Axle ansys trabalhos

Olá, Estou contratando um profissional que tenha domínio no software ANSYS, para fazer umas peças sólidas (pedaço de ferro, etc.), para extrair vídeos e gráficos dessas peças, a finalidade é analisar a propagação de calor nelas.

Preciso de alguem que faça para mim a analise de flambagem no ansys para diferente colunas, determinando a carga critica de flambagem linear e não linear. Algo semelhante a esse trabalho que anexei mas com as colunas que eu estou analisando.

tenho já o desenho do volante no solidworks e agora preciso de uma simulação FEA no ansys que valide meu modelo.

Olá Alexandre, Estou procurando projetista mecânico com experiência em Ansys. Trabalho: Com base em desenhos 2D, deve ser modelado a estrutura no Ansys, realizar o carregamento do modelo, vinculações, interpretação dos resultados e elaboração de relatório técnico/memória de cálculo. removed by admins

Olá, Estou procurando projetista mecânico com experiência em Ansys. Trabalho: Com base em desenhos 2D, deve ser modelado a estrutura no Ansys, realizar o carregamento do modelo, vinculações, interpretação dos resultados e elaboração de relatório técnico/memória de cálculo. (53)98131-4036

Olá Vinícius, Estou procurando projetista mecânico com experiência em Ansys. Trabalho: Com base em desenhos 2D, deve ser modelado a estrutura no Ansys, realizar o carregamento do modelo, vinculações, interpretação dos resultados e elaboração de relatório técnico/memória de cálculo. (53)98131-4036

estou realizando uma monografia em engenharia mecânica e preciso de uma consultoria para o uso da ferramenta ansys. a simulação é utilizando o método FSI-2WEY do transient-strucutal com o fluent para um estudo de uma simulação de um aneurisma

Preciso da programação mediante o método MCRT para modelar a radiação solar no programa ansys fluent UDF, forneço pdf adjunto com mais detlahes.

Bom dia! Estou fazendo doutorado em Eng. Mecânica e preciso de um modelo matemático, desenvolvido em elementos finitos e ANSYS, para comparar os resultados obtidos nesse modelo matemático com os resultados obtidos no laboratório. O objetivo de minha tese é avaliar a adesão entre dois materiais unidos por aspersão térmica. Os materiais não são exatamente colados. Um material (Revestimento- uma liga) é aspergido sobre outro (substrato- aço carbono 1020) pela técnica de aspersão térmica por arco elétrico. Basicamente um arco elétrico derrete a liga (revestimento) e projeta contra o substrato, q ao se chocar com ele se solidifica novamente formando um revestimento. A t...

Por favor, Cadastre-se ou Faça Login para ver os detalhes.

O projeto consiste em realizar análise modal em um casco simples de uma embarcação de 22 metros.

O projeto consiste em realizar análise modal em um casco simples de uma embarcação de 22 metros.

Fazer avaliação no Ansys e o relatório assim como pedido.

Projeto de Máquina para Lavanderia Industrial Trata-se de uma máquina de Lavanderia industrial já está no mercado há 10 anos, com projeto superdimensionado tanto em sua estrutura metálica, bem como carenagem e fechamentos. Precisamos otimizar este...metálica, bem como carenagem e fechamentos. Precisamos otimizar este projeto de modo a reduzir no mínimo 20% em matéria prima. Para isso, buscamos um engenheiro mecânico que esteja atuando na área de projetos com análise Estrutural e Dinâmica com experiência de no mínimo 5 anos baseados no Método dos Elementos Finitos – CAE (Computer-Aided Engineerig) utilizando os softwares consagrados como: Ansys, Nastran, Pat...

Preciso de alguém que faça a análise estrutural de um equipamento industrial de modo a otimizar matéria prima que notadamente está superdimensionado no equipamento atual. Utilizar os softwares de analise estrutural (FEA) para análise de tensões, vibrações e ruídos com softwares consegrados como Ansys, Nastran, Pro-engenier. De preferência que resida em Curitiba ou região.

AMSYS project as discussed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Realizar um projeto acadêmico de um sulcador no Ansys

Private as discussed.

