the Intel RealSense camera with the PC to capture real-time 3D vision data for seam tracking. • Process sensor data (e.g., displacement values and 3D vision data from RealSense) on the PC, including filtering, scaling, and noise reduction. • Set up communication between the PC and FANUC robot...
I am in need of a skilled engineer to create a BLDC speed controller and an STM32-based flight controller based on existing software and reference designs where applicable. Key responsibilities include: - Designing a flight controller based on a pre-provided Reference Design for Rotorflight firmware - Developing a 2-in-1 BLDC speed controller based on ESCape32 firmware Ideal candidates should have: - Prior experience with flight controller hardware for Betaflight/iNAV/Cleanflight/Rotorflight/etc - Prior experience with BLDC speed controller hardware for BLHeli/BLHeli32/AM32/ESCape32/etc - Ability to compact designs into predetermined PCB shape/size requirements Please provide examples of similar projects you have worked on in your application. The details of the project requirem...
I need maintenance on my internet cables. I have Ethernet points in my house, but they need to be upgraded to accommodate my new 900mb service. Ideal skills and experience for the job include: - Proficiency in residential network cable maintenance - Knowledge of internet speed requirements - Experience with Ethernet point upgrades - Troubleshooting skills for potential connectivity issues - Ability to work meticulously and maintain high standards of workmanship.
I need a professional to help me configure Zabbix for monitoring bandwidth usage on my Windows PC, specifically over the Ethernet interface. Ideal Skills and Experience: - Proficient in Zabbix setup and configuration - Experienced with Windows operating systems - Knowledgeable in network monitoring and bandwidth analysis Please note, I have already downloaded Zabbix, so the task is purely configuration focused.
...location, with work opportunities on both weekdays and weekends. Key Responsibilities Provide on-site technical support for desktops, hardware installations, and replacements (e.g., hard drives, servers, and racks). Offer console access for networking equipment such as Routers, Switches, and Firewalls to assist remote support teams. Troubleshoot and resolve networking issues, including wireless LAN, Ethernet configuration, and IP addressing. Perform system administration tasks, manage incidents/changes, and support applications on Windows platforms. Conduct basic network troubleshooting, including DHCP, DNS, and subnetting. Base Skill Set Required Proficiency in desktop/system administration, customer service, and technical troubleshooting. Hands-on experience with operating syst...
Hi Diogo; I will need for you to assist us again, this time we will be editing three tutorial videos as we have done in the past. I have provided three videos and three voice overs in the shared drop box folder. -Tutorial Video for Mac OS USB -Tutorial Video for Windows USB -Tutorial Video for Windows Ethernet/LAN
I am looking for a skilled electrician to assist with the installation of a new network infrastructure in a commercial building. The task will involve: - Fixing Cat6 cable that is wearing through PVC - Setting up a Network rack - Terminate Ethernet cables in wall jacks and patch panels - Installing and labeling patch panels for network organization - Testing all connections to ensure proper functionality - Installing cable management systems in the network rack - Setting up and configuring network switches - Labeling all network cables for easy identification - Installing and configuring WiFi access points I already have the necessary components for this project, including Cat6 cables, PVC conduits, and a Network rack. The primary goal of this installation is to set up a completel...
I'm seeking an experienced engineer to develop a device capable of reading the NMEA2000 protocol for marine navigation purposes. Key Requirements: - The device should be able to read depth soundings, compass headings, and engine fuel levels. - The device will interface via a wired connection, such as USB or Ethernet. - Experience with marine technology and NMEA2000 protocol is a must. - Proficiency in designing and developing robust, waterproof devices is a plus. Please include relevant examples of your previous work in your proposal.
After my Windows 11 updates, I need a program that presets specific network settings for my Ethernet LAN. This includes IP address configuration, DNS configuration, and default gateway settings, along with any other related settings. Ideal skills and experience for this job: - Proficient in Windows OS and its settings - Programming skills to develop the required software - Experience with networking, specifically Ethernet LAN settings - Ability to understand and implement DNS and IP configurations - Experience with accessing and modifying Windows Registry settings The program should include a user interface with simple controls for ease of use. Include firewall settings configurations for the Ethernet LAN. The program should feature a command line interface for ease...
...differences, memory usage, and performance. Deliverables: Working project files for STM32CubeIDE and Keil MDK Lite. Screenshots of simulation results, including analyzer outputs. Full source code (UserThreads.c, SineLut.c, and others as necessary). Comparison report between RTOS and bare-metal implementations. Short description to each task what was done for documentation. Requirements: Knowledge of STM32 microcontrollers, RTOS (CMSIS-RTOSv2), and Keil MDK. Experience with STM32CubeMX for configuration. Ability to implement embedded code....
...to the left or right of the main product. Requirements of product 1 (controller) - Dimensions: 95 x 45 x 115 mm (H x W x D) - 2 x screw holes for DIN rail mounting kit on back of product (See bottom for more info.) - 1 x wire terminal for 2 pins to power it. (Labelled "12/24V" and "GND".) - 4 x small rectangular status LEDs to display statuses (labeled "PWR", "FLT", "BFIO", "BFA". ) - 2 x ethernet connections on the front. (Labeled ETH1 and ETH2) - 1 x USB A port. - 1 x USB C port. - 1 x miniSD slot for memory card. - 1 x WIFI antenna screwing terminal. - 1 HDMI mini port. - 1 x wire terminal for 4 pins titled RS-485 (pins labeled "Tx+", "Tx-", "Rx+" and "Rx-" ) - 1 x ...
