Microcontrolador Jobs

I'm seeking an experienced developer to send me Berry Code to Read an PN532 Reader, to access an authenticated RFID Card. I am unsure if this is possible through , or if the Driver PN532 has to be created for Berry. The PN532 is connected through UART, but I2C would be possible as well. SPI isn't possible, as the Hardware only has 2 GPIO's left (21&22 on ESP-Wroom-32) Key Requirements: - Control & Interaction: The primary function of the driver is to facilitate reading RFID cards through the Berry device. - Authentication: The driver must have the capability to authenticate and access secure data stored on the Mifare Classic cards. - Experience: Prior experience with Tasmota, Berry, and PN532 is crucial. - Skills: Proficiency in coding, problem-solving, and unde...

I need someone to spec out a Local area network for me. I want it spec'd out with high quality equipment available either from Australian retailers or will shipping available to Australia. You will have to provide part lists etc It will need to minimise latency and maintain atleast 1gbps It consists of 3 main locations. --- A. Starlink High Performance Dish Point A is around 300m from point B and will have a 240v power supply run to it and and fiber cable run back to point B. The output from the Starlink dish is a standard Ethernet cable from this injector. Everything will be contained in an electrical cabinet. It will need a small POE capable switch to allow some cameras, Starlink dish and additional devices, say 5-10 port. Something to convert Ethernet from switc...

My OnePlus smartphone is malfunctioning and I am unable to access fastboot mode. I hear the connecting sound and see the USB drivers in device manager for only a couple of seconds before it disconnects and reboots into the system. - The device is a OnePlus smartphone. - The bootloader has been previously unlocked. - I need assistance to flash the stock ROM. The ideal freelancer for this project should have experience with OnePlus devices, stock ROM flashing, and bootloader issues.

I'm working on a robotics project and need assistance with programming an ESP32 to control stepper and servo motors for robot arms. Key Requirements: - Extensive experience with ESP32 programming - Proficient in controlling stepper motors and servo motors - Understanding of robotics and robot arm mechanics - Ability to write efficient and effective control code The goal is to have a seamless control system for the robot arms using the ESP32. Your previous experience in similar projects will be a significant advantage.

I am currently engaged in a research and development-focused robotics project and require expert assistance with integrating both Raspberry Pi and Modbus with a Panasonic servo. The primary component of this project revolves around programming with Python. Ideal candidates for this project should possess: - Extensive experience in robotics and R&D - Proficiency in integrating Raspberry Pi and Modbus with Panasonic servos - Advanced skills in software development - Ability to troubleshoot if necessary

Freelance Project Brief: Driver Development for MX-B10HR50-IS23 LCD Project Overview: We are seeking an experienced freelancer to develop a driver for the MX-B10HR50-IS23 LCD. The driver will manage the LCD's power supply, receive information via Bluetooth, process the input, and transmit data to the LCD. The primary function of the project is to display single colors on the LCD, not images. Key Project Details: Functionality: The driver will control the LCD to display a single color at a time, based on Bluetooth commands. Pixel synchronization is not required. Once a color is generated, the pixels will remain active until a new color command is received via Bluetooth. Upon a color change, pixels will turn off, receive the new color data, and light up again with the updated color. ...

We are seeking an experienced Debian/Linux software developer to package a collection of CGI programs for Debian distribution. Project Overview: - Patented software that convert IMAP email repositories into indexed webpages (blog/wiki) Key Requirements: - Expertise in Debian packaging practices and policies - Ability to ensure compliance with Debian licensing requirements - Strong C++ skills, including STL and template programming - Gives accurate estimates for milestones - Experience with IMAP clients/servers and HTML, helpful Technical Details: - Proprietary GNU Make setup (no debconf/automake) - Currently works with Thunderbird emails on Dovecot backend - Build dependency: boost_program_options - ~200K C++ source code with STL and custom templates - Single space indentation, limited ...

