Labview pic microcontrollerJobb

I'm looking for a skilled MP lab programmer...MP lab programmer to assist with programming a PIC microcontroller. The project involves implementing multiple functionalities, including sensor interfacing, communication protocols, and motor control. Key Requirements: - Extensive experience in microcontroller programming, specifically with PIC. - Proficient in sensor interfacing, communication protocols, and motor control. - Ability to understand and execute complex programming tasks. - Strong problem-solving skills for potential debugging and testing challenges. Your task will primarily be focused on microcontroller programming, with the possibility of needing to debug, test, and develop firmware. The project will involve programming, debugging, and...

My website My Wix website is a bit outdated, and I’m looking to refresh it with a focus on my acting work. Here’s what I’d like: 1. Header and About Me Page • A clean and simple header featuring just my name at the top of the website. • An “About Me” page added, featuring a photograph of my choosing and a brief bio.( in the dropdown menu ( I have the pic and bio written) 2. Main Page Layout • Keep my current photographs in a gallery format, where users can scroll through the images, but add a small “Gallery” heading above this section. • Below the gallery, I’d like to showcase all my film work and commercials laid out one under the other (no horizontal scrolling menus). 3. Navigation and Contact • A...

Need weapon/gun removed from pic. And also make the guy look even better.

I'm looking for a skilled developer with extensive experience in embedded systems and NFC application development on STM32. The hardware design has already been completed. The project involves a considerable amount of work (300-400 hours), focusing on: - Creating firmware for an STM32 microcontroller. - Implementing NFC application functionalities, specifically for data exchange and communication. The ideal candidate should have: - Proven experience in STM32 firmware development. - Proficiency in creating NFC applications. - Ability to adhere to specified project requirements and standards. - Knowledge of low-power design techniques for battery-operated systems. Please note, an NDA will need to be signed before the project starts. A brief interview will be conducted, along ...

Complete photos of the skypark building, both tower 2, 15th floor with the company name signs 9n that floor including photos of the route name sign. Also screenshot of the exact location on GPS. Since they had not given me good details at the beginning and I had to return to the place, I charged him $20. I hope for your understanding and acceptance.

I'm looking for an embedded systems expert who can program a Nuvoton microcontroller for a domestic use Voltage Ampere Meter. Requirements: - The meter should enable real-time monitoring of voltage and current. - It should come with a digital display to show the readings. Ideal Skills: - Proficiency in Nuvoton programming. - Experience in designing and programming embedded systems for domestic appliances. - Knowledge in creating systems for real-time monitoring. Please use an LED for the digital display.

Site visit with pics task in Budapest to confirm address . Address: 1052, Budapest, 11-13 Semmelweis Utca Task : 1. Confirm with building name and number board pic 2. Building full view pic 3. Street sign Name board pic 4. Building pic - street view

I need a skilled LabVIEW programmer to develop a program for a dual-axis load cell. The program should provide real-time force data, visualizing both raw data and graphical plots. The data will need to be easily exportable to Excel for further analysis. Key requirements: - Proficient in LabVIEW programming - Experience with dual-axis load cells - Ability to create real-time data visualization - Knowledge of data export to Excel Please include in your bid examples of similar projects you've completed.

I need a skilled developer for a project based on the STM32F407 microcontroller. The primary goal is to implement a PID control system for managing motors. Key Responsibilities: - Design and implement a PID control system using the STM32F407. - Interface the microcontroller with motors effectively. - Integrate sensors to provide feedback for the PID control system. Ideal Skills and Experience: - Extensive knowledge and experience with STM32F407. - Strong background in control systems, specifically PID control. - Proficiency in embedded systems programming. - Experience with motor interfacing.

