Esp32 i2sJobb

I want to create a remote start system for my BMW E60. The system will use an esp32 c3 to communicate with my phone, and a arduino mega to handle the sensors,and everything else ( esp is only for comunication ). Once close, it should start the car. As a backup, it will use an R503 fingerprint sensor for authentication. The app is already made by me in thunkable Key components of the project: - mcp2515 to detect engine RPM and door status via bmw K-kan bus. - Arduino to check shifter position using a Hall sensor, engine RPM and handbrake signal to permit remote start. Communication: - The primary communication method will be Bluetooth Low Energy (BLE) to interact with my phone. I need someone who is: - Very active on freelancer or platforms like WhatsApp, Facebook, etc. - Willing...

My PCB for industrial machinery has been failing and I need a professional to review my schematic and board layout files. The board is controlled by an ESP32 and displays via a Nextion on UART. Issues to Address: - Interference between components - Unexpected resets or failures - Communication errors with peripherals Measures Taken: - Shielding - Filtering - Grounding techniques - Decoupling - Suggestions for field wiring to board -component values -adding any protection components or change values I look forward to your expertise in identifying any potential issues that could cause my board to fail in this industrial setting.

...project involves programming an ESP32 to work with a GPS correction system using NTRIP and communicating with the ZED-F9P module via I2C. Code is ready but we are having some issues, and they must be fixed. - we have the project hardware done, just need to get the code fixed, we can test locally after changes. Project Overview: The system receives GPS correction data via NTRIP using an internet connection through either Wi-Fi or mobile data. These corrections are then transmitted to the ZED-F9P module to enhance GPS accuracy. Currently, the code has issues specifically with mobile data connectivity and the NTRIP connection. Required Skills: ● Advanced experience in C++ programming ● Proficiency with the Arduino IDE and related libraries ● Expertise with ESP32, specific...

...dual GC9A01 displays for an advanced animated eyes project using the ESP32-S3 microcontroller. The project involves creating smooth and seamless frame-by-frame animations for a pair of 240x240 pixel displays. The animations will be based on high-quality JPG frames, leveraging libraries such as LVGL, CircuitPython, and TJpg_Decoder. The key objectives include: Synchronization: Both displays need to be perfectly synced for consistent animations across the eyes. Web-based Control: Develop a WiFi-enabled control panel that allows users to connect via a hotspot and select animation modes through a web interface. Animation Modes: Support multiple animation modes, including static and dynamic frames, while optimizing for the ESP32-S3’s storage and performance capabilities...

Hi, I’m looking for a freelancer to help me design two PCB variants for a stair-lighting controller using a 38-pin ESP32 Dev Module (USB-C). This system will power and control WS2812 LED strips and incorporate multiple sensors for an intelligent lighting setup. Below is an overview of what I need, followed by detailed requirements. At the end, I’ve included links and attachments referencing a similar board and my own sketches. >>> Overview of the Project 1. Goal: Create two PCB variants (Version A and Version B) of a stair-lighting controller for WS2812 LEDs: - Variant A: 2 LED outputs, - Variant B: 16 LED outputs. 2. Board: Uses an ESP32 Dev Module (38-pin, USB-C) mounted on female headers (no extra programming buttons needed). 3. Sensors: 2&tim...

I'm looking for an experienced programmer well-versed in Python and GPIO interfacing with ESP32. I need a script that will help automate device scheduling based on a daily timetable. Key Requirements: - The project involves 4 GPIOs, all of which should function independently. - Each of the four outputs should have different, selectable schedules. - The device should be able to turn on and off according to this daily timetable. Ideal Skills: - Proficiency in Python programming. - Extensive experience working with ESP32 and GPIOs. - Previous experience in automating device scheduling. Developer is developing the front end for the aap and firmware patch for this schedule. I look forward to your proposals.

I'm in need of a seasoned expert to assist with the hardware design of an ESP32-S3 project, specifically focusing on component selection. The primary area of concern is the selection of appropriate communication modules. Ideal Skills and Experience: - Extensive knowledge and experience with ESP32-S3 hardware and component selection - Proficiency in identifying suitable communication modules for various applications - Previous experience with PCB design and hardware troubleshooting - Strong understanding of power management and relevant components.

