Microcontroller labviewJobb
Need to implement 4 motorized faders using Atmega 328P to existing esp32 project. I'm looking for a professional skilled in embedded systems and motor controls. The task is to implement 4 motorized faders in an existing ESP32 project, using an Atmega 328P microcontroller. Key Requirements: - The motorized faders will primarily be used for audio mixing, so previous experience with audio-related projects could be beneficial. - The faders need to be synchronized with software, so proficiency in software integration is necessary. Ideal Skills: - Extensive knowledge of Atmega 328P and ESP32 - Experience with motorized faders - Proficiency in software integration - Background in audio mixing hardware would be a plus.
I'm seeking a skilled engineer to design and ...under-voltage trip, and over-current trip settings - Include resume and trip time delay timers The user interface will be simple and intuitive, utilizing push buttons for all settings. The system will feature four seven-segment displays, scrolling each ADC value one by one, with multiplexed segment LEDs for status updates. Ideal candidates should have: - Extensive experience with STM8S003 microcontroller - Proficiency in designing control systems - Familiarity with ADCs and LED multiplexing - Ability to create user-friendly interfaces Skills in programming and electronics are crucial for this project. Status updates could include: increasing, decreasing, trip, over-voltage, under-voltage, over-current, and mains on, toggling u...
I'm seeking an experienced instructor to create advanced-level video tutorials on Embedded Systems. Your content should cover key topics such as Real-time operating systems (RTOS), advanced microcontroller programming, and embedded system security. The Educational Engineering Academy (EEA) is seeking experienced instructors to create high-quality video tutorials across a range of technical topics. We are hiring for multiple courses, covering Embedded Systems, Data Analytics, ARM Programming, IoT, Automotive Technologies, and Linux Administration. Overview: Payment is based on the number of final video hours delivered. Applicants must submit a sample video (Google Drive link or file upload) explaining a mid-to-advanced embedded systems topic to demonstrate teaching and recor...
Vänligen Vänligen Registrera dig eller Logga in för att se mer information.
I'm seeking a professional with expertise in microcontroller boards to assist in the bring-up process of my hardware. STM32H743 running a open source OS
Vänligen Vänligen Registrera dig eller Logga in för att se mer information.
I'm in need of a PCB designer who can create a compact PCB for prototyping purposes. This board will need to accommodate a microcontroller, various sensors, a power supply, and Bluetooth components. Specifically, I want to gather data from a sensor (e.g. thermometer) and send that data via Bluetooth to a receiving device (iPad). The PCB will need to be powered by a 3.7 LiPo battery. I'll need all the files, so I can print at PCBWay. The board will need to be no larger than 26 mm by 30 mm. The components will need to lay flat on the board so the overall height is less than 4mm. Ideal Skills: - PCB design - Knowledge of compact design principles - Experience with prototyping PCBs Please, only apply if you have significant experience in designing PCBs, particularly for pro...
...is correct, and whether there is a better protocol available. My current level of knowledge has led me to conclude that BLE transmitted using the benefits of the architecture will allow for multiple incoming communications in real time to the computer (or a microcontroller connected to the computer). The initial application intention is 3 balls, each with a 9 DOF IMU (Direction of Freedom Inertial Measurement Unit), and 4 FSRs (Force Sensitive Resistors) (13 variables). My mock up so far has used the Adafruit nRF52840 microcontroller with the BNO055. I have been successful with reading values from the sensor, and with basic transmission (essentially UART with BLE). My understanding is using the capabilities of BLE architecture I will get reduced latency compared to my cu...
Arduino Microcontroller Code for Multi-Floor Lift/Elevator System We are seeking an experienced Arduino developer with prior expertise in designing and implementing multi-floor lift/elevator systems for commercial or professional applications. The ideal candidate should have a **ready-to-use, tested, and proven program** suitable for deployment. Requirements: - Working Code: Must have a functional Arduino program for a multi-floor elevator/lift system. - Experience: Preference will be given to candidates with prior implementation in professional or commercial projects. - Urgency: Immediate availability and readiness to provide the solution on an urgent basis. - Documentation: Clear documentation of the program, including setup and configuration. - Hardware Knowledge: Familiarity w...
