Lawn mowers mechanical engineering projectεργασίες

...encountered firmware problems with our current CANBUS ICL-stepper motors and have decided to buy another brand. The current motors lacks SYNC messages and has a limit on the lowest possible speed that makes then unsuitable for robotics, my programmer says. Or we are doing it wrong as we can't get the motors perfectly synced. I need to look for these new motors, but im not an electronics guy, but a mechanical design engineer. And as my programmer is busy with other, i need your help to figure out which motors we should use instead. I p#Et#er will give you motor suggestions, and you will look at the specs and help me to write questions to the motor maker if the manual is lacking any information. My robot arm programmer will also assist us. We are on a VERY tight budget a...

...generative AI tools that attempt to create content autonomously, DreamScribe is a unique writing assistant that uses advanced, data-driven metrics to guide authors through the creative process, ensuring their vision is realized authentically and effectively. Our mission is to support and elevate the art of writing, leveraging technology as a partner rather than a substitute. We are reverse engineering genre success metrics and implementing it into our complex system to dynamically guide users, no matter their skill level, to a highly evolved book – the same way a writing coach would guide you and make revisions, except instantly and at a fraction of the cost. From timelines and chapter outlines to arcs and getting the story “out of” the users with smart dyna...

I'm seeking a skilled structural engineer to prepare a comprehensive report for a new residential building. The main focus of the report should be on the load-bearing capacity of the structure. Key requirements: - Analyze the load-bearing capacity of the new construction - Provide clear and concise...residential building. The main focus of the report should be on the load-bearing capacity of the structure. Key requirements: - Analyze the load-bearing capacity of the new construction - Provide clear and concise recommendations based on the analysis - Ensure the report is suitable for submission to local building authorities. Ideal candidates will have: - Extensive experience in structural engineering - A strong background in residential building projects - Excellent report ...

I am looking for a professional who can create a full technical model blueprint for a HyperCar. The blueprint should encompass the exterior design of the car in detail, down to the smallest specifications. I would like the design to be inspired by various concept designs, so an understanding and familiarity with these is crucial. Ideal Skills: - Expertise in automotive design and engineering - Proficiency in blueprint creation - Ability to interpret and integrate concept designs Experience: - Previous work with HyperCar models or similar - Proven record of creating detailed technical blueprints - Experience in automotive design software like CAD or similar

...residential house. I need a professional to create engineering drawings for the installation of a vaulted ceiling. The drawings should be suitable for a remodel of an existing house, and should take into consideration the structural integrity of the house. Please note that I will confirm with the township if they can provide existing architectural plans. If they can, I will provide these to you. If not, I will need you to create the plans from from dimensions that I can share with you, and or visit the residence. Ideal skills and experience for the job include: - knowledge of Ontario building code - Expertise in architectural and engineering design - Experience with residential remodels - Ability to create detailed and precise engineering drawings - Knowledge of...

I have a line art sketch that needs to be transformed into either a blueprint sketch or a 3D mesh. The purpose of this conversion is for visualization or presentation, particularly center...prototype. Key Requirements: - Highly detailed: The final product must capture every intricate element of the original sketch, reflecting a high level of detail. - Proficient in CAD Software and 3D Modeling: You should be well-versed in using CAD software and 3D modeling tools to create precise and professional-grade designs. Ideal Skills: - Mechanical Design: Given that the project revolves around an automotive prototype, a background in mechanical design will be beneficial. - CAD Software: Proficiency in CAD software is essential. - 3D Modeling: Extensive experience in 3D model...

I'm in need of an expert to design a the components needed for a power coating Owen with electrical use Key Responsibilities: - Design a control panel that facilitates temperature control. - Provide advice on suitable electrical components for the design/help source in UK - The design should accommodate the use of a temperature controller. Ideal Skills: - Expertise in electrical engineering and control panel design. - Experience with designing for industrial equipment, particularly powder coating ovens. - Ability to create user-friendly, efficient designs.

I'm seeking a modern logo for my commercial diving business. The logo should be clean and smart. See other examples attached. NOT AER-TECH it should be Aer-Tech Name of business: Aer-Tech Marine Services Or Aer-Tech Diving Or Aer-Tech - Ideal skills for this project include graphic design, branding, and a strong understanding of modern design aesthetics. - Experience in designing for the marine or diving industry would be a significant advantage. Civil engineering - A portfolio showcasing minimalist and modern style logos will be highly regarded. - I value creativity, attention to detail, and the ability to take constructive feedback.

