Sensors and actuators ppt仕事
...a system for me. This system should collect data like temperature, humidity, location, and images from designated IoT devices. Key Requirements: - Utilization of Temperature/Humidity, GPS, and Camera Sensors: The IoT solution should be capable of collecting data from these sensors. - Data Transmission: The collected image data needs to be sent to an Azure platform once per day. Temperature/Humidity and Telemetry data to be transmitted every two hours (upon wake up of the device) - Visualization on Computers: The entire system should be optimized for viewing per client. Ideal skills for this project include experience with IoT solutions, Azure platforms, and a strong understanding of the various sensors required for the data collection...
Objective: Develop a refined and realistic graphic representation of an automated orchestration and collection system that tracks, loses, predicts, and regains custody of a naval vessel. The diagram should visually depict the process of automatic detection, loss of tracking, tasking for collection, and successful recapture based on predictive modeling. A rough Mockup is provided. Key Elements to Include: 1. Object Tracking: • Show a naval vessel with an initial position and subsequent tracking points. • Use a dotted line to indicate the vessel's path until the point where it "goes dark" and custody is lost. 2. Sensor Network Tasking: • Integrate icons or symbols representing different types of sensors such as...
We are refining our Falcon race timing syst...our Falcon race timing system for accuracy in the desert, specifically to tracking falcons over a 400-meter course. This system must detect objects (falcon) around 10cm x 10cm, in the outdoor desert environment Key Specifications: - LiDAR Sensors: - Range: Up to 20m. - Aperture: 180 degrees. - Frequency: 100Hz. - Resolution: 0.32 degrees. - Power: 3W. - Connectivity: Visual display timer and device connectivity for real-time tracking, supported by a battery life of at least 4 hours. -Signal Synchronization: Transmitter at the endpoint and receiver at the start for accurate timing. Operational Environment: The design must withstand the desert’s outdoor conditions, howeverwe dont run the race when there ...
We are looking for an experienced content developer to create eng...high-quality training materials for various training programs that we run. The ideal freelancer will have experience with: - Developing both written and video content - Creating dynamic PowerPoints, Word documents, and PDF files - Designing long form training programs using simple & dynamic .ppt Your responsibility will be to create content that engages learners and supports their educational needs. This role requires an individual with exceptional attention to detail, creative flair, and a solid understanding of effective training methodologies and tools. Proven experience in this field is crucial, and I will use your portfolio to ascertain your design and deve...
...visual appeal and overall design of my PowerPoint presentation. This presentation will be used for a marketing campaign specifically targeting investors. A sleek, professional and engaging design is key to delivering the right message to this audience. Key responsibilities of this project would include: - Reviewing and refining current slides to ensure they're attuned to a professional and sleek style. - Creating new templates and visual assets that are engaging and visually appealing. - Making sure the design is consistent across all slides, ensuring a cohesive and polished look. The ideal candidate for this project should: - Have a strong portfolio of previous work, specifically in professional PowerPoint design. - Be able to un...
I require a freelancer proficient in Microsoft PowerPoint and Word to create a digital document. Key Requirements: * Creation of a coherent document, integrating both textual content and images. * Application of personalized design elements like custom colors, fonts, and branding materials. The ideal freelancer for this project has a keen sense of design, with experience in document formatting—deploying custom colors, fonts, and logos. Mastery in manipulating both PowerPoint and Word to create engaging and visually compelling resources is vital. Your portfolio showcasing similar projects will increase your chances.
I'm looking for a technical wizard who can create a tennis ball tracking system specifically designed for indoor use. The system will utilize cameras, sensors, radars etc. to accurately track the trajectory of tennis balls. **Necessary Skills and Experience** - Expertise in camera-based and/or sensor-based tracking algorithms - Solid understanding of physics related to ball trajectory, particularly in tennis games - Experience in designing tracking systems for indoor spaces - Ability to work efficiently and deliver high precision results Please note: Only those with a strong background in the relevant field should apply for this project. It will involve complex technical tasks, so hands-on experience is indispensable. Let's create a top-notc...
