12v battery charger circuit jobs
I need an experienced circuit analyst to review a simple, mixed-signal circuit diagram that uses transistors and provide suggestions for improvement. The task involves: - Analyzing the circuit diagram - Identifying potential issues or inefficiencies - Recommending clear, actionable solutions to optimize functionality This is a straightforward one-time task, ideal for a professional skilled in electronics or electrical engineering. If you have experience in circuit troubleshooting, particularly with transistors in mixed-signal circuits where component overheating is a concern, and can deliver quick, high-quality results, I’d love to hear from you.
I'm looking for a professional with experience in IoT development and CCS protocol to integrate a battery charger with firmware update capability over the air (OTA). The project involves: - Implementing IoT features for control, monitoring and firmware updates of the battery charger. - Ensuring robust authentication measures for secure OTA firmware updates. - Enabling comprehensive data monitoring including battery health status, charging progress, energy consumption, voltage, current and temperature measurements. The ideal candidate should have a strong background in IoT, firmware development, and battery charger systems. Previous work with CCS protocol and implementing security measures for firmware updates will be highly beneficial...
...components on a copper strip-board for a USB powered torch light. The circuit involves a Capacitor, a diode, two resistors (10ohm) - but this is flexible depending on if the circuit can funcion , an LED, and a PTM. - The main issue lies in component arrangement on the strip-board, which has 10 rails. The USB, which serves as the power source, has four rails. - I have a partial schematic diagram of the circuit, but I'm unsure about the placement of some components. - Specifically, I need assistance with the PTM and power connection. Ideal skills and experience for the job include: - Proficiency in electronics and circuit design - Experience with strip-boards and USB powered circuits - Ability to interpret and work from a partial circuit schemat...
I need to have my Bosch Rexroth drive programmed. This will involve utilizing a closed circuit feedback loop for a pump control system. The pressure sensor will be used for the feedback loop, and the control algorithm will be a PID control. Key Requirements: - Programming of Bosch Rexroth drive - Implementation of closed circuit feedback loop - Use of pressure sensor for feedback - Application of PID control algorithm Hardware: - Please note that I already have the necessary hardware for this project. Ideal Skills and Experience: - Extensive experience with Bosch Rexroth drives - Strong knowledge of closed circuit feedback loops - Proficient in programming PID control algorithms - Familiarity with using pressure sensors in control systems - Prior experience in pum...
I need help with two circuit analysis problems regarding DC circuits, as shown in the provided figures. Tasks: 1. For the first circuit (FIGURE 1): - Calculate the value of the current through a given 11 V battery. - Calculate the power dissipated in three specific resistors (R1, R2 and R4). 2. For the second circuit (FIGURE 2): - Determine the current (i) flowing in a 30 Ω load using two different methods: a) Thévenin’s theorem b) The superposition theorem - Calculate the values of three inductors present in the circuit. - Calculate the complex form of the voltage across the load using any method. Requirements: - I need the answers typed in a word document file. - Detailed step-by-step solutions are requir...
I am seeking a seasoned ETAP professional proficient in conducting various power system studies, including load flow, short circuit, relay coordination, harmonics, and arc flash analysis. The primary focus will be on system design and optimization through arc flash analysis. Key Requirements: - Extensive experience with ETAP (Electrical Transient and Analysis Program) - Proficient in load flow study, short circuit study, relay coordination, harmonics, and arc flash analysis - Ability to provide system design and optimization recommendations based on analysis - Knowledge of safety standards and regulations related to arc flash Ideal Skills: - ETAP Power System Analysis - Electrical Engineering - System Design and Optimization - Safety Standards Compliance - Relay Coordinatio...
I need a CFD simulation expert to model a battery pack using the MSMD model, focusing specifically on thermal management through a phase change material cooling system. Key Requirements: - CFD Simulation experience, particularly with battery packs. - Proficiency with the MSMD model. - Understanding of thermal management strategies. - Experience with designing cooling systems using heat pipes. - Knowledge of phase change materials and their application in cooling systems. Your task will be to assess the cooling system's design and optimize it for effective thermal management.