I'm looking for an experienced developer to write software for an ESP32 module. The primary function of the ESP32 will be to collect sensor data. The ESP32 will need to communicate this data using both WiFi and Bluetooth, with a specific focus on implementing Bluetooth Low Energy (BLE). Ideal skills and experience for the job: - Proficient in programming ESP32 modules - Experience with sensor data collection - Strong understanding of WiFi and Bluetooth communication protocols - Specific experience with Bluetooth Low Energy (BLE) - Ability to write efficient, reliable software for real-time data collection and transmission.

...or 3" BI-LED Projector, a lot of options/pictures will show up for reference. 1-The First STL File: THE SAME EXACT Lens Locking Bracket. (in the attached pictures) 2-The Second STL File: The same file you created, 1 minor modification, the bracket has 1 big gap in the bottom. i need to make one matching gap on the opposite side. The Goal here. i Invented a Servo Mechanism controlled by a mini esp32 c3, the Servo arm is connected to a round GC9A01 Display controlled by a switch. when switch is turn on, the servo arm goes down 90 degrees to line up the display in the center of the lens. when switch is turned off, the servo arm goes back to its original location. For Testing Purposes, i have 1 BI-LED. i cut 1 arm (top left) and carved a small portion of the black mounting le...

...a compact, double-layer PCB designed for a digital circuit. The project involves creating a Gerber file that is ready for printing, accommodating the given circuit diagram. The PCB should be small and compact, suitable for accommodating a digital circuit. The 2 ESP32, SIM800L, MAX 485 and ADS1115 will be mounted on a 2.54 mm pin female single-row header strip. All connectors will use 5 mm PCB terminals with standard 0.1” (2.54 mm) spacing through holes. Components Ref: ESP32 38Pin Development Board: Hi Link HLK-PM01 5V/10W: 2.54mm Pin Female Single Row Header Strip:

...me with a high-accuracy speech recognition project using the ESP32-S3 board. Key Responsibilities: - Design and implement an embedded system with the ESP32-S3 board. - Optimize and integrate the ESP-Skainet speech recognition library for our needs. - Ensure the system achieves high levels of speech recognition accuracy. Ideal Skills and Experience: - Proficient with the ESP32-S3 board. - Extensive experience in embedded systems design. - Strong skills in working with the ESP-Skainet speech recognition library. The objective of the project is to create a system where a phone connects to an ESP32-S3 board via Bluetooth. The phone will send a user-defined keyword to the ESP32-S3, which will then be set for recognition. The ESP32-S3 board will us...

I need a circuit board designed and built that uses an ESP32 to drive a large number of LEDs (SMD, 300-500). The LEDs should be arranged to represent a detailed map that will be provided. Key Requirements: - Design and construct a visually appealing circuit board (as it may be directly exposed to end user) - Use an ESP32 to control a large number of LEDs (you will have to explain how you plan on doing this) - Arrange the LEDs according to a detailed city map which I will provide on the circuit board. Ideal Skills and Experience: - Electronics and circuit board design - Proficiency with ESP32 - Experience with LED projects - Design skills for creating an aesthetically pleasing product

I'm working on a unique project - animating car headlights to resemble eyes, like the devil demon eyes, using an ESP32. I have already written 75% of the code and set up two TFT displays (GC9A01) to serve as the 'eyes', but I need assistance with the following: - Library Integration: I need help finding the right libraries to complete my project. - Display Synchronization: The two screens need to be perfectly synced, and I could use some guidance on how to achieve this. i invented a servo with a code to turn the eye inside the headlight on and off, thats done and ready. - Animation Rendering: So far, I've only been able to implement basic animations like blinking and rolling. I would like advice on how to create more complex sequences. In addition, I need an ST...

