Freelancer logo
Log In Sign Up
Post a Project
EXPLORE
AutoCAD
Building Architecture
CAD/CAM
Civil Engineering
Structural Engineering
Profile cover photo
You're now following
Error following user.
This user does not allow users to follow them.
You are already following this user.
Your membership plan only allows 0 follows. Upgrade here.
Successfully unfollowed
Error unfollowing user.
You have successfully recommended
Error recommending user.
Something went wrong. Please refresh the page and try again.
Email successfully verified.
User Avatar

Bui Q.

@tuongeng4

monthly-level-three.svgverified-v2.svg
4.9
110
7.0
7.0
96%

EXPERTS STRUCTURAL /TEKLA FABRICATION DRAWING✅

$25 USD / Hour
・
Flag of
Vietnam (12:48 AM)
・
Joined on August 30, 2017
$25 USD / Hour
・
Hi There ! I'm Senior Structurall Engineer . ⭐⭐⭐⭐⭐ I have worked as a Structural steel and detailed, residential structural ,multistory buildings. Now i am here on this platform to offer you my services. My priority is transparency and high quality and safety of my works and also providing economical and aesthetic solutions for your structures. Design base on Code US , EN1999, IBC, BS, AS1170, AS , CALIFORNIA standard. Used as well with all Software : ROBOT STRUCTURAL ANALYSIS. STAAD V8I ETAB SOFTWARE SAP, PROKON ,RISA 3D... TEKLA, REVIT , INVENTOR ANSYS 18 CFD ,CFX, FEA ANALYSIS When you choose me for your structural needs, I guarantee quality and accuracy. Your satisfaction is my priority, and I will go above and beyond to ensure exceptional results. Thank you for considering my services, and I look forward to working with you on your upcoming projects.
Verifications
On time
97%
On budget
98%
Accept rate
72%
Repeat hire rate
15%
Freelancer Structural Engineers Vietnam
See all Structural Engineers in Vietnam

Portfolio

Portfolio

3695135
Project Description Hello, I have a small project I needed some help with. I am building a steel hangar using limited materials due to the locally available materials. The structure will be used as a workshop and will sustain vibration from the equipment. The locally available materials are very limited here in Somalia. I need the structural design and detailing for the below described building. All calculations must be submitted. Relevant Information for design: 1) 28m x 28m Building (See image below) 2) Drawing Plan Attached 3) Locally Available Materials: a) W200x59 and W200x39 (CSA) for beams and columns 6 meter lengths. If you need more details please let me know. b) I was planning to use light weight HSS 4x8 as the purlins for roof and girts for siding. c) Alternatively, pour concrete columns to support the roof if the I-beam section is not sufficient. Let me know how much engineering and detailing would cost. I build workshop hangars frequently in remote locations for
portal frame, wahouse, factory desig
Project Description Hello, I have a small project I needed some help with. I am building a steel hangar using limited materials due to the locally available materials. The structure will be used as a workshop and will sustain vibration from the equipment. The locally available materials are very limited here in Somalia. I need the structural design and detailing for the below described building. All calculations must be submitted. Relevant Information for design: 1) 28m x 28m Building (See image below) 2) Drawing Plan Attached 3) Locally Available Materials: a) W200x59 and W200x39 (CSA) for beams and columns 6 meter lengths. If you need more details please let me know. b) I was planning to use light weight HSS 4x8 as the purlins for roof and girts for siding. c) Alternatively, pour concrete columns to support the roof if the I-beam section is not sufficient. Let me know how much engineering and detailing would cost. I build workshop hangars frequently in remote locations for
portal frame, wahouse, factory desig
Project Description Hello, I have a small project I needed some help with. I am building a steel hangar using limited materials due to the locally available materials. The structure will be used as a workshop and will sustain vibration from the equipment. The locally available materials are very limited here in Somalia. I need the structural design and detailing for the below described building. All calculations must be submitted. Relevant Information for design: 1) 28m x 28m Building (See image below) 2) Drawing Plan Attached 3) Locally Available Materials: a) W200x59 and W200x39 (CSA) for beams and columns 6 meter lengths. If you need more details please let me know. b) I was planning to use light weight HSS 4x8 as the purlins for roof and girts for siding. c) Alternatively, pour concrete columns to support the roof if the I-beam section is not sufficient. Let me know how much engineering and detailing would cost. I build workshop hangars frequently in remote locations for
