任务： 1、集成Arduino，实现正常的初始化、连接Arduino硬件，并且支持向Arduino上传代码； 2、UI调整； 以上第1步已经完成集成Arduino部分，初始化、连接存在BUG，需修复，上传代码功能待实现。
我有进行中的、与之前的项目相关的工作parsing jsonarray using Arduino mega with esp8266-12 '
主要是想仿真一个激光测距的，暂时可以不考虑激光传感器，只需要模拟出计算时间差然后乘以光速，最后显示在LCD显示器上。自己已经做了一部分，proteus图已经画好，程序但是有点问题，求帮忙，有偿。
需要一位热衷 Arduino、电子设计的玩家创客帮忙介绍一个拇指般大小 32 位 Arduino 兼容开发板给中国的玩家. 这小小 38mmx18mm 的开发板功能含: 100MHz 32bit RISC / FPU + 1MByte Flash + 212KByte RAM + 2 UART + 2 SPI + 1 PWM + 17 GPIO + GPS 接收器. 售价 $12 (不含 GPS 有源天线). 性价比远超越在群众募资网站 Kickstart上能看到的任何 Arduino 相关开发板 (Digispark, Microduino, Tinyduino, Galago, Teensy 3.0...). 目标是 10 天内帮 NavSpark 活动增加 250 位中国区的支持赞助者, $500 做酬劳, 超过或不及都照比例计算. 例如: 增加 200 位中国区支持赞助者则以 US$400 做酬劳, 1000 位则以 US$2000 做酬劳. NavSpark 活动网址:
...Display Product Information: The scanned data will be shown on a user application and a hardware display. Provide Audio Feedback: The hardware will include a speaker for notifications or feedback. Key Requirements Hardware Development Selection and configuration of QR code scanner, display screen, speaker, and Wi-Fi module. Integration of hardware components using platforms like Raspberry Pi, Arduino, or other suitable alternatives. Backend Development Design and implementation of a database to store product information (e.g., MySQL, MongoDB). Development of secure and efficient APIs for data exchange between the hardware, database, and user application. Frontend Development Creation of a user-friendly mobile app (iOS/Android) to display product details in real-time. Development ...
I need a PCB designed and laid out for a medium-sized consumer electronics product. The PCB should be as small as possible - ideally ~50mm x 50mm. Key Requirements: - Design a PCB suitable for consumer electronics...high-quality Gerber files I have prototyped with a breadboard and am now doing the same with a prototype PCB but want to get a proper PCB layout sorted with a gerber so I can get a professionally made up PCB for testing. I have a drawing of all the components and connections (see attached) but no experience of laying out a board. Not entirely sure how many layers I need/etc. Board includes: 1x Arduino Nano ESP32 1x MCP6002 2x 5V switched relays (currently using a pre-made board for this which has some other minor components) 16x resistors 4x capacitors 12x screw wire ...
I'm seeking a programmer to finalize the coding for my two-wheel line follower module, which utilizes an ESP32 S3. This project involves making the module controllable via a mobile app, specifically Dabble or MIT App Inventor. Key requirements: - Completion of the provided code to ensure compatibili...with a Bluetooth-based app. - Implementation of the line-following functionality. - Use of Infrared (IR) sensor for navigation. The project will involve working from a shared schematic and partially completed code. The ideal freelancer will have: - Extensive experience with ESP32 S3 programming. - Proficient in PlatformIO or C++ - Strong coding skills to complete the project efficiently. Note: Arduino ide may not be sufficient for this task therefore esp idf or platformIO ski...
I'm looking for an expert in MATLAB to create a simulation for a 3-4 Degree of Freedom (DOF) robotic arm. Key Aspects: - The primary purpose of this project is educational, so the simulation should be designed with a focus on teaching and demonstrating robotic arm principles. - The simulation should be accurate in movement. Ideal Skills: - Extensive experience with MATLAB - Background in robotics - Teaching experience or understanding of educational software design Please note that the project may involve some back and forth to ensure the simulation meets educational standards, and your patience and ability to communicate complex concepts simply will be key to our success.