I'm in need of a car prototype incorporate important aspects related to the chassis, motor, and battery within the interior layout. Ideal Skills and Experience: - Expertise in automotive design and engineering - Experience in prototype development - Strong understanding of exterior design and aesthetics - Knowledgeable about chassis, motor, and battery integration - Ability to create prototypes for design showcases
I'm in need of a skilled PCB designer who can create a comprehensive PCB design from my provided circuit in a PDF format. The primary goal for this project is product development, so the design should be suitable for that purpose. Key Tasks: - Interpret and translate the provided circuit information into a functional PCB design. - Ensure the design is compatible with Proteus 8 Demonstration for simulation purposes. Ideal Skills: - Proficient in PCB design software, with experience in Proteus 8. - Understands the intricacies of design for product development. - Capable of creating both SMD and Through-hole designs as needed. Note: The specific types of components or size constraints for the PCB design have not been determined yet, so flexibility and adaptability are k...
My car's negative battery cable has snapped at the grounding connection. I need a skilled freelancer to assist with this. The job involves crimping two ring terminals onto the broken ends of the cable so that I can bolt them together at the grounding point. The car is currently located on street parking and I'm in need of a professional who can bring the necessary tools and materials for this repair. Key Requirements: - Experience in crimping ring terminals - Ability to work in a street parking setting - Provision of necessary tools and materials for the repair. PLEASE SEE ATTACHED PICTURE of what the finished job should look like.
I need a professional to redraw my current electrical circuit. The new version should be of better quality and formatted as a PDF. The circuit design should remain unchanged, but it should have a moderate level of detail. Ideal skills for this job include: - Proficient in circuit design software - Attention to detail - Able to deliver in PDF format - Able to maintain the same design
I'm in need of a sophisticated Battery Management System (BMS) for my Lithium battery packs, specifically 7s and 10s configurations. Key Requirements: - The BMS needs to manage the simultaneous charging and discharging of the battery packs, or prevents charging and discharging between battery packs. The re-used battery packs already have their 10s or 7s BMS. - Communication protocols are to be discussed, so flexibility and expertise in various systems is a plus. - Additional features required include: - Temperature monitoring - State of Charge (SoC) estimation - Fault detection and notification Ideal skills and experience for this job include a strong background in BMS development, extensive knowledge of Lithium battery technology...
I'm looking for a professional with experience in long wave RFID programming for a special project. The task involves developing a selection gate for horses tha...for the range of transponder recognition and the opening times. The RFID gate will be used primarily in an outdoor paddock. Thus, the RFID hardware must meet heavy-duty and weatherproof standards. Additional features required for the gate include: - A battery backup system. - Provisions for remote monitoring. Ideal candidates for this project should have: - Proficiency in long wave RFID programming. - Experience with creating hardware for outdoor use. - Ability to design with CE compliance in mind. - Skills in integrating features like battery backup and remote monitoring. - Ideally, fluency in German to fac...
...primary focus will be creating circuit layouts. The draftsman should be capable of producing detailed, precise wiring diagrams with full specifications and annotations. Key Requirements: - Proficiency in AutoCAD, particularly in electrical drafting - Extensive experience in creating circuit layouts - Ability to produce detailed wiring diagrams with full specifications and annotations - Strong attention to detail and accuracy in technical drawings - Good understanding of compliance with project specifications This project requires someone who can transform design concepts into accurate, scalable 2D and 3D representations, ensuring clarity and efficiency in the designs. Please provide samples of your previous work in electrical AutoCAD drafting, particularly circuit...
I need a basic weight measuring system designed using Arduino. The system will consist of a 10 kg load cell (preferably HX711), a 4-digit 16x2 LCD display, and a numeric keypad for manually setting the weight limit. Key Features: - Display weight data on a 16x2 LCD - Use of HX711 load cell - Manual limit setting via numeric keypad - Real-time w...and weight measurement systems - Knowledge in interfacing LCD displays and keypads with Arduino - Ability to design simple prototypes Please note that the finished system should be able to compare real-time weight data with the manually set limit. The alarm system should be straightforward, requiring a simple push button to reset. NOTE : Look/Appearance in not hard requirement in the protoype, circuit wooden board and soldered wired are ...
