I'm seeking assistance with a thermal analysis of a 3D model in ANSYS, specifically focusing on heat distribution. I have model but it needs a little bit improvement. I have file in .stp format. I need basically a diffusion/dispersion analysis and checking an altering the system if it achieve the requirements or needs further modification. Your tasks will involve: - Running simulations to assess the mixing of hot water with cold water inside a diffuser tank. There are two diffusers top and bottom inside a tank. The tank is insulated so that the process is adiabatic. The water comes to tanks from top diffuser and goes out from the bottom diffuser. - Providing insights and recommendations based on the simulation results. - Assisting with the optimization of the project based ...
I'm seeking an expert in ANSYS fluid dynamics simulation for a continuous casting process who can model the behavior of a liquid under varying temperature conditions and solidification processes. The primary purpose of this simulation is for academic research, so a deep understanding of the relevant physical principles and the ability to deliver precise, detailed results is crucial. Key Requirements: - Proficiency in fluid dynamics simulation software - Extensive knowledge of liquid properties, particularly viscosity, density and solidification processes - Experience in undertaking simulations for academic research Ideal Skills: - Strong analytical and problem-solving skills - Excellent attention to detail - Ability to present complex data in an understandable way
I'm seeking an expert in Ansys who can assist with parameter optimization and data analysis. The primary focus will be on process parameters. Ideal skills: - Proficiency in Ansys for simulation and optimization - Experience in parameter optimization - Strong data analysis skills Key responsibilities: - Conduct simulations and optimize parameters - Analyze data to derive meaningful insights
Estoy haciendo una simulación de un plato perforado tengo todo realizado, la geometría, el mallado y el setup pero en un momento de la simulación en la gráfica de residuales se eleva mucho, tampoco tengo un computador para que se haga el proyecto rápido. I am doing a simulation of a perforated plate. I have everything done, the geometry, the meshing and the setup, but at one point in the simulation the residual graph rises a lot. I also do not have a computer to do the project quickly.
Estoy haciendo una simulación de un plato perforado tengo todo realizado, la geometría, el mallado y el setup pero en un momento de la simulación en la gráfica de residuales se eleva mucho, tampoco tengo un computador para que se haga el proyecto rápido
I am looking for an experienced professional to perform a simulation of a 3D axial flow fan turbomachinery r...such as: Contour plots Blade loading distribution Efficiency and performance graphs Any other relevant insights Deliverables: 1. A detailed report including operating curves and analysis. 2. Visualization outputs (e.g., contours, blade loading, etc.). 3. Simulation files for future reference. Preferred Skills: Expertise in turbomachinery simulations Proficiency in CFD tools such as ANSYS CFX, Fluent, or similar software Knowledge of axial flow fan design and analysis If you are confident in your skills and have relevant experience in similar projects, please provide your proposal with a timeline and cost estimate. I look forward to collab...
I'm seeking an expert in GMSH for meshing a 3D model. The mesh should consist primarily of hexahedral elements, as it will be used for Computational Fluid Dynamics (CFD) simulations. Key Requirements: - Proficient in using GMSH software - Extensive experience in creating hexahedral meshes - Familiarity with Computational Fluid Dynamics (CFD) requirements - Ability to deliver high-quality, precise meshes for complex simulations. Please provide examples of similar projects you have successfully completed in the past.
I'm seeking a professional with extensive experience in thermal simulations. The project revolves around a PCB board housed in a plastic enclosure. Key tasks include: - Conducting a detailed thermal simulation to identify potential hotspots on the PCB and within the enclosure. - Providing recommendations to improve cooling efficiency. - Ensuring the selected ma...enclosure. Key tasks include: - Conducting a detailed thermal simulation to identify potential hotspots on the PCB and within the enclosure. - Providing recommendations to improve cooling efficiency. - Ensuring the selected materials can safely withstand the thermal stresses encountered during operation. Ideal candidates will have expertise in using thermal simulation software, with a preference for ANSYS, SolidWo...