I'm looking for an experienced firmware developper to build an STM32 for a board based on STM32G0 MCU, The firmware shall manage interruption between button and sensors, enter into bootloader mode on an interruption on the serial port (RS232), the firmware shall manage a state machine based on sensors input and go to sleep mode when no interruption occurs. More details will be shared later
...for the prediction of sensor values and subsequently, anomaly detection. Key details: - Purpose: We are building a model meant to predict values from 20 discrete sensors. Based on the familiarity of these sensor values, the target is to then calculate the degree of anomaly from the expected prediction. - Data: We'll be working with a medium-sized dataset (1,000 to 10,000 data points). The data is specifically discrete sensor data, not time-series or mixed. Desired skills: - Familiarity and understanding of GCNs. - Strong experience in anomaly detection models. - Proficient in dealing with discrete sensor data. - Comfortable handling medium-sized datasets. This project is a wonderful opportunity for anyone specializing in the field of data science an...
I require a PPT expert skilled in creating enticing and colourful presentations that educate an audience. My project involves the development of an educational curriculum presentation. The perfect candidate for this undertaking would have: - Distinctive PowerPoint skills in creating colourful and interactive content - An innovative approach to information presentation to facilitate learning effectively - An excellent understanding of how to structure educational material into a clear, comprehensive, and engaging presentation. - Experience in designing curriculum-based content I am looking forward to a professional who can transform my educational curriculum into a bright, fun, and instructive PowerPoint presentation.
I require a detailed and thorough market research analysis covering consumer preferences, market trends and a comprehensive evaluation of competition. The research will focus specifically on the automotive, solar, EV and battery storage - packs sector. I'm interested in: - Understanding consumer purchasing behavior: What are the current buying trends? What factors influence consumer decisions? - Competitor analysis: Who are the key players in the market? What are their strengths? How can we outperform them? - Market size and growth potential: What is the current market size? What is the potential for growth? My Company details - We are into laser source manufacturing, this source is applicable in different application in different industries. Applicati...
...convey just how well this toothbrush cleans and care for teeth. Show the bristles in action, removing debris and leaving nothing but sparkling clean teeth. - Ease of use: Attention should be drawn to the user-friendly design of our electric toothbrush. Highlight simple operation features, and ergonomic design that make it comfortable to use. - Advanced technology: Our electric toothbrush isn't just a toothbrush, it's a piece of advanced technology. Show off the high-tech components that make it exceptional, like its powerful motor and intelligent sensors. Our primary audience for this video will be dentists and dental hygienists, so it's important that the video looks professional, and the advantages of the product are p...
I require a freelancer experienced in course creation and content aggregation. I have less than ten PDFs that must be transformed into an engaging, intermediate-level learning course. - The Skills Required: 1. Strong grasp of course development tools, methodologies, and practices. 2. Excellent understanding of PDF, PPT 3. Ability to add company branding to the material. You will need to copy and paste and format the material into a PDF and 5 PPT based on chapter. - The Project Scope: 1. Convert the provided PDFs into a consolidated PDF with just the required information from the specific pages of information provided. 2. Create a series of 5 PPTs to represent each chapter of the course. Your expertise in the field will help in creating...
I'm looking to create a GraphQL API or Zapier automation to connect my digital signage software with motion sensors. Unfortunately, I can't provide specific details with respect to the digital signage software we are currently using. Essential Requirements: - Expertise in creating APIs using GraphQL or automation with Zapier. - Experience integrating digital signage software with motion sensors. - A comprehensive and detailed project proposal that outlines how you would approach and execute this task. Your application should focus heavily on the solution you propose as well as the exact steps necessary for successful implementation. Please don't hesitate to include any past projects that may be similar or relevant for this role.
