Esp32 gpio exampletrabajos

I want someone experienced person to solve this task ,need a Arduino ide program for esp32 or esp8266 with TTl to Rs 485 converter to read modbus holding registers of any device,with wiring diagram.

Tool box talk spreadsheet needed exactly like example

Por favor, regístrate o inicia sesión para ver los detalles.

I need to do a video like this or better: I will ´provide two photos Only people with 90% or more will get answer

Connect an lcd display to a esp32, and a vs1053 board along with a lithium battery for a project. I also need appropiate code so that the esp32 can communicate with the display properly, and a system by which the vs1053 can send audio to an app. The app will analyze the audio and send back results to the esp32 and the display more details can be given. I can provide and send materials for the project. I already have a display, a battery, the esp32, the vs1053, and some connectors. Anything else I can buy, as long as it's relatively inexpensive. All I need is a functioning prototype and a possible cad design of the final device.

Hello, I need an Embedded software developer on the ESP32 to write an Ethernet Library, based on the official esp32-arduino Ethernet Library, to support for a custom RF module. The RF module is connected to the ESP32 through the RMII interface and SPI (for configuration). There is an already existing driver but for the STM32, transmiting data in Ethernet frame format, as SDIO host in SPI mode driver. Deliverables: - Source code for the esp32-arduino Ethernet Library for the RF Module - Example code - Documentation Candidates should have strong development experience on the ESP32 and on writing Ethernet libraries. Thank you

We need a simple example in c# how we can make a post of an image on an instagram account so people have to login with their account and post the image daily. we are using Unity3d 2021.3.5.f1. We should need an example to post from player android and iOS devices. we have already some component ready to use in case

Hello we will create Esp32 base mqtt devices for your project with the features discussed before.

We are seeking a technical content writer to write blogs on different embedded topics involving micro-controller boards, and other kinds of sensors and actuators. The project is for 10 blogs with the possibility of recurring requirements based on the quality of the content. (Blog Eg. Write a blog on how to build an Automatic IoT Plant Watering Setup using the ESP32 Microcontroller Board) Reference for example blogs: Kindly share samples of similar reference work done when bidding

Need read ble nus gatt services into esp32 and then mqtt data forward

Hello Friends, I am looking for someone who has experience to deal with NMEA2000. Need to write a code for esp32 or similar to get and send different data like bowthruster control, rudder position, GPS.. thru nmea2000 protocol. Thanks!

The aim of the project is to control the barrier mechanism at the entrance& exit gates of the sparking...the parking slot through a mobile app GUI like a flutter. The reason for that is to make a parking more smarter by pre-booking for the app, navigation helps them to find where they parked and payment. Controlling the barrier since uncertain behaviors can happen like leaving the car all day at the slot which is annoying others. Required for me to have the hardware: A microcontroller such as ESP32 / Arduino / servo motors / Leds / LCD and a space for a parking slot. Software: A GUI with features such as ( booking own slot in real-time, Navigation, and payment, and might more) I would like to hear from you very soon. Thanks For those who stay in Malaysia, Kuala Lumpu...

I have a custom code that uses the PS4 controller library. When I try to verify the code with arduino IDE with the XIA_ESP32CS board selected I am getting error, specifically to L2CA You will need ard...uses the PS4 controller library. When I try to verify the code with arduino IDE with the XIA_ESP32CS board selected I am getting error, specifically to L2CA You will need arduino IDE Install the board manager ESP32 version 2.07 Install the PS4 controller Library Open example project from file menu - PS4Receive data Select board type XIA_ESP32CS Fix the bluetooth compatibility issue. Confirm it is working by compiling code. (I can test it on my end, so you won't need the exact microcontroller) Alternatively, you could test it on a different esp32 board .

I have implemented a simple websocket echo server and a corresponding client that runs on separate esp32s3’s and communicate via wifi and it works. However the performance is very poor (~ 500ms for a roundtrip) so what I need is a optimization giving ~50ms roundtrip times. I have also implemented a python client and tested it against the esp32 server with good results (1000 roundtrips): Number of echos over 50 millies: 999 Number of echos over 75 millies: 40 Number of echos over 100 millies: 29 Number of echos over 150 millies: 13 Number of echos over 200 millies: 8 Number of echos over 250 millies: 8 Number of echos over 300 millies: 5

...the ESP32-S3 module with a USB port for a project. The ESP32 should boot from its flash and first detect if there is a USB pendrive plugged into it. If so it should copy two files - the executable file and the .HTML file from the pendrive to its flash. Then it should reboot, obviously now ignoring the pendrive and run a HTTPs secure webserver over WiFI in AP (access point) mode. Once a user logs in, the HTML file (about 250k) is served to the user, along with the application data from a 16384 byte RAM array on the ESP32 using the Websocket API. Changes made on the webpage by the user, usually using an Android tablet, also using the WebSocket API are stored in the RAM array, and also sent over the SPI bus to the rest of the system. At powerdown, indicated o...