I need professional assistance to address comments on an architectural project which has been submitted and already built to a city agency in Honolulu, Hawaii. The project is for an optementry practice. We have only added a couple walls for an indoor commercial location. - Comments mainly revolve around compliance with building codes - There are detailed comments I need help responding to The ideal freelancer should have a strong background in architecture or structural engineering, with specific expertise in building code compliance. Prior experience dealing with city agency comments in Honolulu or similar jurisdictions would be an advantage. Strong communication skills are essential to craft appropriate and professional responses to the comments. Responses should...

I need professional drawings for a wooden picket fence to submit for council report and consent approval. Key Responsibilities: - Prepare detailed and accurate technical drawings of a wooden picket fence. - Ensure the drawings meet local council regulations. Skills and Experience Required: - Proven experience in preparing engineering or architectural drawings. - Familiarity with local council requirements for fence construction. - Knowledge in wooden picket fence design. You don't need to worry about material selection as I have already chosen everything. I am just looking for someone to create the necessary drawings for council approval.

Παρακαλούμε Κάνε Εγγραφή ή Κάνε Είσοδο για να δεις λεπτομέρειες.

As the owner of a new Racing Motion Simulator company, I'm seeking mechanical engineering and automation support to transition to a professional-grade version of our existing motion simulator. The current motion platform is being reconfigured, shifting the center of gravity and increasing the need to move approximately 400lbs in 2 Degrees Of Freedom (DOF). Key Project Goals: - Enhance the speed, stability, and precision of the motion simulator - Create effective solutions for handling increased weight - Ensure smooth movement of the reconfigured platform Ideal Candidate: - Expertise in mechanical engineering and automation - Proficient with brushless DC motors or actuators - Innovative problem solver with a focus on cost-effective solutions - Exper...

I'm in need of a talented expert with experience in auto parts design and manufacturing. This project involves designing components for our hypercars. Key Responsibilities: - Design and manufacture body parts for high-performance hypercars - Focus on aerodynamics and exterior design Ideal Skills and Experience: - Proven experience in designing auto parts, particularly for high-performance vehicles - Strong understanding of aerodynamics and exterior design - Experience with designing for hypercars is a plus - Excellent engineering and design skills - Proficiency in relevant design software

...reviews and recommend automated review tools for the project - Strong communication skills, both written and oral, and the ability to smoothly interact with development team leadership and clients - Strong analytical and problem-solving skills - Ability to collaborate with the product, engineering, and business teams to understand the requirements that will form the core foundation for all future products - Candidate should be self-motivated, independent, detail-oriented, and a team-player - A strong candidate would also be able to demonstrate their competency in the following areas: - Ability to adapt quickly to an existing, complex environment* Passionate about building high-quality systems with software implementation best practices* Project experience in working...

I'm looking for a specialist to assess the structura... specifically under seismic conditions. Key Requirements: - Conduct thorough seismic analysis focusing on the structural integrity of the metal sheets. - Provide detailed reports on the seismic resilience of the steel sheets. - Ensure assessments comply with relevant seismic and structural safety standards. Ideal Skills and Experience: - Prior experience in seismic analysis and structural engineering. - Expertise in working with steel and understanding its properties. - Familiarity with the design and use of IT cabinets is a plus. The assessment report should meet the requirements for a compliance audit. The seismic assessment should follow international seismic standards. The seismic assessment should follow the relevan...

I need professionally designed spur gears suitable for a steel reduction gear box. Key Requirements: - The gears must be designed to withstand the rigors of industrial use, given their application in a reduction gear box. - I require someone who is well-versed in gear design, particularly spur gears, with a st...the requirements for durability and precision in this context. - The gears must undergo a thorough load capacity analysis to ensure they can handle the maximum expected loads during operation. - Detailed specifications for heat treatment processes to enhance gear strength and durability must be provided. Ideal Skills: - Expertise in CAD software for gear design. - Strong background in mechanical engineering. - Previous experience designing steel spur gears for redu...

...a California door with the necessary safety features. I need a mechanical analysis of the elevator and door system, along with repair recommendations. You must know the California door elevator security standard. It has to do with how both doors locking and safety mechanisms work. I will try to get elevator details posted here soon. I really need someone who knows the elevator maintenance and also when an elevator is functioning so badly that it must be replaced. Ideal skills and experience for the job include: - Proficiency in mechanical analysis - Experience with elevator systems - Knowledge of California safety compliance standards - Ability to diagnose and suggest repairs for mechanical issues - Electrical engineering expertise to troubleshoot and...

