STM32 Programming & Embedded System Development

$10-30 USD

Completed

Posted

21 days ago

$10-30 USD

Paid on delivery

DEVICE: STM32F429ZIT6 SOFTWEAR: STM32CubeIDE, Keil MDK Description: I am looking for an experienced embedded systems developer to complete a project involving STM32F429ZIT6 and STM32CubeIDE. The project includes tasks related to thread communication, sine wave generation, and both RTOS and bare-metal programming. Scope of Work: Analyze and Run a Demonstration Project: Use Keil MDK simulator to test and verify the provided project. Validate sine wave generation and implement functionality to adjust frequency and amplitude using GPIOE lines (PE8, PE9, PE1, and PE0). Document functionality with screenshots and include analyzer window outputs. Improve Sine Wave Quality: Implement amplitude regulation (0.0–400.0V). Replace real-time sine calculations with a LUT mechanism in a dedicated SineLut.c module. Reduce duty cycle to 50 microseconds or less. Additional Functionality in RTOS: Generate a cyclic pulse (1 ms duration, 5 ms duty cycle) using a new thread and osDelayUntil function. Include independently written code within UserThreads.c. Bare-Metal Implementation: Repeat the functionality without RTOS using bare-metal programming. Provide a comparison report covering implementation differences, memory usage, and performance. Deliverables: Working project files for STM32CubeIDE and Keil MDK Lite. Screenshots of simulation results, including analyzer outputs. Full source code (UserThreads.c, SineLut.c, and others as necessary). Comparison report between RTOS and bare-metal implementations. Short description to each task what was done for documentation. Requirements: Knowledge of STM32 microcontrollers, RTOS (CMSIS-RTOSv2), and Keil MDK. Experience with STM32CubeMX for configuration. Ability to implement embedded code.

Project ID: 38882070

About the project

10 proposals

Remote project

Active 19 days ago

Looking to make some money?

Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

Get paid for your work

Outline your proposal

It's free to sign up and bid on jobs

Awarded to:

@ayoubc83

programmation avec c++ c Payton Arduino and des autres longue programmation avec c++ c Payton Arduino and des autres longue

$20 USD in 7 days

0.0

(0 reviews)

0.0

10 freelancers are bidding on average $32 USD for this job

@Mahihassi

With my strong background in electrical engineering and extensive experience in embedded systems, I am confident that I can successfully complete your STM32 project. I have been working with microcontrollers including the STM32F429ZIT6 for numerous years, using different IDE's such as Keil MDK Lite and STM32CubeIDE. Not only can I test and verify the provided project on the Keil MDK simulator, but I can also implement new functionalities such as sine wave generation with adjustable frequency and amplitude using GPIOE lines. Additionally, one of my strengths lies in optimizing code performance which aligns well with your requirement to replace real-time sine calculations with a dedicated Look-up Table (LUT) mechanism. Apart from this, my knowledge in RTOS (CMSIS-RTOSv2) will prove invaluable in generating a cyclic pulse using new threads while utilizing osDelayUntil function. Finally, what sets me apart is my knack for documentation. With every task completed, you can expect detailed explanations and accompanying screenshots to help you visualize the progress made throughout the project. And of course, all the necessary files including full source codes and a comprehensive comparison report between RTOS and bare-metal implementations will be provided. Let me contribute my expertise to make your project a success!

$75 USD in 7 days

5.0

(258 reviews)

7.9

@Deployyit

Greetings I would like to grab this opportunity and will work till you get 100% satisfied with my work. Reviewed your complete details so Interested to contribute in your job according to your requirements with extensive experience So I am confident and interested in contributing to this one too. I always pay attention to copywrite & quality of Design. https://www.freelancer.com/u/Deployyit Lets connect in chat so that We discuss further. Thank You

$20 USD in 7 days

5.0

(1 review)

4.0

@jlunaantonio38

With years of experience, especially with Arduino devices and electronics, I'm confident in my ability to take on your STM32 programming and embedded systems development project. My thorough understanding of STM32 microcontrollers, Keil MDK and STM32CubeIDE, make me well-suited to analyze your provided project, test and verify it using Keil MDK simulator, and ensure that the sine wave generation is accurate and effective using GPIOE lines (PE8, PE9, PE1, and PE0). One area I believe aligns particularly strongly with your project is my expertise in working with both RTOS (CMSIS-RTOSv2) and bare-metal programming. I have utilized these systems extensively for a wide variety of applications ranging from thread communication to pulse generation such as the one you require. Additionally, I am well-versed in creating comparison reports that effectively summarize implementation differences, memory usage, and performance. In completing your project, not only do I aim to provide you with functioning project files for STM32CubeIDE and Keil MDK Lite but also screenshots of simulation results including analyzer outputs. Additionally, you will receive a report outlining what was done for documentation. Choosing me means working with someone who will put my time and efforts into delivering quality work that meets not only your needs but exceeds expectations.

$50 USD in 2 days

4.7

(2 reviews)

2.3

@DennySantosaTech

Dear Respected Customer, I have reviewed your project details for STM32F429ZIT6 and related deliverables. With expertise in STM32CubeIDE, Keil MDK, and RTOS, I can meet your requirements. I have implemented LUT-based sine generation and GPIO functionality in past work. I’ll use STM32CubeMX to configure peripherals and ensure accurate waveform generation. For RTOS and bare-metal tasks, I will document differences, performance, and memory use. Simulation outputs and analyzer results will be captured and shared as requested. Deliverables will include source code, project files, and detailed documentation. Thank you for hiring me.

$20 USD in 1 day

0.0

(0 reviews)

0.0

@jims6

Dear sir, I am confident that my experience and skills make me the best fit for this project. I have a rich of experience in hardware and firmware development for consumer electronic for 10+ years. Also for example, I had designed and developed several devices such as CNC control device, Fingerpint Lock, PLC device, Temperature sensor device etc using STM32 , PIC , Atmega , Atmel, FriendlyARM(micro2440/6410,Tiny210). I had developed firmware and Control Programs using C/C++ , and I have many experience for 10+ years. I have a rich of knowledge of hardware design and circuitry , PCB design because i had developed much devices. I have a ability to work collaboratively in a team environment and excellent communication and problem-solving skill. I can support for 6+ months, and I can complete your project for your timeline. I want to keep long term relationship with you. I am always available in anytime and I can work full-time your project(40+ hours per week). Looking forward to hearing from you. Thanks and regards.

$10 USD in 2 days

0.0

(0 reviews)

0.0

@SGopi1007

I am a professional Embedded engineer and have expertise in solving electronics problems. I have written multiple codes on different microcontrollers like Atmega328p, Atmega2560, ESP32 series, Attiny series, STM32 series, STM8S series, N76E003, etc.. I have experience in designing various electronic circuit and PCB boards using the latest designing tools. Currently I am working as an Embedded Engineer in a reputed firm which is located in Chennai as Software and Hardware . My expertise and experience in the field of electronics will be an asset for you and helpful in solving your problems.

$20 USD in 12 days

0.0

(0 reviews)

0.0

@omara665

This project aims to develop a portable device that measures and analyzes periodic pulse using advanced sensors. The system will include a user-friendly app to display real-time data and generate periodic health reports. It targets individuals, athletes, and healthcare professionals seeking accurate and affordable solutions. The device will focus on precision, ease of use, and scalability for additional features.

$20 USD in 7 days

0.0

(0 reviews)

0.0

@Ankitan24

I have industrial experience of 3 years for working on STM32 and it's environment.I have worked in various similar projects which would help me to work in this project

$30 USD in 10 days