I need a LabVIEW program that will work with a load cell equipped with extensometers. This program should be capable of acquiring and reading force data in both the x and y directions. Key Features: - Real-time data visualization: The program should send data to Excel for real-time graphing. The format in Excel should be a bar chart. - Raw data transmission: The LabVIEW program should send raw data to Excel without any pre-filtering or processing. Ideal Skills: - Extensive experience with LabVIEW programming - Proficiency in data handling and visualization in Excel - Understanding of load cells and extensometers

I am looking for a skilled PCB designer to help create a circuit board for an interactive learning toy. Key Features: - The PCB should support audio playback, LED lights, and touch sensors - The primary power source will be batteries - The PCB should incorporate a microcontroller to handle complex tasks and process inputs from sensors and buttons. - The PCB should include a USB port for charging the device or for software updates and connectivity. - The PCB should have integrated battery management to enhance battery life and provide safe charging if rechargeable batteries are used. Ideal Skills: - Experience in PCB design for toys or similar electronic devices - Understanding of integrating features like audio, lights, and sensors - Knowledge of power management for battery-opera...

Pro...standard microcontroller or a platform like Arduino, Raspberry Pi, or ESP32. Real-time Processing: Ensure low-latency data processing and accurate input detection. Documentation: Provide clear documentation on how the code works and how to integrate the device. Nice-to-Have: Experience with reverse-engineering CAN bus signals. Ability to filter and isolate relevant signals from background CAN bus chatter. Experience with mobile app integration for displaying detected inputs. Deliverables: Complete, functional code ready to upload to the microcontroller. Instructions for setup and testing the device in a vehicle. Support during the testing phase to ensure functionality. Payment: Negotiable based on experience and deliverables. The code will be developed for an Arduino...

Vänligen Vänligen Registrera dig eller Logga in för att se mer information.

I need an image of my dog's face rotated to be facing forward. The image is an iPhone pic and requires a custom rotation angle. Ideal Skills and Experience: - Proficient in image editing software - Attention to detail - Able to follow specific instructions The dogs face on the picture where we are standing up to be put on the dogs face where we are sitting down. The final image should be in JPEG format.

I'm looking to enhance my Android Studio APK with an on/off button that controls a BLE device connected to an STM32L401. The button should activate the performance mode of the device. Key Requirements: - Proficient in Android Studio - Experience with BLE (Bluetooth Low Energy) devices - Knowledge of STM32L401 microcontroller - Ability to implement control buttons in an APK - Understanding of different device modes, specifically performance mode Ideal freelancer would be someone who can work efficiently and deliver a functional APK with the necessary control button. Please include in your bid relevant experience and examples of similar projects you've completed.

...anticipation is to grow from ground 0 up as a long-term trusted member as a contractor. Minimum Item Sale Price estimated at $20 - $50+, later expected items of $500 - $1000+. Next stage is to link a company website that shall be linked to Amazon as a partner. Retail sales initially, later to expand to wholesale. Required Skills / Tasks: - Available to list, communicate w/ customers as needed, arrange pic-up of goods to ship out internationally - Creative and Advanced Listings skills - Proficient in Excell Managment - Able to take professional and creative digital pictures - Proven experience with Amazon seller account - Understanding and proven SEO results - Knowledge of Amazon's listing requirements and best practices - Expertise in conducting keyword research to fin...

We are looking for a s...communicate seamlessly on STM32F429I-DISC1. Key Skills: Experience with STM32 microcontrollers, especially STM32F429 series. Knowledge of embedded C programming. Expertise in I2C and UART protocols. Familiarity with peripherals like RTCs, Bluetooth modules, and GPIO control. Previous experience with STM32CubeIDE and HAL libraries. Ability to debug and optimize embedded code. Project Details: Microcontroller: STM32F429I-DISC1 Peripherals: DS3231 RTC, HC-05 Bluetooth, Buzzer Communication Protocols: I2C (for RTC), UART (for Bluetooth) Deliverables: Fully functional code for integrating the components. Clear documentation on the project setup and configuration. Debugging and optimization for efficient operation. The project needs to be completed by December...

