PCB Design & Prototype for 2.4" Display

Hi, I have experience in designing Circuits and can complete your project in the following steps: 1- Designing schematic and PCBA 2- Ordering the PCBA and getting boards manufactured. 3- Writing firmware for the PCBA to make sure everything works as expected. If you wish we can discuss in chat. Thank you.

Being an Electrical/Electronics Engineer with over 8 years of experience in PCB designing, I firmly believe that I have the skill set you are seeking. Throughout my career, I have become fluent in tools like Eagle, Altium, KiCAD, and EasyEDA, which would be crucial for creating a custom PCB for your 2.4-inch display module. My competency also extends to reverse-engineering and understanding driver ICs – skills that are indubitably essential for this project given the lack of precise specifications. Moreover, my familiarity with ESP32 is a notable asset. I have hands-on experience with data processing and designing for power management; two aspects indispensable for this project. Speaking of efficiency, I have successfully designed numerous compact boards with cost-effectiveness in mind without compromising functionality. Lastly, the landscape orientation and non-touch requirement you emphasize necessitate not only engineering expertise but also an attention to detail and a customer-centric mindset to ensure user-friendly integration. These are attributes I bring to the table. Thank you for considering my candidacy; it would be an honor to contribute to the success of your project.

I am an experienced PCB designer with strong reverse-engineering skills, proficient in display modules and driver ICs like the ILI9340. I can design and prototype a compact, cost-efficient PCB for your 2.4-inch display module with an SPI interface, ensuring seamless compatibility with the ESP32. The PCB will include backlight control, a 3.3V operating voltage, and a power connector for external supply, tailored for consumer electronics. Let’s discuss further to create a user-friendly solution that meets your needs. Best regards,

Hi there, I’ve reviewed your project description, and I’m confident that my expertise in PCB design and reverse engineering makes me a strong fit for your requirements. I have extensive experience with display modules, driver ICs like the ILI9340, and SPI-based interfaces. I can design a compact, cost-efficient PCB tailored for your 2.4-inch display module, ensuring compatibility with the ESP32 and incorporating features like backlight control and external power supply connections. Let me know if you'd like to discuss the project further—I’m ready to help bring your design to life. Best regards, Samuel Tshibangu

As a seasoned robotics and AI Engineer adept at innovating solutions for complex problems, I am the perfect fit for your PCB design and reverse-engineering project. My proficiency in designing, programming, and prototyping robotic systems will be invaluable as I navigate the unique challenges of your 2.4" display module. I have extensive experience with both SPI and parallel interfaces, having previously worked with similar driver ICs like the ILI9340. My past research work on power management and data processing aligns perfectly with the requirements to ensure the devised PCB design enhances the display module's functionality efficiently. Importantly, my knowledge of ESP32 will guarantee compatibility while allowing me to create an appealing user interface given its landscape orientation that's non-touch. Collins is about innovative problem-solving at cost-efficiency without compromising skill quality! In a world with constant technological advances and limited specifications like yours, my reverse-engineering skills provide a valuable edge. Furthermore, my meticulous approach ensures all bases are covered - from circuitry for backlight control to external power supply connectivity. So let me bring my well-acquired technicalities in robotics algorithm design and implementation to your project and exceed your expectations!

Hi, Greetings..! I am interested to work on your project. Please discuss project details. Looking forward to work with you. Thnak you shivkant

Hello there.. As a professional circuit and PCB designer, I have Checked all your Project Details very well.. I can extensive capable for your display replica reverse engineering PCB design, Even I understand the importance. I would love to discuss about your project, I want bring your ideas to life. Thank you for considering my proposal. I look forward to the possibility. Best wishes for your project.. thank you

Having worked extensively in the domain of embedded systems, I confidently assure you that my skills and experience make me an ideal choice for your PCB design project. I have a diverse range of experiences with developing firmware and hardware solutions for various industries, including a successful IoT product developed using ESP32. My ability to write optimized, scalable firmware (in languages like Embedded C, C++, Python, etc.) aligns well with what you're seeking for this project. In terms of hardware design and integration, I am proficient in using platforms such as Arduino and Raspberry Pi to integrate sensors and modules for real-time data collection and system control. This includes working with protocols such as UART, I2C, SPI, and Ethernet - skills that would be directly transferable to accomplishing tasks like reverse-engineering a display module and ensuring compatibility with the ESP32. Given the information-proscription for this specific project, it will require someone who's versatile and adept at debugging and troubleshooting complex embedded systems. My experience in dealing with intricate systems ensures my adaptability in such scenarios. Above all, my dedication to optimization and reliability is what sets me apart - your PCB will not only be fully functional but cost-efficient and compact as per your stipulation. So let me put together a phenomenal solution for your 2.4" Display.