...text. - **Secondary Font:** A lighter sans-serif font (e.g., **Open Sans Regular**) for the tagline "Tech-Driven Education." - **Visual Balance:** Use contrasting weights for the company name and tagline to maintain hierarchy and readability. --- ### **5. Iconography** - **Symbol Concept:** - A stylized **"L"** as the central icon, integrated with elements like: - **Circuit patterns** to represent technology. - **A book or learning shape** to emphasize education. - **An upward arrow** for growth and advancement. - **Design Approach:** - The icon should appear sleek and modern, with sharp edges and subtle gradients to give it a tech-inspired feel. - The "L" could subtly resemble an open book with digit...
I'm seeking an expert in thermal analysis and materials science to help with a comprehensive project. 1. Thermal Gradient Analysis: - The main focus will be on quantifying thermal gradients within individual Li-ion cells and across modules in extremely low winter conditions. - You will need to assess the impact of these gradients on the lifespan of the battery, as this is my primary concern. 2. Material and Design Optimization: - I want you to explore advanced thermal interface materials (TIMs) and innovative module designs to minimize the thermal gradients. - This includes investigating novel materials with better thermal conductivity that can still be compatible with existing Li-ion technologies. 3. Thermal Management Strategies: - The development of ta...
I'm looking for an electronic engineer to design a circuit for a digital level. This level should have an LED illuminating when a 2% fall is detected. Key Requirements: - Medium Precision: The digital level doesn't need to be laser-precision, but it should be able to measure with medium accuracy. - LED Display: The display should be an LED that is visible in sunlight. It should activate when a 2%, 2.5%, or 3% grade is achieved. - Power Source: The unit should be powered by an 18v Milwaukee tools battery. - Brightest LEDs: The use of the brightest LEDs available is essential for this project. Ideal Skills and Experience: - Electronic circuit design: Proven experience in designing electronic circuits is a must. - Knowledge of LED technology: Familiarity with ...
...requirements. The original idea is starting from a existing CM5 carrier board ‘open source’, and modify it to add/remove elements, also ‘open source’. Most of the requirements can be found in any CM5 carrier board available with a public license, for exampe CMIO from raspberry pi. Description of the elements, interfaces and other requirements follows • Maximum board size 100mmx200mm aprox. • Power souce 12v, protected and converted to other DC (present in CMIO) • USB-C with mini USB conector for programming (present in CMIO) • USB 3.0 (present in CMIO) • Ethernet (present in CMIO) • CANBUS • PCIe (present in CMIO) • SD card slot (present in CMIO) • eDP video signal + backlight • AIS class B (from other o...
...Strong knowledge of quality standards for consumer-grade and medical-grade wearables. Scope of Work: Review and optimize our existing prototype design. Provide actionable insights to overcome current development challenges. Advise on long-term scalability, production design, and supply chain management. Ensure the design meets high quality standards and durability benchmarks (e.g., waterproofing, battery life, sensor accuracy). Budget: Up to ₹75,000 for initial R&D consultation phase. Engagement Details: Freelance/Consulting role with milestone-based deliverables. Flexible hours with collaborative communication. How to Apply: Please share: Relevant project portfolio showcasing experience with MAX86174A and similar wearables. Brief plan on how you will assist in overcoming...
I need a project focusing on the charge/discharge cycles of electrochemical batteries. You will be required to simulate these cycles using Simulink and perform calculations based on the project prompts. Ideal Skills: - Proficiency in Simulink - Strong understanding of electrochemical batteries, specifically charge/discharge cycles - Abil...batteries. You will be required to simulate these cycles using Simulink and perform calculations based on the project prompts. Ideal Skills: - Proficiency in Simulink - Strong understanding of electrochemical batteries, specifically charge/discharge cycles - Ability to perform complex calculations Experience: - Prior experience with modeling or simulating battery systems - Familiarity with academic or engineering projects focused on batter...