...seeking a talented CAD professional to create an intricate 3D model of a bike rack, complete with comprehensive engineering drawings. The bike rack must be designed for a towbar and incorporate the following features: - A secure locking mechanism - An adjustable size to accommodate various bikes - A foldable design for easy storage and transport The primary use environment for this bike rack will be a commercial setting, hence durability and practicality are key. The preferred material for this design is steel, known for its strength and resilience. Ideal candidates for this project should have: - Proficiency in AutoCAD and 3D modeling - Experience in designing engineering drawings - Previous work with commercial-grade bike racks - Understanding of incorpora...

Concept is only 20$ for first time Free if the concept is not accepted Mechanical final design after 1-2 weeks max with unlimited revisions Will be 200-400 based on complexity (source files included) Pcb with easy eda is 200 $ probably another week Based on the schismatics agreement Render 30 $ each model Animation 50$ assembling model Manufacturing simulation 50$ Stress analysis 50 each task Generative design parts 100$ each accepted output 50$ for mechanical drawing note : price can varies based on agreement (less/more)

I have ongoing work related to our previous project 'I have a new business as a cannabis cultivator and engineering consultant and need a logo. The logo is a cannabis plant in the vegetative stage of growth with a crown on its canopy (green, black, and purple). Complete in 1 week.'

I'm seeking a professional to transform my mixed reality lens concept into a feasible, cost-effective prototype. The lens should have features similar to the Apple Vision Pro or Meta Quest 3. Key Features: - Spatial Audio: The lens shoul...Android, so experience and understanding of Android systems is a plus. Visual Quality: The prototype should deliver Ultra High Definition (4K and above) visual quality. Previous experience with high-end visual technology is highly desirable. Ideal Candidate: The ideal freelancer for this project should have extensive experience in hardware development, particularly in creating mixed reality devices. A strong understanding of cost-effective manufacturing techniques is crucial. Skills in audio engineering and visual technology will b...

I'm seeking a skilled freelance mechanical engineer with substantial experience working with SolidWorks. The primary focus of this project will be on the manufacturing process, specifically the review of SolidWorks models. Key Responsibilities: - Reviewing SolidWorks models, including 3D parts, assemblies, and sheet metal parts - Generating prints from the model reviews - Contributing to the optimization of our manufacturing process Ideal Skills and Experience: - Proficient in SolidWorks with a focus on model review - Experienced mechanical engineer with a strong background in manufacturing - Able to design jigs and fixtures, and create assembly instructions - Skilled in optimizing production workflow Your contributions will be integral to our production proces...

We are hiring for MERN Stack developer for a permanent remote location. Role Description This is a full-time remote role for a Mern stack developer with 4 plus years of experience for the esteemed client. The Mern stack developer will design, implement, and maintain web applications using MongoDB, Expres...Node.js Experience in designing, implementing, and maintaining web applications for 4 years. Knowledge of RESTful APIs and asynchronous programming Ability to work in a collaborative team environment Strong problem-solving skills and attention to detail Excellent communication and time management skills Experience with version control systems such as Git Bachelor's degree in Computer Science, Engineering, or related field Candidates from India are only eligible to apply for...

I'm seeking a professional with expertise in structural engineering and steel design for a new house in Wisconsin. The project involves designing a steel centerline beam to support the floor structure, as well as selecting and specifying appropriate fasteners and columns. Key requirements include: - Designing a steel centerline beam, fasteners, and columns - Ensuring the design adheres to local building codes - Selecting the type of steel to be used, with preference for a 10" x 4-3/4" X 25.4 steel beam Ideal Candidates Should: - Have a strong background in structural engineering - Be familiar with local Wisconsin building codes - Have experience in designing with structural steel, cold-formed steel, and stainless steel - Be able to provide a comprehens...

I need a Chemical Injection Skid designed and engineered for a variety of uses including corrosion inhibition, scale inh...Chemical Injection Skid designed and engineered for a variety of uses including corrosion inhibition, scale inhibition, and defoaming. The skid will be operating in an onshore environment and will be utilized across several industries such as Oil and Gas, Water Treatment, and Chemical Manufacturing. Skills and Experience Needed: - Strong background in chemical/mechaincal engineering - Experienced in skid design and engineering - Familiar with the needs and standards of the Oil and Gas, Water Treatment, and Chemical Manufacturing industries - Knowledgeable about corrosion inhibitors, scale inhibitors and defoaming chemicals - Capable of designing for onsh...