Hi I have more than 9 years experienced in circuit deisgn and development in my past I have designed lot if board for company i can design best way under emimec

I am an experienced embedded systems engineer with a strong background in PCB design, reverse engineering, and firmware development. I have worked extensively with display modules and have a proven track record in designing and prototyping custom PCBs for various applications. For your project, I will reverse-engineer the 2.4-inch display module to identify the pinout, determine the interface, and understand the driver IC's functionality. I will then design a PCB that controls the display module, including necessary circuitry for backlight control, ensuring compatibility with the ESP32. The PCB will be designed to operate at 3.3V and will include a power connector for an external power supply. My approach will emphasize compactness, cost-efficiency, and user-friendly integration for consumer electronics. I will ensure that the PCB accommodates a landscape orientation for the display and includes additional features for non-touch functionality. The PCB will connect to the ESP32 using an SPI interface, ensuring seamless communication and data processing. I am proficient in using tools such as Altium, Keil uVision, STM32 Cube MX, and Arduino IDE, which will be essential for this project. My daily availability is 8-12 hours, depending on the role and responsibility, ensuring that I can dedicate sufficient time to deliver high-quality results.

I have designed successfully similar projects with 1.2" OLED display interface with ESP32 controller to display the power monitor measurements. I have good knowledge on this I could take up this project immediately. I have 8+ experience in electronic hardware design and development field.

am excited to submit my proposal for your custom PCB design and prototyping project. With extensive experience in PCB design, IoT development, and hardware reverse-engineering, I am confident in delivering a solution tailored to your needs. Key Expertise Reverse-Engineering: Proven ability to analyze display modules, identify pinouts, interface types, and IC functionalities, including the ILI9340 driver IC. PCB Design: Specialized in designing compact PCBs for display modules (SPI/Parallel) and ensuring ESP32 compatibility. ESP32 Integration: In-depth knowledge of SPI communication, power management, and data processing. Prototyping: Delivering functional, rigorously tested prototypes optimized for consumer electronics. Proposed Approach Reverse-Engineering: Analyze the 16-pin display module to verify pinout and interface, ensuring compatibility with the ESP32. Custom PCB Design: Create a cost-efficient PCB with backlight control, 3.3V power supply, and external power connector. Prototyping and Testing: Develop and test the prototype to validate performance and ensure user-friendly integration. Deliverables Reverse-engineered schematic and pinout documentation. PCB design files (Gerber, BOM, assembly drawings). Fully functional prototype for testing. Why Choose Me? With a proven track record, attention to detail, and collaborative communication, I ensure a smooth process and high-quality outcomes. I look forward to helping you achieve your vision.

Hi, I'm experienced embedded hardware engineer. Experienced in displays and microcontrollers (this is also my daily job) including ESP32. I've done lots of repairs and reverse-engineering in a past. Now focusing on design, but my previous experience helps me to do it quicker and better. I understand you provide the module to be reverse-engineered? The project would be done in 14 days from the day I receive the module from you. Please do not hesitate to contact me if you have any questions.

With over 10 years of experience in embedded systems, including my tenure at Microchip Inc., I have designed 30+ industrial and consumer products, many involving displays and ESP32 integration. My expertise includes PCB design, prototyping, and reverse engineering display modules like those with ILI9340 and similar driver ICs. I’ve worked extensively with SPI interfaces, backlight control circuitry, and compact, cost-efficient designs for consumer electronics, including collaborations with Chinese vendors on custom displays. I am confident in delivering a robust, user-friendly PCB design for your 2.4-inch display module with full ESP32 compatibility and additional features as outlined.