Espruino esp8266 Jobs

El trabajo consiste desarroyar un pequeño programa en el arduino y el modulo Esp8266 , para que via wifi de un pulso a un rele, en modo AP conexion directa entre el movil y el arduino, y desarroyar una pequeña aplicacion en android e IOS para controlarlo

El trabajo consiste en programar el arduino uno y el modulo Esp8266 Esp-05, para que funcione via wifi con un aplicacion sencilla en android que tambien hay que desarrollar y de un pulso al rele para abrir y cerrar una puerta

I have been working to develop an IoT datalogger based on the Arduino platform, I have several separate projects which I would like to merge into a single solution. I intent to use the following components: - OLED - BLE nRF8001 - WiFi ESP8266 - Sound CODEC - SD Card (Data logging and reflash device capabilities) - Sensor I2C board - 2xAnalogue sensors -IR LED Sensor (IR Remote control) -RGB LED stip All the above components work with individually and now I want to pull them together into a single design and looking for someone that can support understanding the hardware and how multiple devices can be connected to the Arduino Teensy 3.2 board. I think the biggest problem will be the OLED, BLE, Sound Codec devices as there use the SPI bus and not sure how to connect mult...

Hello, I would like to built-in a web-server on the ESP8266 module that will have Box fields to set Port number, IP address, AP-STA mode, Password, and so on. Also I would like to add two buttons for Turning ON/OFF the GPIOS of this module and also if possible set a automation Field box to set a time for turning ON/OFF as well. For more Info please contact me at skype: Marlon

Hello, I would like to built-in a web-server on the ESP8266 module that will have Box fields to set Port number, IP address, AP-STA mode, Password, and so on. Also I would like to add two buttons for Turning ON/OFF the GPIOS of this module and also if possible set a automation Field box to set a time for turning ON/OFF as well. For more Info please contact me at skype: Marlon

preface Not all documents available in English. Depending on whether we can fin...English. Depending on whether we can find a suitable partner, we will translate the documents and provide it. Quick Overview of the project: The task is to design a battery powered solution based on the ESP8266 (ESP-12 E / F). This is about the hardware design. Request to the finished design: - Operating with a 1.5V battery AA (step up converter) - Very energy-saving design (at least 2000 cycles with a battery: press the button, connect to wifi, send a datagram, sleep mode) - Total component cost under 5USD in series production - Debounced button with interrupt which can wake the ESP8266 from the sleep mode - Controllable RGB LED - RoHS and EMC for UL & CE Please provide ref...

我有进行中的、与之前的项目相关的工作parsing jsonarray using Arduino mega with esp8266-12 '

Hi I need help with a project based on Arduino+ Esp8266. My project is Wireless Health Monitoring System. I need some help with software implementation & PCB. Please let me know if you can do it. Then I can send you the project details and we can go over the payment as well. I am new in freelancer, so I am not sure how price works. Please let me know

Hardware: Arduino UNO, Sparkfun WiFi Sheild () The goal is to read and parse JSON () in the serial monitor. Please mention if you have experience with ESP8266 or not and how you plan to debug.

I am in a hurry, the deadline is ahead. I need to parse a json array from a webserver, and turn things on/off according to the parsed result. The Arduino program should contain the following sections: wifi connection, server connection, parse jsonarray, operation(you can set up simple pin to high/low, I have the code for this part)....

Команда разработчиков ищет единомышленников для создания IoT устройств

We are making a wifi display device which has an e ink display and the huzzah esp8266 board. the eink display is from We are looking for an hourly consultancy basis for the project.

Very simple project. Write a code to send GCM based notifications from ESP8266 once the GPIO pin goes high or low. - Config wifi connection from a url - Connect to specific device - Get notifications from the device Thanks.

I need a sensor to interface onto a project of mine that requires both weight and temperature to be transmitted via Wifi Ideally I need a ESP8266 (or some wifi device) connected to an Hx711 (with 2 x 20kg load cells) and a Ds18B20 temperature sensor. This needs to upload the weight at regular intervals (30 min) and ideally have a sleep function to keep the power down. 3.3V is the power design spec The post needs to publish data via MQTT to a broker and utilse a function of the ESP MAC address to create a unique address so that multiple sensors will publish unique messages. Any questions, please feel free to reach out.

I need a circuit with basic code to communicate between two Arduinos wirelessly. The transceiver to be used is specifically ESP8266 wifi module, also known as ESP-01. The code should be able to send an array through the specified transceiver. If someone can provide me, please contact with the price. Opensource codes are also welcome.

The app must be able to connect to ESP8266 (WiFi module) via WiFi Router. we need to send basic commands and send & receive sensor data from the device using WiFi. in addition we need to create a widget to place on the homescreen for quick access.

hello there, i am trying to get some arduino programming done, i have a esp12f iot module, i already configured my arduino software to connect and flash to esp8266 module, i need someones help to write a arduino program for this scenario : the esp8266 works as a iot system there is a stove on a remote location, every time the user ignites the stove the thermal switch on the stove sends a signal to esp module to inform that user has ignited the stove and vice versa. if it is not connected to internet it should log the data and when the internet is available it should upload the data, i heard that esp modules don't have inbuilt real time clock, if so, it should update time from internet i would like to use service to get the dataonline as this is a simple program,...