I'm seeking a skilled professional to design a PCB and firmware for a multichannel thermocouple registrator. Assumptions 1. PCB as small as possible, housing on our side 2. internal flash - approx. 4/8/16gb or other - please advise 3. buttons 3.1 START (recording) 3.2 STOP (recording stop) 3.2 LED light (indicating recording) 3.4 LED light (indicating low battery)...created 3. after pressing STOP, recording is finished 4. data format in the row "time from start HH:MM:SS; channel1; channel2; channel3; channel4; channel5; channel6; channel7; channel8;" 5. rounding the temperature to 2 digits after the decimal point Requirements 1. Code made using visual studio C++ / C# 2. BOM, Pick&Place, Gerber, PCB Project, Source files (Visual studio compatible) 3. STM microcontrol...

Hi, i would need someone to create a flyer that can be opened (see attached pic). I added a ppt with a rough mock up. Please add a collage. the pics are added, as well as the logo etc. I would need it pretty soon. thank you

I'm seeking a skilled professional for an embedded systems development project utilizing a microcontroller, specifically a Raspberry Pi. The project involves: - Creating an embedded system with specific functionality - Using the microcontroller for data processing, sensor interfacing, and communication protocols The Raspberry Pi will need to interact with: - Display screens - Other Raspberry Pi devices Ideal candidates should have extensive experience with microcontrollers and embedded systems. Skills in data processing, sensor interfacing, and communication protocols are essential. Experience in home automation and robotics will be an advantage. Please share your relevant portfolio.

I'm seeking a certified professional with 1-3 years of experience in IoT networking, microcontroller, programming, and cybersecurity/firewalls. The primary focus of this project is to implement proper safeguards and protocols for a secure and optimized network environment that meets regulatory compliance. Key Responsibilities: - Design and implement a secure IoT network - Utilize microcontrollers for network optimization - Apply cybersecurity measures to protect the network Skills and Experience Required: - Proven experience in IoT networking and microcontroller programming - Strong background in cybersecurity/firewalls - Certification and/or degrees in relevant fields Specific Requirements: - I have certain safeguards and protocols I wish to implement. Please contact...

...similar). Current monitoring for overload protection using sensors like ACS712. Safety features to reverse the motor direction when specific conditions are detected. Control and logic processing via a microcontroller (e.g., STM32 or equivalent). Additional integration of LEDs or other indicators for user feedback. Deliverables: Complete schematics for the device. PCB design and Gerber files for manufacturing. BOM with readily available components. Documentation and design notes for assembly. Optional: Support during prototyping and testing phases. Required Expertise: Proficiency in microcontroller programming and integration. Experience with motor drivers and power circuits. Knowledge of current sensing and safety feature implementation. PCB design using tools like Altiu...

I'm looking for an assembly language specialist with a focus on embedded systems development, specifically on the MIPS architecture. I need 2 hours tutoring in this subject Ideal Skills: - Proficiency in MIPS Assembly Language - Experience with embedded systems development - Knowledge of microcontroller programming

I'm in need of a color sensor that can be used outdoors. The key functionalities of this device are: - Sending data wirelessly to a Cloud server, specifically AWS. - Detecting and displaying colors. The ideal candidate for this project should have experience working with ESP microcontrollers and AWS. Proficiency in designing outdoor devices is highly desirable as well. If you have the required expertise and innovative mindset, I look forward to your proposal.

I have a picture that needs some professional editing. Specifically, I need more than 3 people removed from the image. Ideal skills for this project include: - Proficient in photo editing software, particularly Photoshop - Skilled in retouching and object removal - Excellent attention to detail I just want the bride and from in the middle with no one else in the pic.