...STM32L071 micro-controller, and other parts preferably from our stock list. Design shall be made in Ki-Cad. No programming required. We have allready selected a structural sound sensor. Key Requirements: - Design expertise: Proficiency in PCB layout, design, and testing, with an emphasis on sensors. - Simplicity and autonomy: The design needs to stand alone without the need for integration into existing monitoring systems or mobile device alerts. - Experience in Industrial Applications: Familiarity with industrial machinery and electronics. Ideal Skills and Experience: - Professional experience in PCB design and manufacturing, preferably with a portfolio demonstrating similar projects. - Understanding of sound measurement and p...
I am seeking an experienced freelancer who can create a standard format PowerPoint presentation of 40 slides based on a given topic. The presentation should include: - Basic graphic design elements, keeping it simple yet engaging. - It does not need to adhere to any specific color scheme or co...format PowerPoint presentation of 40 slides based on a given topic. The presentation should include: - Basic graphic design elements, keeping it simple yet engaging. - It does not need to adhere to any specific color scheme or corporate branding. Ideal skills for this job include thorough knowledge of PowerPoint, a good grasp of simple but effective graphic design, and the ability to present complex ideas in a straightforward and engaging way. Please provide examples of previous wo...
We are looking for an experienced content developer to create en...high-quality training materials for various training programs that we run. The ideal freelancer will have experience with: - Developing both written and video content - Creating dynamic PowerPoints, Word documents, and PDF files - Designing long form training programs using simple & dynamic .ppt Your responsibility will be to create content that engages learners and supports their educational needs. This role requires an individual with exceptional attention to detail, creative flair, and a solid understanding of effective training methodologies and tools. Proven experience in this field is crucial, and I will use your portfolio to ascertain your design and deve...
I'm in need of a professional freelancer who can create a compelling presentation that focuses on generating leads for my automotive control cables company. The presentation should primarily: - Showcase the innovative aspect of our prod...on generating leads for my automotive control cables company. The presentation should primarily: - Showcase the innovative aspect of our products - Aim to appeal to potential business partners. Ideal skills would include strong PowerPoint proficiency, experience in B2B sales presentations, and knowledge in the automotive industry. Familiarity with automotive control cables would be a plus. Through this presentation, we aim to draw audience attention to our innovative product offerings and, in turn, generate potential busin...
...exoskeletons or similar equipment - Understanding of the needs and limitations of individuals with disabilities - Proficiency in creating realistic 3D animations This project will involve designing the structure of the exoskeleton itself, as well as creating a highly realistic 3D animation that showcases its functionality and use. The animation should provide viewers with a clear understanding of how the exoskeleton can improve mobility for its users. The 3D animation will include a part in which the exoskeleton parts will become partially transparent revealing internal mechanical components (rotary and linear actuators, sensors, electronic boards) Then a scene will be made to show how the exoskeleton will fit the patient, and how it will be u...
For this task, I am seeking an expert with a deep understanding of programming a PIC16F877A microchip. The primary responsibility for this role is to support data acquisition from infrared signal decoder sensors. Specifically: - Experience programming PIC16F877A microchip is a must. - Knowledge in infrared signal decoder sensors for data acquisition integration. - Manage the sensor data interpretation logic. - The main output I'm looking for is accurate and smooth reading and decoding of data from the sensors. Your skill in the task will provide a foundation for accurate data readings and optimal functionality. Specialty in sensor technology is a high preference. Be ready to showcase your similar previous projects. Let's make this a ...
...to integrate two ultrasonic sensors onto a Nexys A7 FPGA board using VHDL. My primary goal is using these sensors for object tracking and distance measurement. Integrate TWO HCSR-04 ultrasonic sensors to an Nexys A7 fpga board so that I can read data from both sensors. I need for the seven-segment display that is on the board to show the distances measured. Using a pushbutton on the board, have the display change to show readings from sensor 1 and when pushed the display shows readings from sensor 2 and vice versa. So basically, the pushbutton toggles which sensor's measurement is displayed on the seven segment display. Also, another push button will be used to toggle back and forth between displaying the distance in centimet...