portal frame, wahouse, factory desig
Project Description Hello, I have a small project I needed some help with. I am building a steel hangar using limited materials due to the locally available materials. The structure will be used as a workshop and will sustain vibration from the equipment. The locally available materials are very limited here in Somalia. I need the structural design and detailing for the below described building. All calculations must be submitted. Relevant Information for design: 1) 28m x 28m Building (See image below) 2) Drawing Plan Attached 3) Locally Available Materials: a) W200x59 and W200x39 (CSA) for beams and columns 6 meter lengths. If you need more details please let me know. b) I was planning to use light weight HSS 4x8 as the purlins for roof and girts for siding. c) Alternatively, pour concrete columns to support the roof if the I-beam section is not sufficient. Let me know how much engineering and detailing would cost. I build workshop hangars frequently in remote locations for
portal frame, wahouse, factory desig
Project Description Hello, I have a small project I needed some help with. I am building a steel hangar using limited materials due to the locally available materials. The structure will be used as a workshop and will sustain vibration from the equipment. The locally available materials are very limited here in Somalia. I need the structural design and detailing for the below described building. All calculations must be submitted. Relevant Information for design: 1) 28m x 28m Building (See image below) 2) Drawing Plan Attached 3) Locally Available Materials: a) W200x59 and W200x39 (CSA) for beams and columns 6 meter lengths. If you need more details please let me know. b) I was planning to use light weight HSS 4x8 as the purlins for roof and girts for siding. c) Alternatively, pour concrete columns to support the roof if the I-beam section is not sufficient. Let me know how much engineering and detailing would cost. I build workshop hangars frequently in remote locations for
portal frame, wahouse, factory desig
Project Description Hello, I have a small project I needed some help with. I am building a steel hangar using limited materials due to the locally available materials. The structure will be used as a workshop and will sustain vibration from the equipment. The locally available materials are very limited here in Somalia. I need the structural design and detailing for the below described building. All calculations must be submitted. Relevant Information for design: 1) 28m x 28m Building (See image below) 2) Drawing Plan Attached 3) Locally Available Materials: a) W200x59 and W200x39 (CSA) for beams and columns 6 meter lengths. If you need more details please let me know. b) I was planning to use light weight HSS 4x8 as the purlins for roof and girts for siding. c) Alternatively, pour concrete columns to support the roof if the I-beam section is not sufficient. Let me know how much engineering and detailing would cost. I build workshop hangars frequently in remote locations for
portal frame, wahouse, factory desig
Project Description Hello, I have a small project I needed some help with. I am building a steel hangar using limited materials due to the locally available materials. The structure will be used as a workshop and will sustain vibration from the equipment. The locally available materials are very limited here in Somalia. I need the structural design and detailing for the below described building. All calculations must be submitted. Relevant Information for design: 1) 28m x 28m Building (See image below) 2) Drawing Plan Attached 3) Locally Available Materials: a) W200x59 and W200x39 (CSA) for beams and columns 6 meter lengths. If you need more details please let me know. b) I was planning to use light weight HSS 4x8 as the purlins for roof and girts for siding. c) Alternatively, pour concrete columns to support the roof if the I-beam section is not sufficient. Let me know how much engineering and detailing would cost. I build workshop hangars frequently in remote locations for
portal frame, wahouse, factory desig
