Hello!
I'm creating a board game that is composed of four circular rings of decreasing size: Ring One (outer ring): 20-inch diameter, 3-inch width; Ring Two: 14-inch diameter, 2-inch width; Ring Three: 10-inch diameter, 2-inch width; Ring Four (inner ring): 6-inch diameter, 2-inch width. (All rings are currently 1/4" thick, but both the thickness of the board and the dimensions of each ring are subject to change based on the progress you and I make with this project request.)
PROJECT REQUEST: I need help designing a 3D model for a printable central turning mechanism that will simultaneously turn the board's rings at different speeds--each ring must turn at half the speed of the next-largest ring and twice the speed of the preceding smaller ring. Ring Four (inner ring) will be divided into four equally-sized quarters and must turn at twice the speed of Ring Three. Ring Three will be divided into eighths and must rotate at half the speed of Ring Four and twice the speed of Ring Two. Ring Two will be divided into sixteenths and must rotate at half the speed of Ring Three and twice the speed of Ring One. And Ring One must rotate at half the speed of Ring Two, 1/4th the speed of Ring Three, and 1/8th the speed of Ring Four. I require assistance with figuring out the appropriate gear ratios for this task. ChatGPT says they would be this:
Summary of Gear Ratios:
Ring Four to Ring Three: 1.2
Ring Three to Ring Four: 0.357, Ring Three to Ring Two: 1.429
Ring Two to Ring Three: 0.35, Ring Two to Ring One: 1.4
Ring One to Ring Two: 0.5, Ring One to Ring Three: 0.25, Ring One to Ring Four: 0.125
Ideally, the central turning mechanism will be easy to rotate by hand and be spherical (imagine the sun at the solar system's center--the rings are the orbit of planets, the central turning mechanism is the sun). As for holding up the rings, one option would be for plastic arms to horizontally extend from a cylindrical central turning mechanism and have platforms at the end of each arm to hold up the rings of the board. The final board would need to be flat for gameplay's sake, so the arms for the larger, outer rings could be positioned lower than the arms for the smaller, inner rings. The ends of each arm could then connect to vertical bars that rise up to meet the flat resting height of the board. The rings would then rest on the platforms connected to the vertical bars of each arm, creating an evenly flat board. Note that there would probably need to be a slight gap between each ring in order for them to turn smoothly--not too big for game pieces to fall in or get stuck, but big enough so that the rings don't get caught on eachother.
If these descriptions are confusing, consider the arms of a clock: the minute hand and hour hand are connected to the same central mechanism and gear ratios allow the arms to turn at different speeds. This can be accomplished manually when you need to adjust the time. For the purposes of creating a flat board, imagine the minute hand of a clock is the lowest hand and has a platform connected to it that would allow a ring to sit atop it. The shorter hour hand would be positioned atop the minute hand and have a similar platform connected to it allowing a smaller inner ring to meet the height of the board. Then add two more hands and we could have four total rings resting in a flat position.
Of course, the rings would be too precarious and might fall off if only one arm per ring extended from the central turning mechanism to support each ring. Thus, it may be necessary to have two or even four arms per ring extend out from the central turning mechanism, creating a very sturdy, flat surface for the rings to rest atop. Finally, the rings can't rotate TOO fast. Doing so would cause game pieces to fly off the board.
Please let me know if you have any questions about this project request. I have attached two pictures of the board: one is an unpainted version of the board with accurate dimensions; the other is a painted prototype board with improper dimensions and an incorrect inner ring. I hope they will help you visualize what I am looking for.
Thank you very much for your time!
- Grant
---
**Ideal Skills and Experience:**
- Proficient in 3D modeling and printing
- Experience with plastic materials
- Creativity in design to bring game concepts to life
- Time-efficient and detail-oriented freelancers with a portfolio showcasing past work in 3D-printed game products will stand out. Looking forward to innovative and engaging designs!
Hello Sir, I hope you are great.