...to integrate two ultrasonic sensors onto a Nexys A7 FPGA board using VHDL. My primary goal is using these sensors for object tracking and distance measurement. Integrate TWO HCSR-04 ultrasonic sensors to an Nexys A7 fpga board so that I can read data from both sensors. I need for the seven-segment display that is on the board to show the distances measured. Using a pushbutton on the board, have the display change to show readings from sensor 1 and when pushed the display shows readings from sensor 2 and vice versa. So basically, the pushbutton toggles which sensor's measurement is displayed on the seven segment display. Also, another push button will be used to toggle back and forth between displaying the distance in centimet...
I'm looking to develop an electrical drawing using Arduino for sensor-based automation, specifically utilizing motion sensors. it will be applied to a bicycle to indicate which direction it is turning and if it is stopping or moving. I will need expertise in the following areas: - Proficiency in Arduino - Experience with electrical drawings - Knowledge in sensor-based automation - Specific experience with motion sensors The project's overall goal is to attain a functional automation system based on motion sensing. Please share any similar projects you've completed.
I'm seeking a skilled programmer with in-depth knowledge of the ESP32 development board. My existing code needs some changes: - Notable one being the integration of a new feature: a temperature sensor and Expiry date. Key responsibilities include: - Becoming familiar with my original code - Properly integrating the temperature sensor into the code Ideal candidates will have: - Strong experience in coding for ESP32 - Familiarity with temperature sensors - Ability to ensure seamless sensor integration
I am in need of an experienced pitch deck writer who also has great experience in MS Power Point I Have attached my existing Pitch deck PPT which has to be modified to look amazing and professional Please only apply if you have previous experience in this field and can showcase successful results. A strong understanding of financial projections will be a plus. I expect the final work to be delivered in a timely manner.
More details: What is the main objective of the E-Learning storyboard? Engage learners with interactive content What level of interactivity do you require for the content? Advanced (simulations, games) Who is the primary audience for this E-Learning module? Adults. I'm looking for an engaging e-learning storyboard of advanced level which should include interactiv...storyboard? Engage learners with interactive content What level of interactivity do you require for the content? Advanced (simulations, games) Who is the primary audience for this E-Learning module? Adults. I'm looking for an engaging e-learning storyboard of advanced level which should include interactivity. The project should be based on andragogy principles.i will need someone who can deliver this in PPT i...
...PowerPoint to overhaul my existing presentation. There are 22 pages of PPT. The project must be completed no later than Tuesday, April 9, 2024. Here's what I need: - Design Improvements: I'm after a style that is more creative/innovative to engage my audience better. If you have a knack for fresh, out-of-the-box design approaches, you're a great fit for this aspect of the job. - Formatting Fixes: I'm having trouble with the use of images and graphics. Can't seem to make them look cohesive and integrated well on the slides. If you have a strong skill set in visual editing and incorporating images seamlessly into slide designs, you'd be perfect for this. An ideal bidder should have a robust portfolio of PowerPoint designs and...
...visually compelling designs and layouts that align with a modern and minimalist aesthetic is required. - The ability to visually communicate unique selling points for potential clients is crucial for this project. - to convey complex design concepts in an accessible and appealing manner. Your role will involve translating the unique features of the planned hotel's modern and minimalist design into an appealing, memorable marketing presentation. as well add details on the Area , Hospitality opportunities and potential as well add design of the hotel and look and feel as well " sell " the opportunity in this area and larnaca and why invest and build hotel in this area Summary : 10-12 slides PPT...
...low, and we will be using traffic sensors as the IoT devices for this project. These are two main modules which should be done accordingly: 1) Break Free Path: Smart speed breakers are the traffic claiming devices where over speeding vehicles will activate the speed breaker and it will raise the speed breaker above the surface of the road and will give the physical remainder to the driver for slowing down the vehicle. If the speed of the vehicle will be in the given allowed speed limit, then the speed bumps will remain flat on the surface of the road and the vehicle can pass through it comfortably. 2) Congestion Detection: With cameras and sensors constantly monitoring intersections, technicians can monitor the entire city from the city&...
