Esp32 wifi serial bridgetrabajos

I'm looking for a skilled cartographer and data visualizer to help me create a detailed map showing the patterns of serial infidelity. The primary purpose of this map is to visualize data patterns related to infidelity. Key Tasks: - Utilize specific data points, mainly location markers, to plot different instances of infidelity across a geographical area. - Each location marker should contain detailed information, including event descriptions, timestamps, and relevant user demographics. Ideal Skills and Experience: - Proficiency in data visualization and cartography - Experience with geo-spatial data analysis - Strong attention to detail - Ability to present complex data in a clear and engaging way. The final map should be delivered as an interactive digital map. The final ...

I'm seeking a skilled engineer to design and develop a WiFi and Modbus based multi-input embedded module for industrial automation. This module needs to handle both analog and digital signals. In addition to WiFi and Modbus, it should also support Bluetooth for communication. Ideal candidates for this project should have: - Extensive experience in embedded systems design - Proficiency in both WiFi and Modbus protocols - Ability to design for both analog and digital signal processing - Knowledge of Bluetooth integration - Prior experience in industrial automation projects is a plus The primary development goal for this embedded module is reliability. The embedded module should have a compact form factor. The module should interface with temperature and pressure s...

I'm looking for a skilled PCB designer to update a PCB for a consumer electronics device. it uses an ESP32 module Key Responsibilities: - Update a PCB suitable for a control interface in consumer electronics. - Prototype -Assist with future Designs Ideal Skills and Experience: - Extensive experience in PCB design, particularly for consumer electronics. - Proficiency in working with Microcontrollers and Communication Modules. - Strong understanding of designing PCBs for control interfaces. - Ability to deliver user-friendly and efficient designs.

...site we have installed equipment (analyzers). The installed equipment is either company-owned or customer-owned. We also have Inactive equipment that is not being used and is sitting in storage. Each piece of equipment is assigned to a specific product category (e.g. Hematology), categorized by supplier (e.g. sourced from General Electric), has a specific name (e.g. Analyzer Model A), a unique serial number, a unique fixed asset number (in the case of company-owned equipment per the fixed asset register), and is assigned to a designated service engineer for maintenance and repair purposes. Other pertinent data include installation date, purchase cost, etc. We require a dashboard pursuant to which we can lookup the sites where a particular product category has equipment installati...

...ready. This project involves integrating an Arduino Nano ESP32 with a DY-SV5W MP3 audio module to play a specific audio file stored on an onboard SD card when an analog audio signal is detected. The audio currently plays, but I am having trouble getting the Arduino to control the start and stop of the DY-SV5W Audio. Assistance is required to trouble shoot or validate both wiring and Arduino IDE coding to ensure proper functionality. Project Overview: Hardware: Arduino Nano ESP32: Central controller for the project. Pinout and datasheet are provided. DY-SV5W Audio Module: Plays preloaded MP3 files from its onboard SD card. Datasheet provided. Signal Source: Analog audio signal to trigger the Arduino. Workflow: The Arduino Nano ESP32 monitors for an analog audio ...

...users to upload, organize, and share documents and media files. - Integrated Chat: Add an integrated chat feature to facilitate real-time communication among users. - Task Management: Incorporate task management features, such as to-do lists, deadline tracking, and task assignments. - Cookies management to store offline - Device Management: Communicate using API to local printers, scanners, or any serial devices - Enable multi-language support to cater to a diverse user base. - Ensure the application is fully responsive and mobile-friendly. - Allow users to create and manage custom workflows. - Provide API access for third-party integrations. - Incorporate an integrated calendar for scheduling tasks and meetings. - Define role-based permissions for advanced user access control. ...

...talented map designer to create an enhanced version of the Team Fortress Classic Map 2Fort for a remake/Redux. The map should feature improved textures but maintain a retro style. Specific Modifications: - The layout of the map should be tweaked in certain areas to improve gameplay. Creativity and experience in map design are key to making these modifications effective. - The flag room and the main bridge should be a primary focus for these changes. Visual Style: - The overall aesthetic should be vibrant and reminiscent of a Half Life (1999) stylized look, while still capturing the original Team Fortress vibe. - High-quality texturing is a must, but the map should not stray into high-definition modern graphics territory. Skills and Experience: - Proficiency in map design for T...