I need a skilled Arduino professional to design a compact, wireless device for me. This device will blink an LED light on a predetermined date, operating on a long-lasting battery. Key Requirements: - The device should be suitable for indoor use. - It needs to be as small and compact as possible. - Experience with Arduino is a must. - Prior work with designing battery-powered devices is preferred. - Knowledge of LED circuitry is desirable. - Understanding of timing mechanisms for the LED blinks. - Ability to ensure efficient power usage for long battery life.
I am looking for a freelancer who can provide me with the Arduino Bluetooth code specifically designed for the Wifi Lora V3. The code should be optimized for performance and reliability. Please include a brief description of the code's functionalities and potential use cases.
I'm looking for an expert in MATLAB to create a simulation for a 3-4 Degree of Freedom (DOF) robotic arm. Key Aspects: - The primary purpose of this project is educational, so the simulation should be designed with a focus on teaching and demonstrating robotic arm principles. - The simulation should be accurate in movement. Ideal Skills: - Extensive experience with MATLAB - Background in robotics - Teaching experience or understanding of educational software design Please note that the project may involve some back and forth to ensure the simulation meets educational standards, and your patience and ability to communicate complex concepts simply will be key to our success.
I'm looking for an Arduino expert who can create software to manage 5-8 valves. The software should also control an LCD display to show valve status information. Key Requirements: - Control of 5-8 valves - LCD display interface - Displaying valve status information Ideal Skills: - Proficiency in Arduino programming - Experience with valve control systems - Knowledge in interfacing with LCD displays - Understanding of real-time status monitoring and display
...an Arduino board for a robotics application. This project is centered around controlling servos. The main focus is on basic position control of these servos based on the data from a flight simulator (X-Plane12) for pitch and roll. Ideal skills and experience for the job include: - Receiving UDP datarefs from X-Plane - Processing the data to send instructions to a board (Arduino) - Proficiency in programming Arduino boards (Python or Arduino) - Experience with flat servos robotics and controlling them with the board - Understanding of basic position control mechanisms - Familiarity with the integration of sensors with Arduino boards I'm looking for a freelancer who can help me bring this project to life. If you have a passion for robotics and a ...
I'm seeking a skilled professional with expertise in IoT development, PCB design, and radio circuit design to assist in the prototyping stage of my project. The primary purpose of the IoT Arduino PCB is to carry out various tasks, including IoT, PCB, and radio circuits. Key Requirements: - Extensive experience in IoT development - Proficient in PCB design - Skilled in radio circuit design - Able to help move project from prototyping to final production - Capable of innovative thinking for diverse task applications Your role will be instrumental in advancing this project. Your skills can help transform this prototype into a successful final product.
I am seeking a professional skilled in Matlab Simulink with experience in designing and simulating robotic arms. The project involves creating a detailed simulation of a robotic arm, and potentially developing it for a specific application in industrial automation, educational purposes, or research and development. The project involves: - Designing a robotic arm in Matlab Simulink Plus Arduino - Simulating its functionalities such as gripping, lifting, and precision movements - Potentially applying it to industrial automation or educational purposes Ideal candidates will have: - Extensive knowledge of Matlab Simulink - Experience in designing and simulating robotic arms - Ability to create detailed simulations and potentially develop them for specific applications
I am seeking a professional skilled in Matlab Simulink with experience in designing and simulating robotic arms. The project involves creating a detailed simulation of a robotic arm, and potentially developing it for a specific application in industrial automation, educational purposes, or research and development. The project involves: - Designing a robotic arm in Matlab Simulink Plus Arduino - Simulating its functionalities such as gripping, lifting, and precision movements - Potentially applying it to industrial automation or educational purposes Ideal candidates will have: - Extensive knowledge of Matlab Simulink - Experience in designing and simulating robotic arms - Ability to create detailed simulations and potentially develop them for specific applications