✔️✔️✔️Super Excited for this Strategy Board Game. ✔️✔️✔️
I hope this message finds you well. I am writing to express my interest in providing Mechanical Design services for strategy board game. With a strong background in mechanical engineering and a passion for creating innovative and functional products, I believe I can be a valuable asset. My expertise are in transforming ideas and concepts into fully realized, manufacturable products. I am highly skilled in CAD software and in graphic designing software. I have a proven track record of delivering high-quality design solutions.
For your project I offer: -
1. 3D models of strategy board game.✔️
2. Technical and fabrication Drawings. ✔️
3. Material analysis. ✔️
4. Manufacturing Consultancy. ✔️
5. BOM / BOQ. ✔️
6. Competitive Pricing. ✔️
My objective is here to become a reliant member of this project and your future projects. I’m looking for long term collaboration. My Profile: - https://www.freelancer.pk/u/AhmadHusnain1
Thanks
Ahmad
$250 USD 2 napon belül
5,0
(9 értékelés)
3,7
3,7
29 szabadúszó adott átlagosan $395 USD összegű árajánlatot erre a munkára
Hello,
i am ready exited to work you as i read your job description Strategy Board Game Piece Creation
I am also an expert in making 2d,3d modelling and animating characters 2dautocad drawing ,elevation, solid work, Revit ,FBX ,Unity, Render also interior and exterior design. I have experience in field of more than 5+ years. I can Create Intro and Explainer Videos. for products and companies. Kindly check My Portfolio as well. Hope for your very soon reply.
Thank you
Hello There
I have read your project "Strategy Board Game Piece Creation". We would like to offer our professional 3D modeling services for the creation of a Model , Floorplan video and banner advertisement for your software.
Our team understands the importance of visual representation in the advertising industry, and we are confident that our skills and expertise can help bring your vision to life.
We have extensive experience in creating high-quality 3D models for various industries, including the construction and engineering sector.
Our team is equipped with the latest software and hardware technologies, enabling us to produce highly detailed and realistic models.
For your project, we will create a 3D model that showcases the deep excavation, building foundations, tunnels, subway lines, landslides, gravity walls, ports, and other features of your software. We will also incorporate the analysis results into the model to provide a complete picture of what is happening below and above the ground. We guarantee that all of our work will be delivered on time and to the highest standards of quality.
Our team is dedicated to ensuring customer satisfaction, and we are confident that you will be pleased with the final result. Please let us know if you would like to proceed with our services.
We look forward to the opportunity to work with you and bring your vision to life. Sincerely,
STUDIO GO
Hi,
I am a 3D Artist position for your company as you are looking for Strategy Board Game Piece Creation
With my expertise in 3D modeling, texturing, and animation, I believe I am a great fit for this role.
I have previously worked on the exact same type of project for a different client.
I have designed all kinds of 3D products and all quality 3D working styles in the following competencies:
Your project implementation requires basic skills such as 3D modeling, 3D rendering, and architecture, 2d-3d architetcural drafting.
Thank you
Regards
Manu Sharma.
Hi Good evening , I have read the brief details on your job listing and currently going through attached files . I see you have been looking for someone experienced with 3D Modelling, CAD/CAM, Game Design and 3D Rendering. Its been 8 years since I have been working on freelancer.com, I have 9 years of experience doing similar jobs. I would request you to check my profile and review projects, feedbacks of projects related to those skills.
Questions:
1. These are all the requirements of your job or do you have more? If yes, Please provide detailed requirements in chat and let me review and get back with queries.
2. Do you currently have anything done or this job has to be done from scratch?
3. What is the timeline to get this job done?
4. Are you open to use 3rd party APIS for it even if they are paid?
Why Choose Me?
1. I have done more than 250 major projects only on freelancer.com.
2. I have not received a single bad feedback since last 5-6 years.
3. You will find 5 star feedback on last 100+ major projects which shows my clients are happy with my work.
Portfolio: https://www.freelancer.com/u/AwaisChaudhry
Timings: 9am - 9pm Eastern Time (I work as a full time freelancer)
Please initiate the chat so we could discuss it in detail and we will continue from there. Thanks! Awais
As an experienced Mechanical Engineer and Product Development designer, I offer the blend of skills you need to bring your board game project to life. My proficiency in 3D CAD modeling is particularly relevant to your request for the designing a printable central turning mechanism with specific gear ratios that will drive the different rings of your board game at unique speeds. I have worked on several similar projects where precision and attention to detail were paramount, enabling me to navigate complex mechanical problems like this effectively.