Scope of Work: Payment Solution for CFD Platform in Africa We are seeking quotes from payment specialists to design, build, and implement a seamless payment solution for a CFD trading platform targeting the following African countries: Nigeria, Ghana, Uganda, Cameroon, and Zambia. The system should enable real-time deposits and withdrawals for clients, routing funds to and from international bank accounts. Scope of Work 1. Payment Gateway Integration: • Integrate localized payment methods (cards, bank transfers, and mobile money) for each target country using PSPs • Ensure real-time processing of deposits and withdrawals. 2. Currency Conversion & Settlement: • Implement a currency conversion mechanism to support deposits in local currencies and settl...
I'm seeking a skilled CFD analyst to evaluate three cambered airfoils at two specific Reynolds Numbers: 166,000 and 638,000. The analysis must be conducted using ANSYS Fluent. Key Requirements: - Proficient with ANSYS Fluent - Experienced in CFD analysis of cambered airfoils - Able to interpret and present results clearly The successful freelancer will have the opportunity to work on a challenging project with potential for future work.
I'm seeking an HVAC design professional who can help me install a central air system in my single-family home. The primary goal of this project is to ensure a cost-effective installation without compromising on quality and performance. Ideal skills and experience for the job: - In-depth knowledge of central air systems - Experience with cost-effective HVAC installations - Ab...with budget constraints - Familiarity with various HVAC brands and their cost-effectiveness - Excellent problem-solving skills to ensure optimal design within budget constraints - Ability to provide package that will be approved by Yavapai County Home under reconstruction has a very odd six sided shape and a job meeting prior to engineering would be required. Owner has a specific pathway for duct...
I need a professional who is highly skilled in ANSYS software to help me model 5 concrete, rectangular beams under cyclic loading. I have precise dimensions for the beams. The ideal freelancer for this project should have: - Extensive experience with ANSYS software - Strong background in engineering, specifically in beam modelling under cyclic loading - Ability to understand and work with precise specifications If you meet these criteria and can deliver high-quality models, please get in touch. Thank you!
I'm seeking a mechanical design expert to help develop a diaphragm pump intended for fluid handling. The project requires: - Designing the pump using any proficient CAD software. - Selecting materials that are cost-effective yet durable and suitable for the application. - Using simulations (CFD/FEA) to optimize the pump's performance and durability. - Preparing detailed engineering drawings and a comprehensive Bill of Materials (BOM). - Offering guidance for the prototyping and testing phases. Ideal candidate should have: - Extensive experience in mechanical design and diaphragm pump development. - Proficiency in CAD software. - Strong understanding of cost-effective material selection. - Experience with simulations for mechanical design. - Ability to prepare detailed en...
I need a CFD simulation expert to model a battery pack using the MSMD model, focusing specifically on thermal management through a phase change material cooling system. Key Requirements: - CFD Simulation experience, particularly with battery packs. - Proficiency with the MSMD model. - Understanding of thermal management strategies. - Experience with designing cooling systems using heat pipes. - Knowledge of phase change materials and their application in cooling systems. Your task will be to assess the cooling system's design and optimize it for effective thermal management.
We require CFD simulations to analyse the performance of a soda lime CO2 absorber, which is used to scrub CO2 from exhaled breath in a closed breathing loop. This one-time project aims to improve our understanding of the absorber's performance and lifespan by addressing airflow dynamics, pressure loss, and chemical reactivity. CAD geometry will be provided.
I'm seeking a skilled professional with experience in ABAQUS Simulia to simulate shoulder movement using two types of prosthetics - reverse and custom made. Key Aspects: - The primary focus of the simulation will be the range of motion of the shoulder with each type of prosthetic. - I have...range of motion of the shoulder with each type of prosthetic. - I have existing 3D models for the prosthetics, so no assistance will be needed in that regard. Deliverables: - The simulation report should include visual animations and numerical data. - Graphs and charts are not necessary. - video of the process Ideal candidates for this project should have: - Proficiency in ABAQUS Simulia or Ansys. - Experience with biomechanical simulations. - Ability to present data in a clear and acc...