...location, with work opportunities on both weekdays and weekends. Key Responsibilities Provide on-site technical support for desktops, hardware installations, and replacements (e.g., hard drives, servers, and racks). Offer console access for networking equipment such as Routers, Switches, and Firewalls to assist remote support teams. Troubleshoot and resolve networking issues, including wireless LAN, Ethernet configuration, and IP addressing. Perform system administration tasks, manage incidents/changes, and support applications on Windows platforms. Conduct basic network troubleshooting, including DHCP, DNS, and subnetting. Base Skill Set Required Proficiency in desktop/system administration, customer service, and technical troubleshooting. Hands-on experience with operating syst...
...Motherboard Design: A proprietary motherboard design tailored for Tiny Computers. Layout optimized for AMD-based CPU, Nvidia GPU, DDR4 RAM, and essential components such as storage and expansion slots. Considerations for power distribution, signal routing, and thermal management. PCB design, including schematic and layout, for manufacturing. Integrate necessary connectors for peripherals (USB, HDMI, Ethernet, etc.). 3. Heptalobe Screw and Matching Driver: A unique screw head design with seven symmetrical lobes, similar to Apple’s pentalobe screws, but with a distinct, proprietary design. A matching screwdriver design that is ergonomic and compatible with the heptalobe screw. CAD files ready for prototyping and manufacturing. Requirements: Proficiency in CAD software (e.g....
...electronics**. - Proficiency in embedded C/C++ programming. - Hands-on experience with microcontrollers and embedded systems. - Knowledge of battery management systems and protection mechanisms. - Expertise in hardware interfacing and debugging. **Preferred Skills:** - Familiarity with simulation tools (e.g., MATLAB/Simulink). - Experience with communication protocols (I2C, SPI, UART,STM32). - Background in display module interfacing for indicators. **Why Work With Us?** - Opportunity to showcase your expertise on a critical, innovative project. - Competitive compensation and flexible work terms. - Potential for long-term collaboration if we are impressed with the project outcome. How to Apply: Interested freelancers can share their updated resume and...
...entire house. The target devices are primarily smartphones, tablets, computers, and smart TVs. Key requirements and considerations: - Assess the current network hardware: I have some equipment but may need more. An evaluation of what can be reused and what needs to be replaced or added is necessary. - Implement a combination of wired and wireless solutions: Boosting the signal will require both Ethernet cables and WiFi extenders. - RF Engineering expertise: Given the challenge posed by the concrete and metal, an RF engineer's skills may be particularly beneficial. Ideal skills for the job include: - Networking and WiFi installation - RF Engineering - Ability to assess and optimize existing hardware - Proficiency with both wired and wireless solutions. Please recommend a...
...====================== DESCRIPTION ====================== The project will put all parts together in a 3D enclosure that will provide external access to the SD and the SIM cards, the Output ethernet connector. The Input ethernet cable will not be detachable. The components will be standard modules/breakouts, described at the end as OPTION-1 and OPTION-2. The project consists in: - Providing 3 of those modems, completely tested and fully functional. - Provide all schematics for the connections, the PCB containing the parts and the CAD for the enclosure. - Provide the Arduino code for testing the LEDs, GSM, DNS, Ethernet, RS232... etc. - Provide an Arduino demo example where the modem listens the TCP/IP traffic going across the switch and, when being requested (th...
I'm seeking a fre...industry will be beneficial. Ideal Skills and Experience: - Proficient in programming Delta PLCs - Extensive experience with DiaView SCADA - Background in the manufacturing industry - PLC programming certification is a plus - Strong problem-solving skills and attention to detail - Proficient understanding of Ladder Logic programming - Familiarity with communication protocols such as Modbus, Ethernet/IP - Experience with process automation in a manufacturing setting - Knowledge of data logging and retrieval in SCADA systems Your primary responsibility will be to program the Delta PLCs for the manufacturing processes and integrate them with the DiaView SCADA system for monitoring and control. Please provide examples of similar projects you have completed in...
I'm looking for a skilled developer with extensive experience in embedded systems and NFC application development on STM32. The hardware design has already been completed. The project involves a considerable amount of work (300-400 hours), focusing on: - Creating firmware for an STM32 microcontroller. - Implementing NFC application functionalities, specifically for data exchange and communication. The ideal candidate should have: - Proven experience in STM32 firmware development. - Proficiency in creating NFC applications. - Ability to adhere to specified project requirements and standards. - Knowledge of low-power design techniques for battery-operated systems. Please note, an NDA will need to be signed before the project starts. A brief interview will be con...
...directly at , applications NOT submitted through this site WILL NOT BE CONSIDERED or viewed. Virtual Receptionist's handles after hour phone calls, provides messaging and message dispatch services for Doctors, Lawyers, Funeral Homes, Plumbers and other professional service companies. Reliable Power & Internet a must. Newer Windows PC with at least 8 megs of RAM Available ethernet port on home router USB headset Availability is a must. Call Center is 24x7. Dependability & Reliability are a must. 8 hour shifts, 40 hour work week All Shifts are in Eastern Standard Time- Days 7am to 3pm, Evening 3pm to 11pmOvernight/Grave 11pm to 7am 1 weekend shift per week ( Sat / Sun ) is a must. Full Time & Part Time Available ( part time must work at least 3 days per week includ...
...○ Specify the Delta CP2000 VSDs and their settings for the pumps. ○ Justify your choice for controlling pump speed via PID control. ● SCADA (Supervisory Control and Data Acquisition) ○ Specify the VTScada Light package for visualization and control. ○ Justify your selection based on system needs and customer demo. ● Include any other required hardware or communication protocols (e.g., Modbus, Ethernet/IP, etc.). Solution Implementation 3. PLC Programming ● Provide a complete PLC program using the Delta AS200, including: ○ Automatic and manual control of the pumps. ○ Duty selection logic based on pump run times. ○ Interlocks, safety alarms, and process safeties. ○ PID control for maintaining process tank levels. ● Include comments and explanations to support the program. 4. VSD Co...