Hi, I'm looking for a freelancer to help us design and build an ESP32-based Cube for home safety and monitoring. The Cube will include sensors to detect gas leaks, fires, and motion, as well as measure temperature and light levels in the home. The Cube will also have a display to show the time and other important information, and will be capable of sending notifications to the user's phone in case of events or hazards. Additionally, the Cube will be modular and scalable, with separate modules or classes for each sensor and functionality. We are looking for an experienced freelancer who can provide expertise in the following areas: ESP32 development Sensor integration and programming MQTT protocol PCB design 3D modeling and printing/laser cutting Software architec...

Im currently working on a simple project creating a easy interactive touchscreen user interface consisting of menu cycling and press functions that control connected devices.

Developer must be able to make this Arduino board to connect to app in android by BLE and display any word sent by the app on the oled screen.

As described, 8 TTP223 sensors. it has to be seen as a bluetooth midi device in order to be able to send Midi notes (decided in the code) through any app like OPL-3 MIDI that sees the MIDI device.

Need help of an expert on ESP32 ! I Have a working program running on an ESP32 on a single core. Would like to separate functions to separate cores and have both functions Run simultaneously without affecting each other. I’m using a ESP32 Wemos mini D1 module. Here is the list of parts used on the project: - ESP32 Wemos mini D1 module - RS485 module - sd card module - RTC Module Esp32 is used to run: - Webserver - Wifi - Run Functions from the sketch RS485 module is used for communication between esp32 and Sensor SD card module is used to store data from the sensor RTC module is used to keep track of time.

Hi, I need code small progamming for ESP32-CAM - wifi web+camera+display+sensor temp+hum+fan

Hi, I need code small progamming for ESP32-CAM - wifi web+camera+display+sensor temp+hum+fan

Hi, I need code progamming for ESP32-CAM - wifi web+camera+display+sensor temp+hum+fan

I have implemented a simple websocket echo server and a corresponding client that runs on separate esp32s3’s and communicate via wifi and it works. However the performance is very poor (~ 500ms for a roundtrip) so what I need is a optimization giving ~50ms roundtrip times. I have also implemented a python client and tested it against the esp32 server with good results (1000 roundtrips): Number of echos over 50 millies: 999 Number of echos over 75 millies: 40 Number of echos over 100 millies: 29 Number of echos over 150 millies: 13 Number of echos over 200 millies: 8 Number of echos over 250 millies: 8 Number of echos over 300 millies: 5 And I need the same performance with a client implemented in C/ESP-IDF. I’m using ESP-IDF 5.0.1 and the sources are attached.

Hello, I need to create pictures based on the example. I need more or less the same picture but with a different graphic design and colors. I need 2 pictures, one picture of Clitoris as in picture A, with the same structure but with colors and graphic style similar to picture B. The second picture is a comparison of the penis and clitoris as in picture C. The designs need to be done from scratch and have unique designs! PLEASE DON'T SEND THE SAME PICTURE CHANGED BY USING SOME FILTERS etc. DO THE WHOLE DESIGNEE FROM THE SCRATCH! I will ask you for the vector.

A PHP example on how to upload files to Contabo bucket storage (S3 Compatible bucket storage) and select all files w/URL from bucket. Just need a basic example of how to accomplish this. I can provide a bucket with API keys for testing.

A c# (Windows form application) example on how to upload files to Contabo bucket storage (S3 Compatible bucket storage) and select all files w/URL from bucket. Just need a basic example of how to accomplish this. I can provide a bucket with API keys for testing.