I am seeking a professional skilled in Matlab Simulink with experience in designing and simulating robotic arms. The project involves creating a detailed simulation of a robotic arm, and potentially developing it for a specific application in industrial automation, educational purposes, or research and development. The project involves: - Designing a robotic arm in Matlab Simulink Plus Arduino - Simulating its functionalities such as gripping, lifting, and precision movements - Potentially applying it to industrial automation or educational purposes Ideal candidates will have: - Extensive knowledge of Matlab Simulink - Experience in designing and simulating robotic arms - Ability to create detailed simulations and potentially develop them for specific applications
Project Name: Design, Programing and simulation of a 3-4 DOF robotic arm using simulink and arduino Software: Matlab Simscape Hardwares (I Have): 1) arduino mega 2560 r3 2) servor mg90s 3) 1.5v - 6v r300c mini dc motor rpm3500 4) sg90 micro servor motor 9g(360°) 5) dual channel motor driver modul L298N H-bridge 6) jumper wire cable 7) breadboard 8) robotic arm kit 6dof Deadline 2 days $20 nzd
...professional to design, program and simulate a 3-4 Degree of Freedom (DOF) robotic arm using Simulink and Arduino. The primary application and specific tasks for the robotic arm have not been defined yet, and I am open to suggestions based on your expertise. This project will require you to demonstrate creativity and engineering skills in developing a versatile robotic arm. Key Tasks: - Design a 3-4 DOF robotic arm - Program the arm using Arduino - Simulate the arm using Simulink - Suggest and implement potential applications and tasks for the arm - Provide comprehensive documentation of the design and programming process The ideal freelancer for this project should have: - Extensive experience with Arduino and Simulink - A strong background in robotics and mechan...
...professional to design, program and simulate a 3-4 Degree of Freedom (DOF) robotic arm using Simulink and Arduino. The primary application and specific tasks for the robotic arm have not been defined yet, and I am open to suggestions based on your expertise. This project will require you to demonstrate creativity and engineering skills in developing a versatile robotic arm. Key Tasks: - Design a 3-4 DOF robotic arm - Program the arm using Arduino - Simulate the arm using Simulink - Suggest and implement potential applications and tasks for the arm - Provide comprehensive documentation of the design and programming process The ideal freelancer for this project should have: - Extensive experience with Arduino and Simulink - A strong background in robotics and mechan...
Hi there I did read your project description and it looks you are looking for an electronics engineer having experience in circuit, PCB layout designing, and microcontrollers coding/firmware development. My name is Engr. Saddam Gul, I am an electronics engineer having 5+ years of experience in circuits designing, PCB layout designing, and embedded system microcontrollers (Arduino, ESP32, FPGA, C2000, STM, and Rpi) coding/firmware development. I have successfully executed numerous complex projects, which you can view in my portfolio as samples. Please feel free to share more details about your project, and don't hesitate to contact me for any further discussions. Thank you Regards Engr. Saddam Gul
I'm working on an Arduino project that involves various hardware components and I need help with several aspects of it. - Main Goal: The project revolves around both hardware and coding. - Hardware: The project will use sensors, motors, and displays. - Specific Tasks: I need assistance with circuit design and wiring, writing and debugging code, and integrating the hardware components. Ideal skills and experience for this job would include: - Extensive knowledge and experience with Arduino - Proficiency in circuit design - Strong coding skills, especially in Arduino's programming language - Experience with various hardware components like sensors, motors, and displays - Excellent debugging skills - Able to integrate hardware components seamlessly
Help met get NMEA output by a NEO M9N GPS (Sparkfun) parsed by tinygps (serial) so that info looks smooth / nice in the serial output in Arduino. So I want to combine the SFE_UBLOX_GNSS with Tinygps how the simple sketch output/serial is now: $GNRMC,234015.00,A,4852.78123,N,0222.56312,E,0.027,,271224,,,D,V*14 $GNVTG,,T,,M,0.027,N,0.050,K,D*38 $GNGGA,234015.00,4852.78123,N,0222.56312,E,2,12,0.69,2.6,M,45.9,M,,0000*41 $GNGSA,A,3,10,02,17,21,08,32,,,,,,,1.20,0.69,0.99,1*02 $GNGSA,A,3,71,79,65,88,87,80,,,,,,,1.20,0.69,0.99,2*02 $GNGSA,A,3,27,34,30,04,36,06,09,,,,,,1.20,0.69,0.99,3*00 $GNGSA,A,3,28,34,11,16,06,21,,,,,,,1.20,0.69,0.99,4*07 $GPGSV,4,1,13,01,74,289,,02,79,295,37,03,37,229,20,08,33,170,21,1*65 $GPGSV,4,2,13,10,17,056,34,14,23,283,,17,23,312,18,21,77,103,37,1*65 $GPGSV,4,3...