Project Description Hello, I have a small project I needed some help with. I am building a steel hangar using limited materials due to the locally available materials. The structure will be used as a workshop and will sustain vibration from the equipment. The locally available materials are very limited here in Somalia. I need the structural design and detailing for the below described building. All calculations must be submitted. Relevant Information for design: 1) 28m x 28m Building (See image below) 2) Drawing Plan Attached 3) Locally Available Materials: a) W200x59 and W200x39 (CSA) for beams and columns 6 meter lengths. If you need more details please let me know. b) I was planning to use light weight HSS 4x8 as the purlins for roof and girts for siding. c) Alternatively, pour concrete columns to support the roof if the I-beam section is not sufficient. Let me know how much engineering and detailing would cost. I build workshop hangars frequently in remote locations for
portal frame, wahouse, factory desig
Project Description Hello, I have a small project I needed some help with. I am building a steel hangar using limited materials due to the locally available materials. The structure will be used as a workshop and will sustain vibration from the equipment. The locally available materials are very limited here in Somalia. I need the structural design and detailing for the below described building. All calculations must be submitted. Relevant Information for design: 1) 28m x 28m Building (See image below) 2) Drawing Plan Attached 3) Locally Available Materials: a) W200x59 and W200x39 (CSA) for beams and columns 6 meter lengths. If you need more details please let me know. b) I was planning to use light weight HSS 4x8 as the purlins for roof and girts for siding. c) Alternatively, pour concrete columns to support the roof if the I-beam section is not sufficient. Let me know how much engineering and detailing would cost. I build workshop hangars frequently in remote locations for
portal frame, wahouse, factory desig
12405874
I'm currently seeking a seasoned Engineer who specialises in cfd to optimize structural canopy panel when train passing with velocity is 40kph .
CFD analysis to optimize canopy
I'm currently seeking a seasoned Engineer who specialises in cfd to optimize structural canopy panel when train passing with velocity is 40kph .
CFD analysis to optimize canopy
I'm currently seeking a seasoned Engineer who specialises in cfd to optimize structural canopy panel when train passing with velocity is 40kph .
CFD analysis to optimize canopy
I'm currently seeking a seasoned Engineer who specialises in cfd to optimize structural canopy panel when train passing with velocity is 40kph .
CFD analysis to optimize canopy
I'm currently seeking a seasoned Engineer who specialises in cfd to optimize structural canopy panel when train passing with velocity is 40kph .
CFD analysis to optimize canopy
I'm currently seeking a seasoned Engineer who specialises in cfd to optimize structural canopy panel when train passing with velocity is 40kph .
CFD analysis to optimize canopy
I'm currently seeking a seasoned Engineer who specialises in cfd to optimize structural canopy panel when train passing with velocity is 40kph .
CFD analysis to optimize canopy
9992892
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
11229033
Design Alu and Steel Stru Base on EU1999 and all code used for aluminium design calculation check Check Bridge Alu And Accessories .....................
Design Alu and Steel Stru Base on EU
Design Alu and Steel Stru Base on EU1999 and all code used for aluminium design calculation check Check Bridge Alu And Accessories .....................
Design Alu and Steel Stru Base on EU
Design Alu and Steel Stru Base on EU1999 and all code used for aluminium design calculation check Check Bridge Alu And Accessories .....................
Design Alu and Steel Stru Base on EU
Design Alu and Steel Stru Base on EU1999 and all code used for aluminium design calculation check Check Bridge Alu And Accessories .....................
Design Alu and Steel Stru Base on EU
Design Alu and Steel Stru Base on EU1999 and all code used for aluminium design calculation check Check Bridge Alu And Accessories .....................
Design Alu and Steel Stru Base on EU
Design Alu and Steel Stru Base on EU1999 and all code used for aluminium design calculation check Check Bridge Alu And Accessories .....................
Design Alu and Steel Stru Base on EU
Design Alu and Steel Stru Base on EU1999 and all code used for aluminium design calculation check Check Bridge Alu And Accessories .....................
