Rtos firmwarepráce

We need an hardware and firmware developer for an IoT module that can communicate via WLAN and at the same time enable bidirectional communication with an RS485-based system. The module should provide a web interface for configuring the network and be operated via a 24V AC power supply.

I need assistance updating the firmware on my Xiaomi Rednii TV A75 to English. Requirements: - Language customization - App installation Netflix, YouTube ,AppStore etc - System optimization I do not have access to the necessary files for the update, so I will need help obtaining them. The ideal freelancer for this job should have experience with Xiaomi TVs, firmware updates, and system optimizations.

I'm working on an IoT device for electric vehicle (EV) and swap stations. I'm in urgent need of a Hardware and Firmware engineer with IoT experience.

...my IoT asset tracking device. The primary focus is on reducing power consumption, with additional attention to stability of connection and responsiveness of the device. Key areas of improvement: - Firmware optimization: Help me refine the device's firmware to reduce power usage. This will include code refactoring and algorithm optimization. - Sleep mode implementation: Develop and integrate effective sleep modes to further decrease power consumption during idle periods. Ideal candidates will have: - Extensive experience with IoT devices and their communication stacks. - Proficiency in firmware optimization and implementing sleep modes. - Skills in code refactoring and algorithm optimization. - Knowledge of techniques to enhance device stability and responsive...

I need a tailored Raspberry Pi 4 distro for use as a MIDI / Audio device. This minimal setup should support essential audio functionalities including MIDI processing and audio playback. The firmware must be optimized for low-latency and high-performance audio. Key requirements: - The distro must include JUCE and Fluidsynth, which are preferred for MIDI processing. - The setup should be as lightweight as possible to maximize performance. - Experience with Raspberry Pi, audio processing, and Linux-based systems is crucial. - Prior work on similar projects will be highly regarded. The ideal candidate for this project is a seasoned professional with a strong background in audio software and embedded systems. Your expertise will help me create a powerful, yet cost-effective audio solu...

I am encountering a significant issue with my HP SAN storage where a hard disk is not being detected. Despite having checked all physical connections, restarting the SAN, and updating all firmware and drivers, the problem persists. I am in need of a seasoned Storage System Engineer who can diagnose and resolve this problem. Ideal candidates should have: - Extensive experience with HP SAN storage systems - Strong skills in fault diagnosis and resolution in storage systems - Knowledge of storage system engineering principles If you have the necessary expertise and experience, I would appreciate your assistance in getting this problem sorted.

...or Active-HDL/Riviera. Additional Skills (Considered a Plus): Expertise in synthesis and implementation processes. Proficiency in Tcl scripting for automation and tool customization. Experience with debugging and testing using tools like ILA (Integrated Logic Analyzer), SignalTap, or similar. Familiarity with embedded software development, including: Writing bare-metal C/C++ for testing Zynq firmware. Developing or customizing a complete PetaLinux OS. Soft Skills: Strong problem-solving skills and a detail-oriented approach. Ability to manage multiple tasks and meet tight deadlines. Proactive in learning and adapting to new technologies. If you have expertise in any of the additional skills listed, we may have tasks suited to your capabilities. While this is a flexible posit...

I'm looking for a skilled MP lab programmer to assist with programming a PIC microcontroller. The project involves implementing multiple functionalities, including sensor interfacing, communication protocols, and motor control. Key Requirements: - Extensive experience in microcontroller p...microcontroller programming, specifically with PIC. - Proficient in sensor interfacing, communication protocols, and motor control. - Ability to understand and execute complex programming tasks. - Strong problem-solving skills for potential debugging and testing challenges. Your task will primarily be focused on microcontroller programming, with the possibility of needing to debug, test, and develop firmware. The project will involve programming, debugging, and testing the PIC18F series m...

I need a skilled developer to modify Android firmware on Samsung Galaxy series smartphones or Google Pixel smartphones. The modifications should enable monitor mode and optimize Channel State Information (CSI) extraction. Main Tasks: - Modify Android firmware to enable monitor mode. - Enable and refine the process of extracting Channel State Information (CSI). Additionally, I need you to develop a solution to transmit the extracted CSI data to the application layer for further analysis. This project is primarily for research and development purposes. Therefore, a strong understanding of network diagnostics and security analysis could be beneficial. Ideal skills and experiences for this job include: - Proficient in Android firmware modification. - Experience with ...