...Requirements: - **Type**: I need a comprehensive solution that includes Bluetooth, Wi-Fi, and NFC beacons. - **Features**: The beacons should have long battery life, wide range, and customizable messaging capabilities. They're expected to cover a broad spectrum of use cases, from retail promotions to event management and proximity marketing. - **Primary Use Case**: These beacons will be utilized across all potential scenarios. Ideal Skills and Experience: - Proven track record in sourcing high-quality advertising beacons. - Strong understanding of Bluetooth, Wi-Fi, and NFC technologies. - Experience in evaluating product features such as battery life, range, and messaging customization. - Ability to provide a comprehensive solution for various marketing needs. I ...
I’d be delighted to work on designing the 3 additional CanLiFe Battery labels, redesigning the Torque Starter and SunSaver Battery labels (once I receive the current designs), and creating the new brand labels similar to the CanLiFe Golf Cart ones. Could you please share the current designs and any specific requirements or preferences you have for the new labels? This will help me ensure the designs align perfectly with your vision. Looking forward to your reply and ready to get started!
I'm looking for a skilled Python developer with expertise in photonic circuit design. The primary output of this project should be GDSFactory code for the circuit. The use of the Photonics library is a must for this task. Ideal Skills: - Proficiency in Python - Experience with photonic circuit design and GDSFactory
...(Not Required but Nice to Have): 6. Battery Optimization Software: • When the tablet detects the charging cable is unplugged: • Automatically dim the screen to the minimum brightness. • Disable LTE connectivity. • When the cable is reconnected, the tablet should restore its previous settings. Technical Details: • The application will run on Lenovo Tab M10 tablets. • It should have an intuitive and user-friendly interface for taxi passengers. • It must operate seamlessly in a taxi environment, considering limited supervision. Deliverables: • A fully functional application with the described features. • Clear documentation for setup and operation. • Remote management capabilities for ads and quizzes. • (Optional) ...
I am seeking multiple motivated lead generators and appointment setters for a pay-per-meeting role, with an attractive OTE of $1500/month for the right candidates. Your main task will involve targeting commercial properties in the U.S. that have parking spaces and may be interested in installing EV Chargers using government funding. Key Responsibilities: - Cold calling businesses from Google Maps using our provided dialer - Engaging in meaningful dialogues with potential clients - Utilizing our provided scripts that is proved to work and our most-common objection guide that is already proven to answer to the most common questions our clients will ask you. Ideal Candidate Qualities: - Exceptional ability to handle objections - Proactive and takes initiative - Excellent communication sk...
I'm seeking an experienced electronics engineer to design and prototype a circuit board for a research and development project. This circuit board will be integral to a user-interactive interface, so experience with similar projects is crucial. Skills and experience required: - Proficient in designing circuit boards with microcontrollers, sensors, power regulators, servo motors, buttons, and displays. - Previous experience in creating user interaction interfaces. - Strong understanding of power electronics. - Ability to provide comprehensive design, schematic, and prototype. - Ability to write embedded code for the system processing Please provide examples of similar projects you've completed in your proposal.
...in need of an experienced appointment setter who can help my company secure meetings with businesses looking to install EV chargers in their parking spaces. Key Responsibilities: - Cold calling various businesses and commercial properties across the US. - Gathering key information during calls, particularly the decision maker's contact details. - Setting up appointments for potential EV Charger installations. Ideal Qualities: - Prior experience in cold calling in US is a must. - Strong communication skills are essential to convey our business proposition effectively. - While not necessary, knowledge about EV chargers would be an added advantage. Your role is critical to our business expansion in the EV charging installation sector. We are offering a pay-per-me...
I am in need of a skilled professional to assist me with the digital circuit design for a control system. The specific type of control system has yet to be determined, so flexibility and creativity in design will be essential. Ideal candidates should have significant experience and skills in: - Digital Circuit Design - Control Systems Engineering - Utilizing Microcontrollers, Sensors, and Actuators in Circuit Design - Conceptual Design, Detailed Design, Testing and Validation Your expertise will be invaluable in bringing this project to fruition. Please be prepared to provide a portfolio of similar projects you have successfully completed.