I need a professional with extensive experience in ANSYS who can perform a static structural analysis for me using composite materials. Ideal Skills: - Proficiency in ANSYS software - Extensive knowledge of static structural analysis - Experience working with composite materials - Strong understanding of engineering principles - Ability to interpret complex data Please provide your bid if you are capable of delivering quality work in a timely manner.

I need a specialist to simulate coal-biomass cofiring combustion with ANSYS. The focus will be on HT-EFB as biomass, across various mixing ratios. Key Requirements: - Execute combustion simulation via ANSYS. - Assess these mixing ratios: * 20% coal - 80% biomass * 10% biomass - 90% coal * 30% biomass - 70% coal * 40% biomass - 60% coal - Deliverables should include: * Temperature contour * Mole fraction contour of products * Particle velocity profile/contour Ideal Skills and Experience: - Mastery of ANSYS for combustion simulations - Previous coal-biomass cofiring studies - Clear interpretation and presentation of simulation results The simulation's purpose is to optimize mixing ratios. The coal and biomass properties will need to include proximate and ultima...

I'm looking for a professional who can conduct a combustion simulation for coal-biomass cofiring using ANSYS. The study involves using HT-EFB as the biomass and analyzing various mixing ratios. Key Requirements: - Conduct a combustion simulation using ANSYS. - Analyze different mixing ratios: * 20% coal - 80% biomass * 10% biomass - 90% coal * 30% biomass - 70% coal * 40% biomass - 60% coal - Provide outputs including: * Temperature contour * Mole fraction contour of products * Particle velocity profile/contour Ideal Skills and Experience: - Proficiency in using ANSYS for combustion simulation - Prior experience in coal-biomass cofiring studies - Ability to interpret and present simulation outputs clearly

...and zero deflection at 70 m/s. - Each model will require about 10 minutes for 3D modelling and about 30 minutes for CFD analysis. - Produce a table of results that includes the 3D model, Drag (in N), CD, and a picture of the pressure and velocity flow around the model. - Skills Required: - Engineering - Finite Element Analysis - 3D Modelling - Computational Fluid Dynamics - Ansys...

...Fluid Dynamics (CFD) using ANSYS software to conduct a detailed analysis on an Ahmed Body. Your analysis will focus on: - Aerodynamic drag: I am particularly interested in understanding how the shape of the Ahmed Body influences its resistance against the flow of air. - Mixed flow conditions: The simulation should account for a mixed flow scenario, incorporating both laminar and turbulent flow characteristics. Expected deliverables from the project include: - 2D plots: Visual representations of the flow patterns and forces acting on the Ahmed Body. - Numerical data tables: Detailed, quantitative results of the CFD simulation. Ideal candidates for this project should have: - Proven experience in conducting CFD analyses on similar bodies. - Proficiency in ANSYS software. ...

I need a PCB model evaluated for mechanical shock loads using Ansys Sherlock. The primary goal is to predict potential failure points under conditions typical for industrial robotics. Ideal Candidates Should: - Have a strong background in PCB design and analysis. - Be proficient in using Ansys Sherlock for mechanical shock evaluation. - Possess experience with industrial robotics environment modeling. - We can provide an Altium export for the PCB

I'm seeking a professional with expertise in CDF and FEA testing, particularly for performance analysis and fracture mechanics. The primary tool for this evaluation will be ANSYS. Key responsibilities: - Conducting comprehensive performance analysis using CDF and FEA testing. - Utilizing fracture mechanics for failure prediction. - Employing ANSYS software for all testing and analysis. Ideal skills and experience: - Proficient in using ANSYS for CDF and FEA testing. - Solid background in performance analysis and fracture mechanics. - Previous experience in conducting similar testing projects.

I'm seeking an experienced ANSYS professional to conduct fluid and thermal simulations for performance evaluation under dynamic and thermal conditions. Ideal Skills and Experience: - Proficient in ANSYS, particularly in fluid dynamics and thermal analysis modules. - Strong background in performance evaluation techniques. - Experience working on dynamic and thermal condition simulations. - Ability to interpret and present simulation results clearly. - Expertise in identifying potential design optimizations based on simulation outcomes.