...Unfortunately, I can't even log on to activate it. I can access Safe Mode, but that's not allowing me to activate Windows either. Here's the situation: - I tried resetting Windows for 30 days using oobebnk, but it requires an Administrator password that I don't have. - The computer doesn't have USB boot functionality; it only has a floppy drive and a CD player. I do have a Windows XP CD with a new serial number. - I can't repair the system because of the admin password issue. - It's critical that I don't reinstall Windows as I have important programs on this machine. Cant run Setupoobebnk or restore, rename files or edit regedit requires admin rights I can access the BIOS settings and I will need help with commands that can be run in s...

bridge adalah menghubungkan 2 jaringan atau lebih secara bersamaan

I need a skilled C programmer who can write a program that facilitates communication with another device through the serial interface on a Linux machine, using v.24 signalling. Key Requirements: - The primary function of this program is to enable device communication. - It should support communication through the RS-232 interface. - The program will be interacting with a serial-connected device. This project will involve utilizing libraries and simple test programs that already exist. Your task will be to consolidate these resources into a fully functional C program. Ideal candidates should have a robust understanding of C programming, Linux systems, and serial communication protocols. Prior experience working with RS-232 is highly desirable. See: https://github

I'm looking for an experienced engineer to help me set up my SIM7600g-h module connected to an ESP32-32 to monitor sensor data (specifically temperature and humidity) and send it to my Arduino IoT Cloud account via GSM internet. The data should be displayed in graphical charts on the cloud. I am looking for someone who can develop a code (ino) with the necessary .h files to monitor a DHT22 sensor in my Arduino IoT Cloud account, I have already done it through a Wi-Fi connection, but now I need it through GSM. I have the SIM7600G-H module, DHT22 sensor and the esp32-32 module connected and ready to test. Key Requirements: - Connect the SIM7600g-h module to ESP32-32 and Arduino IoT Cloud - Connection need to be GSM (APN: , user: webgpr, pass: webgprs2002) - Mo...

...protocols to prevent system failures. Continuous Improvement: Collaborate with design, software, and prototyping teams to implement iterative improvements. Benchmark system performance against industry standards and project goals. Required Skills and Tools Programming and Debugging: C++, Python, and MATLAB for developing integration scripts and algorithms. Debugging tools such as JTAG Debuggers or Serial Monitors. System Integration Tools: ROS (Robot Operating System) for managing multi-component systems. CAN Bus analysis tools for subsystem communication. Simulation tools like Gazebo or Unreal Engine to test integration in virtual environments. Testing and Monitoring Tools: Telemetry systems for real-time data logging and performance tracking. Oscilloscopes, multimeters, and spe...

I am looking for a programmer who can develop an ESP32 program to control WS2812 LEDs for a stair lighting system. The project should incorporate a user-friendly GUI and integration with laser/PIR motion sensors. If you program ESP32, are skilled in efficiently managing WS2812 LED effects, and can combine it with a clear and aesthetically pleasing GUI, then this offer might be for you. Before contacting me, please make sure to read the full content of my advertisement and review the attached files. I will prefer someone who, after initial considerations, can propose a vision of the program in the form of an algorithm and/or a flowchart. I need a program for ESP32 to control WS2812 LEDs on stairs. The controller must work with two motion sensors (IR or laser) and in...

I'm looking for a seaso...application by adding a robust payment processing system. Key Requirements: 1. Objective To implement a serial number-based payment system that allows users to recharge their in-app wallets by entering unique serial numbers generated by the Admin. These serial numbers serve as prepaid payment options alongside traditional payment gateways. 2. Scope of Work This project involves developing, integrating, and managing prepaid serial numbers for wallet funding. The serial numbers will have varying denominations and will be generated and managed through the admin interface. Ideal Skills: - Proficient in mobile app development - Experience with payment integration in apps - Familiarity with serial number generation and m...

Estou desenvolvendo um esquema elétrico que gostaria de revisar com alguém experiente para identificar possíveis erros e ajustes. O projeto inclui um ESP32, CC1101, conexão USB, CI para gerenciamento de bateria, infravermelho, tela e botões.

Turnstile is a blockchain bridge we (Clarified Labs) have built between Ethereum and the upcoming Aztec Layer-2 network. We want to extend the UI to add the ability for users to send public and private token transfers. Please see this Google Doc for more details, including links to Figma: You need to have previous experience with blockchain app design (wallets, bridges, etc.). Please share relevant work in your reply.

