Freelancer ロゴ
ログイン 登録
プロジェクトを投稿する
探す
Electrical Engineering
Mechatronics
PLC & SCADA
Solidworks
Structural Engineering
プロフィールカバー写真
あなたはをフォローしました
ユーザーのフォローエラー。
このユーザーはフォローを許可していません。
このユーザーをすでにフォローしています。
あなたのメンバーシッププランは、0 個のフォローのみ許可します。アップグレードは、 こちら。
のフォローを解除しました
ユーザーのフォロー解除エラー。
あなたはを推薦しました
ユーザーの推薦エラー。
何か問題が発生しました。ページを更新してもう一度お試しください。
メールの認証に成功しました。
ユーザーアバター

Daniel M.

@danielmartinezc7

monthly-level-three.svg
0.0
0
0.0
0.0
0%

Industrial Automation Expert|Electrical Designer

$17 USD / 時間
・
のフラグ
Mexico (10:00 午後)
・
登録日: 9月 11, 2021
$17 USD / 時間
・
Professional with eight years of experience in the field of industrial automation, specializing in the development, implementation, and optimization of electrical engineering and PLC & HMI control systems. Skilled in design and committed to delivering engineering projects and quality work efficiently. Skills: ∎Electrical Designer Proficient in load panel design, detailed electrical diagrams, reading Piping and Instrumentation Diagrams (P&IDs), multi-line and single-line diagrams and control cabinets. Extensive knowledge in Eplan P8 versions 5.70, 2.0, 2.2, 2.7, and Pro Panel 2023, as well as AutoCAD Electrical. ∎Software Step7, LOGO! Soft Comfort, TIA Portal v17, Movitools Motion Studio, TIA Selection Tool, Integrated Architecture Builder, Studio 5000, Festo Automation Suite, Rittal Therm. ∎HMI, SCADA Visualization Development Siemens TIA Portal, Factory Talk View ME and SE. ∎VFD SEW Series Movifit, Movimot, Movidrive – Siemens Sinamics G120, WEG CFW10 Series, NIDEC Unidrive M300, Allen Bradley PowerFlex 753, 755 AC Drives, Armorstart Series. ∎Linear Actuators Bosch Indradrive HCS02, HCS01 – Festo JXCP17 Series. ∎Vision Systems Keyence IV2 Series – Leuze LSIS 400. ∎Temperature Controllers Honeywell UDC 2500, 3200, 3500 - JUMO STB/STW - Walther WTRB-24DC-3500 ∎Communication Protocols Siemens Profibus DP, Profibus PA, Profinet – Allen Bradley Ethernet IP, Ethernet, TCP IP. ∎Tools Office Suite (Excel, PowerPoint, Word) – Canva – Figma – Photoshop. Why choose me? I have solid experience in the development, implementation, and optimization of automation projects, from conceptual engineering development to on-site commissioning and final testing. I have worked for internationally renowned companies, always seeking quality and efficiency, with a high commitment to detail in each project. I adapt to the needs, budget, and standards of each client.
確認
Freelancer Solidworks Designers Mexico
全て見る Solidworks Designers 、 Mexico