...assistance with a project involving 5 shape memory wires of 0.5mm diameter. The objective is to create a simulation in ANSYS where a PDMS matrix is placed around the wire. The wires must be stretched to their maximum residual strain of 4 percent and then heated to recover that strain. The goal is to achieve a bending motion instead of a linear recovery, with an experimental analysis achieving a bend angle of 30 degrees. Key Tasks: - Model 5 shape memory wires with a 0.5mm diameter and a PDMS matrix in ANSYS - Stretch the wires to a maximum residual strain of 4 percent - Heat the wires to recover the strain - Achieve a bending motion during recovery Ideal Skills: - Proficiency in ANSYS, specifically in static structural simulations - Understanding of shape memory a...

I'm seeking assistance with a thermal analysis of a 3D model in ANSYS, specifically focusing on heat distribution. I have model but it needs a little bit improvement. I have file in .stp format. I need basically a diffusion/dispersion analysis and checking an altering the system if it achieve the requirements or needs further modification. Your tasks will involve: - Running simulations to assess the mixing of hot water with cold water inside a diffuser tank. There are two diffusers top and bottom inside a tank. The tank is insulated so that the process is adiabatic. The water comes to tanks from top diffuser and goes out from the bottom diffuser. - Providing insights and recommendations based on the simulation results. - Assisting with the optimization of the project based ...

I'm seeking an expert in ANSYS fluid dynamics simulation for a continuous casting process who can model the behavior of a liquid under varying temperature conditions and solidification processes. The primary purpose of this simulation is for academic research, so a deep understanding of the relevant physical principles and the ability to deliver precise, detailed results is crucial. Key Requirements: - Proficiency in fluid dynamics simulation software - Extensive knowledge of liquid properties, particularly viscosity, density and solidification processes - Experience in undertaking simulations for academic research Ideal Skills: - Strong analytical and problem-solving skills - Excellent attention to detail - Ability to present complex data in an understandable way

I'm seeking an expert in Ansys who can assist with parameter optimization and data analysis. The primary focus will be on process parameters. Ideal skills: - Proficiency in Ansys for simulation and optimization - Experience in parameter optimization - Strong data analysis skills Key responsibilities: - Conduct simulations and optimize parameters - Analyze data to derive meaningful insights

Estoy haciendo una simulación de un plato perforado tengo todo realizado, la geometría, el mallado y el setup pero en un momento de la simulación en la gráfica de residuales se eleva mucho, tampoco tengo un computador para que se haga el proyecto rápido. I am doing a simulation of a perforated plate. I have everything done, the geometry, the meshing and the setup, but at one point in the simulation the residual graph rises a lot. I also do not have a computer to do the project quickly.

Estoy haciendo una simulación de un plato perforado tengo todo realizado, la geometría, el mallado y el setup pero en un momento de la simulación en la gráfica de residuales se eleva mucho, tampoco tengo un computador para que se haga el proyecto rápido

I am looking for an experienced professional to perform a simulation of a 3D axial flow fan turbomachinery rotor. The m...Contour plots Blade loading distribution Efficiency and performance graphs Any other relevant insights Deliverables: 1. A detailed report including operating curves and analysis. 2. Visualization outputs (e.g., contours, blade loading, etc.). 3. Simulation files for future reference. Preferred Skills: Expertise in turbomachinery simulations Proficiency in CFD tools such as ANSYS CFX, Fluent, or similar software Knowledge of axial flow fan design and analysis If you are confident in your skills and have relevant experience in similar projects, please provide your proposal with a timeline and cost estimate. I look forward to collaborating...

I'm seeking a professional with extensive experience in thermal simulations. The project revolves around a PCB board housed in a plastic enclosure. Key tasks include: - Conducting a detailed thermal simulation to identify potential hotspots on the PCB and within the enclosure. - Providing recommendations to improve cooling efficiency. - Ensuring the selected ma...enclosure. Key tasks include: - Conducting a detailed thermal simulation to identify potential hotspots on the PCB and within the enclosure. - Providing recommendations to improve cooling efficiency. - Ensuring the selected materials can safely withstand the thermal stresses encountered during operation. Ideal candidates will have expertise in using thermal simulation software, with a preference for ANSYS, SolidWo...