I'm looking for an expert in C programming and embedded systems to enhance my existing firmware for the STM32F401CDU6 microcontroller. The firmware was developed using Keil uVision, and the enhancements will focus on adding UART communication capabilities. Key Tasks: - Integrate UART communication protocol into the existing firmware - Ensure the new firmware supports data transmission and reception via UART Ideal Candidate: - Proficient in C programming and embedded systems - Extensive experience with STM32 microcontrollers - In-depth knowledge of integrating communication protocols into firmware - Familiarity with Keil uVision - Able to deliver robust, efficient, and high-quality firmware enhancements

I'm looking for an expert STM32 programmer to help with my project. The microcontroller will be used for industrial control applications. Ideal Skills: - Proficient in C/C++ programming, particularly for STM32F series - Experience in programming for industrial control systems - Knowledge of relevant communication protocols - Familiarity with motor control and sensor data collection Please get in touch if you have the necessary skills and experience. Kindly people from Tamilnadu is better convenient for me.

I am looking for a skilled programmer for my STM32 microcontroller project. The main functionality of the STM32 will be to control a motor. Ideal Skills: - Proficient in STM32 programming - Experienced in motor control systems - Knowledgeable about various motor types Please note, the specifics of the motor type and whether the system will control multiple motors are yet to be determined.

I am in need of a proficient PCB designer for a multi-layer PCB intended for use in automotive systems. The PCB will need to incorporate a microcontroller, power supply units, and sensors. Ideal Skills and Experience: - Extensive experience in multi-layer PCB design - Prior work in automotive systems PCB design - Proficient in integrating microcontrollers, power supply units, and sensors into PCB layouts - Familiarity with industry standards for automotive electronics - Ability to deliver high-quality, reliable designs suitable for demanding automotive environments.

We need an expert Embedded C engineer with deep knowledge in AVR microcontroller programming, particularly with the ATmega 1284P using CodeVision AVR. The project involves debugging and enhancing our current firmware and implementing specific features or modifications as required. Key Responsibilities: - Fix existing bugs, primarily related to memory management - Collaborate with our team to test and validate solutions - Enhance firmware to improve performance and reliability - Optimize existing code to improve performance and reduce footprint Ideal Skills: - Proficient in Embedded C and AVR programming - Experience with ATmega 1284P microcontroller - Familiarity with CodeVision AVR software - Strong debugging skills, particularly with memory management issues Enhancements...

i need a report of 10 pages aimed to discuess an expermint of assembling and running one of Arduinos robots, a car robot. the report should: 1) Describe the assembly stages for this robot. 2) Describe the different stages needed to interface the robot with the microcontroller and the laptop. 3) Describe the experiments conducted using the ultrasonic sensor. Explain the results. 4) Briefly describe the behaviour of the tested navigation algorithms based on your observations during program execution. 5) Relate the algorithms tested on your robot to the navigation algorithms presented as part of the lecture course. Explain what the differences are between your algorithms and those presented in class (if there are any). Discuss limitations of your algorithms. This is a chance to explain...

I'm looking for a PCB layout expert who can layout a two-layer PCB for an Atmel microcontroller. This PCB will be used in an embedded system. Ideal Skills and Experience: - Proficient in EasyEDA Pro PCB design software - two layer board - Previous work with PCB layouts for microcontrollers - Knowledge on design considerations for embedded systems

I'm in need of a 3-way air duct designed exclusively in OpenSCAD. The final deliverable should be a .scad file. The air duct must have independently adjustable dimensions for each side, and accommodate mounting holes for 40mm, 60mm, 80mm, 120mm, and 140mm fans. Key Requirements: - The code should allow for modification of dim...design must fit within a Prusa Mini print volume or be easily mountable together. - All mounting holes should be appropriately sized for the specified fans. Ideal candidates should have extensive experience with OpenSCAD, 3D modeling, and a strong understanding of designing for 3D printing. Please note, I will not be accepting any proposals that include 3D models outside of OpenSCAD code. an pic is here to show an 3 way airduct that id like and the ...