I'm looking for a skilled developer with extensive experience in embedded systems and NFC application development on STM32. The hardware design has already been completed. The project involves a considerable amount of work (300-400 hours), focusing on: - Creating firmware for an STM32 microcontroller. - Implementing NFC application functionalities, specifically for data exchange and communication. The ideal candidate should have: - Proven experience in STM32 firmware development. - Proficiency in creating NFC applications. - Ability to adhere to specified project requirements and standards. - Knowledge of low-power design techniques for battery-operated systems. Please note, an NDA will need to be signed before the project starts. A brief interview will be conducted,...

...implementing an IoT system for conveyor control using the ESP32. - Ensuring the system is robust and suitable for industrial use. - Providing clear documentation and support for the system. Ideal Skills: - Extensive experience with IoT projects, particularly using the ESP32. - Strong background in industrial automation. - Proficiency in designing systems for machinery control. - Experience in firmware development for ESP32-based systems. - Background in electrical engineering, particularly in designing and troubleshooting industrial circuits. - Proficiency in developing real-time systems for automated machinery. - Experience with integrating IoT systems with cloud platforms for data analytics and monitoring. - Skills in integrating various sensors with ESP32 for monitoring conve...

I am seeking an experienced professional with a strong background in IoT device security and firmware development to implement flash encryption on my ESP32 device. The main goal is to prevent unauthorized access to the firmware. Tasks: - Apply flash encryption on the existing firmware to enhance its security and prevent unauthorized access. - Devise a method for generating encryption keys directly on the device. Ideal Skills: - Extensive experience with ESP32 and its security features. - Proficient in firmware development and modification. - Knowledgeable in encryption techniques and key generation methods. Keys should be generated directly on the device to ensure maximal security.

ATTN: Candidates need to be in Hong Kong or Guangdong Province, China a. Provide 7 x 24 BAU support on 1 firewall b. Provide on-site support if necessary - Add/Remove/Modify firewall rule c. Audit and evaluation of logs and activity d. Change implementation e. Handle incident f. Problem management g. Performance monitoring h. Prepare sta...be in Hong Kong or Guangdong Province, China a. Provide 7 x 24 BAU support on 1 firewall b. Provide on-site support if necessary - Add/Remove/Modify firewall rule c. Audit and evaluation of logs and activity d. Change implementation e. Handle incident f. Problem management g. Performance monitoring h. Prepare status report if necessary i. Proactive Security Monitoring j. Network Monitor k. Firmware upgrade L. Handle CSC and other security r...

We have a few Tablets model: MDT7P2-01 Currently as we know is limited to Android 5. We are not sure but seems to be builded by Airlyte. We need someone to build a firmware at least Android 8, but prefer to be Android 10 or later. Updated should allow use of: - Play Store - Camara - WiFi - Touch - SD card And Android common tools. Will prefer to be in spanish. Currently we have a way to upgrade and is as easy as insert the SD card (even been in use), and accept upgrade.  Should give us firmware and detailed instructions on how to upgrade them in an easy way. Please quote me with REAL pricing and time, to know you read this document include tablet model with your quote.

I'm looking for a developer to create a Windows application with a simple and minimalist user interface designed for both video and audio playback in a unique environment. Light control and sensor readings are also needed in the user interface. The application should be compatible with Windows 11. Hardware, firmware, and User Interface will be developed in parallel. Key Requirements: - Design and implement a user-friendly, minimalist and simple interface - Ensure the application supports both audio and video playback for up to 3 cameras and 5 audio channels - Confirm compatibility with Windows 11 - Include basic playback controls like play, pause, stop, forward, and rewind Ideal Skills: - Proficiency in Windows application development - Experience in UI/UX design, specifica...

...completed project should include: - One test device - Firmware - PCB drawings - Manufacturing files - Gerber files - A generic or off the shelf plastic housing for the device - Any other necessary files to complete the device - A simple programming method for the device with the firmware once we proceed with manufacturing, such as USB. - Detailed schematics of the electronic circuits used in the device. - A comprehensive Bill of Materials (BOM) listing all components. - Compliance documentation showing adherence to regulatory standards. - Detailed assembly instructions for putting together the device. - A user manual detailing the operation and troubleshooting of the device. - Source code for the firmware to allow for future modif...

