Hi I am looking for an export in FEMM open source software or alternatively Ansys The project will be a simulation for a axial flux motor.
I'm looking for an expert in ANSYS Fluent to simulate the burning of hydrogen in a cylindrical swirling burner. The purpose of this project is to observe the breakdown of the vortex and collect various data outputs. Key Requirements: - Perform detailed simulation of hydrogen flames in a cylindrical swirling burner. - Provide data outputs including temperature distribution, velocity profile and pressure distribution. - Visualize and demonstrate how the vortex breaks down. Ideal Skills & Experience: - Proficiency in ANSYS Fluent. - Experience with combustion simulations. - Understanding of vortex dynamics in swirling burners.
I'm seeking an engineer to assist in selecting an appropriate HVAC system for a residential property and performing the necessary duct calculations. The system needs to effectively provide heating, cooling, and ventilation. Ideal Skills: - Extensive knowledge in HVAC equipment - Proficiency in load and duct calculations - Experience in residential HVAC system design - Knowledgeable of new technology available in HVAC design - Strong communication skills for clear explanations
...shared for reference. - One 11-12 page engineering portfolio that describes all elements and features of the car. Other Requirements: - A Computational Fluid Dynamics (CFD) analysis of one F1 car. STL files will be provided. Using Ansys discovery and this link: - A 3D modelled pit display that is highly detailed and includes interactive elements, similar to an F1 standard. - The pit display should incorporate interactive models, lighting effects, and an enterprise-like sample jersey design and cap. Some new features also need to be added. Ideal Skills: - Expertise in FEA and CFD analysis, particularly in the context of F1 materials and cars. - Proficiency in creating detailed, interactive 3D models. - Strong portfolio development skills. - Ability
I'm looking for an expert who can design a custom wind tunnel structure and its components, with a focus on achieving a high accuracy of airflow measurements. The project will also involve running a CFD simulation for a low turbulence rate. Key aspects of the project include: - Designing the tunnel structure, test section, and nozzles and diffusers. - Ensuring the designs are optimised for high measurement accuracy. - Using metal as the primary material for construction. Ideal skills and experience for the job: - Expertise in wind tunnel design. - Proficient in CFD simulation. - Experience with designing for high accuracy airflow measurements. - Metalworking knowledge. Please provide examples of previous work that demonstrate your capabilities in these areas.
Design of Formula 1 Car and Computational Fluid Dynamics of the Car for Drag and Downforce.
I'm seeking an expert in fluid dynamics and ANSYS simulation to design a convergent conical nozzle and demonstrate, through simulation, that the flow reaches supersonic speeds at the nozzle exit. Key Requirements: - Simulate the flow through a conical nozzle, showing that it reaches supersonic speeds at the exit. - Provide detailed designs of the nozzle, specifically its dimensions and shape. - Use a given inlet pressure, inlet, throat and exit diameter. - Use an angle of 15 degrees for the divergent part of the nozzle. - The purpose of the CAD is to 3D print it later on. - STP file and Ansys file are required Ideal Skills: - Proficiency in ANSYS and fluid dynamics. - Experience with nozzle design. - Strong understanding of supersonic flow characteristics. Ple...
I need a professional with extensive experience in ANSYS who can perform a static structural analysis for me using composite materials. Ideal Skills: - Proficiency in ANSYS software - Extensive knowledge of static structural analysis - Experience working with composite materials - Strong understanding of engineering principles - Ability to interpret complex data Please provide your bid if you are capable of delivering quality work in a timely manner.
I'm seeking a skilled SEO writer to enhance the local search visibility of my duct cleaning service, Everest Duct Cleaning. Targeting major cities in the Greater Toronto Area (GTA) including Toronto, Mississauga, Oakville, Hamilton, and Burlington, my goal is to climb the search engine ladder as high as possible. Key Responsibilities: - Creation of SEO-focused content aimed at boosting our Google Business page ranking and overall website visibility. - Development of engaging blog posts, informative service pages, and compelling case studies. Your expertise should ideally include: - Proven experience in SEO content writing, preferably for local businesses. - Strong understanding of keyword optimization and crafting engaging meta descriptions. - Ability to create diverse...