... Design Inputs for Support System: Specific structural inputs tailored to Hilti’s product selection for pipe support systems. Requirements Proven expertise in structural analysis of piping systems. Experience with chilled water systems and pipe supports. Familiarity with industry standards (e.g., ASME, local building codes). Proficiency in relevant tools : (CAESAR II, ANSYS, SAP2000). Strong ability to present technical findings in tables, graphs, and diagrams. Proposal Submission Include the following in your proposal: Summary of qualifications and relevant projects. Approach to the analysis and report preparation. Estimated timeline for completion. Proposed fee for the project. Deadline for Submission Submit all proposals v...
I need Electric and Magnetic field plotting using ANSYS methodology. I will provide the following details 1. Transmission tower dimensions 2. Operating voltage value 3. Different current scenarios. I need a 2D cross section of the E-Field and H-Field mapping from source till +100 and -100 metres distance. An example of this is provided in the image attached below.
1. Overview This design is for a control-focused padel racket targeted at beginners and defensive players. The racket must comply with official padel regulations and feature unique design elements for performance and aesthetics. The project includes CFD (Computational Fluid Dynamics), FEA (Finite Element Analysis), and vibration analysis to simulate real-life performance, structural integrity, and ball interaction during gameplay. 2. Dimensions The overall length of the racket is 455 mm (45.5 cm). The head diameter is 255 mm (25.5 cm), with a thickness of 38 mm (1.5 inches). The handle measures 120 mm (12 cm) in length and 30 mm (3 cm) in width. The throat width, where the handle transitions to the head, is 60 mm. 3. Material Requirements The frame material is high-density carbon ...
...designs should be versatile, but maintain a high radiant level of luxury elegance and sophistication. Key Task: *Designing and engineering luxury furniture pieces *Creation and integrating mechanical, mechanism, components, and functionality into each design *3D/4D renderings (inner and outer layered design) *2D designs *CAD ready designs *Sewing/stitching pattern and designs *Structural analysis (ANsys) *BOM and BOL list *Manufacture instructions/guide Key requirements: *Versatility with hands-on expertise and a thorough understanding of furniture design and engineering, with a keen sense for current trends and techniques on a broad variety of luxury furniture production. *Experience in designing upholstered and solid wood (carvings) furniture *Ability to visualize with a keen...
Note: Please read before bidding, I have mentioned all the details in the PDF so increasing the bidding price later will not be accepted. Check the PDF attached for a detailed description. Objective: Design a pasteurization room that u...carefully placed nozzles to avoid hot spots and ensure uniform temperature distribution. - Overhead water spray system for rapid cooling. Deliverables: - 3D Model & Layout of the room along with nozzles placed. - Nozzle/Diffuser Placement & Specifications. - CFD Analysis and Iterations to confirm uniform heating. - Recommendation for sensor locations. - Heating Time Estimates (time required to reach pasteurization temperature). Required Expertise: Mechanical or Chemical Engineer with expertise in steam-based systems, thermal processes, a...
...looking for an expert in Computational Fluid Dynamics (CFD) to analyze an oscillating wave surge converter. This project will focus on the structural integrity (using Fluid-Structure Interaction or FSI), the hydrodynamic performance and the power output of the converter under different wave speeds (low, medium and high). Key project requirements: - Conducting a detailed CFD analysis using Siemens Star CCM+ Marine or Flow3d - Evaluating the structural integrity of the converter under different conditions - Analyzing the hydrodynamic performance of the converter - Measuring the power output with varying wave speeds - Presenting findings in a clear and comprehensive manner Ideal candidates for this project should have: - Extensive experience with CFD and FSI - Profic...
I need assistance with validating a research paper using Ansys. I am currently pursuing my Mtech and have a mid-project review coming up. This task is straightforward and I just need some suitable results to present at my review. The analysis will focus on: - Fluid dynamics , Heat transfer , Phase Change The material under analysis will be: - PV modules, specifically: - Polycrystalline PV modules - PCM ( Phase Change Material) Skills and experience that would be beneficial for this project include: - Proficient in using ANSYS software - Understanding of fluid dynamics , CFD and Heat transfer - Ability to deliver reliable results in a timely manner.