I'm looking for someone to program a USB-powered LED strip controller that can be controlled with a simple button-based physical remote. The remote should allow for 12 simple, single colour patterns - some LEDs on, others off. Ideal skills for this project include: - Embedded systems programming - Remote control configuration - LED programming - USB power integration - Understanding of simple colour patterns

I'm seeking an expert ARM programmer to code an IC for a remote device with 4 relays. Key Aspects of the Project: - The remote device needs to have basic on/off control and timed control capabilities. - Control of the device should be via physical buttons. - The device needs to support multiple users. Ideal Skills: - Proficient in ARM programming. - Prior experience with programming for relay-based remote devices. - Ability to design user-friendly, multi-user compatible interfaces.

I'm experiencing background noise from my PDM microphone, which is connected to a codec ADC6140 during recording. I've already attempted to troubleshoot the issue by adjusting the microphone settings, but the problem persists. I need review of the PCB layout to identify the problem Key requirements: - Proficient in audio electronics troubleshooting - Experience with PDM microphones and codecs - Able to diagnose and resolve analog circuit design Please provide your approach to diagnosing and fixing this issue in your bid.

I'm in need of a skilled PCB designer to assist with a project-specific PCB design. The PCB is intended for a consumer electronics application, and it will be a double-layer layout. Key components to be included on the PCB: - Microcontrollers - Power regulators - LoRa - RTC - UART - Discrete components Ideal candidates will have a robust understanding of PCB design for consumer electronic products, proficient in double-layer PCB layouts. Experience with placing and integrating microcontrollers, power regulators, and other specified components is vital. Please also demonstrate your knowledge of working with LoRa, RTC, and UART in your proposal.

I'm seeking an expert in circuit design, PCB creation, and programming for an NXP Battery Sensor tailored for an automotive application. Key Requirements: - Full design and programming of the NXP Battery Sensor with CAN and LIN MM9Z1_638. - Implementation of only the LIN (Local Interconnect Network) interface. - Support for specific functionalities: Voltage monitoring, Temperature sensing, and Current measurement. Ideal Skills and Experience: - Extensive knowledge in automotive sensor design. - Proficient in designing circuits and PCBs. - Experienced in programming for NXP components. - Familiar with LIN interface implementation.

I'm seeking an experienced hardware and firmware developer to create a WiFi-enabled pen drive using an ESP32 module and an SD card module. This device should function as a traditional USB pen drive while also enabling wireless data transfer and management. Key Requirements: - The primary use case for this device is business file sharing. This means it should be able to handle large files, work reliably, and be user-friendly. - For the wireless management and data transfer, I'm specifically interested in the FTP protocol. - In terms of security, the device should include password protection to ensure secure file sharing. Ideal Skills and Experience: - Extensive experience in hardware and firmware development. - Prior work with ESP32 modules and SD card modules. - Familiarity wit...

I'm seeking a seasoned hardware and firmware developer to engineer an offline, WiFi-compatible USB pen drive via an ESP32 module paired with an SD card module. This device should operate as a conventional USB pen drive, whilst also facilitating wireless data transfer and management. Key Requirements: - The primary function of this device is to support wireless data transfer, specifically enabling file sharing between multiple devices. - Compatibility is crucial. The pen drive must support seamless wireless file sharing across Windows, macOS, and Linux operating systems. Ideal Skills: - Extensive experience in hardware and firmware development. - Proficiency with ESP32 and SD card modules. - Strong understanding of USB drive functionality and wireless data transfer mechanisms. - Expe...

I'm looking for a simple program that enables a sender to dispatch control commands over RS485 to receivers via XBee radio links. The sender will be an ESP32S3 equipped with a 7" LVGL display, while the receivers will be standard ESP32s. Key Features: - The sender should be able to send control commands. - The receivers should report their operational status back to the sender. - Communication between the display and the ESP32S3 should be via UART. Ideal Skills: - Proficiency in programming with ESP32S3 and ESP32. - Experience with RS485 and XBee radio links. - Knowledge of UART communication protocol. - Familiarity with LVGL display programming. Samples codes from github : As modbusRTU variant :

We are looking for an electronics circuit designer with expertise in audio recording and playback to design a circuit for a small device with the following specifications: Device Requirements: Recording and Playback Functions: The device should record audio when a button is pressed. The playback should be triggered by an interrupt (via I2C). Audio Quality: The audio resolution should be at least 16-bit for high-quality recording and playback. Audio Alerts: The device should emit audio alerts in the following scenarios: When recording starts. When recording ends. When the battery is low. Power Efficiency: The microcontroller must support sleep mode to save power. The device should operate on 3 AAA batteries, using low-cost and power-efficient components. Trigger by Event: The device should...