I have a nice working code about capacitive touch sensors inside esp32 and everything is working fine but i have a little bug on one input If you have experience with midi ble and esp32 then you have the right skills.
Hi Bipin, This is the project for the most recent PPT slides I sent you to design/format.
...an experienced electrical engineer to design an electrical motor and circuit board for use with oil tools and downhole equipment. Key Requirements: - The electrical motor should have a power output between 1 and 5 horsepower - The circuit board should be designed to incorporate speed control, overload protection, and temperature sensing - The system will be exposed to harsh environmental conditions Ideal Skills: - Proven experience in electrical motor design, particularly for industrial applications - Expertise in circuit board design, with a focus on components like speed control, overload protection, and temperature sensors - Understanding of environmental factors that might influence the design, like high temperatures and vibration ...
We require microcontroller programming services to execute sensor interfacing and manage communication protocols. Our project needs an expert who can: - Interface our 32 bit PIC microcontroller with temperature sensors, analog circuits like Op-Amp and ADC - Implement SPI communication protocol within the microcontroller Experience with PIC microcontrollers is a must, along with a sound understanding of sensors, analog-to-digital conversion (ADC), and SPI protocol. Proven experience in similar tasks will make you an ideal candidate for us.
...capability to track pressure applied during practice. Design specifics: - Material: Remo RT-0010-00 with non-slip rubber bottom - Size: 10-inch - Force Pressure Sensor: Full pad coverage - additional specs include: ultra sensitive measurement, numeric and graphic live data. can discuss Ideal expertise and skills: - Professional experience in product design specifically with musical instruments or related equipment - Knowledge about material properties and how they affect sound production - Experience in incorporating sensors in physical products - Problem-solving skills for optimizing sensor placement for full utilization I am open to recommendations regarding the placement of the force pressure sensor. Your insights will be greatly helpful i...
I am looking for an expert in Adobe indesign who can help me change PPT in Adobe indesgin and update an exsiting PDF brochure with update design
Brochure Design - 8-12 pages. Landscape design of a brochure with context and text from the PPT file given.
...LOOKING FOR PEOPLE LOCATED IN TORONTO/SCARBOROUGH In my Raspberry Pi project, I'm suddenly having problems with some previously functioning components, including the LEDs, buzzer, and magnetic door lock. They've mysteriously stopped operating, without any recent changes to the wiring or connections. All of them are not turning on when tried. The sensors on the other hand are working fine (temperature, motion sensor, pi camera) I'm looking for an expert in Raspberry Pi with a keen understanding of its intricacies, specifically someone with experience dealing with its diverse components such as LEDs, buzzer, and magnetic door locks. The only thing I can think of that might’ve changed is that we got this project shipped from my home country. It ...
add check box and validation for input box on android app read ppt and chat to me if you understand what i want.
I need a PowerPoint template based on our company's logo and color theme. This template will primarily be used for a sales pitch. Please note that I'm only looking for the template itself - title, subtitle, and content slides.
...expert in safety PLC programming and robotics, specifically experienced with Yaskawa robots and SICK laser sensors to guide the integration of our system's safety features. Key Tasks: - Program our safety PLC to work seamlessly with our Yaskawa robot. - Implement code that will enable the robot to respond to safety triggers. Safety Triggers: The Yaskawa robot must be programmed to respond to the following safety triggers: - Engagement with physical barriers - Receipt of emergency stop commands Skills and Experience: Ideal candidates should have: - Proficient knowledge in safety PLC, SICK laser sensors and Yaskawa robot programming. - Proven experience in combining PLCs and robotic system for automation processes. - An understandin...