I have ESP8266 prosejkt i have asso a TSS721 mbus card Need to help me answer questions and to come in as expert and help me with the setup mbus data. I need to know TSS721 card.

I need help building prototype board using following components: ESP8266 NodeMCU 12E v1.0 PIR Motion Sensor HC-SR501 Temperature and Humidity Sensor DHT11/DHT22 Power: Input from 9v battery Programming: Arduino IDE Size: Components need to fit on small board - 68mm x 53mm or less Provisions: If possible, I should be able to change GPIO pins on ESP connecting to Sensors Currently, I have this working on breadboard.

hi. are you expert on ESP8266? i need help to install firwmare from Windows. Can you help?

I need a web based code for ESP8266. It ahould be able to upload a file, remove a file, compile/run a file, read controller status and reboot the controller on an ESP8266. Basically i should be able to do everything wirelessly using a internet. There are lot of tutorials available online for this and for a person familier with ESP8266 will know its not that diffiult yo follow. Search "OTP ESP Wi-Fi File management" on google to see bunch of readly available code. Or you can check this But please make sure you provide the complete code with instruction leading to the end requested result.

i want to do a small project with arduino and to send information to my laptop with wifi ( ESP8266) AND TO POST A CURVE PLZ ANSWAER ME THANX

I Would like to design a simple PCB for relay board along with ESP8266 Wi-Fi Module.

i want to do a small project with arduino and to send information to my laptop with wifi ( ESP8266) AND TO POST A CURVE PLZ ANSWAER ME THANX

The app has only the consept and to go to a beta stat. I lik3 you to make me an offer for all the spesigications detaild below. Sher button for facebook whatsup Play video over android and ios non full screen. Puse play mute buttens for the video. Screen alining to center of closet panel. There is a need of a server that will hendel the comunication betwin the app and an esp8266 that have a simple function of blink for 5 seconds. We need the server to monitor and save data for each claint like buttons reased and time of use

Hello, I need to create a WEB-SERVER for the ESP8266 WIFImodule and this web-page will have box fields to set a time for automation and SMS field as well for sending notifications. Lets chat on Skype: NMarlon

Use arduino and available hardware to create a wireless led light pods game that turn off with a hand wave. This is a reaction time game. 8 wireless pods light up in a random pattern, the player waves their hand over the lighted pod to turn it off, the software calculates the reaction time and plots to a graph. Idea is to use either adafruit bluetooth le feather board, or huzzah esp8266 wifi board, or radio frequency (whatever is best) with a proximity sensor, or capacitive touch sensor (or code such as capsense) to find the distance and turn the light off when the hand is waved over. The pods would be arranged on a table or on a wall and an app would have the game software to start a new game . each time the player would test their reactions on a specific routine and have a graph ...

I would like to get software developed for the ESP8266 chip, ESP-12E module. The software should do the following: a) in config mode, be its own access point so a client can connect with a browser to it (no security) to configure the unit. Config mode is selected by IO pin. Configuration parameters include wifi parameters, callback URL, callback interval (16bit integer), counter or alarm mode b) in operation mode, the parameters configured in (a) (config mode), which includes SSID, WPA key etc, will be used to connect to the network as a client. After successful startup, the device will send an http request to the callback url with parameter "RESET" (either HTTP get or HTTP post, RESET=1). In operation "counter", the device will count I/O changes on one I...

protype type desgin hardeware ESP8266, POE, MBUS,

Phase 1: Program ESP8266 12E NodeMCU to upload data on web server when PIR Motion Sensor triggers. ESP8266 12E NodeMCU and PIR Sensor can be provided for this project. This project will be in multiple phases. I will give next phase only if phase 1 is delivered successfully.

IoT project for ESP8266 to manage RGB leds

Witam Potrzebuję zmienić funkcjonowanie gotowego kodu, który jest napisany dla modułu ESP8266, konkretnie chodzi o projekt z poniższego linku: Jest to prosty sterownik, który umożliwia włączanie lub wyłączanie np. światła przy pomocy strony WWW oraz manualnie poprzez chwilowe naciśnięcie przycisku. W tej chwili układ działa tak, że jak się naciśnie przycisk to albo włączamy albo wyłączamy przekaźnik - jednocześnie zmiana (statusu) zapisywana jest na stronie WWW i dzięki temu zdalnie widać, czy dane urządzenie zostało włączone lub wyłączone. Natomiast ja potrzebuję aby po przyciśnięciu przycisku zmieniał się tylko i wyłącznie status na stronie, bez działania przekaźnika

Build a IR Universal Remote control using ESP8266. It must be able to receive messages from a remote, to record key presses, and then send the message. Needs to be able to record remote keys for more then one remote: TV, home threather, etc.