... Working prototype is to be supplied by designer. Supply of all prototype components by designer. Timeline: Submission of schematic, PCB design, and BOM: 2 weeks from project start. Fully assembled prototype delivery: 4 weeks from project start. Tender Submission Requirements Experience: Provide examples of similar low-cost electronics projects. Demonstrate expertise in PCB design, microcontroller programming, and solar power systems. Technical Approach: Describe the approach to achieve cost optimization and robustness. Highlight any proposed innovations or enhancements. Quotation: Detailed breakdown of costs for design, prototyping, and documentation. Development Timeline: Include a timeline with key milestones and deliverables. Evaluation Criteria Cost-effective...
I'm seeking an expert in PCB and hardware design for a specialized microcontroller project. There will be a defined board layout and initial choice of components. All boards you design shall have evluation board quality. It means that they will not actually go into real components and be used for internal purposes only. Ideal Skills: - Extensive experience in PCB and hardware design, including power supply, FTDI, UART, CAN, SPI/QSPI and I2C - Microcontroller and Microprocessor layout experience, especially industry-grade controllers like NXP, STM32, Renesas and Raspberry Pi CM - Knowledge about signal integrity, EMC and good design practices in general Requirements - all parts must be available and recommended on Mouser or Digikey - no China replicas - all design mus...
I need a C language expert to write simple programs for Jieli MCUs AD142A4 or AC6082A2 microcontroller units (MCUs). The primary function of these programs will be controlling an LED blinking , and read digital inputs (just basic programs) The scope includes: - Writing C programs for both types of MCUs - Implementing control systems for LED blinking Skills and experience required: - Proficiency in C programming - Experience with Jieli MCUs, specifically AD142A4 or AC6082A2
I'm in need of a professional with extensive experience in PCB design, particularly using Altium Designer. The primary requirements for this project include: - Developing a PCB layout design tailored for through-hole components. - Utilizing Altium Designer for the design process. - The specifics of the PCB's function and component types will be provided u...Developing a PCB layout design tailored for through-hole components. - Utilizing Altium Designer for the design process. - The specifics of the PCB's function and component types will be provided upon selection. Ideal candidates should have a strong portfolio of previous PCB design projects, particularly with Altium and through-hole components. Understanding of power supply, signal processing, and microcontroller...
I'm seeking a skilled programmer and circuit designer to help create a home security system using a Raspberry Pi. Key Requirements: - Programming the Raspberry Pi to facilitate automation and control tasks. - Designing a cir...cameras. Main Components: - Cameras and video recording: The system should be able to capture footage and potentially stream it. - Sensors and alarms: Integrating motion detectors, door/window sensors, and alarms is crucial. - Remote access and control: The system needs to be controllable and accessible from a remote location. Ideal Skills: - Proficient in Raspberry Pi programming and microcontroller programming. - Experience with circuit design. - Familiarity with wireless sensor communication. - Knowledge in designing home security sys...
I am looking for a person to make a firmware external loader for the STM32G491RE microcontroller. The external loader should work in QSPI mode with W25Q128 memory. Development environment: STM32CubeIDE 1.17.0 or later. Programmer/debugger: ST-LINK-V2. Język programowania: C Biblioteki: HAL Note! I tested the external loaders available on the Internet. If I use classically Init(), Erase(), Write() functions work correctly. But the external loader with these functions does not want to work. Probably it is a problem of STM32CubeIDE configuration or or GDB server or ST-LINK. I do not have relevant experience. I am looking for someone who is able to make a loader for this particular configuration.
I'm seeking a microcontroller specialist to assist with an ultrasonic speaker application primarily for sound transmission. This project will also involve PCB production. Key Responsibilities: - Design and implement an ultrasonic speaker system primarily for sound transmission. - PCB design and production for the system. - Utilize a microcontroller for system control and operation. Ideal Candidate: - Extensive experience with microcontroller-based projects. - Proven track record in designing and producing PCBs. - Knowledge in ultrasonic technology and sound transmission. - Ability to work independently and deliver high-quality work on time.
Vänligen Vänligen Registrera dig eller Logga in för att se mer information.
I'm looking for an expert in embedded software development for a microcontroller-based system. STM32H series based Experience with EKF controller software is preferred Able to port drivers wherever required Follow the guidelines for C/C++ Prefer someone who can use AI tools to develop code rapidly
I'm looking for an electronics engineer or someone familiar with MikroC, PIC programming, and Proteus software. I need a simple task completed where you will program a 12F675 PIC microcontroller to generate a PWM signal to control an LED brightness with two push buttons. Key Requirements: - You will receive a Proteus file with a simple schematic. - Your task will be to program the PIC in MikroC to adjust LED brightness based on button presses. - The code should include basic comments explaining each section. - The PWM signal will need to be set within a specific duty cycle range. Please note that if the job is successfully completed, you will receive your payment. If it fails, no payment will be made. The job is straightforward for someone with programming experience, which...