ポートフォリオ

ポートフォリオ

12332997
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
12332927
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
12310989
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
12332997
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
The project was developed for a truck painting line at the Daimler plant in Toluca, Mexico. The electrical design was developed in Eplan P8 2.2 following NFPA 79 standards. This part presents the pre-treatment phase, which involved immersing the body in a tank of water with a mixture of water and other chemicals to provide special treatment and prevent early corrosion. In each stage of the line, variables such as level, acidity, temperature, flow, pressure, among others, were controlled. For control, a GuardLogix 1756-L73S safety PLC from Allen Bradley and an Allen Bradley VERSAVIEW 1500P IPC were used, with Ethernet IP network for communication. This project was very extensive and highlighted the use of frequency inverters and soft starters, as well as the instrumentation used for measuring different variables.
Truck Painting Line
12332927
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
The project consists of 11 stations for assembling the brake of a truck model for the Continental plant in San Luis Potosí, Mexico. The electrical design was developed in Eplan P8 2.9. Each station was designed for semi-automatic use, so all had to meet the necessary safety requirements for the protection of production personnel. A PILZ PNOZmulti 2 safety PLC was used, and for control, a Siemens S7 1500 PLC was programmed in TIA Portal V17. Handling was done via a Siemens IPC 477E, and Profinet was used for communication.
Brake assembly line
12310989
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
The project involved the semi-automatic control of a cleaning cabin for filters, which are mounting devices for a painting line. These filters are exposed to grease and paint and are reusable. The control is managed through two push-button panels; these operate electropneumatic valves to open the cleaning liquid taps. The cabin contains two tanks, one for ethanol and one for water, which are replaced when emptied. For control, VEGA level sensors were chosen. It features a tower indicating the status of the cabin (OK, NOK, empty tanks, and emergency stop). The control was developed in a Siemens Logo PLC using gate programming with Siemens LOGO!Soft Comfort software, and the diagrams were created in Eplan P8 v2.2. An interesting aspect of this project is that since the cabin handles liquids with a high degree of explosiveness, all electrical mounting elements were explosion-proof, in addition to having exchange signals with the fire protection system of the facility.
Filter Cleaning Cabin in Paint Shop
変更を保存しました
0.0 · 0 Reviews
レビュー
レビューがありません！
経験
Electrical Designer
6月, 2022 - 現在
•
2 , 6
Actemium INP México
6月, 2022 - 現在
•
2 , 6
Prepared engineering project quotations and developed/upgraded electrical and pneumatic engineering. Managed electrical and pneumatic installations, and supervised control panel assembly. Strategically selected control devices based on client and project requirements.
のフラグ
Querétaro, Mexico
6月, 2022 - 現在
•
2 , 6
Project engineer
8月, 2016 - 3月, 2022
•
5 , 7
CADI Ingeniería
8月, 2016 - 3月, 2022
•
5 , 7
Managed client relationships, participated in project meetings, and developed technical data collection in the field. Created detailed quotations, managed materials, and planned project schedules. Developed electrical engineering solutions, HMI visualizations, and PLC programs. Coordinated project commissioning, supervised control panel assembly, and prepared documentation. Provided training and technical support, ensuring effective system operation and maintenance.
のフラグ
Puebla, Mexico
8月, 2016 - 3月, 2022
•
5 , 7
学歴
Mechatronic Engineering
2012 - 2016
•
4
のフラグ
Mexico
2012 - 2016
•
4
招待状の送信に成功しました！
ありがとうございます！無料クレジットを受け取るリンクをメールしました。
メールを送信中に問題が発生しました。もう一度お試しください。
Freelancer ロゴ Japan / 日本語
ヘルプ＆サポート
 フリーランサー
カテゴリー プロジェクト コンテスト フリーランサー エンタープライズ AI開発 メンバーシップ 優先フリーランサープログラム プロジェクト管理 ローカルジョブ Photo Anywhere ショーケース 開発者用API 認証を受ける デスクトップアプリ
 関連情報
当社について ご利用方法 セキュリティ 投資家 サイトマップ ストーリー ニュース チーム アワード プレスリリース Careers
 利用規約
プライバシーポリシー 利用規約 コピーライトポリシー 行動規範 手数料とその他費用
 パートナー
Escrow.com Loadshift Warrior Forum
 アプリ
Apple App Store のロゴGoogle Play ロゴ
クリップボードへのコピーが失敗しました、権限を調整してからもう一度お試しください。
クリップボードにコピーされました。
登録ユーザー 投稿された仕事の合計
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2025 Freelancer Technology Pty Limited (ACN 142 189 759)
プレビューを読み込み中
位置情報へのアクセスが許可されました。
あなたのログインセッションの有効期限がきれ、ログアウトされました。もう一度ログインしてください。