I'm looking for a skilled Android developer and termux expert who can build an simple automation script for running basic commands. Key Requirements: - The application will be developed using both Termux. This needs someone with in-depth understanding of Android's file system and security model. - The app should possess functionalities that include accessing system files, modifying system settings, and executing privileged commands. - There are no requirements for interacting with any external hardware devices or sensors. Ideal Skills: - Strong experience in Android development - Deep knowledge of Termux and root access - Understanding of Android system files, running commands and automation. Only need the script for running on ter...
...capture 8 ECG signals at 500 sps, and the STM32F407. The system requires the following key components: - Real-time data acquisition: The system should be able to acquire real-time ECG data from the ADS 1298 - Data filtering and signal processing: The acquired data needs to be processed and filtered to ensure accurate ECG signal readings - Configurable gain settings: The gain settings for the ADS 1298 should be adjustable in the range of 1-10 Additionally, the clock to the ADS 1298 must be provided by the STM32F407. The system is expected to cater to real-time monitoring needs. Ideal Skills: - Proficiency in interfacing microcontrollers with sensors - Extensive experience in signal processing and data filtering - Strong knowledge in ECG signal acq...
...can assist with mapping and localization for an indoor 2D navigation project. I need someone who is in karnataka, India, for this project. Key Tasks: - Mapping: Creating a detailed digital map of the indoor environment where the robot will navigate - Localization: Implementing a robust localization system to help the robot determine its position within the mapped environment Environment: - The robot will be operating strictly within indoor environments, so the developer should have experience working with this specific environment. Sensors: - The robot will be equipped with both a LIDAR and a Camera for navigation purposes, therefore the ideal candidate should be knowledgeable in integrating these sensors into the ROS system. Key Skills: - Proficient in R...
...Mechatronics Trainer in Bangalore who is proficient in a range of skills including electrical engineering and automation systems. Extensive knowledge of PLC, SKADA, Pneumatics, Sensors and Transducers is essential to facilitate successful training sessions. Key Responsibilities: - Deliver high-quality training sessions with emphasis on Electrical circuits, Automated systems, Sensors and Transducers, PLC, SKADA, and Pneumatics. - Implement and guide practical exercises to enhance trainee understanding. Ideal Candidate: - Should have an advanced level of expertise in Mechatronics. - A background in electrical engineering and automation systems. - Exceptional command of PLC, SKADA, Pneumatics, Sensors and Transducers. Pl...
Looking for someone to convert my PDF / Ai file into a PowerPoint Template. Not just a conversion of pdf to ppt which I can do very easily, but the actual template itself. Page Numbers Ability to edit text Ability to change the colours of the vector files. Slide master Set up colours Set up charts Layouts Language File Size Ideal Skills: - Proficient in PowerPoint - Ability to work under tight deadlines - A keen eye for detail, symmetry, and aesthetics Please apply if you can deliver this project ASAP. Speed is key, but must be balanced with quality. Chosen provider will sign a Non Disclosure Agreement
I'm in need of a highly expert system developer for a SCADA Platform. The emphasis is on real-time monitoring and alarm management. The SCADA system should be proficient with sensor connectivity, though the protocol requirement is flexible. Ideal Skills and Experience: - Deep understanding of SCADA systems. - Experience with real-time monitoring and alarm management. - Ability to integrate SCADA with various sensors. - Protocol knowledge in Modbus, Ethernet/IP, and OPC-UA is a plus, though not mandatory. Your key responsibility will be to ensure the system works seamlessly and efficiently, so strong attention to detail is a must.
...is for a comprehensive analysis and demonstration of complex robotics systems in different environmental scenarios. Key responsibilities entail: - Setting up a physics-based simulation using the Omniverse Isaac Sim framework that is focused on robotics. - Ensuring that the simulation can generate realistic, high-quality visual and realistic outputs while maintaining optimal performance. The ideal technical skills and experience for this job require: - In-depth knowledge and practical experience in Omniverse Isaac Sim. - Profound understanding of physics-based simulations, specifically in the field of robotics. - Demonstrated ability to create detailed, real-time simulations embodying advanced technological principles. Responsibilities: • Develop ...