Retro-engineer a motherboard. We need you to provide us the electric scheme that is on the board and extract the programm that is actually running on the ESP8266 board. Please return the mlb after the work is finished. If this offer seems interesting to you please mention if, write "hello" in French.

Interface esp8266 wifi module with arduino uno, we require to transmit the data from one wifi module and receive at other wifi module and vice versa to control the led. If i send a character 'a' the led should on and if send 'b' the led should off. This my requirement it should happen at other device also.

Develop software for esp8266 using SPI to read data from energy monitoring chip, upload data to web server

I need an ESP8266 working with Arduino Mega 2560 implementing the WifiManager library () for Autoconnect, and implement two methods to communicate with a Web Service (POST - JSON) back and forth (GET - JSON).

I need an android app that will connect to power socket based on the ESP8266ex SoC. The app functionalities are: 1. Scan and connect to available power sockets in the network; 2. On/Off control of the power socket; 3. Timer feature: define on/off date and time, like an alarm clock;

We are developing a simple IoT Platform based on ESP8266 hardware, mySQL database and PHP. Main functions are: datalogging of analog input, digital input and counter. Data trasmission via WiFi and local webserver for parameters. Part of the job has been done and should be completed. This is going to be a continuing job with website maintenance and online assistance to users.

I need to design small black boxes that incorporate any combo of the following: PIC18F25K22 MICRO SD card LSM6DS3 MTK3339 Esp8266 Esp-12 Ws2812b User gui would be: webpage windows app smartphone app

The target is to use a ESP8266 ESP12 (or nodemcu) to manage 8 digital gpio from internet. To do that we want use in the first step the site like mqtt broker, but we don't know if ssl is possible with ESP8266. If not the freelancer must define an alternative to provide more secure websocket than the plain text. If there is the solution with SSL without , we prefer this solution, but the freelancer must provide detailed instructions in english of the server side. If you can't manage it with ESP, you can use dragino HE like mcu (openwrt) NOT Arduino o raspberry PI

I need to create a project for esp8266 that read some sensor data and send them to an IOT server. What is needed: On 1st startup (or after reset by setting low a pin) the module will be in AP mode (no security). A device (like mobile phone) can connect to this AP and setup the following parameters : SSID to connect to Password of the above SSID Update period in secs (how often the device will send data to server) Address1,Address2: (GET/POST addresses and string data to send to server) example : values like temperature and humidity will be taken from the sensor we use. Currently will support DHT22 sensor for above data. Next we'll use some other sensors I have, to obtain wind speed and direction. The scope of this

the project is a "simple" doorbell hacking made with a ESP8266. project: 2 x ESP-07/12 ESP1: connected with one pin to the doorbell ESP2: located on a second floor features: - when the doorbell is used, the ESP1 must send a notification to ios or android (considering IFTTT channel too) - after that , it must blink a led on a second esp8266. - the second ESP must play a buzzer - from my smartphone i can open the door or ring the doorbell to do that i want a public FREE service (like BLYNK for ex.). Arduino IDE must be used for this project. This is an educational project, so it needs the explanation in the code

I need a gerber/kicad design that can be sent to a fabricator to create a Wifi enabled system using ESP8266, Atmel 90E24 Energy monitor chip and a relay to remotely control an appliance and monitor its energy usage. I have a reference design that I have found on the internet and that can be used as a starting point, if needed.

I need a gerber/kicad design that can be sent to a fabricator to create a Wifi enabled system using ESP8266, Atmel 90E24 Energy monitor chip and a relay to remotely control an appliance and monitor its energy usage. I have a reference design that I have found on the internet and that can be used as a starting point, if needed.

Design hardware+software using ESP8266 module to receive streaming audio over wifi, sent from iOS/ANDROID smartphone. It must use any standard open-source protocols.

An simple APP for mobile and working with ESP8266, details will talk with the right person.

The project involves development of a product that uses the ESP8266 Wifi Module with microcontroller operating with ARDUINO sketch. If you have experience with this MODULE, please apply, otherwise please dont waste time. The product will require development of some hardware with some sensors, incorporating some AUDIO decoding using AIRPLAY.

I need a complete WIFI AUDIO RECEIVER built using the ESP12F (esp8266 variant) wifi module. It should be AIRPLAY / DLNA compliant, so that it receives audio at high quality from ANDROID/iOS/WIN/OSX devices over wifi. The device should be LITHIUM battery operated, with USB recharging.

I would like to have a complete hardware+software solution using ESP12F wifi module (it is latest version of ESP8266) which can receive up to 8 audio channels over wifi, at VOICE QUALITY (MONO, 64K) and output to headphone jack. The audio will be from LIVE mics, and can be transmitted from a PC/MAC, and you can define how that would happen. The receiver (esp12f) should be able to select the channel (1 to 8) and output it to the headphone attached. The device should operte on LITHIUM battery, usb rechargeable. Let me know if any questions. Thanks Manoj Sabnani