My work doesn't end with creating the model. I have the practical experience needed in turning theoretical designs into workable solutions, managing projects from conceptualization through prototyping and even manufacture. This means that not only can I help you design the turning mechanism, but I can also guide you through the prototyping, testing, and eventual creation of your final piece.
Finally, my commitment to quality aligns well with your expectations; no project is too small or too big for me - every task receives my utmost attention. With me, you're not only getting someone passionate about product development but also someone who is dedicated to turning ideas into reality while keeping efficiency and functionality at the forefront. Let's embark on this journey together and create a first-class board game experience for players!
As an experienced 3D artist and game designer with over a decade of involvement in the field, I possess all the necessary skills to undertake your intricate project. My area of expertise and attention to detail make me well-equipped to collaborate with you on every aspect of this ambitious strategy board game creation.
I appreciate the requirement for a precise gear ratio that harmoniously coordinates the motion of your multiple rings. My profound knowledge in 3D modeling and rendering would be instrumental in designing a tangible central turning mechanism which perfectly aligns with your specifications. Further, I can create 3D print-friendly STL model designs allowing you to materialize your envisioned game from concept to completion.
Finally, my satisfaction lies within my clients' gratification. Therefore, if provided this opportunity, be prepared for an open line of communication where I shall pay full attention to your inputs and adjustments even as we progress forward. Let's bring your game vision to life!
Hello,
I came to understand that you need a Strategy Board Game Piece Creation.
I have already completed similar work. I want to show you some of my 3D creations.
Softwares in which I specialise include 3d Max/Maya, Blender, Revit, C4D, and other 3D programmes. I also work with AutoCAD.
- You will receive all 3D model file formats, such as OBJ, STL, etc.
- Create any type of 3D model, including character and object models.
- Interior/exterior design for home plans, models, etc.
My top concern is your complete satisfaction since I want to build a long-lasting business relationship with you.
Regards and thanks
Harvinder
Hello Grant R.,
I have read your project requirements and I am confident that I can assist you in creating a 3D model for the central turning mechanism of your strategy board game. I have over 7 years of experience in 3D modeling, CAD/CAM, and game design, and I have a passion for helping clients succeed.
I would like to connect with you in chat to discuss the project in more detail and ensure that I fully understand your vision. You can find examples of my previous work in my portfolio:
https://www.freelancer.in/u/gajerakrishna0
I can start working on the project immediately and will strive to deliver the results as soon as possible. I have a strong knowledge of gear ratios and can assist you in determining the appropriate ratios for the different rings of your board game.
Thank you for considering my proposal. I look forward to the opportunity to work with you and bring your game concept to life.
Best regards,
Krishna
Hey
I have been in the architecture field for over 15 years, focusing increasingly on interior design in the last 6 years. I earned my degree from Istanbul Technical University and hold certifications in LEED AP BD&C and Certified Passive House Designer. I am proficient in a variety of design tools such as AutoCad, Sketchup, Vray, Enscape, and Photoshop, and also specialize in energy analysis for Passive House designs using PHPP. My experience extends to on-site work, managing construction teams both locally and remotely. I communicate effectively in both English and Turkish.
In interior design, my aim is to create spaces that are both visually appealing and functional, ensuring they are easy to use and live in. I believe in design that combines aesthetics, practicality, and sustainability, with a particular interest in integrating elements of nature into my designs.
Every project is an opportunity for learning and excellence, and I am committed to delivering high-quality results. I am eager to contribute my skills and passion to your project. Please explore my commercial and residential interior design work showcased on my website.
I am good at CAD/CAM, Game Design, 3D Modelling and 3D Rendering.