I need a custom px4 that utilizes pre-compiled modules. The PX4 compilation should change behavior to utilize pre-compiled modules and libraries. Key requirements: - Proficiency in GCC toolchain - Experience with px4 firmware and Pixhawk - Ability to modify compilation behavior to use pre-compiled resources. - Proficiency in embedded C/C++ programming languages I will provide the specific pre-compiled modules and libraries to be used.

Project Overview: I am seeking an experienced developer to create firmware/software for a device that connects to a vehicle's OBD-II port and can detect inputs from any button pressed in the car (e.g., steering wheel buttons, dashboard controls). Key Requirements: OBD-II Expertise: Proficient in reading and interpreting OBD-II protocols (CAN bus, ISO 15765-4, etc.). Custom Input Detection: Ability to map and detect specific button inputs transmitted via the vehicle's CAN bus. Device Compatibility: Code should work on a standard microcontroller or a platform like Arduino, Raspberry Pi, or ESP32. Real-time Processing: Ensure low-latency data processing and accurate input detection. Documentation: Provide clear documentation on how the code works and how to integrate the de...

I need help with my IP camera. I'm using a Windows system to connect and plan to use an SDK Tool for flashing the firmware. The goal is to modify the daytime exposure settings of the camera. Ideal Skills: - Proficient in using SDK Tool - Familiarity with IP camera firmware - Experience with daytime exposure settings I appreciate any help to get this done. Basic adjustments to exposure settings are in scope.

I'm seeking an expert in arcade systems to configure the button layout of my standalone arcade joystick console to a classic arcade style. Key Requirements: - Configure the button lay...seeking an expert in arcade systems to configure the button layout of my standalone arcade joystick console to a classic arcade style. Key Requirements: - Configure the button layout to classic arcade style - Understand and implement joystick mapping - Provide advice on potential firmware updates if necessary Ideal Skills: - Extensive knowledge of arcade systems and standalone consoles - Experience in configuring joystick and button layouts - Understanding of classic arcade games and their button layouts - Firmware update experience Please provide examples of similar projects you�...

I'm seeking an expert in arcade systems to configure the button layout of my standalone arcade joystick console to a classic arcade style. Key Requirements: - Configure the button lay...seeking an expert in arcade systems to configure the button layout of my standalone arcade joystick console to a classic arcade style. Key Requirements: - Configure the button layout to classic arcade style - Understand and implement joystick mapping - Provide advice on potential firmware updates if necessary Ideal Skills: - Extensive knowledge of arcade systems and standalone consoles - Experience in configuring joystick and button layouts - Understanding of classic arcade games and their button layouts - Firmware update experience Please provide examples of similar projects you�...

I need STM32 MCU programming expertise to help me monitor and manage environmental sensors over LoRaWAN. The project involves controlling these IoT devices on a scheduled basis and transmitting sensor readings to the Network Server (LNS). The firmware must be compatible with Firmware Over-The-Air updates (FUOTA). Key Responsibilities: - Develop code to control environmental sensors (specifically pressure monitors). - Program STM32 MCU to send alerts based on sensor readings. - Implement functionality to automatically adjust settings based on sensor data. - Create a system for logging data for future review. Ideal Skill Set: - Extensive experience in STM32 MCU programming. - Solid understanding of IoT devices, specifically environmental sensors. - Proficient in programming f...

I'm seeking a skilled professional to design a PCB and firmware for a multichannel thermocouple registrator. Assumptions 1. PCB as small as possible, housing on our side 2. internal flash - approx. 4/8/16gb or other - please advise 3. buttons 3.1 START (recording) 3.2 STOP (recording stop) 3.2 LED light (indicating recording) 3.4 LED light (indicating low battery) 3.5 LED light (indicating full disk/writing error) 3.6 ON/OFF (main button) 4. replaceable battery, preferably a finger or similar - we can make a housing for it 5. 8 channels for thermocouples 6. USB C for reading data (mass disk) 7. 4 screw holes for mounting in the housing 8. buttons and LEDs on Front panel 9. Thermocouple K sockets from top side Functionality 1. START button creates a new *.csv file, with automa...