I'm seeking an expert in Computational Fluid Dynamics (CFD) to analyze temperature distribution within my datacenter, with a focus on improving airflow management. The ideal candidate will prioritize the following areas of the datacenter: - Server racks: Understanding the temperature distribution around these critical components is paramount. - Raised floors: As a common area for cooling and airflow, this space needs thorough examination. - Cooling units: These are the heart of our temperature control and require detailed analysis to optimize their performance. The goal of this project is to enhance our current airflow management. Experience with datacenter environments and CFD software is highly desirable. Please include relevant samples of your previous work in your ...
I need a specialist to simulate coal-biomass cofiring combustion with ANSYS. The focus will be on HT-EFB as biomass, across various mixing ratios. Key Requirements: - Execute combustion simulation via ANSYS. - Assess these mixing ratios: * 20% coal - 80% biomass * 10% biomass - 90% coal * 30% biomass - 70% coal * 40% biomass - 60% coal - Deliverables should include: * Temperature contour * Mole fraction contour of products * Particle velocity profile/contour Ideal Skills and Experience: - Mastery of ANSYS for combustion simulations - Previous coal-biomass cofiring studies - Clear interpretation and presentation of simulation results The simulation's purpose is to optimize mixing ratios. The coal and biomass properties will need to include proximate and ultima...
I'm looking for a professional who can conduct a combustion simulation for coal-biomass cofiring using ANSYS. The study involves using HT-EFB as the biomass and analyzing various mixing ratios. Key Requirements: - Conduct a combustion simulation using ANSYS. - Analyze different mixing ratios: * 20% coal - 80% biomass * 10% biomass - 90% coal * 30% biomass - 70% coal * 40% biomass - 60% coal - Provide outputs including: * Temperature contour * Mole fraction contour of products * Particle velocity profile/contour Ideal Skills and Experience: - Proficiency in using ANSYS for combustion simulation - Prior experience in coal-biomass cofiring studies - Ability to interpret and present simulation outputs clearly
I'm looking for a professional with expertise in CFD and aerodynamics to evaluate the aerodynamic drag of an aircraft’s stabilizer (and elevator). - Task Requirements: - Create simple, very similar 3D models with zero straight wind and zero deflection at 70 m/s. - Each model will require about 10 minutes for 3D modelling and about 30 minutes for CFD analysis. - Produce a table of results that includes the 3D model, Drag (in N), CD, and a picture of the pressure and velocity flow around the model. - Skills Required: - Engineering - Finite Element Analysis - 3D Modelling - Computational Fluid Dynamics - Ansys
...Computational Fluid Dynamics (CFD) using ANSYS software to conduct a detailed analysis on an Ahmed Body. Your analysis will focus on: - Aerodynamic drag: I am particularly interested in understanding how the shape of the Ahmed Body influences its resistance against the flow of air. - Mixed flow conditions: The simulation should account for a mixed flow scenario, incorporating both laminar and turbulent flow characteristics. Expected deliverables from the project include: - 2D plots: Visual representations of the flow patterns and forces acting on the Ahmed Body. - Numerical data tables: Detailed, quantitative results of the CFD simulation. Ideal candidates for this project should have: - Proven experience in conducting CFD analyses on similar bodies. - Pro...
I'm seeking a skilled 3D CAD designer to create detailed designs for a mechanical part, as well as a commercial building. The job will involve: - Designing a mechanical part in 3D CAD. - Creating 3D CAD designs for the interior layout and structural details of a commercial building. Plumbing Risers above grade including gas and vent pipe. Showing elevations and duct work beside. Ideal candidates should have: - Extensive experience in 3D CAD design, particularly for mechanical parts. - A portfolio showcasing previous work in commercial architectural design. - A keen eye for detail and a strong understanding of structural elements. Please provide examples of similar projects you have completed in your proposal.