I'm seeking someone with expertise in Lead Generation, someone that uses Zoominfo and/or Salesgenie (Data Axle). Target Audience: Private Businesses within these counties of TX: Nueces, Cameron, Hidalgo, and Willacy counties. - Revenue between $500,000 and $1,000,000 - Private entity (Not publicly traded) - Construction, manufacturing operations industries. Data Requirements: - Owner Name and Title - Company Name - Valid E-mail address - URL if available - Location - Revenue - # of employees - Industry Timeline: Please share anticipated timeframe to complete this request. Proof of concept: Must provide valid information and confirm access to tools to retrieve data. Skills and Experience: - Proven experience in Lead Generation. - Access to data tools needed. - Capable...

Milling process simulation by Ansys

Milling process simulation by Ansys

I'm seeking a skilled CFD analyst to evaluate three cambered airfoils at two specific Reynolds Numbers: 166,000 and 638,000. The analysis must be conducted using ANSYS Fluent. Key Requirements: - Proficient with ANSYS Fluent - Experienced in CFD analysis of cambered airfoils - Able to interpret and present results clearly The successful freelancer will have the opportunity to work on a challenging project with potential for future work.

I need a professional who is highly skilled in ANSYS software to help me model 5 concrete, rectangular beams under cyclic loading. I have precise dimensions for the beams. The ideal freelancer for this project should have: - Extensive experience with ANSYS software - Strong background in engineering, specifically in beam modelling under cyclic loading - Ability to understand and work with precise specifications If you meet these criteria and can deliver high-quality models, please get in touch. Thank you!

I'm seeking a skilled professional with experience in ABAQUS Simulia to simulate shoulder movement using two types of prosthetics - reverse and custom made. Key Aspects: - The primary focus of the simulation will be the range of motion of the shoulder with each type of prosthetic. - I have...range of motion of the shoulder with each type of prosthetic. - I have existing 3D models for the prosthetics, so no assistance will be needed in that regard. Deliverables: - The simulation report should include visual animations and numerical data. - Graphs and charts are not necessary. - video of the process Ideal candidates for this project should have: - Proficiency in ABAQUS Simulia or Ansys. - Experience with biomechanical simulations. - Ability to present data in a clear and acc...

... Design Inputs for Support System: Specific structural inputs tailored to Hilti’s product selection for pipe support systems. Requirements Proven expertise in structural analysis of piping systems. Experience with chilled water systems and pipe supports. Familiarity with industry standards (e.g., ASME, local building codes). Proficiency in relevant tools : (CAESAR II, ANSYS, SAP2000). Strong ability to present technical findings in tables, graphs, and diagrams. Proposal Submission Include the following in your proposal: Summary of qualifications and relevant projects. Approach to the analysis and report preparation. Estimated timeline for completion. Proposed fee for the project. Deadline for Submission Submit all proposals v...

I need Electric and Magnetic field plotting using ANSYS methodology. I will provide the following details 1. Transmission tower dimensions 2. Operating voltage value 3. Different current scenarios. I need a 2D cross section of the E-Field and H-Field mapping from source till +100 and -100 metres distance. An example of this is provided in the image attached below.

...recommendations. The vibration analysis report will include frequency-response data, vibration amplitude charts, and recommendations for structural adjustments. 10. Timeline The expected completion time for the project is 14 to 21 days, including CAD modeling, CFD, FEA, and vibration analysis. 11. Additional Notes The freelancer must have experience with CFD, FEA, and vibration analysis tools such as ANSYS or SolidWorks Simulation. Regular updates and communication are required for feedback and revisions. The design must be manufacturable and include tolerances suitable for production....