...an experienced developer to create a Microcontroller based main board & write the software for me. Key Project Specifications: - The board should feature a 2 channel ADC for precision temperature measurement from Type K, R and S type thermocouples. - I prefer the use of the STM32 microcontroller family for this main board. - Communication interfaces supported by the main board should include I2C, SPI, UART, ADC, RS485, and RTC. Deliverables Expected: 1. Three fully assembled and programmed PCBs ready for testing. 2. Complete source code for the project. 3. Schematic and Gerber files, including a pick and place file for PCB assembly. 4. Bill of Materials (B.O.M.) with vendor information. Ideal Skills and Experience: - Proficient in STM32 microcontroller progr...
I'm in need of an...strong background in AVR microcontroller programming. My current project utilizes the ATmega 1284P microcontroller, and the development environment is CodeVision AVR. Key tasks will include: - Debugging and troubleshooting: I need someone who can effectively identify and solve issues in the code. - Code optimization: While I primarily focus on debugging, I also value someone who can enhance the performance of the code. You will have access to: - Detailed Documentation: I have comprehensive documentation for the project available for you. Ideal candidates will have: - Extensive experience with Embedded C and AVR microcontrollers. - Proficient skills in debugging and optimizing code. - Previous experience working with CodeVision AVR and the ATmega ...
I'm looking for a skilled hardware designer to create a board for the STM32L031K6 microcontroller. The board will be used for prototyping, and needs to be compatible with the ST-Link V2 programmer. Key Requirements: - The board should include GPIO pins and Analog inputs/outputs. - The power source for the board will be USB, so it needs to be designed accordingly. Ideal Skills and Experience: - Extensive knowledge and experience in hardware design, particularly with STM32 microcontrollers. - Familiarity with ST-Link V2 programming. - Ability to design for USB power supply. - Good understanding of GPIO and Analog inputs/outputs. I need a professional who can ensure the board is designed efficiently for prototyping purposes.
I require a comprehensive academic explanation, description, and logical workflow of my LabView code. The final document should be between 12,000 and 24,000 words, meticulously written in an academic style suitable for graduate students. Key Aspects to Cover: - Detailed breakdown of algorithms and logic - In-depth analysis of user interface design - Comprehensive review of data handling and processing - Any other relevant code aspects The document should include: - Citations to support statements - Detailed explanations for each step of the logic - A blend of high-level overviews and step-by-step detailed explanations Ideal Skills and Experience: - Strong background in LabView - Exceptional academic writing skills - Experience writing for a graduate-level audience - Abil...
I am looking for a seasoned professional with extensive experience in embedded software development, particularly focused on real-time processing. The primary task will be to develop embedded software for a microcontroller-based device. Ideal skills and experience: - Proficient in embedded software development with a focus on real-time processing. - Extensive experience working with microcontrollers. - Skilled in software testing and configurations. - Background in electrical and mechanical design. Please provide examples of similar projects you've completed.
Estoy buscando un profesional que me ayude a perfeccionar mi proyecto de LabVIEW. El enfoque se centrará principalmente en: - Optimización del rendimiento: el proyecto actualmente tiene algunos problemas de rendimiento que deben abordarse. - Mejoras de la interfaz de usuario: la interactividad de la interfaz de usuario necesita algunas mejoras. - Monitoreo de datos: esta es una parte crucial del proyecto. Necesito mejorar los controles de usuario y los gráficos en tiempo real para el monitoreo de datos. El profesional independiente ideal para este trabajo sería alguien con amplia experiencia en LabVIEW, particularmente en la optimización del rendimiento y la mejora de la interactividad dentro de la interfaz de usuario. Las habilidades pa...