Description: We are looking for a creative and detail-oriented 3D designer to develop a durable, aesthetically pleasing case for an electronic device featuring an e-paper display. The design must ensure easy assembly, support both vertical and horizontal stacking mechanisms, and be optimized for 3D printing. Responsibilities: - Design a compact, lightweight enclosure for the Lilygo T5 2.13 and its battery. - Incorporate functional openings for USB ports and power switches. - Develop a mechanism for securely stacking up to three devices vertically and horizontally. - Ensure the case is optimized for 3D printing, using software like Fusion 360. - Ensure the case is durable, easy to assemble, and aesthetically pleasing. Ideal Candidate: The ideal candidate will submit a proposal inc...
I am looking for someone who can help me create a circuit diagram (using a breadboard) in conjunction with an RFID reader and a haptic motor, along with the coding. I believe it is pretty easy to do for most but for the life of me I cannot figure it out- likely trying to overthink it. I have an engineering degree, but it's in a very different field, although I wish I would a have considered this field instead as it seems a lot more fun! The parts I have are: 1. Adafruit Metro Mini 328 V2 - Arduino-Compatible - 5V 16MHz (STEMMA QT / Qwiic) [ID:2590] 2. Adafruit DRV2605L Haptic Motor Controller - STEMMA QT 3. Lithium Ion Polymer Battery - 3.7v 1200mAh 4. PowerBoost 500 Charger - Rechargeable 5V Lipo USB Boost @ 500mA 5. RFID-RC522 I need 1. A diagram connecting t...
...Induction Heating. The circuit and values for the capacitor and inductor in the resonant tank are provided. The project requires the MOSFETs to be working in pairs as it is a full bridge. Key Requirements: - Measurement blocks for the current on the inductor and the voltage passing through the capacitor - Selection of appropriate values for the MOSFETs, pulse generators and the voltage source - Demonstration of the effect of before and after using the ZVS/ZCS on the MOSFETs through graphs - Proper value selection for the matching inductors - Conducting open-circuit and closed-circuit tests by adding a resistor and displaying the power rating on it - Explanation or show the formulas used to get each value for each component I will need your assistance to understand...
...units at a time. - High fire resistance and good insulation. - Prefab, but not based on containers. Deliverables: - Architectural plans - Civil plans - Bidding documents stating intentions, expectations, conditions and BoM - Proposed project plan with Gantt chart in MS Project and WBS in MindManager - Proposed contract conditions for general contractor - Electrical plans including PV solar and battery plans - Fire Protection plans - Interiors plans (kitchen, staircase drawers, built-in cabinets) - Landscape plans (front and backyard) - Mechanical plans (HVAC) - Plumbing plans - Equipment plans - Resource plans - Structural plans - Renderings with two images per room, two images of the front yard, two images of the backyard, and one aerial view. - Assistance in sourcing materials...
...assistance with a wide range of digital tasks, such as: • Setting up smartphones, tablets, and computers. • Troubleshooting Wi-Fi connectivity or device issues. • Installing and configuring software (e.g., email, social media, photo organization tools). • Teaching basic digital literacy (e.g., online navigation, password management). • Perform minor hardware repairs (e.g., screen replacements, battery swaps for smartphones). Desired Qualifications: • Strong technical knowledge of common devices and platforms (e.g., Windows, macOS, Android, iOS). • Exceptional communication skills with the ability to simplify complex tech concepts. • Patience and empathy, particularly when working with non-tech-savvy clients. • Reliable transp...
...Production-ready Gerber files for PCB manufacturing. A complete Bill of Materials (BOM) with cost estimates. Testing and calibration reports verifying the prototype’s functionality. Key Design Requirements Power System Dual Power Input: Solar Input: 12V from an 80W solar panel, with integrated charge controller and priority logic. DC Input: 12V external power supply, with solar taking priority when available. Battery Backup: SLA Battery: 12V 50Ah, providing 2-3 hours of charging at full load. DC-DC Conversion: Centralized step-down conversion (12V to 5V) with >85% efficiency. USB Ports Configuration: 10 fast-charging ports (QC 2.0/3.0). 10 standard 5V/2.4A ports. Port Placement: All ports must be accessible from one sid...