I'm looking for a professional to conduct a thorough Vulnerability Assessment and Penetration Testing (VAPT) on my network infrastructure. Key Requirements: - Assess and test various network devices including routers, switches, servers, firewalls, Wifi, and Linux systems. - The assessment should cover both Windows and Linux operating systems within the network. Ideal skills for this job include: - Extensive experience in VAPT and is Certified. - Proficiency in network security and penetration testing. - Familiarity with both Windows and Linux operating systems. - Ability to conduct assessments on diverse network devices using the state of the art cybersecurity tools and techniques.

I need to make a firmware project on an esp32 to communicate with the p400 microhard to send nmea and rtcm RTK sentences to another p400 radio. I need someone with knowledge of protocol Satel, transeot, trimmk3, south I prefer freelancers who have knowledge in some specific areas: Facilitates communication Knowledge in the area of: Radio frequency, programming, esp32, gnss system, messages and communication protocols, nme, Sentences nmea, Real time kinematic RTK, rtcm messages

I'm looking for a skilled 3D designer to create a custom case for my ESP32 WROOM-32 based IoT device. This device will be used for smart appliance control, so the case needs to be practical and functional for this purpose. Requirements: - The case should be designed for a phone, laptop, or tablet. - It should accommodate the specific components of an ESP32 WROOM-32. - Design should be suitable for an IoT device. - The final product should be a 3D design ready for printing. -it should be able to store two 18650 batteries -Rasberry pico 1W board -bread board and it uses M2.5 screws Ideal skills and experience: - Proficient in 3D design software. - Previous experience designing cases for electronic components. - Understanding of IoT devices and smart appliance control. ...

...as required to fix bugs and update app to work on future OS version releases. Candidate Requirements: - Proven experience developing Android & iOS apps. - Familiarity with WiFi-based device connections. - Expertise in media management and camera integration. - Ability to handle two-user scenarios (remote control via APP). - Experience in designing intuitive and visually appealing UI (buttons, graphics, etc.). - Ongoing support for bug fixes and future updates. Key App Requirements: - Power and light control. - Functional controls. - Activate/deactivate some hardware functions and settings. - Manage WIFI connection between app/phone/hardware. - App should have photo/video controls: take photo, start/stop video, rapid burst photos, zoom/in out. - Editing ...

I need a register and log in system made in PHP - HTML, and a user dasboard is required for logged in users. The user should be able to create random serial keys and edit these keys in the dashboard. (several button functions) A ready-made system can be used. It may be something simple and not important in the design.

Requirements and Features: - I am open to suggestions for specific requirements and features for the firmware. - The firmware should be optimized for gaming purposes. - The emulated firmware can be from a sound card, a wifi card... i am open to suggestions Ideal Skills and Experience: - Strong knowledge and experience in developing custom firmware for DMA cards, specifically PCILeech (Lambdaconcept). - Familiarity with EAC, BE, Faceit, and Vanguard anti-cheats. - Understanding of gaming requirements and optimizations for firmware development. If you have the skills and experience required for this project, please submit your proposal with relevant examples of previous work.

I need a detailed MOVIE NARRATION script in TELUGU for my YouTube video, based on the "Serial Teachers" movie released in 2013. The script should present a humorous tone, narrating the entire story from start to finish. Key Requirements: - The script must include key character dialogues, not just scene summaries. - The focus solely needs to be on narrating the movie's story, without background information about the movie. - The script must have at least 20 minutes of content. Ideal Skills and Experience: - Proficiency in Telugu, with the ability to write a humorous script. - The ability to watch and understand movies in detail. - Experience in scriptwriting, particularly for video content. - Ability to incorporate character dialogues seamlessly into the narration. ...

I'm looking for a professional with PCB design experience to create a PCB for an ARM based IoT controller. This controller is intended for security systems, and will interface with RFID readers, QR scanners, ticket printers, payment terminals as well as door sensors, relays for door locks, and various serial interfaces. Key Requirements: - Design for 8 alarm inputs and 4 relay outputs - Up to 4 RS-485 and RS-232 serial interfaces for external RFID readers - Ethernet interface - 2 x USB interface - LCD controller for a 7 inch display The power supply for this IoT controller will be 24VDC and will require external Power supply with battery backup, so experience with low-power design is a plus. The PCB should be compact and efficient to fit into a typical security system ...

I need a script developed for my ESP32-S3 DevKitC-1 module to monitor the battery health. This includes tracking the battery charge, discharge or full charge. Additionally, I would like to read the battery charge level. The aim of this project is to enable battery health monitoring using the "ESP32-S3 DevKitC-1 WROOM-1 N16R8 16MB FLASH WiFi Bluetooth" module. A HID compliant UPS is connected to the USB-C port on the ESP32-S3 module module Ideal Skills: - Knowledge of Arduino programming - Experience with ESP32 modules - Knowledge of battery health monitoring systems - Experience with serial communication protocols - Expertise in low power consumption optimization The script should integrate seamlessly with existing hardware and provi...