The BLE beacon Device is Controlling a Servo as actuator. Connection is done in parallel to tracker and /or Smartphone. Security Should be identical to existent LTE solution. Some Sensor Signals have to be transferred. System has to work with/without cloud Mobil connection. Only Cloud Registered devices are allowed to be connected. Chip is Nordic 5310 developing platform Nordic SDK. Hardware existing.

I'm working on a project for my BMW E60 and I need a professional with Arduino coding experience to help me with the programming. The project involves creating a remote start system that uses either the Nano 33BLE or an ESP with a CAN bus module. The system will also incorporate a fingerprint module and various other safety sensors. Key aspects of the project include: - All coding needs: This includes the coding for the remote start using the fingerprint module, the remote unlock functionality using BLE or standard Bluetooth, and the integration of the CAN bus and other safety sensors. - Focus on all elements: The coding assistance required will cover every aspect of the project, from the integration of the CAN bus module to the configuration of the BLE/standard Bluetooth for remote ...

I'm in need of an experienced embedded systems developer to help troubleshoot and debug some code running on a TI CC1352P micro-controller. The debugger will need to have a strong background in C/C++ and familiarity with TI Code Composer Studio. Given the complexity of the project, I'm looking for someone based in Ontario, Canada, who can potentially offer in-person assistance if necessary. Ideal Skills and Experience: - Proficient in C/C++ - Extensive experience with TI Code Composer Studio - Familiarity with TI CC1352P microcontroller - Embedded systems development background - knowledge of OpenThread Protocol - wireless thermostats (based on TI CC1352P micro-controller) creating Mesh Network (OpenThread Protocol) - Based in Ontario, Canada

I am looking for an experienced freelancer to develop custom firmware for a DMA card, best if it is on 75T or 35T. The firmware needs to be compatible with EAC, BE, Faceit, and Vanguard anti-cheats. (FACEIT most importantly) Requirements and Features: - I am open to suggestions for specific requirements and features for the firmware. - The firmware should be optimized for gaming purposes. Ideal Skills and Experience: - Strong knowledge and experience in developing custom firmware for DMA cards, and knowledge about games faceit and cs2). - Familiarity with EAC, BE, Faceit, and Vanguard anti-cheats. - Understanding of gaming requirements and optimizations for firmware development. If you have the skills and experience required for this project, please submit your proposal with releva...

I'm looking for a Raspberry Pi based Bluetooth cabinet door lock for my office. The primary purpose of this lock is to control access in a shared space. Ideal Skills: - Proficiency in Raspberry Pi programming - Experience in Bluetooth technology integration - Mobile app development skills Key Requirements: - The lock should be secure and reliable - It needs to be controlled via a mobile app - The project includes both software and hardware components. Please provide examples of previous similar projects you have completed.

Potrzebuję stworzyć projekt do Arduino Nano gdzie poprzez RS485 będę odbierał 2 wartości z zakresu 0-100 używając Modbus RTU w trybie Slave. Mam kupione wszystkie potrzebne część ale potrzebuję do tego programu.

tengo un arduino uno con shield W5100 y esta en ethernet con su código para mover el servomotor que tiene tengo que entrar pára controlarlo remotamente a una dirección Internet como http;// y deseo entrar por MIT APP INVENT de forma que por medio flechas para girar izquierda ,derecha remotamente el servomotor

I need a firmware expert with a strong electronics background to help make changes and improvements to our Texas Instrument MSP430G2302 microprocessor firmware. - We have documentation and a working program. - Need an expert to enhance our product. - Prior experience with TI programming is crucial.

I'm looking for an expert in PCB design to create a 50x50mm PCB board featuring a STM32H750, 16 bit RAM, and a 24 bit RGB TFT connector. This board will be used in an industrial control application, so its design needs to support real-time processing capabilities. Key aspects of the project: - Design a compact PCB within a 50x50mm area. - Integrate a STM32H750 microcontroller, 16 bit RAM and a 24 bit RGB TFT connector. - Ensure the PCB supports real-time processing. I will provide all the necessary specifications and details for the components. The ideal candidate for this project will have a strong background in PCB design for industrial applications and is adept at designing for real-time processing.