Help met get NMEA output by a NEO M9N GPS (Sparkfun) parsed by tinygps (serial) so that info looks smooth / nice in the serial output in Arduino. So I want to combine the SFE_UBLOX_GNSS with Tinygps how the simple sketch output/serial is now: $GNRMC,234015.00,A,4852.78123,N,0222.56312,E,0.027,,271224,,,D,V*14 $GNVTG,,T,,M,0.027,N,0.050,K,D*38 $GNGGA,234015.00,4852.78123,N,0222.56312,E,2,12,0.69,2.6,M,45.9,M,,0000*41 $GNGSA,A,3,10,02,17,21,08,32,,,,,,,1.20,0.69,0.99,1*02 $GNGSA,A,3,71,79,65,88,87,80,,,,,,,1.20,0.69,0.99,2*02 $GNGSA,A,3,27,34,30,04,36,06,09,,,,,,1.20,0.69,0.99,3*00 $GNGSA,A,3,28,34,11,16,06,21,,,,,,,1.20,0.69,0.99,4*07 $GPGSV,4,1,13,01,74,289,,02,79,295,37,03,37,229,20,08,33,170,21,1*65 $GPGSV,4,2,13,10,17,056,34,14,23,283,,17,23,312,18,21,77,103,37,1*65 $GPGSV,4,3...
I'm looking for a skilled and experienced professional in raspberry pi or Arduino design and programming, with a strong background in home automation projects. Need to design with all components noted in image. Must provide links to purchase items to build working unit. Time Frame: 2 weeks Budget: as low as possible Ideal skills for this project: - Extensive knowledge and experience with raspberry pi or Arduino - Ability to design a user-friendly system - Proficiency in programming and troubleshooting - Creative problem-solving skills Program: Scan barcode and play audio based on barcode Audio can be paused, skip forward or back Led screen shows audio track #, battery life Requirements: ,schematic, PCB design, BOM ,components and website to find these co...
I'm looking for a seasoned profession...This project involves configuring the server to serve static files (HTML, CSS, JS) and handling real-time data updates. Key Responsibilities: - Configure the ESP32 to serve static web content and handle real-time updates. - Enable the ESP32 to process query/response data to a serial device. Skills and Experience Required: - Deep understanding of ESP32 and LILYGO T-SIM7000G. - Proficiency in Arduino IDE. - Previous experience in setting up web servers on ESP32. - Familiarity with AT commands and the manual of the T-SIM7000G. - Ability to configure for real-time data updates. The ideal candidate would have read the manual of the T-SIM700G prior to bidding, as the setup will be based on AT commands. Please ensure you meet these criteria b...
Necessito de alguem que consiga auxiliar em um projeto de um detector de fumaça controlado por arduino esp32 que se comunica com dispositivos celulares.
I...engineer with a strong background in AVR microcontroller programming. My current project utilizes the ATmega 1284P microcontroller, and the development environment is CodeVision AVR. Key tasks will include: - Debugging and troubleshooting: I need someone who can effectively identify and solve issues in the code. - Code optimization: While I primarily focus on debugging, I also value someone who can enhance the performance of the code. You will have access to: - Detailed Documentation: I have comprehensive documentation for the project available for you. Ideal candidates will have: - Extensive experience with Embedded C and AVR microcontrollers. - Proficient skills in debugging and optimizing code. - Previous experience working with CodeVision AVR...