I'm in need of a professional skilled in creating duct work drawings for a commercial building's HVAC system based on basic existing blueprints. Ideal skills and experience for the job include: - Proficiency in HVAC system design - Experience with duct work drawings - Ability to work with basic blueprints - Knowledge of commercial building standards - CAD software expertise
I need a PCB model evaluated for mechanical shock loads using Ansys Sherlock. The primary goal is to predict potential failure points under conditions typical for industrial robotics. Ideal Candidates Should: - Have a strong background in PCB design and analysis. - Be proficient in using Ansys Sherlock for mechanical shock evaluation. - Possess experience with industrial robotics environment modeling. - We can provide an Altium export for the PCB
I'm seeking a professional with expertise in CDF and FEA testing, particularly for performance analysis and fracture mechanics. The primary tool for this evaluation will be ANSYS. Key responsibilities: - Conducting comprehensive performance analysis using CDF and FEA testing. - Utilizing fracture mechanics for failure prediction. - Employing ANSYS software for all testing and analysis. Ideal skills and experience: - Proficient in using ANSYS for CDF and FEA testing. - Solid background in performance analysis and fracture mechanics. - Previous experience in conducting similar testing projects.
I'm seeking an experienced ANSYS professional to conduct fluid and thermal simulations for performance evaluation under dynamic and thermal conditions. Ideal Skills and Experience: - Proficient in ANSYS, particularly in fluid dynamics and thermal analysis modules. - Strong background in performance evaluation techniques. - Experience working on dynamic and thermal condition simulations. - Ability to interpret and present simulation results clearly. - Expertise in identifying potential design optimizations based on simulation outcomes.
I'm looking for an experienced professional to assist in the design of an F1 car for the F1 in Schools competition in UAE. Currently, the project is in the conceptual design stage. Key Requirements: - Creation with the car's design - Expertise in aerodynamics, materials selection, and manufacturing processes -cfd analysis with drag coefficient below 0.1 Ideal Skills: - F1 in schools car design experience - Proficiency in aerodynamics and material science - Understanding of manufacturing processes If you have a strong background in engineering and design, particularly in the context of competitive racing, I would love to hear from you.
I'm in need of a professional who can run some CFD analyses on a wave energy converter using a 3D step file that I will provide. Key metrics to be analyzed: - Power output at 4m/s and 2m/s wave speed - Hydrodynamic forces The analysis should be conducted under normal water conditions, with no need for tests at varying wave heights or water temperatures. The ideal candidate for this project: - Should be highly proficient in CFD simulations and FSI analysis - Have experience working with wave energy converters - Be able to deliver a moderate level of detail in the analysis Your expertise will help in understanding how this device interacts with the water and its power generation capabilities. Looking forward to your bids.
...assistance with a project involving 5 shape memory wires of 0.5mm diameter. The objective is to create a simulation in ANSYS where a PDMS matrix is placed around the wire. The wires must be stretched to their maximum residual strain of 4 percent and then heated to recover that strain. The goal is to achieve a bending motion instead of a linear recovery, with an experimental analysis achieving a bend angle of 30 degrees. Key Tasks: - Model 5 shape memory wires with a 0.5mm diameter and a PDMS matrix in ANSYS - Stretch the wires to a maximum residual strain of 4 percent - Heat the wires to recover the strain - Achieve a bending motion during recovery Ideal Skills: - Proficiency in ANSYS, specifically in static structural simulations - Understanding of shape memory a...