I'm looking for a professional to develop a remote cellular door unlocker controlled via a Web API. The system should have the following features: - Control: The Web API should allow for unlocking and locking the door remotely. - Security: I need a robust encryption mechanism to secure the control system. - GPS: Needs to have a GPS module that periodically updates via the web API over cellular Ideal candidates should have experience in developing secure Web APIs and understanding of remote control systems. Please provide examples of relevant past work. Needs to be modular and all parts able to be sourced from AliExpress.

I'm having trouble with my keyestudio DIY solar tracking electronic kit. I'm specifically facing an issue with the microcontroller, where I'm getting the error: "avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x67". I need an expert who can help me troubleshoot this issue. The ideal candidate should be experienced in dealing with similar kits and microcontroller issues, preferably with keyestudio products. I would appreciate a step-by-step interactive guide to understand the troubleshooting process. Skills required: - Electronics expertise - Experience with keyestudio kits - Microcontroller troubleshooting - Ability to create step-by-step interactive guides.

FPGA and Cryptography Expertise for Key Generation System Development Hi, I’m working on a project that involves cryptographic key generation, specifically leveraging ECC (Elliptic Curve Cryptography) for Bitcoin-related key generation. We are looking for a freelancer with FPGA expertise to assist in developing the hardware and logic for the ECC operations, with the end goal of integrating it into a larger system that offloads the computationally intensive parts of the process. Core Goals of the Project: Implement efficient ECC point multiplication (secp256k1) on FPGA hardware. Ensure high throughput for cryptographic operations (we are targeting 1B keys/sec performance). Offload ECC computation from the main processing units to Linux Server (with CUDA GPUs), using Ethernet com...

I'm seeking a professional with expertise in ESP32 and Mosquitto Broker for industrial control, specifically in process automation. It is necessary to write code according to the PCB scheme and topics for MQtt management. esp32 via mosqutto broker. Mandatory use of TLS certificates Key Responsibilities: - Design and implement an ESP32 and Mosquitto Broker setup tailored for industrial process automation. - Integrate MQTT communication protocol into the setup for seamless connectivity and control. Ideal Skills: - Extensive experience with ESP32 and Mosquitto Broker. - Proven track record in industrial process automation. - Proficiency in MQTT, with previous integration examples. Please provide examples of similar projects you have completed in your application.

I'm in need of a skilled professional to assist in controlling multiple I/O devices via the I2C interface in my PICO C project. The schematic capture has been completed, but might require some adjustments tied to project milestones. After this phase, I'll be handling the PCB layout and procuring the first test board. Key Responsibilities: - Adjust schematic capture as necessary - Write PICO C code for controlling sensors and actuators - Include RaspPi5 test code to verify I2C commands - Focus on critical functionalities such as control commands, error handling and I2C two-way communications Experience with I2C communication is essential, specifically with a single master and multiple slaves configuration. Proficiency in PCB design and familiarity with test procedures for I2C co...

I'm looking for an electronic circuit designer to create a circuit for a buzzer game that will be used in a visual muscular coordination and precision abilities. Key Requirements: - The circuit will need to trigger the buzzer when a twisted wire is touched by the moving ring. - The circuit should be robust enough to handle repeated use in a game setting. The circuit to buzz and an LED strip illuminate for one second every time the metal ring in the hand of the player touch the twisted wire. After three consecutive times buzz, game will be announced over by a 5 seconds continuous buzz and LED light illuminated. The power source is a 12V AC transformer. Buzzer and led light strip are 12V powered. The picture attached is just to show the game in general. Ideal Skills: - Experien...

I'm seeking an expert in embedded systems and power control systems to help me develop a project using the STM32F407 board. The project involves reading from a Peacefair PZEM-004T-D-P with coil CT(HOT) AC meter and controlling relay outputs based on power calculations. Key Responsibilities: - Read data from three current and voltage sensors. - Develop code for controlling on-board relays based on real power calculations from the PZEM current meter. - Implement control logic for relay outputs based on a threshold-based system. - Develop for a 128*64 matrix display. - Implement user interaction with six buttons. Ideal Skills and Experience: - Proficient in programming for the STM32F407 board. - Familiar with UART communication protocol. - Experienced in developing threshold-based con...