...animations like blinking, rolling, and complex eye-like movements. This project will use an ESP32 microcontroller and two GC9A01 TFT displays. Key requirements include: - Using frame-by-frame animation techniques with libraries such as LVGL, TFT_eSPI, TJpg_Decoder, and SPIFFS or LittleFS for storage. - Smooth rendering and advanced functionality. - Implementing a servo motor mechanism for controlling the 'eye' turning feature inside the headlight. - Creating a web-based control panel integrated via a WiFi hotspot for dynamic user interaction. - Designing a 3D-printed bracket housing to securely hold a 77 mm lens on a bi-LED projector. Ideal skills and experience for this job: - Proficiency in using ESP32 microcontroller and GC9A01 TFT displays. - Strong backgr...

I am looking for a professional to help create unique, animated car headlights for my vehicle. The headlights should resemble expressive eyes and be able to perform various synchronized animations such as blinking, rolling, and complex eye-like movements. Key project requirements include: - Utilizing an ESP32 microcontroller and two GC9A01 TFT displays - Implementing a servo motor mechanism to control the 'eye' turning feature - Achieving seamless display synchronization - Advanced animation rendering - Designing a 3D-printed bracket housing to securely hold a 77 mm lens on the bi-LED projector In addition to technical precision, creative design is key to this project. Ideal skills and experience for this job include: - Proficiency in microcontroller programming - Expe...

I'm working on a unique project - animating car headlights to resemble eyes, like the devil demon eyes, using an ESP32. I have already written 75% of the code and set up two TFT displays (GC9A01) to serve as the 'eyes', but I need assistance with the following: - Library Integration: I need help finding the right libraries to complete my project. - Display Synchronization: The two screens need to be perfectly synced, and I could use some guidance on how to achieve this. i invented a servo with a code to turn the eye inside the headlight on and off, thats done and ready. - Animation Rendering: So far, I've only been able to implement basic animations like blinking and rolling. I would like advice on how to create more complex sequences. In addition, I need an S...

I'm seeking a professional consultation on the ESP32-S3 SIM7670G 4G Development Board. The primary application for this project is remote monitoring of security and surveillance data via analog cameras. Key Responsibilities: - Provide expert guidance on the optimal use of the ESP32-S3 SIM7670G 4G Development Board for remote security monitoring. - Assist in the integration of analog cameras with the board for effective surveillance. - Recommend best practices for data collection and transmission. Ideal Skills: - Extensive experience with the ESP32-S3 SIM7670G 4G Development Board. - Proficiency in IoT and remote monitoring systems. - Strong understanding of security and surveillance systems, particularly with analog cameras. - Excellent communication skills for...

I want to create a remote start system for my BMW E60. The system will use an esp32 c3 to communicate with my phone, searching for a BLE beacon and a arduino mega to handle the sensors,and everything else ( esp is only for comunication ). Once close, it should start the car. As a backup, it will use an R503 fingerprint sensor for authentication. Key components of the project: - mcp2515 to detect engine RPM and door status via bmw K-kan bus. - Arduino to check shifter position using a Hall sensor, engine RPM and handbrake signal to permit remote start. Communication: - The primary communication method will be Bluetooth Low Energy (BLE) to interact with my phone. I need someone who is: - Very active on freelancer or platforms like WhatsApp, Facebook, etc. - Willing to communicate v...

...double-layer PCB designed for a digital circuit. The project involves creating a Gerber file that is ready for printing, accommodating the given circuit diagram. The PCB should be small and compact, suitable for accommodating a digital circuit. The ESP32, SIM800L, and ADS1115 will be mounted on a 2.54 mm pin female single-row header strip. All connectors will use 5 mm PCB terminals with standard 0.1″ (2.54 mm) spacing through holes. 6 X 14 CM PCB Board - Power PCB 14 x 14 CM PCB Board ESP32 38Pin Development Board --> Hi Link HLK-PM01 5V/10W --> 2.54mm Pin Female Single Row Header Strip -->

I'm looking for a skilled developer to create a straightforward VST utility plugin. The primary function of this plugin is to output audio from a mixer track over USB to an ESP32. Key Requirements: - The VST utility tool needs to be compatible with both Windows and macOS platforms. - Understanding and experience with ESP32 integration will be a significant advantage. - Knowledge in developing VST plugins and audio processing will be highly beneficial. Please ensure to include examples of your previous work with VST plugins in your proposal.