...designs should be versatile, but maintain a high radiant level of luxury elegance and sophistication. Key Task: *Designing and engineering luxury furniture pieces *Creation and integrating mechanical, mechanism, components, and functionality into each design *3D/4D renderings (inner and outer layered design) *2D designs *CAD ready designs *Sewing/stitching pattern and designs *Structural analysis (ANsys) *BOM and BOL list *Manufacture instructions/guide Key requirements: *Versatility with hands-on expertise and a thorough understanding of furniture design and engineering, with a keen sense for current trends and techniques on a broad variety of luxury furniture production. *Experience in designing upholstered and solid wood (carvings) furniture *Ability to visualize with a keen...

I need assistance with validating a research paper using Ansys. I am currently pursuing my Mtech and have a mid-project review coming up. This task is straightforward and I just need some suitable results to present at my review. The analysis will focus on: - Fluid dynamics , Heat transfer , Phase Change The material under analysis will be: - PV modules, specifically: - Polycrystalline PV modules - PCM ( Phase Change Material) Skills and experience that would be beneficial for this project include: - Proficient in using ANSYS software - Understanding of fluid dynamics , CFD and Heat transfer - Ability to deliver reliable results in a timely manner.

...the most efficient design. The project involves creating CAD models for each AWE system in SolidWorks and conducting CFD simulations using ANSYS Fluent to analyze their performance under various wind conditions. Key Deliverables 1. CAD Models in SolidWorks: o Design detailed 3D CAD models for the two AWE systems:  Kite-Based System  Tethered Balloon (Aerostat) System o Ensure models are optimized for aerodynamic analysis, including critical features like airfoil shapes, tethers, and structural components. o Deliver models in SolidWorks file format (.SLDPRT) and exported compatible formats (.STEP, .IGES) for CFD simulations. 2. CFD Simulations in ANSYS Fluent: o Conduct CFD simulations for both CAD models to analyze:  Lift-to-drag ratios.  Pressure distribution and flow...

I need a skilled web developer to create a modern and minimalist personal portfolio website. The site will showcase my research, publications, skills, and useful resources, primarily to attract academic collaborators. Key Features: - Home Section: A brief introduction and an inspirational quote. - Skills & Expertise Section: Highlighting my technical proficiencies (e.g., LaTeX, CFD, Ansys FLUENT). - Projects & Publications Section: Listing my research highlights, thesis, and journal articles. - Useful Links Section: Featuring academic resources and courses. - Contact Page: With an integrated form for inquiries. - Social Links: To my LinkedIn and faculty page. The design should be simple, professional, and mobile-responsive. I can provide additional content and assets as ne...

I'm looking for an expert who can develop a User Defined Function (UDF) in ANSYS Fluent for analyzing the aerodynamic performance of a foldable flapping wing. The project should be completed within a week. Key Focus: - The primary focus is on the aerodynamic performance of the wing. - Critical parameters for analysis include lift and drag forces, as well as flow patterns around the wings. Refer: Reference: Guerrero, J. E., Pacioselli, C., Pralits, J. O., Negrello, F., Silvestri, P., Lucifredi, A., & Bottaro, A. (2016). Preliminary design of a small-sized flapping UAV: I. Aerodynamic performance and static longitudinal stability. Meccanica, 51, 1343-1367. Video: Refer above, before confirming your bids. Requirements: - The analysis should be done

This UDF (User Defined Function) is designed to model the transpiration phenomena of tomato plants in a simulated environment using ANSYS Fluent. The UDF calculates thermal and moisture exchanges based on environmental parameters such as ambient temperature and relative humidity, considering the plants as porous parallelepiped blocks. The objective is to understand and simulate the impact of climatic conditions on the internal dynamics of the plants. The code initializes the internal temperature and water fraction within the domain's cells. It employs empirical and physical relations to estimate stomatal and aerodynamic resistances, heat flux, vapor pressure difference (DPV), and convection properties based on flow regimes (natural, mixed, or forced convection). The UDF also co...

I'm looking for an expert in ANSYS Fluent and fluid dynamics analysis to perform a PCM heat sink analysis. Key requirements: - Proficient in ANSYS software with a focus on Fluent - Extensive experience in fluid dynamics analysis - Familiarity with PCM heat sink technology - Capable of providing detailed CFD simulations and flow modelling Your expertise will help assess the thermal performance and efficiency of the PCM heat sink under various conditions.