Project Description: We are looking for an expert freelancer to develop a custom watch capable of receiving messages from an online platform and displaying them in tuple format. The watch should cycle through messages one at a time when a button is pressed. The microcontroller does not need to be embedded in the watch; it can remain external, with the watch functioning as the display unit. Features and Requirements: Message Format: The watch will receive a list of tuples (e.g., [(11, "A"), (12, "B")]) from an online platform via Bluetooth. The watch should store these messages locally. Watch Display: The watch should display one tuple (e.g., 11: A) at a time. On each button press, the display should cycle to the next tuple. After the last tuple, it should loop back t...

I'm seeking a professional who can enhance the robustness of my assembly language code, specifically in the interrupt handling area. The main goal of this project is to improve the overall quality and efficiency of the code. Ideal Skills: - Proficiency in assembly language - Experience in code optimization - Strong understanding of interrupt handling - Ability to enhance code robustness Your role will be to analyze the current assembly language code and implement necessary changes to improve its functionality. Please include your relevant experience in your bid.

Por favor, Cadastre-se ou Faça Login para ver os detalhes.

I need a highly skilled and experienced developer to create a simulation of the firmware for the Captain DMA 75T device. The goal is to have an accurate and comprehensive emulation of the real device firmware. Key Requirements: 1. Full simulation of the PCIe device's independent hardware ID (VENID). 2. Customized TLP echo response with 1:1 simulation. 3. Accurate replication of the interrupt logic. 4. Development within a proprietary, non-open source framework. Ideal Skills & Experience: - Extensive knowledge and experience in developing custom firmware for DMA cards, particularly with PCILeech (Lambdaconcept). - Proficient in Vivado for firmware development. - Strong expertise in Windows platform for software development. - Capable of prioritizing and accurately simulating all ...

I'm looking for a professional who can build an Arduino WiFi smart switch for controlling my lights. The control mechanism will be a data processing algorithm with two variable inputs. Key Responsibilities: - Develop a smart switch using Arduino that connects to WiFi - Create a data processing algorithm with two variable inputs for controlling the lights Ideal Skills: - Proficiency in Arduino programming - Experience with WiFi module integration - Strong understanding of data processing algorithms - Prior work with smart home devices is a plus Please share your relevant experience and any similar projects you've worked on in the past.

More details: What is the main purpose of your Arduino project? Home automation Which components will you be using in your home automation system? Which specific feature do you want to prioritize in your home automation system? Energy efficiency (e.g., smart lights, thermostat)

Looking for an Electronics Engineer We need a circuit designed to interface with an ESP32. The circuit should be capable of transmitting and receiving logic 1 and logic 0 commands via a two-wire current loop interface. It must support full-duplex communication, meaning it should also be able to receive responses. Logic Explanation: Based on the attached specifications: 1. Logic 0 ("Space"): Current: Between 0 mA (Minimum) and 2 mA (Maximum). 2. Logic 1 ("Mark"): Current: Between 42.75 mA (Minimum) and 47.25 mA (Maximum). The current loop operates at a nominal 45 mA ±5%. The voltage for the open-loop supply must be between 12V DC (Minimum) and 42V DC (Maximum). Requirements: The designed circuit must handle current regulation for transmitting the ap...

I am seeking a highly experienced circuit design engineer with expertise in digital and analog electronics, proficient in using Eagle for PCB design. The ideal candidate will have a strong background in signal conditioning, low-noise circuit design, and power management for compact, low-power applications. Familiarity with integrating multiple sensors, including PPG, glucose, HRV, and electrolytes, into electronic systems is a significant advantage. The role requires exceptional problem-solving skills, attention to detail, and the ability to deliver efficient, production-ready designs, including schematics, PCB layouts, and prototypes. If you excel in creating innovative circuit solutions and thrive in challenging projects, I would love to hear from you.

