Esp32 i2s arduino jobber

I will get the hardware for the project using this amount

Job Request: BLE Mesh System with ESP32-C3 and SIM7080 Integration Hello I am looking for a developer to create a complete firmware solution based on the following hardware and requirements: Hardware: • ESP32-C3 • SIM7080 Module • Motor Controller • Two Limit Switches System Requirements: 1. BLE Mesh Implementation: • Develop a BLE Mesh system with client-server architecture. • Each server node must function as a relay. 2. Command Flow: • I want to send a command to the client node via the SIM7080 module. • The client should broadcast the command to all server nodes. • Each server will relay the command further until the entire mesh network has received it. • Once all servers confirm receipt of the command, I s...

Programa para Arduino controlar motores de passo, definir a posição HOME e executar programa.

Arduino Microcontroller Code for Multi-Floor Lift/Elevator System We are seeking an experienced Arduino developer with prior expertise in designing and implementing multi-floor lift/elevator systems for commercial or professional applications. The ideal candidate should have a **ready-to-use, tested, and proven program** suitable for deployment. Requirements: - Working Code: Must have a functional Arduino program for a multi-floor elevator/lift system. - Experience: Preference will be given to candidates with prior implementation in professional or commercial projects. - Urgency: Immediate availability and readiness to provide the solution on an urgent basis. - Documentation: Clear documentation of the program, including setup and configuration. - Hardware Knowledge:...

...conjunction with an RFID reader and a haptic motor, along with the coding. I believe it is pretty easy to do for most but for the life of me I cannot figure it out- likely trying to overthink it. I have an engineering degree, but it's in a very different field, although I wish I would a have considered this field instead as it seems a lot more fun! The parts I have are: 1. Adafruit Metro Mini 328 V2 - Arduino-Compatible - 5V 16MHz (STEMMA QT / Qwiic) [ID:2590] 2. Adafruit DRV2605L Haptic Motor Controller - STEMMA QT 3. Lithium Ion Polymer Battery - 3.7v 1200mAh 4. PowerBoost 500 Charger - Rechargeable 5V Lipo USB Boost @ 500mA 5. RFID-RC522 I need 1. A diagram connecting the parts - I am using a bread board 2. Coding that would allow the use of the RFID tag to operate the...

I need an Arduino Uno project that regulates the temperature of my smoker at 225 degrees. The control is achieved by either opening or closing the air vents, which are mechanically connected to a robust servo motor with a 70 kg power capacity. Key Requirements: - The control of the air vents should be incremental. That is, the vents should not simply be in an on/off state, but able to be adjusted in small increments to ensure precise temperature control. - A mobile app will serve as the user interface. This will need to allow for easy control and monitoring of the smoker's temperature. Components I Have: - I already have the servo motor for this project. Ideal Skills: - Proficiency with Arduino programming - Experience in creating mobile apps for hardware ...

Schematic and Pcb design of a small board

I am looking for an experienced developer to create a two-wheeled mobile robot using an ESP32 with fuzzy control for navigation in a dynamically changing and unknown environment. Below are the key requirements for the project: 1. Code Development: - The robot's control should be based on the NodeMCU platform using ESP32 hardware. - The code should be readable and easily modifiable, not a hardcoded solution. - Fuzzy control should be implemented for stabilizing and navigating the robot. 2. Robot Frame Design: - A 3D printable frame should be designed to house all the robot’s mechanical components. - The frame must allow the robot to balance on two wheels. 3. API and Mobile App Integration: - The mobile app must be implemented using Angular and Ionic. - Develop...