With my wealth of experience as a mechanical design engineer, specifically in utilizing and maximizing the potential of CAD software, I am confident in navigating the complexities of your project. My goal is not just to design a 3D model but to ensure that the printable central turning mechanism successfully achieves your desired results. I am meticulous and creative in problem-solving, a skill that will prove invaluable as we determine the intricate gear ratios needed for each specific ring rotation, granting your board game impeccable precision.
Moreover, I understand the essence of your vision: creating a central turning mechanism that resembles the sun and its orbiting planets. This idea of analogy resonates with me as I believe successful designs are rooted in cohesive concepts.
Lastly, my commitment to staying at the forefront of mechanical designs ensures our collaboration will be one driven by innovation. My knowledge of different CAD softwares - whether Solidworks, Creo Parametric or Onshape- gives me the flexibility to adapt to meet your needs making sure that no matter where we are headed with dimensions on thickness and dimensions it won't be a challenge. Together, we can transform intricate design concepts into tangible, usable board games that will excite players. Let's bring your interactive vision to life!
Hello sir,
I am a 2D 3D Model artist here on the platform (Freelancer) for the past 4-5 years.
I read your job for the 2D 3D work regarding : Strategy Board Game Piece .
I have extensive experience in creating 3D models from scratch, including characters, environments, and objects.
I can work with a variety of software, including Maya, 3Ds Max, and Z brush.
And also, I have excellent texturing skills, and I am experienced in creating realistic materials and textures for 3D models.
Also, I will do setting up and rendering scenes for 3D projects.
I am familiar with different rendering engines, such as Mental Ray and V-ray, and I can produce high-quality, photo-realistic renders.
So kindly message me so we can discuss the work and make a good deal.
Thanks and regards,
Sumit.
Leveraging my experience bpy creating 3D models as an artist for over 5 years, I posses the technical skills and understanding to assist you turn this amazing vision into reality. My job is to give life to your idea and that’s exactly what I intend to do with your board project but even better! More specifically, I am well versed in creating intricate yet intuitive mechanisms, and I am confident that I will be able to devise a central turning mechanism for your board game that will perform perfect rotations at the respective speeds you've specified. As an example picture the hands of a clock moving smoothly and efficiently.
One of my strengths as a designer is visualization and creativity to make your idea come alive combined with technical expertise to ensure functionality. Your piece needs to function well and I’ll make sure that happens. It may be necessary to have multiple arms extending to hold each ring - something like installing multiple joints holding a hanging platform just right except beautifully crafted in design that matches this creative sun-planet system-theme.
In conclusion, British statesman Winston Churchill once said: "We shape our buildings; thereafter they shape us", in the same light, this game piecemodelling requires precision tailor-made approach which I'm offering. Just like on my past projects I’ll please you with quality results within time limit and guarantee customer satisfaction. Take the bold step today.
Hello,
Just gone through your project Strategy Board Game Piece Creation
briefly
I'm an enthusiastic 2d & 3d artist with great hand in 3d modelling and animation, rendering, texture lighting, Revit, AutoCAD, max.
will provide you best quality work.
I am a good 2d & 3d artist
Please visit my portfolio
Hope to work with you soon
Thanks & Regards.
Sofiya
Hi Grant,
Having thoroughly understood the requirements, we're enthusiastic about partnering with you to design a 3D-printed central turning mechanism for your innovative board game. Our expertise in Game development, Graphic design, 3D modeling, 3D rendering, and printing, coupled with a deep understanding of plastic materials, positions us to create a spherical component that ensures smooth manual rotation while maintaining stability. Our design will feature multiple arms per ring, providing a sturdy and flat surface for gameplay, with careful consideration to prevent rings from rotating too fast and disrupting the gaming experience.
Drawing inspiration from your clock analogy and leveraging our experience in 3D-printed game products, we're confident in our ability to bring your vision to life. Customer satisfaction is our utmost priority so feel free to contact us if you want more information to kick-start the work right away. Samples will be furnished on chat.
We look forward to the opportunity to contribute to the success of your unique board game.