You will design an app icon for an iPhone app: AI Headshot generator, that uses AI to convert regular selfie photos into professional looking headshot photo. The photo can used for linkedin profile pic, resume pic or any other professional usecase. Icon should be flat, minimal, but can be colourful and glossy. The final deliverable should be 1024 by 1024 pixels png format and also the source file you created to make this icon (like psd, ai, figma or any other format). The app icon should have a square shape, not with rounded corner. This is our current app icon:

I'm looking for an expert in Arduino and LabVIEW to develop a smart plant watering system using the components I have. The system should have both automatic and manual modes, with a local and a web-based HMI for monitoring and control. Key Features: - Automatic Mode: The system waters the plant when soil moisture drops below a set threshold. - Manual Mode: Users can manually initiate watering through the HMI. - Local HMI (LabVIEW): This should display real-time soil moisture, temperature, and humidity data, allow mode switching, and setting of moisture thresholds. - Web-Based HMI: This should provide remote monitoring and control over a local network. - Environmental Monitoring: Using the DHT11 sensor for temperature and humidity. The successful candidate should have: ...

...target tracking models. Simulation and Analysis: MATLAB/Simulink: For sensor data analysis and simulation of tracking systems. ROS (Robot Operating System): For managing sensor integration and communication. Sensor Tools: LidarView or Point Cloud Library (PCL): For LiDAR data processing and analysis. RTKLib: For advanced GPS calibration and positioning accuracy. Testing and Validation: Tools like LabVIEW for real-time data validation and sensor testing. Oscilloscopes and multimeters for hardware-level calibration. Skills and Expertise AI and Image Processing: Expertise in designing AI models for target detection and tracking. Strong understanding of optical and thermal imaging systems. Sensor Integration and Calibration: Hands-on experience with IMU, GPS, and LiDAR calibration te...

...design and prototyping. LTspice: For simulating electronic circuit behavior. Power System Analysis: PSpice: For power system modeling and simulation. MATLAB/Simulink: For analyzing and simulating power distribution networks. Embedded Systems and Firmware: Arduino IDE or Keil: For testing microcontroller-based systems. Python or C: For developing control algorithms and testing hardware-software integration. Testing and Measurement Tools: Oscilloscopes, multimeters, and logic analyzers for circuit validation. LabVIEW: For automating hardware testing and data collection. Skills and Expertise Electrical Engineering: Strong knowledge of power electronics, circuit design, and PCB development. Experience with voltage regulation, load balancing, and safety protocols. Sensor Integr...

Need this pic recreated for a Tshirt and sticker. Want it to match as close as possible. Ty

Hi Emdyarts, I need a design for 2-3” sticker. Need this pic turned black k and white with Attitude of gratitude with it.

I'm looking for a skilled professional with expertise in LabVIEW VI to create a system for automating control related to blood sugar management. The project is focused on: - Developing a LabVIEW VI for control systems automation in the context of blood sugar control. - it should have a PID controller. - provide explanation for the connection. The ideal candidate should have significant experience in LabVIEW VI development and control systems automation, with a strong understanding of blood sugar control mechanisms. Previous work with similar health-related control systems would be advantageous.

I need assistance with a LabVIEW 2021 and above project. The task involves selecting a DWG file from a specified folder and displaying it within the LabVIEW user interface. The DWG files will be shown as an image and do not require any manipulation or editing within the interface. Ideal Skills and Experience: - Proficient in LabVIEW 2021 or later - Experienced with DWG file handling - Able to create user-friendly interface - Knowledge of image display in LabVIEW

PROJECT DESCRITPOIN I NEED TO SCRAPE SOME DATA FROM .. AND PUT IN AN EXCEL . DATA NEEDS TO REFRESH EVER 1 HOUR. THE DATA I M LOOKING TO SCRAPE IS: - NAME - TYPE - PETROL OR DIESEL - YEAR - PRICE - TAGGED AS ' WELL BELOW MARKET PRICE' I ONLY WANT CARS THAT ARE TAGGED AS ' WELL BELOW MARKET PRICE' (see pic) THE DIFFICULT OF THIS JOB IS THAT THIS SITE HAS MANY BLOCKERS...AND ROBOTS ( I SEE ONE AT PAGE 4) SO GETTING DATA IS QUITE DIFFICULT. it will need captcha or puzzle solver api LET ME KNOW IF YOU ARE CERTAIN YOU CAN DO IT