I need a comprehensive foundation survey report for a single-family home that I'm renovating. The primary focus of this survey should be the subsurface conditions of the foundation. Ideal Skills and Experience: - Expertise in structural engineering or a related field - Experience in conducting foundation surveys, particularly for residential buildings - Ability to assess and report on subsurface conditions - Knowledge of potential implications for building renovation - Strong written communication skills for clear report writing The foundation survey report needs to be completed within 1 week. water retention issues below the house

I'm seeking a skilled Geotechnical Engineer to assist with my assignments focused on Soil Mechanics. The tasks will primarily revolve around: - Seepage and Permeability: Understanding the movement of water through soil and the implications for various engineering scenarios. - Earth Pressure: Analyzing the forces exerted by soil on structures. - Soil Compaction: Understanding the compaction characteristics of different soil types. - Slope Stability: Examining the stability of slopes and the potential for landslides. - Soil Settlements: Evaluating the settlement behavior of soil under various loading conditions. - Bearing Capacity: Assessing the load-bearing capacity of soil for foundation design. - Consolidation: Studying the process of soil consolidation and its impact on stru...

I'm in need of a professional who can assist in sourcing fully electric (battery-operated) agricultural tractors from China. >..>> I found one company in China *The work is as follows: 1- You will search for factories in China that manufacture this tractor (contact me so I can send you pictures an...- Knowledge of international shipping processes and import regulations. Please note, these tractors need to be fully battery-operated, not just starter electric tractors. The ideal freelancer should be able to provide options that are both cost-effective and high-quality, meeting international standards. A background in agricultural engineering or a related field would be a plus. The tractors should have a power range between 30-100 HP. The sourcing project shou...

WEBSITE DEVELOPMENT A fully functional NextJS website, ready for launch, with animations and SEO-optimized content. Total number of pages: Up to 15 Indicative Sitemap 1. Home page with relevant sections 2. Solutions with following sub pages a. Support b. Engineering c. HR d. Marketing/Sales e. Legal f. Finance 3. About us 4. Blogs a. Blog Page b. Blog post page 5. Contact us

Data Engineering: Design Data Warehouse, Data Model, ELT / ETL Data pipeline. 1. Click above RawDataSet link and download 3 datasets: AUS_SubCityDistrictState_Data ,NSW_PropertyMedainValue, and NSW-Public-Schools-Master-Dataset. 2. Use Visual Studio and create SSIS package, design dataflows to extract data from AUS_SubCityDistrictState_Data, NSW_PropertyMedainValue and NSW-Public-Schools-Master-Dataset (csv), and load data into tables into your Data Warehouse, use “load_” as prefix to name all your data load tables in your Data Warehouse. 3. Follow Kimball dimensional modeling methodology, Design Snowflake Schema Model, or Star Schema Model including dimension and fact tables in Data Warehouse, use Bus Matrix and think about what dimension and fact tables you need to cre...

I'm looking for a data engineer to help me design a data warehouse and an ELT/ETL data pipeline, with a preference for the sn...an ELT/ETL data pipeline, with a preference for the snowflake schema. Key Responsibilities: - Design a data warehouse using a snowflake schema - Develop a suitable data model - Implement ELT/ETL data pipelines for data integration and warehousing Ideal Skills: - Proficiency in SQL Server - Extensive experience in data engineering - Expertise in designing data warehouses and data models - Familiarity with snowflake schema - Strong ELT/ETL skills The main goal of this project is to integrate various data sources into a well-structured data warehouse for efficient business intelligence and reporting. The data warehouse will handle a small volum...

I'm in need of an expert who can assist me in setting up a soundboard using Reaper for my live performances. Key Responsibilities: - Configure Reaper to serve as a comprehensive soundboard. - Integrate music tracks and sound effects into the s...live performances. Key Responsibilities: - Configure Reaper to serve as a comprehensive soundboard. - Integrate music tracks and sound effects into the setup. - Ensure the system is fully compatible with a MIDI controller for seamless performance. Ideal Skills and Experience: - Proficient in using Reaper, with a deep understanding of its soundboard capabilities. - Experience in live sound engineering and soundboard setup. - Comfortable working with MIDI controllers. - Ability to troubleshoot and deliver under pressure in a live perfo...