Design Alu and Steel Stru Base on EU
Design Alu and Steel Stru Base on EU1999 and all code used for aluminium design calculation check Check Bridge Alu And Accessories .....................
Design Alu and Steel Stru Base on EU
4871393
Project Description I have a large 37m x 38m steel structure that requires detailed drawings to be used for fabrication and erection purposes. The main portals will be custom fabricated tapered box beams, and provisions made throughout the framework made for electrical lighting and sound system. Suit someone familiar with NZ building code and a SOLIDWORKS (or similiar) CAD package.
Project Description I have a large 3
Project Description I have a large 37m x 38m steel structure that requires detailed drawings to be used for fabrication and erection purposes. The main portals will be custom fabricated tapered box beams, and provisions made throughout the framework made for electrical lighting and sound system. Suit someone familiar with NZ building code and a SOLIDWORKS (or similiar) CAD package.
Project Description I have a large 3
12402598
steel building design and fabrication on tekla structure, this included design on robot and check by staad pro and shopdrawing also details
steel building design and fabricatio
steel building design and fabricatio
steel building design and fabricatio
steel building design and fabricatio
steel building design and fabricatio
steel building design and fabricatio
steel building design and fabricatio
steel building design and fabricatio
steel building design and fabricatio
steel building design and fabrication on tekla structure, this included design on robot and check by staad pro and shopdrawing also details
steel building design and fabricatio
steel building design and fabrication on tekla structure, this included design on robot and check by staad pro and shopdrawing also details
steel building design and fabricatio
3695135
Project Description Hello, I have a small project I needed some help with. I am building a steel hangar using limited materials due to the locally available materials. The structure will be used as a workshop and will sustain vibration from the equipment. The locally available materials are very limited here in Somalia. I need the structural design and detailing for the below described building. All calculations must be submitted. Relevant Information for design: 1) 28m x 28m Building (See image below) 2) Drawing Plan Attached 3) Locally Available Materials: a) W200x59 and W200x39 (CSA) for beams and columns 6 meter lengths. If you need more details please let me know. b) I was planning to use light weight HSS 4x8 as the purlins for roof and girts for siding. c) Alternatively, pour concrete columns to support the roof if the I-beam section is not sufficient. Let me know how much engineering and detailing would cost. I build workshop hangars frequently in remote locations for
portal frame, wahouse, factory desig
Project Description Hello, I have a small project I needed some help with. I am building a steel hangar using limited materials due to the locally available materials. The structure will be used as a workshop and will sustain vibration from the equipment. The locally available materials are very limited here in Somalia. I need the structural design and detailing for the below described building. All calculations must be submitted. Relevant Information for design: 1) 28m x 28m Building (See image below) 2) Drawing Plan Attached 3) Locally Available Materials: a) W200x59 and W200x39 (CSA) for beams and columns 6 meter lengths. If you need more details please let me know. b) I was planning to use light weight HSS 4x8 as the purlins for roof and girts for siding. c) Alternatively, pour concrete columns to support the roof if the I-beam section is not sufficient. Let me know how much engineering and detailing would cost. I build workshop hangars frequently in remote locations for
portal frame, wahouse, factory desig
Project Description Hello, I have a small project I needed some help with. I am building a steel hangar using limited materials due to the locally available materials. The structure will be used as a workshop and will sustain vibration from the equipment. The locally available materials are very limited here in Somalia. I need the structural design and detailing for the below described building. All calculations must be submitted. Relevant Information for design: 1) 28m x 28m Building (See image below) 2) Drawing Plan Attached 3) Locally Available Materials: a) W200x59 and W200x39 (CSA) for beams and columns 6 meter lengths. If you need more details please let me know. b) I was planning to use light weight HSS 4x8 as the purlins for roof and girts for siding. c) Alternatively, pour concrete columns to support the roof if the I-beam section is not sufficient. Let me know how much engineering and detailing would cost. I build workshop hangars frequently in remote locations for
portal frame, wahouse, factory desig
Project Description Hello, I have a small project I needed some help with. I am building a steel hangar using limited materials due to the locally available materials. The structure will be used as a workshop and will sustain vibration from the equipment. The locally available materials are very limited here in Somalia. I need the structural design and detailing for the below described building. All calculations must be submitted. Relevant Information for design: 1) 28m x 28m Building (See image below) 2) Drawing Plan Attached 3) Locally Available Materials: a) W200x59 and W200x39 (CSA) for beams and columns 6 meter lengths. If you need more details please let me know. b) I was planning to use light weight HSS 4x8 as the purlins for roof and girts for siding. c) Alternatively, pour concrete columns to support the roof if the I-beam section is not sufficient. Let me know how much engineering and detailing would cost. I build workshop hangars frequently in remote locations for