...in need of an experienced appointment setter who can help my company secure meetings with businesses looking to install EV chargers in their parking spaces. Key Responsibilities: - Cold calling various businesses and commercial properties across the US. - Gathering key information during calls, particularly the decision maker's contact details. - Setting up appointments for potential EV Charger installations. Ideal Qualities: - Prior experience in cold calling in US is a must. - Strong communication skills are essential to convey our business proposition effectively. - While not necessary, knowledge about EV chargers would be an added advantage. Your role is critical to our business expansion in the EV charging installation sector. We are offering a pay-per-me...
... and reliable circuit board for our innovative medical pain relief device. The device combines TENS (Transcutaneous Electrical Nerve Stimulation) and ultrasound mechanisms to deliver effective pain relief. Responsibilities: 1. Design and develop the schematic and PCB layout for the device. 2. Ensure the design integrates both TENS and ultrasound functionalities seamlessly. 3. Optimize the PCB for size, power efficiency, and reliability. 4. Provide Gerber files and other required outputs for manufacturing. 5. Create a prototype design for initial testing and validation. 6. Adhere to medical device standards and safety regulations. Requirements: Proven experience in PCB design, especially for medical or wearable devices. Knowledge of TENS and ultrasound circuit...
I'm seeking an expert in thermal management systems to enhance the performance of a Lithium-ion battery in an electric vehicle. Key Responsibilities: - Design and implement a battery thermal management system aimed at improving the performance of the battery during vehicle operation. Ideal Skills and Experience: - Profound knowledge and experience with Lithium-ion batteries - Proven track record in designing thermal management systems, preferably for electric vehicles. - Strong understanding of performance optimization for battery systems. Your expertise will be crucial in ensuring the efficient operation of the battery, ultimately contributing to the overall performance of the vehicle.
I'm looking for an expert in battery modeling with a focus on Lithium-ion batteries, specifically for electric vehicles (EVs). The key aspect of the modeling should be thermal modeling. Skills and experience needed: - Proficiency in battery modeling, particularly with Lithium-ion batteries. - Deep understanding and experience in thermal modeling. - Previous work with electric vehicle battery systems preferred.
I need a skilled Home Assistant expert who can read data (MODBUS) from my Deye hybrid inverter using Raspbery PI besides Inverter and then present all information on a small LCD screen (under 10 inches) in my living room (sending the data to the screen using Zigbee). Key Requirements: - Display of battery status and energy consumption - Use of color-coded indicators for energy consumption - Real-time updates on the LCD screen Ideal Skills: - Proficient in Home Assistant setup and configuration - Experience with Deye hybrid inverters - Ability to program color-coded indicators based on energy consumption - Knowledge in interfacing Home Assistant with LCD screens
I'm seeking a professional with expertise in Analog Electronics to help me solve a variety of fundamental exercises and problems, inclu...expertise in Analog Electronics to help me solve a variety of fundamental exercises and problems, including those related to transistor circuits, operational amplifiers, and RC, RL, and RLC circuits. Key Responsibilities: - Assist in solving problems related to circuit design, signal processing, and component analysis - Provide guidance on all aspects of transistor circuits, including biasing and stability, amplification, and switching Ideal Candidate: - Extensive knowledge and experience in Analog Electronics - Proficient in circuit design and analysis - Excellent problem-solving skills - Able to explain complex concepts in a simpl...
I'm looking for a professional with expertise in AutoCAD to create an Erection Key Diagram for a 132kv substation. Key Requirements: - The diagram must be formatted in AutoCAD. - It should adhere to IEC Standards. - The diagram needs to incorporate specific components: Transformers, Circuit Breakers, and Busbars. Ideal Skills: - Proficiency in AutoCAD. - Knowledge and experience with IEC Standards. - Prior experience in designing substation diagrams.