I need an expert in data security, privacy, and blockchain to work on a project involving secure proximity activations using smart devices. Overview: - The system should be activated by a SmartPhone entering a location. - The system should open gates, turn on lig...(BLE) Secure Connection for security. Skills and Experience Required: - Extensive knowledge in data security and privacy. - Proficient in integrating with smart devices. - Experience working with Bluetooth Low Energy (BLE) Secure Connection. - Familiarity with using MPU (Raspberry) devices and Docker Container-based System. - A new advertisement system should be adopted. (Or alternatively - MCU (ESP32) devices are considered leveraging Jaguar Container-based Systems - Secure Proximity Activations MCU-based in TOIT langu...

I need a skilled developer to enhance my React Native ESP32 IoT app with several important additions and improvements. Key Requirements: 1. Add a widget to the app that displays the next prayer time. 2. Enhance the overall performance of the app. 3. Fix minor bugs, particularly with audio playback and the countdown timer. 4. Implement BLE - esp-idf-provisioning for connecting the app with the device to play audio at scheduled times. 5. Prepare the code for a successful launch on Android and iOS app stores. The highest priority for this project is the BLE - esp-idf-provisioning implementation. Experience with React Native, IoT applications, and BLE connectivity is crucial. A strong understanding of performance enhancement techniques in mobile applications will also be beneficial. ...

I'm seeking an expert in ESP32 microcontroller and MQTT Mosquitto Broker who can help me with a project aimed at remotely controlling appliances over Wi-Fi. Key Requirements: - Design and implement an ESP32 based system for remote control of appliances. - Integrate MQTT Mosquitto Broker for communication management. - Ensure Wi-Fi is utilized as the main communication method. Ideal Skills and Experience: - Proficient in programming and working with ESP32. - Strong understanding and experience with MQTT Mosquitto Broker. - Prior experience with home automation projects would be a plus.

I need to create a library that allows the ESP32-S3 to connect to a computer as an MSC device to access the FAT partition. I found an interesting example on GitHub () that is close to what I need, but the library has some issues: it often fails to mount correctly. I am looking for someone who can fix the problem or create a new library that works as expected.

I'm working on a robotics project and need assistance with programming an ESP32 to control stepper and servo motors for robot arms. Key Requirements: - Extensive experience with ESP32 programming - Proficient in controlling stepper motors and servo motors - Understanding of robotics and robot arm mechanics - Ability to write efficient and effective control code The goal is to have a seamless control system for the robot arms using the ESP32. Your previous experience in similar projects will be a significant advantage.

The pcb will be done using easy eda.. Garber, BOM and CPL needed to be deliver

I have an ESP32-CAM project that needs to recognize a few custom objects and execute a pre-written Arduino program based on the recognition. The program is already ready, and I simply need the ESP32-CAM to identify the objects and trigger the next action. The specifics of the project include: - Recognizing 1-5 custom objects with the ESP32-CAM - Using a manually collected image dataset to train the recognition system Ideal candidates for this project should have: - Experience with ESP32-CAM and Arduino - Skills in object recognition and machine learning - Ability to work with custom datasets - Proficiency in programming and hardware interfacing

...experienced hardware and firmware developer to create a WiFi-enabled pen drive using an ESP32 module and an SD card module. This device should function as a traditional USB pen drive while also enabling wireless data transfer and management. Key Requirements: - The primary use case for this device is business file sharing. This means it should be able to handle large files, work reliably, and be user-friendly. - For the wireless management and data transfer, I'm specifically interested in the FTP protocol. - In terms of security, the device should include password protection to ensure secure file sharing. Ideal Skills and Experience: - Extensive experience in hardware and firmware development. - Prior work with ESP32 modules and SD card modules. - Familiarity with c...

I'm seeking a seasoned hardware and firmware developer to engineer an offline, WiFi-compatible USB pen drive via an ESP32 module paired with an SD card module. This device should operate as a conventional USB pen drive, whilst also facilitating wireless data transfer and management. Key Requirements: - The primary function of this device is to support wireless data transfer, specifically enabling file sharing between multiple devices. - Compatibility is crucial. The pen drive must support seamless wireless file sharing across Windows, macOS, and Linux operating systems. Ideal Skills: - Extensive experience in hardware and firmware development. - Proficiency with ESP32 and SD card modules. - Strong understanding of USB drive functionality and wireless data transfer mech...