I am seeking a programmer with expertise in the ESP32-S3 microcontroller to help control various peripherals on a PCB. The microcontroller will be responsible for managing the emission of a scalar field, including frequency and timing. Key Responsibilities: - Program the ESP32-S3 for appropriate control functions - Ensure synchronization of scalar field emission - Optimize control for various PCB peripherals Ideal Skills: - Proficient in ESP32-S3 microcontroller programming - Experience with PCB peripheral control - Knowledge of scalar field emission and timing - Familiarity with frequency modulation

I'm seeking a skilled programmer to create code for the STM32 Blue Pill microcontroller to control a 2x16 LCD using both baremetal and the HAL library. Key Requirements: - The code must interface with the LCD over a 4-bit connection. - The LCD will be used for write only operations. - The programmer must be experienced with STM32 development and LCD control.

...hardware components, including motors, sensors, and control interfaces. Testing: Conduct thorough testing using the actual hardware to verify all functionalities. Documentation: Provide comprehensive documentation, including well-commented code, a technical manual, and a user guide. Requirements: Technical Expertise: Proficiency in Arduino programming and the Arduino IDE. Experience with microcontroller platforms, specifically Arduino boards (e.g., Uno, Mega, Nano). Familiarity with motor control systems, sensors, relays, and hardware interfacing. Knowledge of electrical and mechanical safety standards. Soft Skills: Strong problem-solving abilities. Attention to detail. Good communication skills for regular updates and collaboration. Deliverables: Fully functional and tested At...

I'm seeking a seasoned professional with expertise in digital electronics, particularly in circuit design and microcontroller programming, to help me implement an industrial automation system using a Raspberry Pi. Key Responsibilities: - Design and implement digital circuits suitable for industrial automation - Program the Raspberry Pi for controlling various industrial processes - Ensure the system is reliable and efficient Ideal Skills and Experience: - Extensive knowledge and experience in digital electronics - Proven expertise in Raspberry Pi programming - Prior experience in designing circuits for industrial automation - Strong problem-solving skills and attention to detail

I'm developing a control system using LabVIEW and need an experienced LabVIEW developer. Key Responsibilities: - Develop a control system using LabVIEW - Acquire voltage data through National Instruments hardware Ideal Skills and Experience: - Proficiency in LabVIEW - Experience with National Instruments hardware - Knowledge of control systems and voltage data acquisition

I'm in need of a firmware specialist who is proficient in Python/MicroPython. The firmware will primarily support an Integrated Circuit (IC) Driver. Key Responsibilities: - Develop and implement firmware for a microcontroller Ideal Skills: - Expertise in firmware development for microcontrollers - Proficiency in Python and MicroPython - Previous experience with IC Driver firmware - Electronic engineering Please only apply if you have significant experience in these areas.

I'm looking for a skilled Photoshop expert to help me create a group photo from four individual pictures. The main photo to be used is Pic 1. - Task: Add people from the other three pictures into the main photo to create a cohesive group shot. - Objective: The final product should look like a natural group photo, with all individuals seamlessly integrated into the picture. Ideal candidates for this project should have: - Extensive experience with Photoshop - A keen eye for detail and color matching - Ability to create a convincing final image

I'm seeking a microwave engineer with programming expertise to assist in building automated performance tests on microwave test equipment. Key Responsibilities: - Design and implement a variety of performance tests - Assessin...of us undergo Quality Assurance testing from time to time and this will be expected of you as well. Additionally, we build and test out drivers for new lab standards and you will likewise be expected to do the same within the templates we have created. Understanding how to program in GPIB, USB, LAN is essential as these are the primary programming languages we work in. Coders familiar with LabView, Python, C++ etc. should find the programming easier to master with our company. I am including some example spreadsheets to show you what we typically ...