I'm seeking a skilled professional to create a seamless bridge between Zoho Books and PowerBi, focusing on sales data. Key Requirements: - Synchronization of sales data from Zoho Books to PowerBi every 2 hours. Two Books organisations. - Emphasis on tracking specific sales metrics: Revenue figures, Sales by product, Customer demographics Ideal Skills and Experience: - Proven experience in integrating Zoho Books with PowerBi - Strong understanding of sales metrics and data analysis - Ability to set up a reliable, scheduled data sync

...only respond if you have the experience needed & do not private message me **** I'm seeking an experienced IoT engineer to design and implement a Zigbee DC voltage sensor and a corresponding Zigbee hub. The hub must have the capability to connect to both WiFi and Ethernet, and it should support the MQTT protocol in addition to Zigbee. Key Requirements: - The Zigbee DC voltage sensor needs to monitor 2 DC voltage levels and send alerts when voltage thresholds are crossed. - The Zigbee hub must connect to the sensors via Zigbee and both WiFi and Ethernet, ensuring versatile connectivity. - The sensor and hub should support the MQTT protocol, allowing for effective message queuing and delivery. Ideal Skills: - Extensive experience in IoT and embedded systems - Ex...

Tôi tên Kiên (1994) hiện đang làm việc tại Nhật ! Lĩnh vực viễn thông về sim - wifi hỗ trợ cho khách nước ngoài chủ yếu là người Việt Nam ! Tôi muốn phát triển và quảng bá hình ảnh Công ty tới người việt nam nói chung , tới du học sinh , thực tập sinh , và những bạn đang có visa hợp pháp đang làm việc tại Nhật nói riêng Quỹ thời gian của tôi dành cho việc edit video và lên content vẫn đang có chút khó khăn ! Nên tôi đang cần 1 bạn hoặc 1 đội ngũ hỗ trợ content edit video để có thể quảng bá được công ty đến với mọi người nhiều hơn. Xin chân thành cảm ơn...

I'm looking for a skilled freelancer who can write code for an Arduino to control a DC Motor using a DRV8234 Motor Driver over I2C. The code should allow for both spee...allow for both speed and direction control, as well as incorporating encoder feedback for motor control. Datasheet: 1 I have the RTE 3*3mm package soldered on the breakout board. I have esp32 dev module, i2c connections are done. Ideal Skills: - Proficient in Arduino programming - Previous experience with DRV8234 Motor Driver - Understanding of I2C communication protocol - Familiarity with using encoders for feedback

I am seeking a programmer with expertise in the ESP32-S3 microcontroller to help control various peripherals on a PCB. The microcontroller will be responsible for managing the emission of a scalar field, including frequency and timing. Key Responsibilities: - Program the ESP32-S3 for appropriate control functions - Ensure synchronization of scalar field emission - Optimize control for various PCB peripherals Ideal Skills: - Proficient in ESP32-S3 microcontroller programming - Experience with PCB peripheral control - Knowledge of scalar field emission and timing - Familiarity with frequency modulation

...in photo (on left ) in blue shirt with the bridge and opera house in the background (2nd picture) Ideal Skills and Experience: - Proficient in photo editing software - Experience in photo merging and enhancement - Attention to detail to ensure a natural look - Ability to perform accurate color correction to ensure uniformity across images. - Proficiency in techniques that ensure seamless blending of different photo elements. - Experience in manipulating and adjusting backgrounds to enhance the merged photo. Please use the specific background provided for the merged photo. The final image should be delivered in JPEG format. Please refer to the provided sketch for positioning directions. **** Please put just the girl on left in photo with the bridge and opera house in back...

BLE GATT custom profile for ESP32 WROOM I need help for developing a 2 pass data exchange between 2 ESP32 devices using BLE. We can assume that the client has found the server and connected to it. No security features are required. Reference projects for gatt_client and gatt_server are available on the ESP website. Flow: An application running on the client (device) writes data into a buffer and passes control to the gatt_client. The gatt_client sends the content of a buffer to the gatt_server and waits for response. The gatt_server receives the data, does some processing and sends the result (content of a buffer) to the client. The gatt_client receives the data and passes the data to the application. The focus of this project is on the communication protocol between the gatt...