I am in need of a microcontroller expert who can convert my current setup (ESP32, SIM800L, Neo6M GPS) into a more compact design using the STM32G030F6P6TR chip and embed it with a SIM868. The goal is to create a compact, efficient, and versatile tracking device. Responsibilities: - Convert the existing microcontroller setup to an STM32G030F6P6TR chip. - Embed the design with the SIM868 for enhanced functionality. - Design a PCB that accommodates this compact design without compromising performance. - Ensure the device is suitable for both indoor and outdoor use. The device needs to support real-time tracking functionality. Therefore, experience in designing tracking devices is preferred. Please note, I require only qualified professionals to bid on this project. Proposals...
I'm looking for a seasoned professional with hands-on experience in both hardware and software aspects of the WM8904 Audio Codec. The goal is to seamlessly integrate this codec with the LPC55S69 NXP Microcontroller for audio playback directed to speakers in a consumer electronics setup. Ideal Skills and Experience: - Profound knowledge of WM8904 Audio Codec - Extensive experience with LPC55S69 NXP Microcontroller - Hardware and Software integration skills - Expertise in audio playback systems for consumer electronics - Familiarity with speaker output systems
Job will be to program a small capacitive IPS, TFT LCD touch screen controller to a remote 12-channel relay board. UART2: TTL/CMOS. communications. There is software available for the small 2.1 inch touchscreen and menu icons, and to assist in firmware. The relay board would prefer to utilize Raspberry Pi Arduino and use pre-configured circuit board. for 12v relay outputs. The outputs will be controlled by the touch screen controller's selection icons and menu's. The conclusion is to have a circular touchscreen controller with visible picture/icons that will: 1) push to activate an ignition relay. 2) Menu's to activate all additional relays on/off functions with picture icons for each selected choice. Price: $50-100
I'm seeking a skilled professional to assist with integrating my Guition ESP32-S3-4848S040 board into SquareLine Studio for the Arduino IDE. The ultimate goal is to produce a complete set of files ... Additional information about the board: I am looking for a fully functional set of files for SquareLine Studio that meet the requirements outlined below: Ideal Skills and Experience: - Proficient in C/C++ programming - Experienced in Microcontroller Hardware Configuration - Familiar with LVGL and GUI Development - Skilled in Library Debugging and Customization - Prior experience with SquareLine Studio Integration is highly desirable
I'm in need of a compact, battery-powered camera module and custom built microcontroller designed for eye-tracking. This module should: - Operate in infrared wavelengths - Connect to a small, custom-built microcontroller - Support wireless streaming of the camera feed - Provide 1080p quality video without auto-focus The camera will be situated near the eyes, so size and weight are critical considerations. The wireless communication protocol for this project is Wi-Fi, and the power source is a battery. Ideal candidates will have experience with camera module design, microcontroller integration, and wireless technology. Please note, the primary application for this camera has not been specified yet, so flexibility and adaptability will be key.
...Project Requirements: 1. PCB Circuit Design: o Design the schematic circuit diagram for the Smart Tree Pot. o Integrate sensors for soil moisture, temperature, light to monitor plant conditions. o Design an expression display system to show visual feedback (70+ different expressions). o Include a microcontroller for handling sensor data and controlling the display. o Power management: Battery operated and C-type option. 2. Firmware Development: o Develop firmware for the microcontroller to process sensor data and determine which expression to display based on real-time environmental factors. o Implement expression logic for over 70 unique expressions that reflect different plant conditions (e.g., happy, thirsty, too hot, etc.). o Integrate a user interface (vi...
I'm creating a Motor Operating Valve (MOV) and need a professional to design the PCB and develop embedded software for it. Ke...Operating Valve (MOV) and need a professional to design the PCB and develop embedded software for it. Key Requirements: - PCB Design: The PCB design should accommodate 20 Digital Inputs and 10 Digital Outputs. - Embedded Software Development: I need an expert to develop the required embedded software for the microcontroller. The software should be able to efficiently control the fluid flow through the MOV. Ideal Candidate: - Experience in PCB design, especially with microcontroller-based projects. - Proficiency in embedded software development, ensuring smooth operation of the MOV. - Prior experience with fluid control systems would be a pl...