Best regards,
BiTMESH Technologies
With 7+ years of experience in mechatronics and proficiency in CAD/CAM, I believe I am an excellent fit for your Strategy Board Game Piece Creation project. My extensive background in Mechanical Design Engineering has equipped me with the skills needed to design and develop complex, multi-part systems, like the 3D rotating mechanism you described with varying speed ratios for each ring. I leverage SOLIDWORKS to create accurate and efficient designs, ensuring your central turning mechanism precisely executes the desired functionalities.
As a Mechatronics engineer, I've worked on numerous projects involving gears, motors, and multiple moving parts. This experience allows me to tackle the challenge of determining optimal gear ratios for your proposed mechanisms with ease and precision. Additionally, my ability to understand complex mechanical systems quickly will ensure that any changes in dimensions or other design elements as we progress through the project can be handled smoothly.
Notably, my team’s vast array of expertise complements my capabilities perfectly, which could prove invaluable if we encounter any unexpected circumstantial needs during the project.
I look forward to working with you.
Welcome
After giving a thorough read to your Strategy Board Game Piece Creation
I will deliver ideal results according to your needs
because I am qualified designer to meet up your demand
My skills and proficiency helped me to achieve 5.0 star rating and I still work hard to maintain our achievement.
for your convenience and satisfaction, I can provide you unlimited revisions
I will Provide you Source files along with jpg,png,pdf for the project
you will surely be happy with our services at the end.
Regards,
Crown Concepts
Hello Grant R.. I have thought carefully about your job – “Strategy Board Game Piece Creation”.
"Fast delivery, high quality and accuracy."
These were the customer reviews of my work.
I have solid knowledge and mastery of 3D Rendering, Game Design, 3D Modelling and CAD/CAM.
My experience and skills make me well suited to this project.
I guarantee you will get more than you expected.
Please do not hesitate to contact me if you would like to discuss further.
Warm Regard!
Hello Grant R.
Going through your project description, you are looking for a developer who has rich experiences on those 3D Rendering, Game Design, CAD/CAM and 3D Modelling fields.
My last project is very similar to your project.
Let's discuss in more details.
King Regards
Lovely
With over a decade of extensive 3D design experience, I'm confident that I can bring your board game vision to life with all its intricate mechanical components. My skills in 3D modeling and understanding of CAD/CAM, combined with software proficiency in 3DS MAX, Cinema 4D, and SolidWorks, provide me with the necessary tools to accomplish your project while offering the highest level of precision in detailing.
I thoroughly comprehend the gear ratio specifications as provided. Utilizing this information effectively allows me to construct a central turning mechanism that replicates the movement dynamics you're seeking. I will ensure each ring rotates at the precise speed relative to its adjacent size as per your requirement. Understanding the importance of practical use, I will create a design that is simple to rotate by hand while maintaining a flat gameplay surface.
I will design sturdy plastic arms extending from a cylindrical central turning mechanism with platforms to hold each ring securely in place. My solutions will not only guarantee stability for each piece but also contribute to an engaging gaming experience where no part gets caught or creates interruptions.
Overall, as an experienced professional driven by client satisfaction, I promise meticulously designed and executed models using programs. Your project will be met with proficiency and dedication at every stage until you're absolutely satisfied with the result.
We at Crecer Studio provide excellent services with a lot of hard work, Excellence, artistic understanding, and creative abilities. We have successfully worked on national and international projects with the highest ratings that awestruck our customers and made them choose us again and again. We excel at what we do and thus we deliver exemplary results. Whatever the kind of project it is, We deal with ease. Our end goal is to make our clients happy with our artistic excellence. We are known for our swift responses. We never compromise on the quality and that’s what made us rule the industry.
About Work
We are looking for the projects of 3D scan cleanup and want to work on them if possible please give us this opportunity to work on your projects to showcase our teamwork and you will not be disappointed with the work done. We are working with the RestAR, Unity, Ten24, etc. company currently.
We have seen your 3D scan people on your company web site. It's really very high quality, and you are working on a 4D project right now, it's really interesting, and we want to work with your company.
We hope that you will give us 1 chance to work with you. We promise that we will give you the best quality and quantity.