...the most efficient design. The project involves creating CAD models for each AWE system in SolidWorks and conducting CFD simulations using ANSYS Fluent to analyze their performance under various wind conditions. Key Deliverables 1. CAD Models in SolidWorks: o Design detailed 3D CAD models for the two AWE systems: Kite-Based System Tethered Balloon (Aerostat) System o Ensure models are optimized for aerodynamic analysis, including critical features like airfoil shapes, tethers, and structural components. o Deliver models in SolidWorks file format (.SLDPRT) and exported compatible formats (.STEP, .IGES) for CFD simulations. 2. CFD Simulations in ANSYS Fluent: o Conduct CFD simulations for both CAD models to analyze: Lift-to-drag ratios. Pr...
I'm looking for an experienced algorithm developer to create a simple mean reversion trading algorithm for me. The algo should be implemented in Python and be capable of automated trade execution on IG Index and DMA Trader CFD platforms. Key Requirements: - Develop a mean reversion trading algorithm - Implement it in Python - Link to platforms - Ensure it can execute trades automatically on specified platforms Ideal Skills and Experience: - Proven experience in developing trading algorithms - Proficiency in Python - Familiarity with IG Index and DMA Trader CFD platforms
I need a skilled web developer to create a modern and minimalist personal portfolio website. The site will showcase my research, publications, skills, and useful resources, primarily to attract academic collaborators. Key Features: - Home Section: A brief introduction and an inspirational quote. - Skills & Expertise Section: Highlighting my technical proficiencies (e.g., LaTeX, CFD, Ansys FLUENT). - Projects & Publications Section: Listing my research highlights, thesis, and journal articles. - Useful Links Section: Featuring academic resources and courses. - Contact Page: With an integrated form for inquiries. - Social Links: To my LinkedIn and faculty page. The design should be simple, professional, and mobile-responsive. I can provide additional content and asset...
I'm looking for an expert who can develop a User Defined Function (UDF) in ANSYS Fluent for analyzing the aerodynamic performance of a foldable flapping wing. The project should be completed within a week. Key Focus: - The primary focus is on the aerodynamic performance of the wing. - Critical parameters for analysis include lift and drag forces, as well as flow patterns around the wings. Refer: Reference: Guerrero, J. E., Pacioselli, C., Pralits, J. O., Negrello, F., Silvestri, P., Lucifredi, A., & Bottaro, A. (2016). Preliminary design of a small-sized flapping UAV: I. Aerodynamic performance and static longitudinal stability. Meccanica, 51, 1343-1367. Video: Refer above, before confirming your bids. Requirements: - The analysis should be done
This UDF (User Defined Function) is designed to model the transpiration phenomena of tomato plants in a simulated environment using ANSYS Fluent. The UDF calculates thermal and moisture exchanges based on environmental parameters such as ambient temperature and relative humidity, considering the plants as porous parallelepiped blocks. The objective is to understand and simulate the impact of climatic conditions on the internal dynamics of the plants. The code initializes the internal temperature and water fraction within the domain's cells. It employs empirical and physical relations to estimate stomatal and aerodynamic resistances, heat flux, vapor pressure difference (DPV), and convection properties based on flow regimes (natural, mixed, or forced convection). The UDF also co...
I'm looking for an expert in ANSYS Fluent and fluid dynamics analysis to perform a PCM heat sink analysis. Key requirements: - Proficient in ANSYS software with a focus on Fluent - Extensive experience in fluid dynamics analysis - Familiarity with PCM heat sink technology - Capable of providing detailed CFD simulations and flow modelling Your expertise will help assess the thermal performance and efficiency of the PCM heat sink under various conditions.
Project Description: We are looking for an experienced CFD freelancer to work on a buffer tank simulation project. This task is designed to gauge your capabilities in solving complex mixing and heat transfer problems. If successful, we have additional buffer tank projects and a pipeline of CFD work in the future. Objective: The goal is to analyze the tank's performance and propose effective internal design modifications to achieve strict compliance with the following requirements: Compliance: The outlet temperature must meet 14°C ± 1°C at 240 seconds. Tank Parameters: Adiabatic conditions: The tank is thermally insulated, with no heat gain or loss. Dimensions: Tank diameter 3100mm, height 6100mm. Pipe Orientation: Current inlet and outlet pipe orientatio...