I'm seeking an expert with Arduino and robotics experience to create a voice-controlled, obstacle-avoiding vehicle. The vehicle must be capable of selecting an optimized path from a source to a destination using an open-source GPS API. Key Project Details: - The vehicle should start and stop based on voice commands. - In the event of an emergency, the vehicle should halt upon receiving a voice command. -vehicle speed should be controlled by voice command or web application -vehicle should maintain average speed when speed is not set through voice command or web application -vehicle speed must reduce when an obstacle is triggered or based on road conditions - The vehicle must follow a predetermined path under normal conditions. -it has to notify user when gps connection is ...
I need a project that sequentially writes numbers on a Common Anode seven-segment display using Proteus. The programming language or tool to be used has not been de...need a project that sequentially writes numbers on a Common Anode seven-segment display using Proteus. The programming language or tool to be used has not been decided yet, so you can recommend the best one based on your expertise. Key requirements: - Expertise in Proteus and seven-segment display implementation. - Ability to recommend a suitable programming language or tool (C/C++, Assembly, or Arduino IDE). - Experience in creating projects that display numbers sequentially. Your understanding of sequential numbering and Common Anode displays will be crucial for the success of this project. Looking forward to your ...
I'm seeking an expert to adapt a touchscreen for use with the Squareline Studio editor. The primary aim is to empower my engineers (who aren't software engineers) to design a GUI within Squareline, generate the code, and upload it to an ESP32 using the Arduino environment. Key project components: - The GUI should incorporate buttons and sliders as the main graphical elements. - The ESP32 should be capable of controlling devices, monitoring data, and triggering events through the touchscreen. - Utilization of the LittlevGL (LVGL) library in conjunction with Squareline Studio is necessary. Ideal candidates for this project should have: - Extensive experience with touchscreen integration and ESP32 microcontrollers. - Proficiency in Squareline Studio and the LVGL library. - ...
My project involves troubleshooting an ESP32 Arduino code that integrates with a NEO-8M GPS module. Currently, the GPS data is not appearing on the serial monitor and this issue needs to be rectified. Key Requirements: - Maintain the original code structure and logic while debugging. - Modify the code to output full GPS data (including time and date) to the serial monitor. - Ensure that the GPS coordinates are accurately displayed. Ideal Skills and Experience: - Proficient in Arduino programming, particularly with ESP32. - Experienced with NEO-8M GPS module integration. - Strong debugging skills to identify and fix code issues. - Able to maintain the integrity of the original code structure and logic.
I'm seeking assistance with programming support for my Vision Master E290 using Arduino. Specifically, I need help setting up the Arduino IDE on my Windows system.
Job will be to program a small capacitive IPS, TFT LCD touch screen controller to a remote 12-channel relay board. UART2: TTL/CMOS. communications. There is software available for the small 2.1 inch touchscreen and menu icons, and to assist in firmware. The relay board would prefer to utilize Raspberry Pi Arduino and use pre-configured circuit board. for 12v relay outputs. The outputs will be controlled by the touch screen controller's selection icons and menu's. The conclusion is to have a circular touchscreen controller with visible picture/icons that will: 1) push to activate an ignition relay. 2) Menu's to activate all additional relays on/off functions with picture icons for each selected choice. Price: $50-100
I'm seeking a skilled professional to assist with integrating my Guition ESP32-S3-4848S040 board into SquareLine Studio for the Arduino IDE. The ultimate goal is to produce a complete set of files that adhere to the specified requirements. Here are links to descriptions of a board, specifically mine is ESP32-S3, ST7701, GT911, and requires the CH340 driver: General description: Additional information about the board: I am looking for a fully functional set of files for SquareLine Studio that meet the requirements outlined below: Ideal Skills and Experience: - Proficient in C/C++ programming - Experienced in
I'm seeking a freelancer to develop Arduino code for controlling the TEF6686 IC and an accompanying, user-friendly Android app that interfaces with an Arduino Nano via USB. The project has a max budget of 100 euros, and I prefer a freelancer who is active and communicative. The Arduino code should: - Control the TEF6686 IC for FM tuning and RDS data - Handle seek functionality - Monitor signal strength - Ensure smooth USB communication with the Android app The Android app, while not overly complicated, should have a simple, intuitive interface with features such as: - Frequency display - Tuning controls (with presets) - RDS display (program name and program info) - Signal strength bar - USB status (connected/disconnected) The app should be similar to a stock ...