I'm looking for a simple program that enables a sender to dispatch co...radio links. The sender will be an ESP32S3 equipped with a 7" LVGL display, while the receivers will be standard ESP32s. Key Features: - The sender should be able to send control commands. - The receivers should report their operational status back to the sender. - Communication between the display and the ESP32S3 should be via UART. Ideal Skills: - Proficiency in programming with ESP32S3 and ESP32. - Experience with RS485 and XBee radio links. - Knowledge of UART communication protocol. - Familiarity with LVGL display programming. Samples codes from github : As modbusRTU variant :

I'm seeking a seasoned PCB designer to assist in creating a custom, compact PCB for an IoT project focused on sensor integration. The PCB will need to accommodate several components, including an ESP32-WROOM-32 microcontroller, SIM card module, SD card module, and RS485 transceiver. Key Requirements: - Expertise in PCB design, specifically for IoT applications. - Experience integrating multiple components onto a single PCB. - Ability to design a compact-sized PCB without compromising functionality. - Familiarity with the ESP32-WROOM-32 microcontroller and other specified modules. Ideal Skills: - Proficiency in PCB design software. - Strong understanding of sensor integration and IoT systems. - Excellent problem-solving skills to overcome design challenges. - Attention ...

...PS4-VOC-10-MOD) and employ an ESP32 or a similar microcontroller for wireless communication, as well as executing on-device AI models. Key Requirements: - The design needs to prioritize low power consumption, making it suitable for wearable or portable use. - A primary focus of this device will be monitoring human breath, so expertise in integrating and utilizing VOC sensors is crucial. - Long battery life is of utmost importance, far more than a rechargeable battery or energy harvesting capabilities. Ideal Skills: - Extensive experience in PCB design, particularly using KiCad. - Proven track record in designing compact, low-power IoT devices. - Familiarity with health monitoring devices and their design requirements. - Proficiency in interfacing with ESP32 or similar mi...

I'm seeking a developer to create a comprehensive LED light control application for Espressif ESP32. This app should cater to home automation, allowing users to manage their LED lights conveniently. Key Features: - Control: Users should be able to turn the lights on/off. - Scheduling: Integrate a timer feature and a calendar for scheduling purposes. - Presets: The app should come with preloaded lighting presets. - Interface: The app should be available as both a Mobile and a Web app. Ideal Skills: - Proficiency in developing for Espressif ESP32 - Experience with mobile and web app development - Knowledge of home automation systems - Ability to create user-friendly interfaces Please submit your bid only if you have the necessary skills and experience. I look forward to...

I'm seeking a professional with expertise in ESP32 and Mosquitto Broker for industrial control, specifically in process automation. It is necessary to write code according to the PCB scheme and topics for MQtt management. esp32 via mosqutto broker. Mandatory use of TLS certificates Key Responsibilities: - Design and implement an ESP32 and Mosquitto Broker setup tailored for industrial process automation. - Integrate MQTT communication protocol into the setup for seamless connectivity and control. Ideal Skills: - Extensive experience with ESP32 and Mosquitto Broker. - Proven track record in industrial process automation. - Proficiency in MQTT, with previous integration examples. Please provide examples of similar projects you have completed in your ap...

...the last tuple, it should loop back to the first. Connectivity: Bluetooth connectivity for receiving messages from an external ESP32 module. Button Functionality: A physical button will be used to cycle through the stored messages. Power Source: The watch should be powered by a rechargeable lithium-ion battery. Components: OLED display for showing messages. Button for navigation. Bluetooth communication. Deliverables: Fully functional watch prototype. Source code for both the watch and the external ESP32 module. Circuit diagrams and assembly instructions. Freelancer Skills Required: Embedded systems development. Experience with microcontrollers (ATtiny85, ESP32, etc.). Knowledge of Bluetooth communication. Proficiency in C++/Arduino programming. Hardware protot...