I am seeking a trainer to teach middle school students STEM concepts using Arduino. The primary focus will be on hands-on, interactive lessons that make these concepts accessible and enjoyable. A strong background in both STEM and robotics is crucial, as is experience working with this age group. Key Responsibilities: - Develop and deliver engaging STEM-focused lessons using Arduino - Foster a positive and inclusive learning environment - Adapt teaching methods to suit different learning styles and abilities Ideal Skills and Experience: - Proven experience teaching middle school students - Strong knowledge of STEM concepts and robotics - Proficiency in using Arduino for educational purposes - Excellent communication and interpersonal skills

HM Interface Designed by Matlab program will send step motors data from Matlab to Arduino. Control a stepper motor connected to Arduino through Matlab. Arduino sketch file communicates will Matlab program. Program Interface will show and control current angle/step, degrees to Jog, motion jog +/- and X Y Z current position each of joints. On the program Human Machine Interface will have buttons for Teach New Position, Modify Position, call program and delete program, etc. . Program will make Auto Calibration, Manuel Calibration and Show Calibration values for each joints. Program section will be inputs and outputs toggle buttons for entering values servos and digital outputs. MATLAB Program will provide us as design view with written codes not just as .exe file. Program will be open sourc...

I'm looking for a professional with experience in IoT development and CCS protocol to integrate a battery charger with firmware update capability over the air (OTA). The project involves: - Implementing IoT features for control, monitoring and firmware updates of the battery charger. - Ensuring robust authentication measures for secure OTA firmware updates. - Enabling comprehensive data monitoring including battery health status, charging progress, energy consumption, voltage, current and temperature measurements. The ideal candidate should have a strong background in IoT, firmware development, and battery charger systems. Previous work with CCS protocol and implementing security measures for firmware updates will be highly beneficial.

I'm working on a custom project that involves using a stepper motor controlled by an Arduino. The motor needs to be able to rotate a few degrees, stop and then reverse back to the starting point with precision. I need an expert to provide advice on sourcing the correct motor and controller. Key Requirements: - Help in selecting the appropriate stepper motor and controller. - Programming the Arduino to control the stepper motor with precise position control. Ideal Skills: - Expertise in Arduino programming. - Experience in working with stepper motors. - Ability to source appropriate hardware and wiring instructions.

I need to have my Bosch Rexroth drive programmed. This will involve utilizing a closed circuit feedback loop for a pump control system. The pressure sensor will be used for the feedback loop, and the control algorithm will be a PID control. Key Requirements: - Programming of Bosch Rexroth drive - Implementation of closed circuit feedback loop - Use of pressure sensor for feedback - Application of PID control algorithm Hardware: - Please note that I already have the necessary hardware for this project. Ideal Skills and Experience: - Extensive experience with Bosch Rexroth drives - Strong knowledge of closed circuit feedback loops - Proficient in programming PID control algorithms - Familiarity with using pressure sensors in control systems - Prior experience in pump control programming

I'm looking for an expert firmware programmer to help develop firmware for an STM32 embedded project. The main purpose of this firmware is to collect data from a current measurement sensor. The data will be used for real-time monitoring and displayed on an e-paper display. Ideal candidates should have: - Extensive experience with STM32 firmware development - Proficiency in programming for sensor data collection - Knowledge in addressing e-paper display through SPI Your role will involve: - Writing efficient and reliable firmware Schematics for the microprocessor are complete and available. I look forward to your proposals.

I'm looking for a vision expert. The specific area of expertise and the main objective for this project haven't been determined yet, so I'm open to suggestions. Skills and experience that would be ideal for the job include: - Broad knowledge in various aspects of vision science - Experience in providing consultation and advice - Ability to analyze images and design optical systems - Competence in artificial intelligence and computer vision - Ability to deliver comprehensive written reports or software applications Please include in your proposal how you believe you can assist with this project.

I aim to develop a solution that will facilitate data communication between an Arduino UNO and a SIM7600E using AT+COMMAND. The primary data in focus will be temperature sensor readings. Key Responsibilities: - Setting up a reliable connection between Arduino UNO and SIM7600E - Implement AT+COMMAND for effective communication - Design a protocol for transmitting temperature sensor data Ideal Skills: - Solid knowledge of Arduino - Proficiency in handling SIM7600E - Experience in implementing AT+COMMAND - Understanding of sensor data transmissions. Please ensure you can efficiently deliver on these requirements, and provide the mentioned sensor data communication before placing your bid.