portal frame, wahouse, factory desig
Project Description Hello, I have a small project I needed some help with. I am building a steel hangar using limited materials due to the locally available materials. The structure will be used as a workshop and will sustain vibration from the equipment. The locally available materials are very limited here in Somalia. I need the structural design and detailing for the below described building. All calculations must be submitted. Relevant Information for design: 1) 28m x 28m Building (See image below) 2) Drawing Plan Attached 3) Locally Available Materials: a) W200x59 and W200x39 (CSA) for beams and columns 6 meter lengths. If you need more details please let me know. b) I was planning to use light weight HSS 4x8 as the purlins for roof and girts for siding. c) Alternatively, pour concrete columns to support the roof if the I-beam section is not sufficient. Let me know how much engineering and detailing would cost. I build workshop hangars frequently in remote locations for
portal frame, wahouse, factory desig
Project Description Hello, I have a small project I needed some help with. I am building a steel hangar using limited materials due to the locally available materials. The structure will be used as a workshop and will sustain vibration from the equipment. The locally available materials are very limited here in Somalia. I need the structural design and detailing for the below described building. All calculations must be submitted. Relevant Information for design: 1) 28m x 28m Building (See image below) 2) Drawing Plan Attached 3) Locally Available Materials: a) W200x59 and W200x39 (CSA) for beams and columns 6 meter lengths. If you need more details please let me know. b) I was planning to use light weight HSS 4x8 as the purlins for roof and girts for siding. c) Alternatively, pour concrete columns to support the roof if the I-beam section is not sufficient. Let me know how much engineering and detailing would cost. I build workshop hangars frequently in remote locations for
portal frame, wahouse, factory desig
Project Description Hello, I have a small project I needed some help with. I am building a steel hangar using limited materials due to the locally available materials. The structure will be used as a workshop and will sustain vibration from the equipment. The locally available materials are very limited here in Somalia. I need the structural design and detailing for the below described building. All calculations must be submitted. Relevant Information for design: 1) 28m x 28m Building (See image below) 2) Drawing Plan Attached 3) Locally Available Materials: a) W200x59 and W200x39 (CSA) for beams and columns 6 meter lengths. If you need more details please let me know. b) I was planning to use light weight HSS 4x8 as the purlins for roof and girts for siding. c) Alternatively, pour concrete columns to support the roof if the I-beam section is not sufficient. Let me know how much engineering and detailing would cost. I build workshop hangars frequently in remote locations for
portal frame, wahouse, factory desig
Project Description Hello, I have a small project I needed some help with. I am building a steel hangar using limited materials due to the locally available materials. The structure will be used as a workshop and will sustain vibration from the equipment. The locally available materials are very limited here in Somalia. I need the structural design and detailing for the below described building. All calculations must be submitted. Relevant Information for design: 1) 28m x 28m Building (See image below) 2) Drawing Plan Attached 3) Locally Available Materials: a) W200x59 and W200x39 (CSA) for beams and columns 6 meter lengths. If you need more details please let me know. b) I was planning to use light weight HSS 4x8 as the purlins for roof and girts for siding. c) Alternatively, pour concrete columns to support the roof if the I-beam section is not sufficient. Let me know how much engineering and detailing would cost. I build workshop hangars frequently in remote locations for
portal frame, wahouse, factory desig
Project Description Hello, I have a small project I needed some help with. I am building a steel hangar using limited materials due to the locally available materials. The structure will be used as a workshop and will sustain vibration from the equipment. The locally available materials are very limited here in Somalia. I need the structural design and detailing for the below described building. All calculations must be submitted. Relevant Information for design: 1) 28m x 28m Building (See image below) 2) Drawing Plan Attached 3) Locally Available Materials: a) W200x59 and W200x39 (CSA) for beams and columns 6 meter lengths. If you need more details please let me know. b) I was planning to use light weight HSS 4x8 as the purlins for roof and girts for siding. c) Alternatively, pour concrete columns to support the roof if the I-beam section is not sufficient. Let me know how much engineering and detailing would cost. I build workshop hangars frequently in remote locations for
portal frame, wahouse, factory desig
12405874
I'm currently seeking a seasoned Engineer who specialises in cfd to optimize structural canopy panel when train passing with velocity is 40kph .