...looking for a arduino firmware engineer to create a firmware for an ArtNet node with DMX/RDM support based on the RP2040 + RS485 transceiver. This project is similar to the typical artnetnodes available on GitHub for ESP32 or ESP8266. Key Responsibilities: - Develop firmware to support ArtNet4(Poll/Reply, ArtDMX, ArtRDM) as a gateway to DMX and RDM, with RDM handling efficiency as a priority for 1 universe/RS485 connection - Ensure the DMX settings are fixed for maximum performance for RDM, with only 1-2 DMX frames per second. - Implement USB network communication instead of WiFi (with DHCP server on RP2040 and fix host adress 2.2.2.1 and 2.2.100+ for the PC client) - No web server for configuration required. Ideal Skills and Experience: - Extensive experience with a...
ESP32 Arduino Sketch and Google Sheets Script We are looking for a skilled developer to create a simple ESP32 Arduino sketch along with a script for Google Sheets. The purpose of the following system will be to determine when an ESP32 starts running and when it stops running and to determine how long it was running for and how long it was not running for. Create an Arduino sketch running on an ESP32. The sketch will send a message to a Google Sheet every ten seconds. Create a Google Sheet to receive the messages and record the time when messages are received. The first message after a period of not receiving any messages will be a start time. When new messages are received, the time elapsed between the start time and the current message will be calculated and indic...
I'm seeking a skilled professional to assist with integrating my Guition ESP32-S3-4848S040 board into SquareLine Studio for the Arduino IDE. The ultimate goal is to produce a complete set of files that adhere to the specified requirements. Here are links to descriptions of a board, specifically mine is ESP32-S3, ST7701, GT911, and requires the CH340 driver: General description: Additional information about the board: I am looking for a fully functional set of files for SquareLine Studio that meet the requirements outlined below: Ideal Skills and Experience: - Proficient in C/C++ programming - Experienced in
I'm looking for a skilled freelancer to help me with an Arduino WiFi project aimed at home automation. The main focus of this project is to control my window vent cover using an Arduino WiFi module and a linear actuator. Key Requirements: - Use of Arduino WiFi module to facilitate control over vent cover. - Ensuring the control mechanism allows for vent to be opened and closed. Ideal Skills and Experience: - Proficiency in Arduino R4 UNO wifi installation, programming and electronics. - Prior experience with home automation linear actuator projects will be a significant advantage. - Ability to deliver a reliable and user-friendly control system. - Ability to teach what was required both programmatically and electronically to achieve a functional system
I am seeking a highly skilled ...extensive hardware and software experience in managing 230V AC and DC current power switching. The project involves controlling heating elements through an Arduino ESP32 platform. Key Project Features: - Control: The system will primarily control heating elements. - Efficiency: A major focus will be on energy efficiency, so expertise in developing energy-efficient systems is crucial. - Remote Management: The system is to be controlled via a web interface, so experience in web-based control systems is a plus. Ideal Skills: - Proficiency in hardware and software development, particularly in power switching. - Extensive experience with Arduino ESP32. - Strong background in developing energy-efficient systems. - Previous work with web interface...