I'm looking for a Dynamo expert to create a custom tool palette for ductwork annotation tags in Revit. Specific Tasks: - Create a tool palette with specific duct tags that I've already created - Ensure the tool palette is user-friendly and efficient for annotating ductwork Ideal Skills and Experience: - Proficient in Revit and Dynamo - Experience in creating custom tool palettes - Attention to detail to ensure all necessary tags are included
I'm seeking assistance with a thermal analysis of a 3D model in ANSYS, specifically focusing on heat distribution. I have model but it needs a little bit improvement. I have file in .stp format. I need basically a diffusion/dispersion analysis and checking an altering the system if it achieve the requirements or needs further modification. Your tasks will involve: - Running simulations to assess the mixing of hot water with cold water inside a diffuser tank. There are two diffusers top and bottom inside a tank. The tank is insulated so that the process is adiabatic. The water comes to tanks from top diffuser and goes out from the bottom diffuser. - Providing insights and recommendations based on the simulation results. - Assisting with the optimization of the project based ...
I'm seeking an expert in ANSYS fluid dynamics simulation for a continuous casting process who can model the behavior of a liquid under varying temperature conditions and solidification processes. The primary purpose of this simulation is for academic research, so a deep understanding of the relevant physical principles and the ability to deliver precise, detailed results is crucial. Key Requirements: - Proficiency in fluid dynamics simulation software - Extensive knowledge of liquid properties, particularly viscosity, density and solidification processes - Experience in undertaking simulations for academic research Ideal Skills: - Strong analytical and problem-solving skills - Excellent attention to detail - Ability to present complex data in an understandable way
I'm seeking an expert in Ansys who can assist with parameter optimization and data analysis. The primary focus will be on process parameters. Ideal skills: - Proficiency in Ansys for simulation and optimization - Experience in parameter optimization - Strong data analysis skills Key responsibilities: - Conduct simulations and optimize parameters - Analyze data to derive meaningful insights
Estoy haciendo una simulación de un plato perforado tengo todo realizado, la geometría, el mallado y el setup pero en un momento de la simulación en la gráfica de residuales se eleva mucho, tampoco tengo un computador para que se haga el proyecto rápido. I am doing a simulation of a perforated plate. I have everything done, the geometry, the meshing and the setup, but at one point in the simulation the residual graph rises a lot. I also do not have a computer to do the project quickly.
Estoy haciendo una simulación de un plato perforado tengo todo realizado, la geometría, el mallado y el setup pero en un momento de la simulación en la gráfica de residuales se eleva mucho, tampoco tengo un computador para que se haga el proyecto rápido
I am looking for an experienced professional to perform a simulation of a 3D axial flow fan turbomachinery r...such as: Contour plots Blade loading distribution Efficiency and performance graphs Any other relevant insights Deliverables: 1. A detailed report including operating curves and analysis. 2. Visualization outputs (e.g., contours, blade loading, etc.). 3. Simulation files for future reference. Preferred Skills: Expertise in turbomachinery simulations Proficiency in CFD tools such as ANSYS CFX, Fluent, or similar software Knowledge of axial flow fan design and analysis If you are confident in your skills and have relevant experience in similar projects, please provide your proposal with a timeline and cost estimate. I look forward to collab...
I'm seeking an expert in GMSH for meshing a 3D model. The mesh should consist primarily of hexahedral elements, as it will be used for Computational Fluid Dynamics (CFD) simulations. Key Requirements: - Proficient in using GMSH software - Extensive experience in creating hexahedral meshes - Familiarity with Computational Fluid Dynamics (CFD) requirements - Ability to deliver high-quality, precise meshes for complex simulations. Please provide examples of similar projects you have successfully completed in the past.
I'm seeking a professional with extensive experience in thermal simulations. The project revolves around a PCB board housed in a plastic enclosure. Key tasks include: - Conducting a detailed thermal simulation to identify potential hotspots on the PCB and within the enclosure. - Providing recommendations to improve cooling efficiency. - Ensuring the selected ma...enclosure. Key tasks include: - Conducting a detailed thermal simulation to identify potential hotspots on the PCB and within the enclosure. - Providing recommendations to improve cooling efficiency. - Ensuring the selected materials can safely withstand the thermal stresses encountered during operation. Ideal candidates will have expertise in using thermal simulation software, with a preference for ANSYS, SolidWo...