My 3D printer's motherboard broke, and I've upgraded to the BigTreeTech SKR 3 EZ. I need a professional to build a custom Marlin firmware for this motherboard. Key Requirements: - The firmware must support: - Auto bed leveling - Dual extruder - Touch screen - A touch probe - Thermal protection - A filament runout sensor - The touch probe and dual extruder must be fully functional - The latest version of Marlin must be used Ideal Skills: - Extensive experience with Marlin firmware - Proven track record of working with BigTreeTech motherboards - Strong understanding of 3D printer components - Ability to create custom firmware tailored to specific hardware Your expertise will help me get my printer up and running with all the new ...

Android Firmware Developer Needed for Headless CRDroid Modification Description: We are seeking an experienced Android firmware developer to assist our in-house developer in modifying CRDroid to operate in a headless mode (i.e., without a physical display). The goal is to ensure CRDroid can boot and run without a screen attached, while still supporting screen mirroring via USB or Ethernet for control and monitoring purposes. Our project involves working with Samsung phone motherboards, which are connected to a Windows PC via USB or Ethernet. These devices are used for automation and testing, and it's essential that the solution is stable for long-term operation. Key Tasks: - Modify CRDroid or AOSP to bypass physical display dependencies. - Enable virtual display su...

My HP Nibble Storage Array is experiencing a hardware failure. Both controllers are down and I cannot find any spare parts or a way to fix it. I have tried troubleshooting myself but I'm unable ...controllers are down and I cannot find any spare parts or a way to fix it. I have tried troubleshooting myself but I'm unable to resolve the issue. I need a professional with experience in handling HP Nibble Storage Arrays to assist me. Ideal Skills: - Extensive knowledge of HP Nibble Storage Arrays - Troubleshooting and repair skills - Experience in hardware repair - Experience with performing firmware updates on HP Nibble Storage Arrays - Skills in configuring network settings for storage arrays Please reach out if you can help. The most urgent requirement is remote trouble...

I'm currently developing a project on the ESP32-S3, with firmware development done in VSCode + PlatformIO. However, I've hit a roadblock with the VSCode implementation not supporting ESP32 Secure Boot V2 and flash encryption directly. I'm looking for an expert who can assist with creating a highly secure bootloader that supports USB firmware updates. Key Requirements: - Development of a very secure bootloader capable of supporting firmware updates via USB - Integration of advanced security features into the bootloader - Configuration of ESP32 Secure Boot V2 and flash encryption Ideal Skills and Experience: - Extensive experience with ESP32 and its security features - Proficiency in VSCode and PlatformIO - Proven track record of developing secure bootlo...

...developer specializing in embedded systems, particularly in firmware development for automotive systems. The task involves creating application-specific firmware. Ideal Skills: - Proficient in C programming - Extensive experience in firmware development - Knowledge in automotive systems - Skills in designing application-specific firmware - Understanding of embedded systems - Familiarity with MISRA C guidelines for automotive software. - Experience with CAN bus protocol for in-vehicle communication. Please include examples of your previous work in your bid. The firmware should target the light switch system. The firmware should support "gateway can or lin." ." The primary goal for the firmware is to enable Bluetooth con...

...them to the respective FRITZ! Box. Example: FRITZ! Box registers with the GenieACS with the serial number B0B02308008C, then the values from the file should be read in and sent to the FRITZ! Box. The FRITZ! Box values should also be re-sent if the customer has reset their FRITZ! Box to factory settings. "PUSH procedure" 2. The GenieACS should provide the option of installing a firmware update on the FRITZ! Boxes. 3. If a customer reports a problem with their FRITZ! Box, there should be a way to dial in directly to the FRITZ! Box. This means there should be a button or something similar that can be used to start and close remote maintenance. To do this, the GenieACS must be able to create a user and password in the FRITZ! Box so that you can log into the FRITZ! Box ...