I'm in need of an engineered drawing for a kidney-shaped, in-ground swimming pool. This will be a residential use pool. I already have the pool and can send any measurements you require. Ideal skills and experience for the job: - Civil or structural engineering background - Experience designing residential swimming pools - Proficient in CAD or similar software - Knowledge of local building codes and regulations - Ability to provide detailed and accurate engineering drawings.

I'm in need of plumbing drawings for a commercial property. The focus should primarily be on the drainage system, with special attention to incorporating a grease trap. Ideal candidates for this project should have: - Extensive experience in creating plumbing drawings for commercial properties - A solid understanding of drainage systems and grease trap integration - Proficiency in using relevant CAD software or other plumbing design tools. - Relevant certifications in plumbing design or engineering

I'm seeking an expert in robotics and simulation, specifically with Webots, to create a simulation of a waste segregation robot based on the MG400 model....implemented to optimize the robot's speed and picking efficiency. - The Ant Colony Optimization algorithm should be used to enhance the robot's overall performance. - The simulation should incorporate color sensors to model the robot's perceptual capabilities. Time Frame: The project is time-sensitive and needs to be completed within 3 days. Ideal Skills: Proficiency in Webots simulation, understanding of robotics, and experience with the specified algorithms are crucial for this project. A background in engineering or computer science would be advantageous. Please bid only if you can meet t...

This project focuses on optimizing the design parameters of a cantilever beam and flange coupling system using Python. For the cantilever beam, the goal is to minimize deflection, cost, and mass while adhering to stress and material constraints. For the flange coupling system, the aim is to optimize the radius, bolt type, and number of bolts to reduce mass while ensuring efficient torque transmission. The optimization will be carried out through Python-based algorithms, ensuring that performance, material limits, and cost are balanced for both systems, providing a cost-effective and high-performance solution.

I'm an intermediate Forex trader looking for a seasoned coach to help me develop and master a mechanical trading strategy. My main focus at the outset is learning about testing and backtesting strategies. Key requirements: - Proven expertise in mechanical trading strategies for Forex - Ability to provide clear, structured, pre-recorded tutorials tailored to hands-on learning - Help in understanding the logic behind rule-based strategies and risk management If you have a successful track record in mentoring and mechanical Forex trading, I'd love to hear from you. Please share your background, methodology, and examples of past successes.

There is a somewhat urgent engineering task, and I am looking for someone who is available to work for about 1-2 hours from now.  If you are able to assist, please let me know.

I'm seeking a talented architect with a talent for contemporary design, to create comprehensive architectural plans for an entire house. The designs should encompass all areas - from the living room, to the kitchen and bedrooms and the final product should include the floor plans, construction documentation, electrical, plumbing, mechanical elevation and house renderings. Ideal Skills and Experience: - Proficient in contemporary residential design - Exceptional architectural skills with attention to detail - Able to design for all areas of a house - Excellent communication and understanding of client needs. The house will primarily serve as a single-family residence. The renderings should be highly detailed, showing intricate design features.

I'm seeking a 3D model of a small bevel gearbox, designed for a 22.5-degree angle and a 1:1 ratio. The gearbox will be used for a model airplane with dual counter-rotating propellers, and its primary purpose is to enhance flight performance. The model should be suitable for nylon 3D printing and should have basic functional...flight performance. The model should be suitable for nylon 3D printing and should have basic functionality without excessive detail. Key Requirements: - Design a small bevel gearbox - 22.5-degree angle and 1:1 ratio - For a model airplane with dual counter-rotating propellers - Suitable for nylon 3D printing - Basic functionality without excessive detail Ideal skills include: - Mechanical engineering - 3D modeling - Experience with des...

I require an expert in image processing and object recognition for building a 3D model from a series of photographs. This model will be used for visualization purposes. Ideal Skills: - Proficiency in image processing software. - Experience in object recognition techniques. - Skilled in 3D modeling. - Able to work with photographs. - Software engineering - Experience with machine learning algorithms. Freelancers with a creative eye for detail and a passion for visualization will be preferred. Please provide examples of your previous work in your bid.

I need a software engineering expert who can generate a high-level class diagram with use-case for my software project in Java and Spring framework. Key Responsibilities: - Understand the project requirements and create a high-level class diagram. - Generate use-case diagrams as per project requirements. Ideal Skills: - Proficient in Java and Spring framework. - Software engineering expertise, particularly in diagram generation. - Ability to comprehend and visualize high-level software architecture.