...source code is already in a „Rpi-portable” version, i.e. stripped of Sharc peripherals-specific code Hardware concept: • Use of two USB to I2S/SPDIF UAC2 converters like this: ((as input Converter1 and output Converter2) or (as output Converter2) • I2S pins of Converter 1 will be connected to RPi GPIO header and feed input audio signal via the standard RPi I2S port • Converter 2 will be connected to a Rpi USB port and will output audio signal via ALSA USB audio device Scope of work - 3 main tasks:

To transition your scoreboard project from Arduino to Raspberry Pi, you’ll need to interface the 7-segment displays directly with the Raspberry Pi’s GPIO pins, utilizing shift registers to manage the displays efficiently. Here’s a step-by-step guide to assist you: 1. Understand the Current Setup: • Review your existing Arduino-based configuration, noting how the Arduino interfaces with the 7-segment displays and shift registers. 2. Select Appropriate Shift Registers: • The Texas TPIC6B595N shift register is commonly used for such applications. It allows serial input and provides parallel output, enabling control of multiple outputs with limited GPIO pins. 4. Develop the Software: • Programming Language: • Python is a suitabl...

i will do car tracking using the Arduino ide

...Display Product Information: The scanned data will be shown on a user application and a hardware display. Provide Audio Feedback: The hardware will include a speaker for notifications or feedback. Key Requirements Hardware Development Selection and configuration of QR code scanner, display screen, speaker, and Wi-Fi module. Integration of hardware components using platforms like Raspberry Pi, Arduino, or other suitable alternatives. Backend Development Design and implementation of a database to store product information (e.g., MySQL, MongoDB). Development of secure and efficient APIs for data exchange between the hardware, database, and user application. Frontend Development Creation of a user-friendly mobile app (iOS/Android) to display product details in real-time. Development ...

I need a PCB designed and laid out for a medium-sized consumer electronics product. The PCB should be as small as possible - ideally ~50mm x 50mm. Key Requirements: - Design a PCB suitable for consumer electronics...high-quality Gerber files I have prototyped with a breadboard and am now doing the same with a prototype PCB but want to get a proper PCB layout sorted with a gerber so I can get a professionally made up PCB for testing. I have a drawing of all the components and connections (see attached) but no experience of laying out a board. Not entirely sure how many layers I need/etc. Board includes: 1x Arduino Nano ESP32 1x MCP6002 2x 5V switched relays (currently using a pre-made board for this which has some other minor components) 16x resistors 4x capacitors 12x scre...

I...seeking a programmer to finalize the coding for my two-wheel line follower module, which utilizes an ESP32 S3. This project involves making the module controllable via a mobile app, specifically Dabble or MIT App Inventor. Key requirements: - Completion of the provided code to ensure compatibility with a Bluetooth-based app. - Implementation of the line-following functionality. - Use of Infrared (IR) sensor for navigation. The project will involve working from a shared schematic and partially completed code. The ideal freelancer will have: - Extensive experience with ESP32 S3 programming. - Proficient in PlatformIO or C++ - Strong coding skills to complete the project efficiently. Note: Arduino ide may not be sufficient for this task therefore esp idf or platf...

I'm looking for an expert in MATLAB to create a simulation for a 3-4 Degree of Freedom (DOF) robotic arm. Key Aspects: - The primary purpose of this project is educational, so the simulation should be designed with a focus on teaching and demonstrating robotic arm principles. - The simulation should be accurate in movement. Ideal Skills: - Extensive experience with MATLAB - Background in robotics - Teaching experience or understanding of educational software design Please note that the project may involve some back and forth to ensure the simulation meets educational standards, and your patience and ability to communicate complex concepts simply will be key to our success.

I am seeking an experienced deve...user-friendly interface for managing orders, without any initial need for POS integration. Additionally, the system will require hardware support for ESP32-based setups, which will be used for microphones and speakers. Key Features: - Voice recognition for both phone and table-based orders. - A straightforward dashboard for order management, or use of ready made like Gloria Food. Ideal Skills and Experience: - Prior experience with AI and voice recognition systems, especially Chatgpt Api. - Familiarity with Azure STT/TTS services, or similar. - Expertise in creating user-friendly interfaces. - Knowledge of hardware compatibility, particularly with ESP32, or similar. Please include your experience, estimated timeline, and cost ...