Scope of Work: Payment Solution for CFD Platform in Africa We are seeking quotes from payment specialists to design, build, and implement a seamless payment solution for a CFD trading platform targeting the following African countries: Nigeria, Ghana, Uganda, Cameroon, and Zambia. The system should enable real-time deposits and withdrawals for clients, routing funds to and from international bank accounts. Scope of Work 1. Payment Gateway Integration: • Integrate localized payment methods (cards, bank transfers, and mobile money) for each target country using PSPs • Ensure real-time processing of deposits and withdrawals. 2. Currency Conversion & Settlement: • Implement a currency conversion mechanism to support deposits in local currencies and settl...
I'm seeking a skilled CFD analyst to evaluate three cambered airfoils at two specific Reynolds Numbers: 166,000 and 638,000. The analysis must be conducted using ANSYS Fluent. Key Requirements: - Proficient with ANSYS Fluent - Experienced in CFD analysis of cambered airfoils - Able to interpret and present results clearly The successful freelancer will have the opportunity to work on a challenging project with potential for future work.
I'm seeking an HVAC design professional who can help me install a central air system in my single-family home. The primary goal of this project is to ensure a cost-effective installation without compromising on quality and performance. Ideal skills and experience for the job: - In-depth knowledge of central air systems - Experience with cost-effective HVAC installations - Ab...with budget constraints - Familiarity with various HVAC brands and their cost-effectiveness - Excellent problem-solving skills to ensure optimal design within budget constraints - Ability to provide package that will be approved by Yavapai County Home under reconstruction has a very odd six sided shape and a job meeting prior to engineering would be required. Owner has a specific pathway for duct...
I need a professional who is highly skilled in ANSYS software to help me model 5 concrete, rectangular beams under cyclic loading. I have precise dimensions for the beams. The ideal freelancer for this project should have: - Extensive experience with ANSYS software - Strong background in engineering, specifically in beam modelling under cyclic loading - Ability to understand and work with precise specifications If you meet these criteria and can deliver high-quality models, please get in touch. Thank you!
I'm seeking a mechanical design expert to help develop a diaphragm pump intended for fluid handling. The project requires: - Designing the pump using any proficient CAD software. - Selecting materials that are cost-effective yet durable and suitable for the application. - Using simulations (CFD/FEA) to optimize the pump's performance and durability. - Preparing detailed engineering drawings and a comprehensive Bill of Materials (BOM). - Offering guidance for the prototyping and testing phases. Ideal candidate should have: - Extensive experience in mechanical design and diaphragm pump development. - Proficiency in CAD software. - Strong understanding of cost-effective material selection. - Experience with simulations for mechanical design. - Ability to prepare detailed en...
I need a CFD simulation expert to model a battery pack using the MSMD model, focusing specifically on thermal management through a phase change material cooling system. Key Requirements: - CFD Simulation experience, particularly with battery packs. - Proficiency with the MSMD model. - Understanding of thermal management strategies. - Experience with designing cooling systems using heat pipes. - Knowledge of phase change materials and their application in cooling systems. Your task will be to assess the cooling system's design and optimize it for effective thermal management.
I'm seeking a skilled professional with experience in ABAQUS Simulia to simulate shoulder movement using two types of prosthetics - reverse and custom made. Key Aspects: - The primary focus of the simulation will be the range of motion of the shoulder with each type of prosthetic. - I have...range of motion of the shoulder with each type of prosthetic. - I have existing 3D models for the prosthetics, so no assistance will be needed in that regard. Deliverables: - The simulation report should include visual animations and numerical data. - Graphs and charts are not necessary. - video of the process Ideal candidates for this project should have: - Proficiency in ABAQUS Simulia or Ansys. - Experience with biomechanical simulations. - Ability to present data in a clear and acc...