I'm seeking a skilled professional to assist with integrating my Guition ESP32-S3-4848S040 board into SquareLine Studio for the Arduino IDE. The ultimate goal is to produce a complete set of files ... Additional information about the board: I am looking for a fully functional set of files for SquareLine Studio that meet the requirements outlined below: Ideal Skills and Experience: - Proficient in C/C++ programming - Experienced in Microcontroller Hardware Configuration - Familiar with LVGL and GUI Development - Skilled in Library Debugging and Customization - Prior experience with SquareLine Studio Integration is highly desirable
...communication modules) remain off or in low-power mode. Motion Detection: A PIR sensor detects motion and sends a signal to the management microcontroller. The microcontroller activates the corresponding camera and wakes up the Coral Dev Board Micro. Image Capture and Processing: The camera captures an image or sequence of images and sends it to the microcontroller. The microcontroller transmits the data to the Coral for real-time inference. Object Identification: The Coral analyzes the images using AI models (TensorFlow Lite) to detect objects included in a predefined "blacklist." Data Transmission: If an object of interest is detected: The microcontroller activates the configured communication module (Wi-Fi, LoRaWAN, or 4G/LTE). Alerts ...
...systems. Key Responsibilities: - Conducting a technical skills interview focused on functional testing of automotive components and systems. - Evaluating the candidate's proficiency in using automotive testing tools such as CANoe, NI LabVIEW, and MATLAB/Simulink. - Assessing the candidate's understanding and knowledge of important automotive industry standards and regulations like ISO 26262 and SAE standards. Ideal Skills: - Expert-level knowledge and experience in functional automobile testing. - Proficient in using automotive testing tools (e.g., CANoe, NI LabVIEW, MATLAB/Simulink). - In-depth understanding of automotive industry standards and regulations. - Knowledge of other specific regulations in the automotive industry. - Ability to conduct an interview ...
I'm looking for an embedded system expert to design a hardware for industrial automation. Key Requirements: - Design an embedded system - Incorporate a microcontroller - Optimize for industrial automation applications Ideal Skills: - PCB design - Embedded system design - Microcontroller programming - Understanding of industrial automation needs - Experience in designing for durability and reliability
I'm seeking a skilled professional to assist with integrating my Guition ESP32-S3-4848S040 board into SquareLine Studio for the Arduino IDE. The ultimate goal is to produce a complete set of files ... Additional information about the board: I am looking for a fully functional set of files for SquareLine Studio that meet the requirements outlined below: Ideal Skills and Experience: - Proficient in C/C++ programming - Experienced in Microcontroller Hardware Configuration - Familiar with LVGL and GUI Development - Skilled in Library Debugging and Customization - Prior experience with SquareLine Studio Integration is highly desirable
I'm looking for an expert in PCB and hardware design to help me create a development board. The PCB will need to integrate a Nordic nRF microcontroller and various sensors. Ideal candidate should have: - Extensive experience in PCB design and hardware prototyping. - Proficiency with integrating microcontrollers and sensors onto PCB. - Familiarity with Nordic nRF microcontroller. - Ability to design for robust, consumer-grade applications. - Familiarity with Analog Devices Sensors.
...pump controller that can detect both ground and overhead water levels. This system should also monitor current and voltage, and control reserve water. Key Features: - Compatibility with single or three-phase pumps and power starters, up to 30amp switching. - Utilization of a microcontroller, specifically the ESP32 WROOM. - Incorporation of an OLED display, with a manual toggle switch. - Implementation of water level detection via the water conductivity method. Ideal Skills and Experience: - Proficient in microcontroller programming, particularly with ESP32. - Previous experience designing water pump controllers. - Understanding of water conductivity level detection. - It is capable of working with OLED displays and toggle switches. - Knowledge of single and three-phase s...
I'm seeking an experienced firmware developer and PCB designer who can assist with a mixed-signal circuit design project. The focus will predominantly be on firmware development. Key Responsibilities: - Develop firmware for a mixed-signal circuit using STC or any suitable microcontroller for LED control. - Collaborate on the design and layout of the PCB. - Contribute to the overall circuit design. Ideal Skills: - In-depth knowledge of firmware development. - Extensive experience in designing mixed-signal circuits. - Proficiency in PCB layout and design. - Familiarity with STC and other microcontrollers. - Understanding of analog and digital components.
...Arduino IDE, and TensorFlow Lite for Microcontrollers (TinyML) to convert and deploy an existing ML model onto an Arduino ESP32. The model processes Gyroscope and Accelerometer data to detect Freezing of Gait (FoG) in Parkinson's Disease patients. Key Tasks: - Convert the provided Python ML Code into C/C++ compatible with Arduino IDE - Implement data processing and model inference logic on the microcontroller - Use TensorFlow Lite for Microcontrollers to convert and deploy the ML model Ideal Skills: - Proficient in Python and C/C++ - Extensive experience with Arduino IDE and Arduino ESP32 - Knowledgeable in TensorFlow Lite for Microcontrollers - Understanding of Machine Learning concepts and algorithms - Familiar with Gyroscope and Accelerometer data processing Note: The ...