CFD analysis to optimize canopy
I'm currently seeking a seasoned Engineer who specialises in cfd to optimize structural canopy panel when train passing with velocity is 40kph .
CFD analysis to optimize canopy
I'm currently seeking a seasoned Engineer who specialises in cfd to optimize structural canopy panel when train passing with velocity is 40kph .
CFD analysis to optimize canopy
I'm currently seeking a seasoned Engineer who specialises in cfd to optimize structural canopy panel when train passing with velocity is 40kph .
CFD analysis to optimize canopy
I'm currently seeking a seasoned Engineer who specialises in cfd to optimize structural canopy panel when train passing with velocity is 40kph .
CFD analysis to optimize canopy
I'm currently seeking a seasoned Engineer who specialises in cfd to optimize structural canopy panel when train passing with velocity is 40kph .
CFD analysis to optimize canopy
I'm currently seeking a seasoned Engineer who specialises in cfd to optimize structural canopy panel when train passing with velocity is 40kph .
CFD analysis to optimize canopy
9992892
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
Base on tekla US templete Design calculation structural and connection full bolts and nuts and welding, full shopdrawing, details part . ....
Design warehouse and assembly
11229033
Design Alu and Steel Stru Base on EU1999 and all code used for aluminium design calculation check Check Bridge Alu And Accessories .....................
Design Alu and Steel Stru Base on EU
Design Alu and Steel Stru Base on EU1999 and all code used for aluminium design calculation check Check Bridge Alu And Accessories .....................
Design Alu and Steel Stru Base on EU
Design Alu and Steel Stru Base on EU1999 and all code used for aluminium design calculation check Check Bridge Alu And Accessories .....................
Design Alu and Steel Stru Base on EU
Design Alu and Steel Stru Base on EU1999 and all code used for aluminium design calculation check Check Bridge Alu And Accessories .....................
Design Alu and Steel Stru Base on EU
Design Alu and Steel Stru Base on EU1999 and all code used for aluminium design calculation check Check Bridge Alu And Accessories .....................
Design Alu and Steel Stru Base on EU
Design Alu and Steel Stru Base on EU1999 and all code used for aluminium design calculation check Check Bridge Alu And Accessories .....................
Design Alu and Steel Stru Base on EU
Design Alu and Steel Stru Base on EU1999 and all code used for aluminium design calculation check Check Bridge Alu And Accessories .....................
Design Alu and Steel Stru Base on EU
Design Alu and Steel Stru Base on EU1999 and all code used for aluminium design calculation check Check Bridge Alu And Accessories .....................
Design Alu and Steel Stru Base on EU
4871393
Project Description I have a large 37m x 38m steel structure that requires detailed drawings to be used for fabrication and erection purposes. The main portals will be custom fabricated tapered box beams, and provisions made throughout the framework made for electrical lighting and sound system. Suit someone familiar with NZ building code and a SOLIDWORKS (or similiar) CAD package.
