Precision 3D CAD Drawing for Mechanism
€30-50 EUR
Płatność przy odbiorze
Please review the following specifications carefully and provide 3D CAD drawings along with detailed part specifications for each component based on the requirements outlined below.
Ensure all dimensions and components are accurate and precise, ensuring that the Stator, Rotor, and Locks function together seamlessly, allowing smooth rotation of the Rotor in real-world implementation.
Additionally, include all necessary holes and components required to securely connect every part during the final assembly stages.
Any corrections or improvements are much appreciated.
Feel free to reach out if any clarifications are required.
(Please note that THICKNESS can be adjusted or recommended as needed.
No electricity or wiring is involved.)
Main Material: Cast Iron
---
1. Dimensions
STATOR
Inner Diameter: 800 mm
Thickness: 20 mm (Total Diameter: 840 mm)
Width: 410 mm
The Stator will also function as the Housing, incorporating an additional design to integrate Locks on both sides.
Two Main Locks for the Stator (Housing)
Diameter: 840 mm
Thickness: 20 mm
Each Lock must include a center hole to integrate Wheel Bearings with a suitable tightening mechanism.
For Wheel Bearing diameter of 150 mm, ensure the design includes necessary adjustments to securely accommodate and fasten the Wheel Bearings.
---
ROTOR
Diameter: 600 mm
Thickness: 20 mm
Width: 400 mm
Two Locks for the Rotor
Diameter: 560 mm
Thickness: 20 mm
Each Lock must include a center hole to securely accommodate the Shaft and additional components for tightening.
---
SHAFT
Thickness: 50 mm
Length: 1100 mm
The shaft should have a proper keyway or groove for secure and stable connections.
---
BRACKETS
Designed to hold the entire base with two additional separate parts attached to the bracket, positioned on either side.
Positioning and Range of Movement of the Two Additional Parts:
These two parts must allow movement.
Up to 300 mm below and above the Shaft.
Back-and-forth 300 mm.
These two parts can be removed from the main bracket if needed, or one of them can remain attached as requested.
---
2. Gap Requirements
Based on the Stator inner diameter (800 mm) and the Rotor total diameter (600 mm), there will be a 100 mm free gap between the two components.
This gap is reserved for the installation of additional components with screws.
Ensure precise holes are made on both the Stator and Rotor to securely install these components (final hole count to be confirmed).
---
3. Main Locks and Bearings
Each Main Lock must include:
A Wheel Bearing set on both sides to ensure smooth Rotor rotation.
A mechanism to securely fasten the Wheel Bearings.
Four additional holes for attaching necessary components.
---
4. Final Assembly
Include all necessary holes and components for secure part integration during assembly.
Ensure accurate alignment for seamless functionality.
---
Additional Material and Parts:
Thickness: As needed.
Aluminum is used to isolate the interior of the Stator, the Housing locks from the inside, the Rotor, and its locks.
Aluminum Parts:
2 locks, dimensions: 840 mm (or as required).
Multiple aluminum parts to isolate the inner Stator.
Multiple aluminum parts to isolate the Rotor.
2 locks to isolate the rotor.
---
Deliverables
1. 3D CAD Drawings
Detailed 3D drawings of the Stator, Rotor, Locks, Shaft, and Brackets.
Each part must be designed and detailed separately for clarity.
Precise holes in the stator and rotor must begin in the aluminum parts and extend 15 mm into the iron.
2. Part Specifications
Include dimensions, material details, and all components for assembly.
3. Integration Points
Clearly define integration points for connecting all parts during assembly.
Numer ID Projektu: #38905773
O projekcie
55 freelancerów złożyło ofertę za €56 w tym projekcie
Hello, I am a design engineer, I am expert in different 3d products designs so i can do the required design in the required time. Please check my portfolio and reviews. Thanks.
Good Day, looking into your Precision 3D CAD Design for Mechanism Hope you are doing well! It will be my great pleasure to work on your project. I can do your project as per your need, because I already worked on Więcej
Hi there! I am a professional mechanical & product designer in 3d CAD. I have extensive knowledge of 2d & 3d cad, mechanical designs & product design in ( sheet metal, injection molding, plastic, wooden, aluminium, st Więcej
Hi-ya, I have seen your project "Precision 3D CAD Design for Mechanism" and have seen your description that "Note: Please review the following specifications carefully and provide a 3D CAD drawing based on th......" s Więcej
I am a design Engineer focused on 2D & 3D modeling, Simulation, Product design and Stress analysis. Having good skills in mechanical design with software like (AUTOCAD, SOLIDWORKS, FUSION 360, BLENDER and ANSYS). I ca Więcej
✅ Wow. I am familiar with Precision 3D CAD Design for Mechanism. I have completed a similar project a while ago. I would like to share my detailed and first-hand experience through chat. I look forward to worki Więcej
Hello Faton S., While we may be new to this platform, we invite you to click the link in this proposal. It will reveal our extensive portfolio and experience, which we believe are unmatched. We are confident that no o Więcej
Hi there!! I saw that you need detailed 3D CAD drawings and part specifications for components like the Stator, Rotor, Locks, and Shaft. I will ensure precise dimensions and seamless integration for assembly. I specia Więcej
With a commanding array of expertise in 3D Modelling, CAD/CAM, Mechanical Engineering and Solidworks, MAA CAD is fit for this precision task. I have an unrivaled dedication to producing high-quality and accurate engine Więcej
Hello, Our team of experienced American Licensed Engineers is poised to deliver a meticulously crafted 3D CAD design for your mechanism project. We will ensure precision in the dimensions of the Stator, Rotor, and Loc Więcej
GoodMorning, your project "Precision 3D CAD Design for Mechanism" will be done professionally with the exact requirements mentioned in your description that "Note: Please review the following specifications carefully Więcej
Hi there, I can professionally create 3D CAD drawings for the Stator, Rotor, Locks, and Brackets, including detailed specifications and integration points for accurate assembly. I'm an experienced 3D artist, and I pri Więcej
Hello, I carefully read through your project description, and it immediately caught my interest. It's fascinating because I’ve worked on a very similar project before, earning a five-star rating for delivering high-qua Więcej
After Looking and understanding your project description for getting little clarification. I have awesome past experience of designing in your mentioned CAD/CAM, 3D Modelling, Product Design, Mechanical Engineering and Więcej
I can create detailed 3D CAD drawings for the Stator, Rotor, Shaft, Locks, and Brackets based on the provided specifications. I will ensure precise dimensions and accurate design for seamless integration, allowing smoo Więcej