I am looking for expert who can make me a program using ESP32 chip or any other micro controller to satisfy my application. Any experts who can do it and prove with in short term can connect me.

we have a RGB panel and ESP32 trinity. https://www.amazon.it/gp/product/B0B6ZMHCW6/ref=ox_sc_act_title_1?smid=A242H00PYEV7RY&psc=1 Examples for ESP32triniti can be found here: The ESP 32 must be a ModBus TCP/IP Server. the value of modbus register 30000 must be displayed on the first line the value of modbus register 30002 must be displayed on the second line the value of modbus register 30004 must be displayed on the thrd line. All value are floating point number (2 word). Value generally are from 0.00 to 30.00 with two decimal, but if more extended, row are to scroll. Color of row (each) must be configurable in .ino file At start-up it show a logo, next 5 seconds show value. ip address is take

We are a small company with a custom board based on the T... During prototype revisions we've been running with Linux kernel 4.14 kernel provided by in the TI-SDK. With 4.14 going End-Of-Life in Jan 2024, we want to migrate to Linux kernel 5.10. I have been trying to bring the board up on the latest SDK/5.10 Kernel with difficulties. Although the board boots and we have serial communication, there are issues with the peripheral devices (ethernet, pinmux gpio, etc) I attribute to DTS changes in the SDK and kernel differences. We no longer employ someone with this skillset. We are looking to outsource the migration to the latest SDK. The latest TI-SDK contains, • U-boot 2021.01 • Linux kernel 5.10.100 • gcc-x86-arm-9.2-2019.12 toolchain ref:

Hi, I am looking for a pcb design with the following specs: - Should be done in Kicad 6 - All parts should be available and in stock from lcsc (part numbers and footprints properly logged on kicad) - Manufacturing and output files ready for JLCPCB assembly - Part selection should be optimized for cost and reliablity - PCB should be resilient against emi Parameters - ESP32 module - 4x4 channel ADC - ADS1115 with different addresses selected. Broken out to phoenix screw terminals. The ADC input should have a voltage divider to support the reading of max 13.6v (13.6v 7AH battery) - Power: support 12vdc input. (13.6v 7AH battery) broken out to phoenix screw terminals. - I2C bus broken out to phoenix screw terminals. - 4xio broken out to phoenix screw terminals with applicable...

I have some code that needs to be enhanced, it is written in flutter

I need a PCB design to be used for manufacturing. I need it to be 40mm * 16.5 mm. A thickness of 1.5 mm maximum, though I prefer the thickness to be as low as possible to save money as long as it meets re...the chip would also send over the value of the voltage it gets from the battery so I can figure out when the battery is too low and needs to be replaced. Just a note I will not be using an on chip MCU. Lastly, as mentioned, I am wondering if there is a scenario in which I don't need to use HX711. Here's my reasoning: The Bluetooth chip ATBTLC1000A, has two pins called "configurable mixed-signal GPIO" ; they are pins 17 and 18. Since they accept Analog data, I was wondering if I could just directly connect it to my Wheatstone bridge and skip using HX711. Will ...

Brief Create a python script that runs at startup of the PI Using Ground Pin 6 and GPIO 16 for an attached button On startup Send POST request to an ip address “current”: “manual” On a button press Send POST request to an ip address “current”: “manual” On the next press within 5 minutes of last press “current”: “internall” If no activity for 5 minutes send “current”: “internal” For debugging purposes and in some print statements print("Button is Pressed =current manual") print("Button is Pressed =current internal") else print("Button is not Pressed") Loop Forever except KeyboardInterrupt:

Hi, My hardware: ESP32 with an I2S microphone ICS-43434 connected. I have a firmware1 for ESP32 which records sound in very bad quality. So the microphone is not compatible with the driver in this firmware. I have another firmware2 which records sound from the same microphone in very good quality. So this I2S driver works perfect from firmware2. I need to get firmware1 running with good sound quality recording. And hope you can do that for me. Here is firmware1: And firmware2 (with good sound): I think the problematic file in firmware one is this:

The thermometer is is a Fine Offset WH2/FT007TH. In order to offload the ESP32 it might be better to use a integrated receiver like RFM69 or CC1101 instead of RXB6 simple superheterodyne receiver. However if the ESP32-C3 has enough power for all tasks, the RXB6 will be fine too. The wireless protocol is documented here: Data needed from sensor: -Sensor ID (1-8) -Temperature in celcius with decimal -Humidity Defined variables: -SSID -Password -HTTP_POST_URL -API_KEY When packet with valid CRC is received: -Make HTTPS POST: key=test&ch=channel&tmp=temperature&hum=humidity -Implement timeout for HTTPS POST (so it will not hang if internet is offline) -Print received data to terminal with result for HTTP POST (OK/ERROR) Code

Need some expert help designing a small circuit to drive LED's from a GPIO PWM output from a pi (raspberry or orange. Outputting PWM on a raspberry pi - I need to drive a p channel mosfet to drive an led. Needs to ba able to have fast switching speed. Currently looking at but need to drive it from pi out put ( approx 3.3v) - I've tried gate driver TC4429 so far

Hi, i need to get the LIS3D accelerometer running on an ESP32 on I2C. The LIS3D has a INT pin which i want to use when the Accelerometer detects motion.