Overview: Create a clean, modern website for Biotrafix, a company focused on biotechnology and engineering education, aimed primarily at a global audience of engineering students (undergraduate and graduate), professionals, and educators, with a geographic focus on North America, Europe, Asia, and Africa. The site’s purpose is to inform, demonstrate Biotrafix’s expertise, and engage users through lead generation and course sign-ups. Core Website Structure: Main Pages: Home: Welcome message introducing Biotrafix’s mission and services. Clear, prominent CTAs for newsletter sign-ups, course enrollments, and booking consultations. Highlight a featured course, recent blog post, or a testimonial to increase initial engagement. About Us: A detailed description...

I'm in need of assistance with my MATLAB coursework, specifically focusing on the application of numerical methods to various engineering problems. Key Requirements: - Proficiency in MATLAB - Strong understanding of engineering concepts, particularly in structural analysis, thermodynamics, and fluid mechanics - Expertise in numerical methods, specifically numerical integration, and the application of the Trapezoidal rule, Simpson's rule, and Monte Carlo integration The project involves the application of these techniques to solve engineering problems. If you have the skills and experience required, I look forward to your bid.

...videos. • Work closely with the marketing team to ensure visual consistency across all materials. 5. Collaboration and Communication: • Liaise with the design and development teams to align on project requirements and timelines. • Provide input on design improvements and innovative concepts. 6. Quick Turnaround Delivery: • Manage multiple projects simultaneously with a focus on meeting tight deadlines. • Prioritize tasks effectively to ensure timely delivery of models and designs. Qualifications and Experience Education • Bachelor’s degree in Industrial Design, Graphic Design, Engineering, or a related field. Experience • 2-3 years of experience in 3D modeling and CAD design, preferably within the jewelry indust...

...framing of my residential building. The project specifically involves: - Engineering the wooden framework of the house - Ensuring the design is safe and compliant with local building codes - Providing cost-effective and efficient engineering solutions Ideal candidate would have: - Extensive experience in residential structural engineering - A strong background in wood framing - Familiarity with local building codes - Excellent problem-solving skills - Ability to provide clear, concise engineering solutions - Licensed Professional Engineer (PE) or Structural Engineer (SE) The expected timeline for the project is 1-2 months. The project will involve working with detailed architectural plans that are already in place. The engineer should ...

I'm seeking a professional with expertise in Electrical Engineering and technical report writing to help me craft a comprehensive KA02/ Knowledge Assessment for Engineering New Zealand. Key requirements: - Utilize existing data and documents I have - Create detailed technical reports - Possess a deep understanding of Electrical Engineering Ideal skills and experience: - Proficient in technical writing and report creation - Background in Electrical Engineering - Experience with Engineering New Zealand's KA02 process Your expertise will help me showcase my engineering knowledge and skills effectively. Let's work together to create a compelling KA02.

I'm in need of a professional video maker to create an animated tutorial video on an automated car parking system. The ideal freelancer should have extensive experience in producing high-quality animated tutorial videos and a solid understanding of software/technology topics. Key requirements for the project: - Create a clear, engaging and educational animated tutorial on an automated car parking system. - Prior experience with technology-related animated tutorial videos is a plus. - Creativity in presenting complex information in an accessible way. - Ability to meet deadlines and deliver high-quality work. The tutorial video should be 3-5 minutes long. The tutorial video should use 2D animation for clarity and accessibility. The script for the video will be provided by the ...

I'm looking for an expert with deep experience in railway architecture a...and rural landscapes, as well as any necessary infrastructure. - Train Design: An in-depth look at the specifications and design of the train itself, ideally with a focus on speed, efficiency, and passenger comfort. - Cost Analysis: An estimation of the costs involved in both the design and implementation of this project, including potential sources of funding or cost-saving measures. The ideal candidate for this project should have a strong background in architecture, engineering, and economics, with specific experience in train design and route planning. The detailed specifications of the train design should be comprehensive enough to provide a clear understanding of the train's cap...

... This role is crucial to addressing customer issues related to functionality bugs and ensuring our help center is well-organized and up-to-date. Key Responsibilities: - Resolving technical issues related to our web-based SaaS product. - Keeping our help documentation current and comprehensive. - Providing effective solutions to customer inquiries. - Escalate complex technical issues to the engineering team for resolution. Ideal Skills and Experience: - Previous experience in a similar customer support role. - Strong communication and problem-solving skills. - Familiarity with Customerly. - Experience dealing with functionality bugs in a SaaS environment. A passion for customer service and technical support will be highly valued in this role. Looking forward to hearing from you...