I need a skilled Arduino professional to design a compact, wireless device for me. This device will blink an LED light on a predetermined date, operating on a long-lasting battery. Key Requirements: - The device should be suitable for indoor use. - It needs to be as small and compact as possible. - Experience with Arduino is a must. - Prior work with designing battery-powered devices is preferred. - Knowledge of LED circuitry is desirable. - Understanding of timing mechanisms for the LED blinks. - Ability to ensure efficient power usage for long battery life.

...microchip for UART, SIM800L (GSM), and NEO-6M (GPS). The design should also accommodate a buzzer, mini LEDs, and USB-C charging, with provisions for battery integration (details to be finalized). Key Tasks: - Optimize the antenna design for GSM and GPS to ensure the best performance. - Create compact and efficient layouts that can withstand the rigors of a prototype. - Transition existing code from ESP32 to STM32. Key Considerations: - The primary focus of the PCB design is compactness. The smaller the PCB, the better. - The IoT device will be powered by a rechargeable battery, so consideration for this power source is crucial. - GPS accuracy is the most critical feature of the device, so the design should facilitate this. Ideal Skills and Experience: - Proven experience in P...

I am looking for a freelancer who can provide me with the Arduino Bluetooth code specifically designed for the Wifi Lora V3. The code should be optimized for performance and reliability. Please include a brief description of the code's functionalities and potential use cases.

I'm looking for an expert in MATLAB to create a simulation for a 3-4 Degree of Freedom (DOF) robotic arm. Key Aspects: - The primary purpose of this project is educational, so the simulation should be designed with a focus on teaching and demonstrating robotic arm principles. - The simulation should be accurate in movement. Ideal Skills: - Extensive experience with MATLAB - Background in robotics - Teaching experience or understanding of educational software design Please note that the project may involve some back and forth to ensure the simulation meets educational standards, and your patience and ability to communicate complex concepts simply will be key to our success.

We have around 80 ESP32 based wireless devices in a center. These devices communicate with our local server which is assigned a static IP. We have a live TCP socket from each of the device to local server. This socket reattempts connection if device doesnt hear from server for 20sec. Everything runs smoothly for a period of time and then suddenly devices start disconnecting and reconnecting to this TCP socket. This goes on for around 1hr or so and then most of the time situation self resolves. If we restart the access point/router we see improvement in the situation but it does recur. During the period of 'reconnections' even HTTP requests from devices to server start to fail. Pings from server to device IP times out too. We can see in access point that the device is stil...

I'm looking for an experienced electronics engineer to design and code a circuit board that can control both analog RGBW LED strips and digital addressable LED strips (like WS2812) using an ESP32. Key Responsibilities: - Design a circuit board compatible with both types of LED strips - Code the ESP32 to control the LED strips - Ensure the circuit board can perform static color displays on the LED strips Ideal Skills: - Proficiency in circuit design and coding - Previous experience with ESP32 and LED strip control - Ability to create a robust and efficient circuit board Please note, there is no need for the circuit board to support any wireless control options or music synchronization. The primary focus is on controlling the LED strips to display static colors.

I'm looking for an Arduino expert who can create software to manage 5-8 valves. The software should also control an LCD display to show valve status information. Key Requirements: - Control of 5-8 valves - LCD display interface - Displaying valve status information Ideal Skills: - Proficiency in Arduino programming - Experience with valve control systems - Knowledge in interfacing with LCD displays - Understanding of real-time status monitoring and display

...an Arduino board for a robotics application. This project is centered around controlling servos. The main focus is on basic position control of these servos based on the data from a flight simulator (X-Plane12) for pitch and roll. Ideal skills and experience for the job include: - Receiving UDP datarefs from X-Plane - Processing the data to send instructions to a board (Arduino) - Proficiency in programming Arduino boards (Python or Arduino) - Experience with flat servos robotics and controlling them with the board - Understanding of basic position control mechanisms - Familiarity with the integration of sensors with Arduino boards I'm looking for a freelancer who can help me bring this project to life. If you have a passion for robotics and a ...