... Design Inputs for Support System: Specific structural inputs tailored to Hilti’s product selection for pipe support systems. Requirements Proven expertise in structural analysis of piping systems. Experience with chilled water systems and pipe supports. Familiarity with industry standards (e.g., ASME, local building codes). Proficiency in relevant tools : (CAESAR II, ANSYS, SAP2000). Strong ability to present technical findings in tables, graphs, and diagrams. Proposal Submission Include the following in your proposal: Summary of qualifications and relevant projects. Approach to the analysis and report preparation. Estimated timeline for completion. Proposed fee for the project. Deadline for Submission Submit all proposals v...
I need Electric and Magnetic field plotting using ANSYS methodology. I will provide the following details 1. Transmission tower dimensions 2. Operating voltage value 3. Different current scenarios. I need a 2D cross section of the E-Field and H-Field mapping from source till +100 and -100 metres distance. An example of this is provided in the image attached below.
1. Overview This design is for a control-focused padel racket targeted at beginners and defensive players. The racket must comply with official padel regulations and feature unique design elements for performance and aesthetics. The project includes CFD (Computational Fluid Dynamics), FEA (Finite Element Analysis), and vibration analysis to simulate real-life performance, structural integrity, and ball interaction during gameplay. 2. Dimensions The overall length of the racket is 455 mm (45.5 cm). The head diameter is 255 mm (25.5 cm), with a thickness of 38 mm (1.5 inches). The handle measures 120 mm (12 cm) in length and 30 mm (3 cm) in width. The throat width, where the handle transitions to the head, is 60 mm. 3. Material Requirements The frame material is high-density carbon ...
...designs should be versatile, but maintain a high radiant level of luxury elegance and sophistication. Key Task: *Designing and engineering luxury furniture pieces *Creation and integrating mechanical, mechanism, components, and functionality into each design *3D/4D renderings (inner and outer layered design) *2D designs *CAD ready designs *Sewing/stitching pattern and designs *Structural analysis (ANsys) *BOM and BOL list *Manufacture instructions/guide Key requirements: *Versatility with hands-on expertise and a thorough understanding of furniture design and engineering, with a keen sense for current trends and techniques on a broad variety of luxury furniture production. *Experience in designing upholstered and solid wood (carvings) furniture *Ability to visualize with a keen...
Note: Please read before bidding, I have mentioned all the details in the PDF so increasing the bidding price later will not be accepted. Check the PDF attached for a detailed description. Objective: Design a pasteurization room that u...carefully placed nozzles to avoid hot spots and ensure uniform temperature distribution. - Overhead water spray system for rapid cooling. Deliverables: - 3D Model & Layout of the room along with nozzles placed. - Nozzle/Diffuser Placement & Specifications. - CFD Analysis and Iterations to confirm uniform heating. - Recommendation for sensor locations. - Heating Time Estimates (time required to reach pasteurization temperature). Required Expertise: Mechanical or Chemical Engineer with expertise in steam-based systems, thermal processes, a...
...looking for an expert in Computational Fluid Dynamics (CFD) to analyze an oscillating wave surge converter. This project will focus on the structural integrity (using Fluid-Structure Interaction or FSI), the hydrodynamic performance and the power output of the converter under different wave speeds (low, medium and high). Key project requirements: - Conducting a detailed CFD analysis using Siemens Star CCM+ Marine or Flow3d - Evaluating the structural integrity of the converter under different conditions - Analyzing the hydrodynamic performance of the converter - Measuring the power output with varying wave speeds - Presenting findings in a clear and comprehensive manner Ideal candidates for this project should have: - Extensive experience with CFD and FSI - Profic...
I need assistance with validating a research paper using Ansys. I am currently pursuing my Mtech and have a mid-project review coming up. This task is straightforward and I just need some suitable results to present at my review. The analysis will focus on: - Fluid dynamics , Heat transfer , Phase Change The material under analysis will be: - PV modules, specifically: - Polycrystalline PV modules - PCM ( Phase Change Material) Skills and experience that would be beneficial for this project include: - Proficient in using ANSYS software - Understanding of fluid dynamics , CFD and Heat transfer - Ability to deliver reliable results in a timely manner.
