发布竞赛

Creating a PCB for esp8266 12F card

状态: Closed
奖金: €10
参赛作品已收到: 3
获胜者: TokaElkomy93

Winner

竞赛简介

Hello,
I am looking for someone capable of modeling the plan for PCBs for me
I will need the files so I can give them to PCB manufacturing services
The goal is to manage an ESP8266 12F chip via this PCB

Must therefore :
- That for inputs I have a 1mm hole so that I can solder cables there
- That I can power the module via two 1mm holes (top right) so I also need to make the connection to the card
- In front of the 22 holes for the esp card, I have connections to other holes to be able to add components later.
- Add 3 1mm holes at the bottom right, the first of which (signal) is connected to GPIO2, then connect the other two to +3v and GND
- Connect the RST to GPIO16
- It is also necessary on the right, to make two 1mm holes spaced 10mm apart and connected to the signal and to +3v (so that I can add a resistance)
- Everything must measure either 25mm* 35mm
- You also need to add holes in the 4 corners to accommodate screws

Thanks