I need a PCB designed for prototyping and testing. The board will include some solid-state relays and an ESP32. The primary function of the ESP32 will be to handle the automation of a kitchen freezer. Ideal Skills: - Expertise in PCB design - Familiarity with solid-state relays - Extensive experience with ESP32 - Prototyping and testing skills Key Tasks: - Design a straightforward but efficient PCB - Integrate solid-state relays onto the PCB - Ensure the ESP32 is programmed for kitchen freezer automation - Deliver a prototype ready for testing Include temperature monitoring capability. Power source will be AC power. Integrate a display screen for user interface.

Recently, my MacBook was stolen, and I require your expertise to help track its current location or any information that can lead to its recovery. I have the device's serial number and any additional details required to verify my ownership and facilitate tracking. I need you to assist with the process. Please let me know what details you would need to proceed.

Battery capacity values ​​must be readable from the serial monitor with ESP32. We want to be able to read the values ​​in the attached photo.

...smart home technology are needed. The MEP Detailed Design should cover the following systems:   * Electrical Systems: * Lighting points and distribution only (Consider a distribution of 16W or 18W LED fixtures for load calculation. We will provide our design later, to update the lighting layout) * Power * Earthing (Lightning Protection not required) * Fire Alarm * CCTV * Telecom and Data (Include WiFi coverage for the villas) * IPTV * Video Intercom System * Exclude the design of Cinema and BGM systems, but take into consideration the power requirement for these systems. * HVAC Systems: * Ventilation i.    Separate exhaust system for each kitchen and toilet ii.    High-Capacity Air circulation and exhaust for basement accomm...

Por favor, regístrate o inicia sesión para ver los detalles.

I'm looking to connect 3 pressure sensors, 4 switches, and 2 relay outputs to Blynk using an ESP32-C6-DevKitC-1. The relays will be controlled manually through blynk app. Key Requirements: - Provide code for this setup - Create visual instructions for Blynk for each input & output

I'm looking for a seasoned developer with extensive experience in Twain Direct. The project involves integrating a scanner into a JavaScript-based web application using the Twain Direct Bridge. Key Requirements: - Document scanning functionality - Integration with a JavaScript/Node.js platform - Support for 'twain' scanning Ideal Skills: - Proficient in JavaScript - Extensive knowledge and experience with Twain Direct - Previous experience with scanner integration projects.

I'm looking for a custom website tailored for selling decking materials. This platform should not only facilitate project collaborations but also serve as a go-to for buyers searching for the ideal outdoor materials. Key Requirements: - The primary focus of the platform is to bridge the gap between project creators and developers. - The main users of the platform would be buyers, so the interface must be intuitive and user-friendly. - The platform needs to have robust e-commerce capabilities for seamless transactions. Key Functionalities for Buyers: - A comprehensive search feature to locate specific materials. - Access to detailed specifications for each material, enabling informed choices. - A direct communication line with sellers for inquiries and negotiations. - A sectio...

...cross-platform mobile app for my Brest pump brand. The app should control the pump via Bluetooth or WiFi and support both iOS and Android platforms. Key Features: - Control Pump Settings: Users should be able to adjust the pump's settings through the app. - Track Usage History: The app should keep a log of the pump's usage for health tracking purposes. - Provide Maintenance Alerts: The app should notify users when maintenance is required. User Accounts: - I'm currently unsure whether the app should have user accounts or just a simple access. I'm open to suggestions based on what would make the app most user-friendly and effective. Ideal skills for this project include mobile app development, Bluetooth and WiFi integration, and experience with creat...

...rechargeable battery. The redesigned board should prioritize long battery life to ensure prolonged use time. The redesigned board should be optimized for use as assistive technology for visually impaired individuals. The redesigned board can have flexible dimensions within a specified range for optimal fitting within the smart glasses frame. The wireless communication protocol should be Bluetooth and WiFi (if possible). 5cm x 10cm The redesigned board should weigh between 10 to 20 grams. The primary focus should be on text recognition for the visually impaired. 4-6 hours Primary focus should be on reducing the size of the board as much as possible....

...Instructions: You will use the YoYoFactory Certificate of Authenticity as a reference and make the following adjustments: Replace Text & Elements: "Genuine Product of YoYoFactory" → Replace with "Genuine Product of Kaizen YoYo." Replace the YoYoFactory logo with the Kaizen YoYo logo (attached). Keep the Following Elements: "Certificate of Authenticity" header. Model Name: Leave a blank space. Serial Number: Leave a blank space. Replace: "Your yo-yo has been machined with premium materials and precise tolerances for a lifetime of enjoyment." With: "This YoYo is the result of years of design experience, bringing you the most elegant product possible." Established Info: Add: "Established in Honolulu, Hawaii, 2024....