We simply need few workers who can agretste on some word on English z

Need to interface ESP32 to CS1237. Need to implement register settings as well which includes SPS, gain etc. using Arduino

I have 4 meter devices that will be placed at a water well. They communicate using RS485 MODBUS. I need to use an ESP32 and RS485 Max to collect data in real time to send to a database so the information can be seen on a website. The website will consist of my business website which will be an access point to water companies who login to view their data. I will need an admin to create new customer/water company accounts and assign admins to the companies along with the ability to add devices for new well sites. I will need to be able to add company logos to their pages for customization. The company pages will need admin logins and user logins. Each company may have as few as 1 well site or as many as 100s of well sites. Company admins will need to be able to assign users to well s...

...the Telemetry card project that we will develop with ESP32. General Qualifications - Developing FreeRTOS projects with ESP - Able to remotely update ESP software - It will communicate with the server via socket connection with MQTT - It will communicate via UART - Provide internet access with GSM Module - Able to communicate with MDB protocol There are ESP32, Quectel EC200 GSM Modules in the project. It communicates with ESP32 and Quectel GSM module via UART. It will also communicate with Vending Machine and Payment Devices with two UARTs. The software on the ESP will be updatable from remote servers. It will communicate with the servers over Socket with MQTT protocol. We are dealing with applications from experienced engineers with ESP32 and Quectel. Inexp...

[ ] 6 user input [ ] cap touch sense [ ] WiFi input online off-line [ ] Bluetooth input [ ] 6 buffered outputs relay drive [ ] 3.3to5 volt operation. Continuous and reliable robust operations. [ ] 7 led out [ ] WiFi and BT comunication [ ] Cloud data base connectivity, firebase or any cloud services [ ] Local input output status sync with cloud [ ] Esp32 or similar module [ ] OTA firm ware updates [ ] Alexa Google assistant command implementation WiFi comunication. [ ] 2 -3 weeks final delivery [ ] Schematic and firmware source code compileable submission mile stone 1 [ ] pcb design fabrication and testing [ ] Corrections modification submition if any [ ] Integration with http/Android and database chk Mile stone 2 [ ] Final integration to cloud and app and browser 1week chec...

Hallo, wir suchen, kurzfristig, einen Programmierer, der uns unsere ESP32 programmiert und einen Raspberry mit einer Weboberfläche zum Konfigurieren (Steuern) der Microcontroller. Sowie sammeln der Daten und zwischenspeichern bis Sie in unser eigenes ESP übernommen oder abgeglichen werden. json ? Wobei das noch nicht feststeht.

i want to implement modbustcp on esp32 using ethernet module

Hi, I am looking for a PCB designer to make me a custom ESP32 shield. I need to connect various sensors and actuators to an ESP 32 and have a computer connected to the monitor and control those things. I PCB dimenzions is predefi. It will be place on DIN Rail. Also, I would like to hear ideas and improvements from you. I am mechanical engineer but also have basic knowlage of electronic. It is clear to me, that the ones who are professionals in electronics know the best way to do it. From you I expact: Zoom meeting before starting the project. Work in with this google docs. Ask questing regard of the design here. I will put the answer here. Send me screenshots of the project meanwhile. Also the project can chance during the develop. We can came acrose the problem I did’t con...

We are in need of an embedded engineer familiar with Esp32 development environment along with Apple ancs and android knowledge. basically we are in need of an IOT helping hand who can deliver us Esp32 ble project that can communicate to iOS/android devices based on the connection. the Esp32 device should be able to receive notifications, answer calls, and also perform some media operations

Hello, I need to create picture based on the example. I need more or less the same picture but with a little bit different graphic designee and colors. Designee needs to be done from the scratch! PLEASE DON'T SEND THE SAME PICTURE CHANGED BY USING SOME FILTERS etc. DO THE WHOLE DESIGNEE FROM THE SCRATCH! I will ask you for the vector. I need to make it in 48 hours.

Hello Esp32 Engineers, I'm looking for someone to help me build my Ultrasonic Push Up Board. I have a user interface that's similar to Guitar Hero when you complete a rep on the workout. The code functions but, I need help to create a touchscreen interface for an ili9341 using an ESP32. Also, I would like it to be an IoT Project where exercisers can view their workout stats on a webpage. Let me know how much compensation you are seeking? Thanks, Patrick

I need the module to operate on UWB channel 5 (6.5GHz) and channel 9 (8GHz). It has to be interoperate with the Apple U1 chip. This module supports Radio waves and secure reliable range sensing for wireless devices.