I'm looking for a skilled professional who can design and simulate mi...with a thin isolator between them to prevent crosstalk. - The design should recommend the lenses' material. MATERIAL CHARACTERISTICS: - While the specific material characteristics: low losses an well focused beam SOFTWARE: - The preferred simulation software for this project is ANSYS HFSS. Equivalent tools can be considered as well MAIN PRIORITY: - The primary goal is to ensure each of the lenses focuses the beam with a 'field depth' of about 5 cm. IDEAL CANDIDATE SKILLS: - Proficient in ANSYS HFSS or similar tool - Experience in designing and simulating millimetric wave lenses. - Knowledge about suitable materials for lens design. Your expertise will help in ac...
I am looking for an expert in ANSYS Fluent to carry out a project on simulating a droplet falling on a moving porous substrate, specifically a sponge. The focus will be on understanding the droplet impact dynamics. Key Requirements: - Proficient in ANSYS Fluent - Previous experience with droplet impact simulations - Able to compare simulation results with published research data for validation - Understanding of sponge as a porous substrate The ideal freelancer will have a strong background in fluid dynamics and experience with droplet impact dynamics. They will also have the ability to validate simulation results with published research data.
I'm looking for a professional with expertise in Ansys FLUENT, specifically the Reynolds-Averaged Navier-Stokes (RANS) turbulence models. My primary interest lies in using these models to predict turbulent flows in open channels. Key requirements include: - Proficiency in using Ansys FLUENT - Extensive knowledge of RANS turbulence models - Experience in predicting turbulent flows in open channels - Ability to explain complex concepts in a simple manner Please provide a detailed proposal on your approach to this project, including your relevant experience and how you plan to help me achieve my objectives.
I am looking for an expert in Fluid Structure Interaction (FSI) to conduct a 3D simulation of a heart valve using ANSYS. Requirements: - Utilize the provided 3D CAD model and boundary conditions - Conduct the simulation considering hyperelastic material properties - Deliver comprehensive outputs detailing fluid structure interaction I have previously conducted a 2D simulation and can provide reference images and journal papers if needed. The project timeline is 2 weeks. Ideal candidates should have extensive experience with ANSYS and FSI simulations, as well as a strong understanding of hyperelastic material properties. Proficiency in interpreting and presenting complex simulation outputs is crucial.
Project Overview: Objective: Analyze ski vibrations and evaluate the effectiveness of a vibration reduction system (e.g., Atomic’s Servotec) using ANSYS simulations. Key Deliverables: Dynamic analysis of ski vibration without and with a vibration reduction system. Simulation results demonstrating the effectiveness of the reduction system. Optimization suggestions for the reduction system, if applicable. Key Project Components: Ski Modeling: Create a detailed 3D model of a ski (geometric and material properties). Incorporate realistic material parameters like elasticity, damping, and density. Vibration Reduction System: Research and model a vibration reduction system like Servotec or similar mechanisms. Simulate the integration of the system into the ski. Simulation Setup: D...
I have an Ansys . file containing a geometric 2D shape that needs to be extracted and edited in SolidWorks. The edits required are primarily structural modifications. Once the modifications are complete, the final file needs to be saved as an SLDPRT. Ideal skills and experience for the job: - Proficient in SolidWorks with a strong background in 2D to 3D design conversion - Experience with structural modifications in SolidWorks - Familiarity with Ansys file formats and extraction processes - Ability to deliver in specific file formats, particularly SLDPRT.
I'm looking for a professional with expertise in ANSYS to help me extract data related to deformation and displacement from the program. The extracted data should be delivered in Excel format. Please note, I might require some post-processing depending on the quality of the raw data.