...interface with an ESP32. The circuit should be capable of transmitting and receiving logic 1 and logic 0 commands via a two-wire current loop interface. It must support full-duplex communication, meaning it should also be able to receive responses. Logic Explanation: Based on the attached specifications: 1. Logic 0 ("Space"): Current: Between 0 mA (Minimum) and 2 mA (Maximum). 2. Logic 1 ("Mark"): Current: Between 42.75 mA (Minimum) and 47.25 mA (Maximum). The current loop operates at a nominal 45 mA ±5%. The voltage for the open-loop supply must be between 12V DC (Minimum) and 42V DC (Maximum). Requirements: The designed circuit must handle current regulation for transmitting the appropriate logic levels (0 and 1). It should interface se...

I'm in need of an experienced professional who can help me with connecting an EC100-N-421-A01 (stretch sensor) to an ESP32 module. The collected data should then be transmitted via Bluetooth to both Apple and Android devices. Key Requirements: - Connect the stretch sensor to the ESP32 module - Transmit processed sensor data via Bluetooth - Ensure the data is displayed on mobile devices through graphical visualization Ideal Skills: - Proficiency in working with ESP32 modules and stretch sensors - Extensive experience in Bluetooth data transmission - Ability to develop mobile-friendly graphical visualizations I only need processed data from the stretch sensor. Please, bid if you are skilled in the aforementioned areas.

...solution for ESP8266 and ESP32 devices, utilizing GSM modules like SIM800L and A7672S 4G modules. Key Responsibilities: - Firmware Development: You will be responsible for developing the necessary firmware for the OTA updates. - Server-side Setup: Setting up the server-side infrastructure required for delivering the updates. - GSM Module Integration: Seamlessly integrating the GSM modules for update delivery. Project Priorities: - User-Friendly: The OTA update solution should prioritize ease of use for the end-user, making the process as simple and straightforward as possible. Operating Environment: - The primary environment for these devices will be agricultural settings. Ideal Skills and Experience: - Proven experience in IoT development, particularly with ESP8266 and ES...

Need to implement 4 motorized faders using Atmega 328P to existing esp32 project. I'm looking for a professional skilled in embedded systems and motor controls. The task is to implement 4 motorized faders in an existing ESP32 project, using an Atmega 328P microcontroller. Key Requirements: - The motorized faders will primarily be used for audio mixing, so previous experience with audio-related projects could be beneficial. - The faders need to be synchronized with software, so proficiency in software integration is necessary. Ideal Skills: - Extensive knowledge of Atmega 328P and ESP32 - Experience with motorized faders - Proficiency in software integration - Background in audio mixing hardware would be a plus.

I'm looking for an expert in IoT and app development to design an LED light control system using an ESP32 chip. The lights should be controllable via a dedicated app on a smartphone, with features for color changing, brightness control, and timer settings. The system should also be integrated with Amazon Alexa for voice control. Key requirements: - Experience with ESP32 chip and related hardware - Proficient in app development for both iOS and Android - Knowledgeable in IoT and home automation systems - Experience with integrating systems with Amazon Alexa - Able to design user-friendly interfaces and intuitive controls

I'm looking for an experienced programmer to modify an ESP32 voice assistant project. Currently, the system retrieves responses from the Gemini API. I need it to pull data from a specific JSON file located on an SD card module instead. Key Changes Needed: - Adjust the data retrieval method to source from a JSON file in an SD card module. Requirements: - Proficiency in programming ESP32 and working with voice assistant projects. - Extensive experience in handling JSON files. - Familiarity with SD card modules in ESP32 projects. The task involves working with just one JSON file and does not require the system to access multiple files. Please bid if you can deliver this project promptly.

...updating my KiCAD PCB design for an ESP32 shield. The project involves: - Improving the routing and trace layout to ensure all connections are finished according to requirements - Preparing a BOM file with all components ready for upload to PCBWay I have detailed connection requirements, so you won't need to help with defining them. However, your expertise in optimizing the routing and traces is critical for this project. Please read the requirements file for details. Don't hesitate to ask any questions. Ideal skills and experience for the job include: - Professional english level desirable. - Ability to think critically and identify potential issues / flaws in design. - Proficient in KiCAD with a strong portfolio of PCB designs - Experience in designing for ESP...