I'm seeking a skilled professional with expertise in IoT development, PCB design, and radio circuit design to assist in the prototyping stage of my project. The primary purpose of the IoT Arduino PCB is to carry out various tasks, including IoT, PCB, and radio circuits. Key Requirements: - Extensive experience in IoT development - Proficient in PCB design - Skilled in radio circuit design - Able to help move project from prototyping to final production - Capable of innovative thinking for diverse task applications Your role will be instrumental in advancing this project. Your skills can help transform this prototype into a successful final product.

I need an ...designed for speed control using PWM (Pulse Width Modulation). The whole project will be powered by a 12V-14V car battery. One motor have 10A max current and the other one have 60A max current. The whole project is controlled by an ESP32 micro controller. Also i would like to integrate a 12V to 5V stepdown converter to power the ESP32. Key requirements: - Add relay motor control for forward and reverse motion. - Incorporate speed control for one motor with PWM. - Integrate overcurrent protection into the PCB design. - Integrate 5V stepdown converter for ESP32 Ideal candidates should have: - Strong background in PCB design and motor control systems. - Proficient knowledge of relay-based motor controllers and PWM. - Experience with implementing protective...

I am seeking a professional skilled in Matlab Simulink with experience in designing and simulating robotic arms. The project involves creating a detailed simulation of a robotic arm, and potentially developing it for a specific application in industrial automation, educational purposes, or research and development. The project involves: - Designing a robotic arm in Matlab Simulink Plus Arduino - Simulating its functionalities such as gripping, lifting, and precision movements - Potentially applying it to industrial automation or educational purposes Ideal candidates will have: - Extensive knowledge of Matlab Simulink - Experience in designing and simulating robotic arms - Ability to create detailed simulations and potentially develop them for specific applications

I am seeking a professional skilled in Matlab Simulink with experience in designing and simulating robotic arms. The project involves creating a detailed simulation of a robotic arm, and potentially developing it for a specific application in industrial automation, educational purposes, or research and development. The project involves: - Designing a robotic arm in Matlab Simulink Plus Arduino - Simulating its functionalities such as gripping, lifting, and precision movements - Potentially applying it to industrial automation or educational purposes Ideal candidates will have: - Extensive knowledge of Matlab Simulink - Experience in designing and simulating robotic arms - Ability to create detailed simulations and potentially develop them for specific applications

I am seeking a professional skilled in Matlab Simulink with experience in designing and simulating robotic arms. The project involves creating a detailed simulation of a robotic arm, and potentially developing it for a specific application in industrial automation, educational purposes, or research and development. The project involves: - Designing a robotic arm in Matlab Simulink Plus Arduino - Simulating its functionalities such as gripping, lifting, and precision movements - Potentially applying it to industrial automation or educational purposes Ideal candidates will have: - Extensive knowledge of Matlab Simulink - Experience in designing and simulating robotic arms - Ability to create detailed simulations and potentially develop them for specific applications

Project Name: Design, Programing and simulation of a 3-4 DOF robotic arm using simulink and arduino Software: Matlab Simscape Hardwares (I Have): 1) arduino mega 2560 r3 2) servor mg90s 3) 1.5v - 6v r300c mini dc motor rpm3500 4) sg90 micro servor motor 9g(360°) 5) dual channel motor driver modul L298N H-bridge 6) jumper wire cable 7) breadboard 8) robotic arm kit 6dof Deadline 2 days $20 nzd

...professional to design, program and simulate a 3-4 Degree of Freedom (DOF) robotic arm using Simulink and Arduino. The primary application and specific tasks for the robotic arm have not been defined yet, and I am open to suggestions based on your expertise. This project will require you to demonstrate creativity and engineering skills in developing a versatile robotic arm. Key Tasks: - Design a 3-4 DOF robotic arm - Program the arm using Arduino - Simulate the arm using Simulink - Suggest and implement potential applications and tasks for the arm - Provide comprehensive documentation of the design and programming process The ideal freelancer for this project should have: - Extensive experience with Arduino and Simulink - A strong background in robotics and mechan...