I'm looking for a skilled circuit designer with expertise in PIC Microcontrollers and RTD temperature sensors. Key Responsibilities: - Design a circuit for a temperature indicator using a PIC Microcontroller and an RTD sensor. - Implement adjustable calibration features. - Incorporate an LED display for temperature readings. Ideal Skills: - Proficient in circuit design and microcontroller programming. - Experience with RTD temperature sensors and LED displays. - Ability to design for adjustable calibration.
I'm seeking an experienced electronics engineer to design a circuit schematic and PCB for a marine digital device. This project involves integrating various components and ensuring the power requirements are met. Key Responsibilities: - Design a circuit schematic and PCB for several devices - Integrate a microcontroller, sensors, wireless modules, and relays into the circuit. - Ensure the circuit is compatible with a 12/24v DC power supply. Ideal Skills and Experience: - Proficient in circuit design and PCB layout software. - Previous experience with designing device circuits for harsh operating environments - Strong understanding of microcontrollers, sensors, wireless modules, and relays. - Ability to design for specific power requirements.
I'm seeking a skilled engineer to assist in constructing a prototype for an interactive game tool featuring an electrical buzzer/b...components - Building a rugged prototype Ideal Skills and Experience: - Electrical engineering - Good knowledge of CAD software - Prototyping for interactive games/products - Experience with LED indicators, sound modules and buttons - Creativity in designing game tools The prototype should be battery-powered. The prototype should be designed as a tabletop device. The prototype should utilize a microcontroller-based control system. The prototype will be used in both indoor and outdoor environments. The prototype should be designed to be hand-held in size. Use a basic sound module that produces simple beeps or tones. The device casing should be m...
I am looking for someone to set up an IOT system. It will involve a temperature & moisture sensor, 40 or 150 kHz ultrasonic transducer, vibrating wire strain gauges, and electrical resistivity measurement (LPR-like) over a steel bar. All the sensors should be wired to a single microcontroller, which is then connected to a device (a computer) for data collection. I will provide more information and have more discussion with those who are interested. The project is expected to take 1 week to 1 month maximum once we finalized the component, and I am hoping to get an estimated range of price lump-sum.
...systems. Key Responsibilities: - Conducting a technical skills interview focused on functional testing of automotive components and systems. - Evaluating the candidate's proficiency in using automotive testing tools such as CANoe, NI LabVIEW, and MATLAB/Simulink. - Assessing the candidate's understanding and knowledge of important automotive industry standards and regulations like ISO 26262 and SAE standards. Ideal Skills: - Expert-level knowledge and experience in functional automobile testing. - Proficient in using automotive testing tools (e.g., CANoe, NI LabVIEW, MATLAB/Simulink). - In-depth understanding of automotive industry standards and regulations. - Knowledge of other specific regulations in the automotive industry. - Ability to conduct an interview...
...developing microcontroller-based automation control systems. This includes designing and manufacturing prototypes, including printed circuit boards (PCBs), and integrating various electronic components such as microcontrollers, sensors, and connectors for enabling communication. Key Requirements: - Design and manufacture microcontroller-based systems for automation control. - Integrate sensors and communication modules into the system. - Experience with designing and manufacturing PCBs. - Develop firmware for microcontroller-based systems. - Ability to undertake rapid prototyping of electronic systems. - Perform rigorous testing and validation of prototypes. - Design custom components tailored to specific project needs. Ideal Skills and Experience: - Expertise in ...
...systems. Key Responsibilities: - Conducting a technical skills interview focused on functional testing of automotive components and systems. - Evaluating the candidate's proficiency in using automotive testing tools such as CANoe, NI LabVIEW, and MATLAB/Simulink. - Assessing the candidate's understanding and knowledge of important automotive industry standards and regulations like ISO 26262 and SAE standards. Ideal Skills: - Expert-level knowledge and experience in functional automobile testing. - Proficient in using automotive testing tools (e.g., CANoe, NI LabVIEW, MATLAB/Simulink). - In-depth understanding of automotive industry standards and regulations. - Knowledge of other specific regulations in the automotive industry. - Ability to conduct an interview...