I have a power amplifier that's not producing any sound. I've already checked the cables and connections but the issue persists. I'm looking for an electronic engineer with experience in diagnosing and fixing power amplifiers. Ideally, you should have a strong background in circuit analysis and repair, and be skilled in troubleshooting transistors and ICs. Please message me if you're interested in helping me restore my amplifier to full functionality.
I'm obtaining a permit from the City of Phoenix to add a 50A dedicated circuit for a pool heater. The City of Phoenix requires: (1) Electrical Load Calculation that will ultimately show at/below 200A for my existing setup + new pool heater (Pentair Ultratemp 140 H/C) (2) Electrical Panel Schedule showing existing + new circuits (NOTE: We have a 200A main panel, then a 125A sub-panel connected, see attachments). Seeking an expert to take my attached documents along with the City's examples and share (1) Electrical Load Calculation and (2) Electrical Panel Schedule that I can submit right to the City of Phoenix along with my permit application. Key Requirements: - Analysis to include lighting and outlets, HVAC systems, and all of my appliances. - Ability to follow stand...
...Comprehensive Testing: Thoroughly test all app features, functionalities, and user flows on your iOS device. This includes: Navigation and UI/UX testing across different iOS versions and device screen sizes (please specify your device and iOS version in your application). Functional testing of all features and user interactions. Performance testing (e.g., app launch time, responsiveness, memory usage, battery consumption). Usability testing, identifying areas for improvement in user experience. Testing under various network conditions (Wi-Fi, cellular, offline). Detailed Bug Reporting: Document all bugs and issues found with meticulous detail, including: Clear and concise descriptions of the issue. Precise steps to reproduce the bug. Screenshots or screen recordings demonstrating...
...services to global clients, primarily focused on Printed Circuit Board (PCB) design and manufacturing. Our uniqueness lies in designing, prototyping, and developing diverse electronic hardware in a customized and highly precise manner. As a firm, we can transform your ideas or functional diagrams into electronic circuits or products that enhance the functionality of electronic devices. With a team of proficient engineers, we create exceptional electronic designs. Role Overview: R&D Engineer Location: Chennai, Tamil Nadu Key Responsibilities: • Product Development & Redesign: Develop new electronic products and redesign existing ones. Conduct research and testing on product concepts to improve functionality and performance. • Circuit Design: Design and dev...
I’m in need of a professional who can design a Switching Mode Power Supply (SMPS) for industrial use. The requirements for the power supply are as follows: - Input: 12-30V DC - Output: 19.5V - Current: 10.3A Key Features: The power supply needs to be robust and reliable, equipped with: - Overload Protection - Short Circuit Protection - Temperature Control While there are no specific certifications or standards required at this moment, it's important that the design considers the necessary industry standards for safety and performance. The ideal candidate should have extensive experience in power supply design, particularly for industrial applications, with a strong understanding of SMPS technology.
I'm in need of a specialist who can create a detailed design with specifications for an electric two-wheeler wiring harness. Your tasks will encompass: - Integrating various components into the wiring harness design including: - Battery connections - Lights and indicators - Motor controller - Instrument cluster - Telematics - Hub motor - More - Ensuring the design adheres to electric vehicle standards. Ideal candidates should possess: - Extensive experience in designing wiring harnesses, preferably for electric two-wheelers. - In-depth understanding of electric vehicle standards. - Proficiency in creating detailed designs with specifications.
I'm in need of a seasoned MATLAB and Simulink specialist who can assist me with a project involving the design and development of a 20kV and 50kHz system for generating RF Cold Plasma. Key Responsibilities: - Create a comprehensive sim...in need of a seasoned MATLAB and Simulink specialist who can assist me with a project involving the design and development of a 20kV and 50kHz system for generating RF Cold Plasma. Key Responsibilities: - Create a comprehensive simulation of the system in Simulink - Ensure the simulation accurately reflects the intended circuit design Ideal Skills and Experience: - Proficient in MATLAB and Simulink - Prior experience with RF Plasma simulation preferred - Strong circuit design understanding - Excellent analytical skills for interpret...