...Description: We are developing an AI-powered wearable medical alert system focused on health monitoring, early anomaly detection, and real-time data transmission. Our prototype integrates advanced sensors and hardware for accurate health insights and seamless performance. Key Components in Use: Sensors: MAX86174A (heart rate, SpO₂), LSM6DSLTR (6-axis accelerometer and gyroscope) Controller: ESP32-S3, MAX32664 We are looking for an experienced wearable tech consultant who can: Provide strategic guidance on transitioning from prototype to production. Optimize hardware-software integration for reliable and accurate data output. Ensure sensor calibration for accuracy and power efficiency. Offer insights into durability factors like waterproofing, impact resistance, and long-term ...

I will get the hardware for the project using this amount

Job Request: BLE Mesh System with ESP32-C3 and SIM7080 Integration Hello I am looking for a developer to create a complete firmware solution based on the following hardware and requirements: Hardware: • ESP32-C3 • SIM7080 Module • Motor Controller • Two Limit Switches System Requirements: 1. BLE Mesh Implementation: • Develop a BLE Mesh system with client-server architecture. • Each server node must function as a relay. 2. Command Flow: • I want to send a command to the client node via the SIM7080 module. • The client should broadcast the command to all server nodes. • Each server will relay the command further until the entire mesh network has received it. • Once all servers confirm receipt of the command, I s...

Schematic and Pcb design of a small board

I am looking for an experienced developer to create a two-wheeled mobile robot using an ESP32 with fuzzy control for navigation in a dynamically changing and unknown environment. Below are the key requirements for the project: 1. Code Development: - The robot's control should be based on the NodeMCU platform using ESP32 hardware. - The code should be readable and easily modifiable, not a hardcoded solution. - Fuzzy control should be implemented for stabilizing and navigating the robot. 2. Robot Frame Design: - A 3D printable frame should be designed to house all the robot’s mechanical components. - The frame must allow the robot to balance on two wheels. 3. API and Mobile App Integration: - The mobile app must be implemented using Angular and Ionic. - Develop...

...source code is already in a „Rpi-portable” version, i.e. stripped of Sharc peripherals-specific code Hardware concept: • Use of two USB to I2S/SPDIF UAC2 converters like this: ((as input Converter1 and output Converter2) or (as output Converter2) • I2S pins of Converter 1 will be connected to RPi GPIO header and feed input audio signal via the standard RPi I2S port • Converter 2 will be connected to a Rpi USB port and will output audio signal via ALSA USB audio device Scope of work - 3 main tasks:

I need a PCB designed and laid out for a medium-sized consumer electronics product. The PCB should be as small as possible - ideally ~50mm x 50mm. Key Requirements: - Design a PCB suitable for consumer electronics - Layout the...Gerber files I have prototyped with a breadboard and am now doing the same with a prototype PCB but want to get a proper PCB layout sorted with a gerber so I can get a professionally made up PCB for testing. I have a drawing of all the components and connections (see attached) but no experience of laying out a board. Not entirely sure how many layers I need/etc. Board includes: 1x Arduino Nano ESP32 1x MCP6002 2x 5V switched relays (currently using a pre-made board for this which has some other minor components) 16x resistors 4x capacitors 12x screw wire ...

I'm seeking a programmer to finalize the coding for my two-wheel line follower module, which utilizes an ESP32 S3. This project involves making the module controllable via a mobile app, specifically Dabble or MIT App Inventor. Key requirements: - Completion of the provided code to ensure compatibility with a Bluetooth-based app. - Implementation of the line-following functionality. - Use of Infrared (IR) sensor for navigation. The project will involve working from a shared schematic and partially completed code. The ideal freelancer will have: - Extensive experience with ESP32 S3 programming. - Proficient in PlatformIO or C++ - Strong coding skills to complete the project efficiently. Note: Arduino ide may not be sufficient for this task therefore esp idf or platfor...