...professional to design, program and simulate a 3-4 Degree of Freedom (DOF) robotic arm using Simulink and Arduino. The primary application and specific tasks for the robotic arm have not been defined yet, and I am open to suggestions based on your expertise. This project will require you to demonstrate creativity and engineering skills in developing a versatile robotic arm. Key Tasks: - Design a 3-4 DOF robotic arm - Program the arm using Arduino - Simulate the arm using Simulink - Suggest and implement potential applications and tasks for the arm - Provide comprehensive documentation of the design and programming process The ideal freelancer for this project should have: - Extensive experience with Arduino and Simulink - A strong background in robotics and mechan...

Hi there I did read your project description and it looks you are looking for an electronics engineer having experience in circuit, PCB layout designing, and microcontrollers coding/firmware development. My name is Engr. Saddam Gul, I am an electronics engineer having 5+ years of experience in circuits designing, PCB layout designing, and embedded system microcontrollers (Arduino, ESP32, FPGA, C2000, STM, and Rpi) coding/firmware development. I have successfully executed numerous complex projects, which you can view in my portfolio as samples. Please feel free to share more details about your project, and don't hesitate to contact me for any further discussions. Thank you Regards Engr. Saddam Gul

I'm working on an Arduino project that involves various hardware components and I need help with several aspects of it. - Main Goal: The project revolves around both hardware and coding. - Hardware: The project will use sensors, motors, and displays. - Specific Tasks: I need assistance with circuit design and wiring, writing and debugging code, and integrating the hardware components. Ideal skills and experience for this job would include: - Extensive knowledge and experience with Arduino - Proficiency in circuit design - Strong coding skills, especially in Arduino's programming language - Experience with various hardware components like sensors, motors, and displays - Excellent debugging skills - Able to integrate hardware components seamlessly

Help met get NMEA output by a NEO M9N GPS (Sparkfun) parsed by tinygps (serial) so that info looks smooth / nice in the serial output in Arduino. So I want to combine the SFE_UBLOX_GNSS with Tinygps how the simple sketch output/serial is now: $GNRMC,234015.00,A,4852.78123,N,0222.56312,E,0.027,,271224,,,D,V*14 $GNVTG,,T,,M,0.027,N,0.050,K,D*38 $GNGGA,234015.00,4852.78123,N,0222.56312,E,2,12,0.69,2.6,M,45.9,M,,0000*41 $GNGSA,A,3,10,02,17,21,08,32,,,,,,,1.20,0.69,0.99,1*02 $GNGSA,A,3,71,79,65,88,87,80,,,,,,,1.20,0.69,0.99,2*02 $GNGSA,A,3,27,34,30,04,36,06,09,,,,,,1.20,0.69,0.99,3*00 $GNGSA,A,3,28,34,11,16,06,21,,,,,,,1.20,0.69,0.99,4*07 $GPGSV,4,1,13,01,74,289,,02,79,295,37,03,37,229,20,08,33,170,21,1*65 $GPGSV,4,2,13,10,17,056,34,14,23,283,,17,23,312,18,21,77,103,37,1*65 $GPGSV,4,3...

Help met get NMEA output by a NEO M9N GPS (Sparkfun) parsed by tinygps (serial) so that info looks smooth / nice in the serial output in Arduino. So I want to combine the SFE_UBLOX_GNSS with Tinygps how the simple sketch output/serial is now: $GNRMC,234015.00,A,4852.78123,N,0222.56312,E,0.027,,271224,,,D,V*14 $GNVTG,,T,,M,0.027,N,0.050,K,D*38 $GNGGA,234015.00,4852.78123,N,0222.56312,E,2,12,0.69,2.6,M,45.9,M,,0000*41 $GNGSA,A,3,10,02,17,21,08,32,,,,,,,1.20,0.69,0.99,1*02 $GNGSA,A,3,71,79,65,88,87,80,,,,,,,1.20,0.69,0.99,2*02 $GNGSA,A,3,27,34,30,04,36,06,09,,,,,,1.20,0.69,0.99,3*00 $GNGSA,A,3,28,34,11,16,06,21,,,,,,,1.20,0.69,0.99,4*07 $GPGSV,4,1,13,01,74,289,,02,79,295,37,03,37,229,20,08,33,170,21,1*65 $GPGSV,4,2,13,10,17,056,34,14,23,283,,17,23,312,18,21,77,103,37,1*65 $GPGSV,4,3...