Security Transaction Cost Deposits And Withdraw Trading Platform Execution Customer Service Support Panel Live Market Update CFD Trading User Panel Contract For Different Option Administration Panel Currency Pairs easy User Interface Support 100+stock Assets ; Forex Currency ; metal ; crypto etf
I need an expert in Ansys software to help me simulate a biomass gasification process. The feedstock will be sorghum stalks, and the goal is to understand how varying inputs of air and steam will affect the composition of syngas. Key tasks include: - Performing simulations based on specified air and steam inputs - Analyzing and reporting on the resulting syngas composition Ideal candidates will have: - Extensive experience with Ansys software - A strong understanding of gasification processes - Ability to interpret complex simulations and provide clear, concise reports
I require a comprehensive Finite Element Analysis (FEA) on my 4x4 chassis model. The analysis should help in understanding the stress distribution, deformation patterns, and potential failure points under static conditions. The model will be provided in STEP file format. Ideal Skills: - Proficiency in using FEA software (like ANSYS, Abaqus, or similar) - Expertise in structural analysis - Experience with automotive chassis analysis What I Expect: - Detailed report on stress distribution - Insights on deformation patterns - Identification of failure points Please ensure you have the necessary skills and experience before bidding.
I am looking for an expert in Fluid Structure Interaction (FSI) to conduct a 3D simulation of a heart valve using ANSYS. Requirements: - Utilize the provided 3D CAD model and boundary conditions - Conduct the simulation considering hyperelastic material properties - Deliver comprehensive outputs detailing fluid structure interaction I have previously conducted a 2D simulation and can provide reference images and journal papers if needed. The project timeline is 2 weeks. Ideal candidates should have extensive experience with ANSYS and FSI simulations, as well as a strong understanding of hyperelastic material properties. Proficiency in interpreting and presenting complex simulation outputs is crucial.
Preferred simulation tool is ANSYS. The project requires fluid dynamics simulation. The fluid to be simulated is Water. The specific flow rate to be simulated is 0.1 m/s. Please provide the results in contours and Excel data. The simulation should use specific geometry provided. The project timeline is 2 weeks. The primary objective of this simulation is performance analysis. The specific geometry will be provided in a CAD file. Include pressure drop measurements in the simulation results.
I'm seeking an experienced ANSYS professional for an acoustic analysis project focusing on the vibration of polymer materials. Key Requirements: - Proficient in ANSYS for acoustic analysis. - Expertise in vibration analysis. - Experience working with polymer materials. Your responsibilities will include: - Conducting thorough vibration assessments on specified polymer materials. - Utilizing ANSYS to predict and analyze potential acoustic issues. - Providing comprehensive reports on findings with possible recommendations. Ideal candidates will have: - A strong engineering background with a focus on acoustics and vibration. - Proven experience with ANSYS and polymer materials. - Excellent communication skills for report writing and discussing findings.
Hello I need to simiulate Human tooth on Ansys, I can give you stl files, so you need to convert stl files to stp files and assemble. you need to simulate assemble on ansys workbench. I need this simulation report after you done. Budget is only 100 USD
I need a simple finite element analysis (FEA) for a small trench shoring structure. Requirements: - The primary focus of t...analysis (FEA) for a small trench shoring structure. Requirements: - The primary focus of this analysis will be the load capacity of the shoring system. - The ideal freelancer should be proficient in FEA and have experience working with shoring structures, particularly trench shoring systems. - Knowledge of load capacity analysis is crucial. - Proficiency in using specific FEA software such as ANSYS, ABAQUS, or SolidWorks Simulation. - Understanding of materials used in shoring systems, such as steel, timber, or aluminum. - Details of any previous projects involving trench shoring systems or similar structural analyses. Please include relevant experience in...
...like to have some kind of stone or tile around the beer cave. Lighting and Ambiance A focus on lighting design and how it enhances the store’s aesthetic, focusing on different areas (wine displays, sandwich counter, cooler, etc.). The rendering will help explore lighting strategies that highlight premium products and create a cozy, upscale ambiance. The ceiling is an open ceiling, with a long duct trunk going across the entire store. We'd like to paint the ceiling, opening up the store. Materials and Finishes Visuals that demonstrate the materials, finishes, and color schemes to be used throughout the store, ensuring consistency in design while reflecting the high-end nature of the store’s offerings. Also would like to see where additional things can go, l...