I'm seeking a skilled professional to assist with integrating my Guition ESP32-S3-4848S040 board into SquareLine Studio for the Arduino IDE. The ultimate goal is to produce a complete set of files that adhere to the specified requirements. Here are links to descriptions of a board, specifically mine is ESP32-S3, ST7701, GT911, and requires the CH340 driver: General description: Additional information about the board: I am looking for a fully functional set of files for SquareLine Studio that meet the requirements outlined below: Ideal Skills and Experience: - Proficient in C/C++ programming - Experienced in
I'm seeking a seasoned software engineer with experience in ASCOM driver development and Arduino interfacing to create a user-friendly interface for controlling my observatory dome. Key Responsibilities: - Develop a simple yet effective User Interface (UI) as part of the ASCOM driver. The UI should be intuitive and easy to navigate. - The UI will display the dome's position, connected via USB from a multiturn encoder. Although the encoder can handle 50 turns, it only uses 11 for the dome's 360° geometry, thus, the UI should allow for editing these 11 turns to match the dome's geometry. - Create a control box within the UI where I can input a desired position, alongside 4 default settings for North, East, South, and West. It is crucial to allow customization ...
I'm looking for an experienced software developer to create a program for a handheld controller based on an Arduino Mega 2560. Key Features: - Data Input and Display: The controller will primarily be used for inputting and displaying textual data. The ideal candidate should have: - Proven experience with Arduino programming. - A strong background in software development for handheld devices. - Experience in working with LCDs and 4x5 Keyboards. - Ability to create intuitive and user-friendly interfaces. The project is focused on creating a robust, functional, and efficient piece of software that will enhance the usability of the handheld controller. If you have the required skills and experience, I look forward to your bid.
...with Arduino to create a stepper driver for controlling a lifting stage. This driver should accommodate both slow and fast advancements. Interface & Control: - The driver will be controlled via physical buttons. Safety & Features: - It must include an emergency stop feature. - Position feedback is necessary. - There should be an ability to adjust speed. - The system should allow for both advance and retract rates. - Finally, it needs preset routines to fully retract or fully advance. Positioning Feedback System: - I'm open to suggestions for the positioning feedback system, but I believe an open-loop control should suffice. Limit switches could be a simple solution, but I'm open to more sophisticated options like encoders if warranted. Ideal Skills: - Exte...
I need a freelancer experienced in Machine Learning, Arduino IDE, and TensorFlow Lite for Microcontrollers (TinyML) to convert and deploy an existing ML model onto an Arduino ESP32. The model processes Gyroscope and Accelerometer data to detect Freezing of Gait (FoG) in Parkinson's Disease patients. Key Tasks: - Convert the provided Python ML Code into C/C++ compatible with Arduino IDE - Implement data processing and model inference logic on the microcontroller - Use TensorFlow Lite for Microcontrollers to convert and deploy the ML model Ideal Skills: - Proficient in Python and C/C++ - Extensive experience with Arduino IDE and Arduino ESP32 - Knowledgeable in TensorFlow Lite for Microcontrollers - Understanding of Machine Learning concepts and algo...
I need to connect my prepaid metering solution with our custom-built, Laravel-based web application via ESP8266 WiFi modules. The current process involves manually inputting a 25-digit coupon code into a recharge unit, which decodes the code for the meter. The goal is to streamline this operation by directly sending the codes from our web app to the meter, thereby eliminating the need for the recharge unit. Key Requirements: - Proficient understanding of Laravel and custom web applications. - Experience in integrating ESP8266 WiFi modules. - Ability to create a clear, step-by-step plan for this integration. - Previous work with prepaid metering systems is a plus.
Looking for Arduino FastLed library expert to complete board code for 120 Leds stripe (ws2812B) clock Board is NodeMCU ESP8266 , getting ntp local time. Mandatory : smooth led transitions (fading chase sequantial for seconds) Hour shift between minutes aurora / breathing effects on 12 and 24 clock time Day/night automatic (based on hour time) brighness dimmer level any other improvment will be evaluate.
I have a arduino uno and 2 gy-521 sensors I want to use both at the same time and read acceleration values for drawing chart it should be read acceleration values for 30 seconds then draw 2 chart like sensor 1 and 2. I also need arduino schema.