I'm looking for a skilled and experienced professional in raspberry pi or Arduino design and programming, with a strong background in home automation projects. Need to design with all components noted in image. Must provide links to purchase items to build working unit. Time Frame: 2 weeks Budget: as low as possible Ideal skills for this project: - Extensive knowledge and experience with raspberry pi or Arduino - Ability to design a user-friendly system - Proficiency in programming and troubleshooting - Creative problem-solving skills Program: Scan barcode and play audio based on barcode Audio can be paused, skip forward or back Led screen shows audio track #, battery life Requirements: ,schematic, PCB design, BOM ,components and website to find these co...

I'm looking for a seasoned professional with extensive experience in working with the ESP32 and cellular network connections. The goal is to set up a web server on the LILYGO T-SIM7000G ESP32 that can be accessed via a public static IP address. This project involves configuring the server to serve static files (HTML, CSS, JS) and handling real-time data updates. Key Responsibilities: - Configure the ESP32 to serve static web content and handle real-time updates. - Enable the ESP32 to process query/response data to a serial device. Skills and Experience Required: - Deep understanding of ESP32 and LILYGO T-SIM7000G. - Proficiency in Arduino IDE. - Previous experience in setting up web servers on ESP32. - Familiarity with AT commands and...

I'm seeking an expert with Arduino and robotics experience to create a voice-controlled, obstacle-avoiding vehicle. The vehicle must be capable of selecting an optimized path from a source to a destination using an open-source GPS API. Key Project Details: - The vehicle should start and stop based on voice commands. - In the event of an emergency, the vehicle should halt upon receiving a voice command. -vehicle speed should be controlled by voice command or web application -vehicle should maintain average speed when speed is not set through voice command or web application -vehicle speed must reduce when an obstacle is triggered or based on road conditions - The vehicle must follow a predetermined path under normal conditions. -it has to notify user when gps connection is ...

I need a project that sequentially writes numbers on a Common Anode seven-segment display using Proteus. The programming language or tool to be used has not been de...need a project that sequentially writes numbers on a Common Anode seven-segment display using Proteus. The programming language or tool to be used has not been decided yet, so you can recommend the best one based on your expertise. Key requirements: - Expertise in Proteus and seven-segment display implementation. - Ability to recommend a suitable programming language or tool (C/C++, Assembly, or Arduino IDE). - Experience in creating projects that display numbers sequentially. Your understanding of sequential numbering and Common Anode displays will be crucial for the success of this project. Looking forward to your ...

I'm looking for a skilled ESP32 C++ developer who can assist in configuring a monitoring device to track health metrics, specifically glucose levels. The device needs to be able to connect to some API/Webservices and display a value based on the return data Key Responsibilities: All configured via touchscreen Users will be able to select Wifi network via esp32 touchscreen - this gets them started They will then select which brand of glucose tracker they have The users will then insert there login credentials as required by the API And once logged in the monitor will display there current glucose levels as retrieved by the API , this will be a contious display on the screen showing nothing but a number - along side an indicator to show if the value is rising or dec...