...competent developer who can create a Power Virtual Agent (PVA) based chatbot for me. This chatbot will be designed to search for asset details, specifically through IP addresses and Serial Numbers (SN). Key Features: - The chatbot should initiate the conversation with: "Please enter the serial number or the IP address" - The chatbot will access a comprehensive database which includes fields such as: Location, hostname, OS, Row and Rack, EOL, EOS, Status (prod, testbed, decom), Element, Owner, type (server, storage, switch), remark. - The expected outcomes of the search will include: Hostname, ip address, Serial number, Element, OS, Status, Type, Model, Location, Row and Rack, EOL/EOS, Remark. Integration: - This chatbot needs to be integrated with a mess...

I need a PowerApps form for service orders, integrated within my SharePoint site. Key Requirements: - Develop a form to capture service orders, specifically customer information and service details. - Ensure the form is accessible directly from our SharePoint site. - Serialize service order serial number - Capture customer signature - Send copy of filled form to customer by email or whatsapp - Ensure that the form is fully functional and user-friendly on mobile devices. - File filled Form in Sharepoint Ideal Candidate: - Proficient in PowerApps and SharePoint. - Experience in developing interactive forms for data collection. - Understanding of best practices for user-friendly SharePoint integration. The form should use our corporate branding.

I'm seeking a circuit de...potentially enhance core features. Please share your portfolio or relevant past projects. Your experience will be a key factor in the selection process. The customized board should support USB charging. The customized board will be used in text scanning application. The customized board should be powered by a Li-Po battery. The circuit design should be created using any platform. Please include WiFi/Bluetooth connectivity. The customized board should support a battery life of 4-6 hours. Focus on dimensions enhancement of core features while adapting the hardware to the specified size and functionality. Please prioritize enhancing the camera functionality. The customized board should have a double layer component layout. The circuit design should be ...

As a card game enthusiast, I am in need of a logo for my Bridge club. This logo should incorporate the name of the club, an iconic image from Boise, ID, and some playing cards - all in a fun and playful style. Key Requirements: - Incorporate the name of the club prominently in the design. - Use an iconic image of Boise, ID. - Include elements of playing cards. - Design in a fun and playful style, not too serious or rigid. Color Preferences: - The logo should use a combination of bright and vibrant colors mixed with subtle and muted colors. This balance should create a visually appealing logo that stands out but isn't overly flashy. Ideal Skills: - Graphic Design - Logo Design - Experience with playful and fun designs - Ability to incorporate specific imagery and elements int...

I'm looking for an experienced programmer proficient in C and familiar with ESP32. The primary goal of this project is to develop an IoT device. Key Features: - The device should be able to collect data from various sensors, specifically a temperature sensor, a flow meter sensor and a barcode scanner. - It should also support remote control and automation features. Ideal Candidate: The perfect freelancer for this job should have a strong background in IoT device development and ESP32 programming. Experience with sensor integration and remote control systems is a plus. The device should use Wi-Fi for communication. The device should support web-based remote control functionality. The IoT device should be mains powered. The IoT device will be designed for industrial mo...

I'm seeking a professional who can design a wireless transmitter for a miniaturized water pressure and temperature sensor (less than 1 mm long). The sensor needs to be integrated into a full Wheatstone bridge and likely requires an amplifier. Key tasks: - Design a circuit that reads signals from the sensor and calculates pressure and temperature. - Ensure data is wirelessly transmitted to a PC for real-time plotting using LabView. The transmitter will be battery-powered. The ideal freelancer should have: - Proficiency in circuit design and wireless communication. - Experience/Certification in LabView. - Knowledge of miniaturized sensor integration. Please note, I left the choice of wireless communication method open - I'm hoping for your expertise to guide this decisio...

I require a skilled professional to convert and scale a 4-20 Ma signal into a serial output. This output is necessary for interfacing with a remote display in a process control system. Setup will be controlled with a microchip and LCD display. I have provided a partial schematic showing some required parts and pin locations as well as a partial PCB with required footprint to work with existing serial device. Full Project description attached. Key deliverables: - Conversion and scaling of the 4-20 Ma signal into a serial output for process control. - I am flexible on what micro processor is used, but I will need full details on what program/ hardware I will need to program firmware -Need someone knowledgeable on what filters or circuit protections should be added -...