Project Description I have a large 3
Project Description I have a large 37m x 38m steel structure that requires detailed drawings to be used for fabrication and erection purposes. The main portals will be custom fabricated tapered box beams, and provisions made throughout the framework made for electrical lighting and sound system. Suit someone familiar with NZ building code and a SOLIDWORKS (or similiar) CAD package.
Project Description I have a large 3
12402598
steel building design and fabrication on tekla structure, this included design on robot and check by staad pro and shopdrawing also details
steel building design and fabricatio
steel building design and fabricatio
steel building design and fabricatio
steel building design and fabricatio
steel building design and fabricatio
steel building design and fabricatio
steel building design and fabricatio
steel building design and fabricatio
steel building design and fabricatio
steel building design and fabrication on tekla structure, this included design on robot and check by staad pro and shopdrawing also details
steel building design and fabricatio
steel building design and fabrication on tekla structure, this included design on robot and check by staad pro and shopdrawing also details
steel building design and fabricatio
Changes saved
4.9 · 110 Reviews
Reviews
User Avatar
Design Portal frame warehouse Steel • $150 USD
Excellent knowledge and very easy person to work with. Highly recommended
Ike A.
@ikeahmed
•
Flag of
West Bromwich, United Kingdom
•
18 days ago
Share
User Avatar
FEA Stress Analysis on Steel Structure • €135 EUR
Bui is a skilled freelancer. Job has been well done and released on time
Francesco V.
@Erreci
•
Flag of
San Giuliano Milanese, Italy
•
22 days ago
Share
B
Automotive Piston Design in Steel • $140 USD
I use him again , great work.
Edric C.
@Boresystems
•
Flag of
Raleigh, United States
•
4 months ago
Share
T
Handrail Modelling • $220 USD
Bui is very good to work with
Tim B.
@Tim376
•
Flag of
Brisbane, Australia
•
6 months ago
Share
T
BBC Awning • $350 AUD
Bui has completed our job on time and on budget. He has been very good to work with.
Tim B.
@Tim376
•
Flag of
Brisbane, Australia
•
6 months ago
Share
Experience
SENIOR DESIGN STRUCTURAL
Jan, 2000 - Present
•
24 years, 11 months
KIRBY ALGHALIN, ZAMIL STEEL
Jan, 2000 - Present
•
24 years, 11 months
DESIGN STEEL BUILDING BASE ON THE UNITED STATES, EUROPE STANDARD, AUSTRALIA. ASCE 2015, BS, AS1170...
Jan, 2000 - Present
•
24 years, 11 months
Education
Dai hoc Giao Thông Vân Tai
2000 - 2005
•
5 years
structural engineer
Flag of
Vietnam
2000 - 2005
•
5 years
Qualifications
senior structural engineer
2005
KIRBY COMPANY
senior structural engineer
2005
senior structural engineer
2005
HCMC University OF Technology
Etabs-Sap-Staad pro-Robot Structural Analysis-safe-Ram-Adapt-prokon-Autocad-Revit
2005
Certifications
P
Preferred Freelancer Program SLA
Invite sent successfully!
Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Freelancer logo Iceland / English
Help & Support
Freelancer
Categories Projects Contests Freelancers Enterprise AI Development Membership Preferred Freelancer Program Project Management Local Jobs Photo Anywhere Showcase API for Developers Get Verified Desktop App
About
About us How it Works Security Investor Sitemap Stories News Team Awards Press Releases Careers
Terms
Privacy Policy Terms and Conditions Copyright Policy Code of Conduct Fees and Charges
Partners
Escrow.com Loadshift Warrior Forum
Apps
Apple App Store logoGoogle Play logo
Copy to clipboard failed, please try again after adjusting your permissions.
Copied to clipboard.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2025 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.