I'm looking for a designer to create a 3D printable file for a custom ESP32 enclosure. The design should be based off an existing model () but will need some modifications. Specific requirements: - The enclosure should have a domed circular cover plate about 250mm in diameter.( I have some sample ideas that i can share) - It should include ventilation holes and mounting brackets. - The design should incorporate a custom logo on the front that will be a cutout. (Logo to be provided to the freelancer upon request) Ideal freelancer skills: - Proficiency in CAD software. - Experience with 3D printing design. - Ability to create custom logos in CAD. - Knowledge of materials and finishes suitable for 3D printing. (I have attached a sample of a similar

I need a PCB designed for the ESP32 S3 DevkitC-1. This is a prototyping project, so the design should be flexible and adaptable for different uses. i have provided the image ,design will have to be like that but with 44pins and screw terminals(22-left & 22p right) socket to plug esp32 s3 devkit c1,male jumper wires connector,and above mentioned screw terminal Key Requirements: - Design a custom-sized PCB, tailored to specific dimensions - Prototyping-focused design, allowing for adaptability - Knowledge in working with ESP32 S3 is a plus Ideal Skills: - PCB design - Experience with ESP32 S3 - Understanding of prototyping needs - Ability to work with custom size requirements

Project Description I need a professional hardware/electronics designer to create a complete ESP32-S3-based pcb. The design will feature: - ESP32-S3 module (placed on edge side of the PCB) with USB-C for programming. - 18 high-resolution analog inputs for NTC 10K/20K/100K sensors with shared COM pins. - 8 solid-state relay (SSR) outputs for controlling contactor signals, with shared COM pins. - One high-reliability 0-10V analog output. - Ethernet port with the W5500 IC and RJ45 connector at the bottom edge. - Integration of an external RTC module (DS3231) with battery backup for accurate timekeeping. - Power regulation, protection circuits, and optimized PCB design. - Milled slits for isolating I2C sensors.

I need a seasoned PCB designer to create a personal navigation device using an ESP32-S3. The low-power design will encompass various components such as a GPS, sensors buttons, and connectors. Key Features: - Incorporate ESP32 WROOM S3 and u-blox MAX-M10S GPS with chip antenna - Integrate a Speaker and 5 Pushbuttons - Include a Micro SD Card Slot and USB-C Connector - Have a Barometric Sensor, Accelerometer/Gyro, and Ambient Light Sensor - Implement a LoRA Radio and 4 connectors for battery & peripherals - Support LiPo charging and power management Board Dimensions: Approximately 44mm x 72mm Deliverables: - Altium Designer Schematic - Detailed Parts List (BOM) with supplier information - Altium Designer PCB Layout - Complete Fabrication data (Geber files etc) ...

I need an expert who can interface a USR-TCP232-T2 with an ESP32 in order to send sensor data to a website using GET and POST requests. just get and post requst demo will do the job any available api

I'm...Squareline Studio editor. The primary aim is to empower my engineers (who aren't software engineers) to design a GUI within Squareline, generate the code, and upload it to an ESP32 using the Arduino environment. Key project components: - The GUI should incorporate buttons and sliders as the main graphical elements. - The ESP32 should be capable of controlling devices, monitoring data, and triggering events through the touchscreen. - Utilization of the LittlevGL (LVGL) library in conjunction with Squareline Studio is necessary. Ideal candidates for this project should have: - Extensive experience with touchscreen integration and ESP32 microcontrollers. - Proficiency in Squareline Studio and the LVGL library. - Ability to simplify complex program...

I need an expert in ESPHome and ESP32 boards to assist with creating YAML code for controlling a servo via ESPNow. Key Requirements: - The main purpose is to automatically control a servo from 0% to 100% then return to 0% after 1s using an ESP32. This will happen when a photoelectric retroreflector switch is triggered on a different ESP32 board. ( When switch is triggered on one ESP32 board 1. The servo on ESP32 board 2 should instantly changes to 100% position and returns to 0% after 1s) - The communication between ESP32 devices should use the ESPNow protocol. - The yaml code should be suitable for ESPHome. - The ideal freelancer will have extensive experience with ESPHome, ESP32 boards, and ESPNow. I’m an electrical engineer w...

lets' fix my broken code...

Per our PMs, correct the existing code to enable the NEO 8M gps module to deliver data to serial monitor