I am looking for an experienced Embedded Systems Developer to assist with upgrading the firmware/software of an existing system, which is based on the ESP32. Key Responsibilities: - Enhance the current firmware/software to support new features - Identify and rectify existing bugs Ideal Skills and Experience: - Proficient in ESP32 programming and firmware development - Experience with power board design - Strong problem-solving skills for bug fixes - Capability to implement new features effectively

I am an internet service provider seeking an experienced firmware developer. The goal is to customize the firmware of various routers (TP-Link, Nokia, SNET, Huawei, Syrotech) to suit my service specifications. Key Requirements: - The firmware should dynamically adjust based on the service name and DNS. - I need a dual-level user system: a main admin and a sub-user. The sub-user should have limited access, specifically, they shouldn't be able to reset the router's main configuration or change the WiFi name and password. - The firmware must support TR-069 for remote push configuration and monitoring. Ideal Skills: - Extensive experience with router firmware customization. - Deep understanding of TR-069 protocol. - Knowledge of the mentioned rout...

...cluster. - Implementation of security best practices and hardening of the VxRail cluster. - Optimization and performance tuning of the VxRail cluster to support VDI workloads efficiently. - Setup and configuration of backup solutions to ensure data protection and disaster recovery. - Implementation of monitoring tools and dashboards to track the health and performance of the cluster. - Regular firmware updates and patch management for the VxRail nodes. - Configuration of storage policies and tiers within the VxRail cluster. - Providing detailed documentation for the setup, configuration, and maintenance of the VxRail cluster. - Conducting failover testing to ensure high availability and redundancy mechanisms are working correctly. - Setup of user roles and access controls within ...

For Milestone 1, your tasks are: Learn the Apollo XP95 Protocol: Study the documentation to understand its requirements, timing, and pulse patterns. Firmware Review: Analyze the existing code for XP95 implementation. Collaborate with the Hardware Engineer: From Day 1, assist the engineer with firmware-related guidance. Integration Plan: Create a plan for firmware updates based on hardware changes. Payment for this trial is $225, funded via Freelancer and released on completion.

Hello. We are running a solar inverter automation service, based on a ESP32 module connected via Modbus. From this we take control of the Solarinverter, and excecute different automations based on time and price. Sadly our good developer has quit and we are looking for new to take on this task. We are at the mentioned step, and next is to build a Online dashboard, meaning our esp fleet should be able to connect to a cloud solution, where costumers an acces remotely(atm they can only access via local) automations can be build, and project can be developed. Ive attached the main scope of work for this project and will share further when we agree.

...architecture). - Work closely with us to finalize and implement the mobile tech stack. - Collaborate on app functionalities, including onboarding flows, custom workout creation, progress tracking, and suggested exercises. What We Provide: - Complete Wireframe and User Journey - UI/UX Design Diagrams: We will share detailed Figma designs and user journey wireframes along with figma prototype. - Firmware Api/SDK  : To integrate IoT Devices via BLE - Initial Database Design : The same will be enriched while working on it. Requirements: - Proven experience in mobile app development (Flutter preferred). - Strong understanding of Bluetooth Low Energy (BLE) integration for IoT devices. - Experience with integrating APIs for real-time data updates. - Familiarity with...

For Milestone 1, your tasks are: Learn the Apollo XP95 Protocol: Study the documentation to understand its requirements, timing, and pulse patterns. Firmware Review: Analyze the existing code for XP95 implementation. Collaborate with the Hardware Engineer: From Day 1, assist the engineer with firmware-related guidance. Integration Plan: Create a plan for firmware updates based on hardware changes. Payment for this trial is $225, funded via Freelancer and released on completion.

I'm looking for an expert who can flash my router with NordVPN. The purpose of this project is to enhance my network-wide privacy, security, and gain access to restricted content. Ideal skills and experience for this job include: - Extensive knowledge of router firmware - Experience with NordVPN setup - Understanding of network privacy and security If you have the right skills and experience, I look forward to your bid. The router is a Netgear model.

I'm looking for an expert in C programming and embedded systems to enhance my existing firmware for the STM32F401CDU6 microcontroller. The firmware was developed using Keil uVision, and the enhancements will focus on adding UART communication capabilities. Key Tasks: - Integrate UART communication protocol into the existing firmware - Ensure the new firmware supports data transmission and reception via UART Ideal Candidate: - Proficient in C programming and embedded systems - Extensive experience with STM32 microcontrollers - In-depth knowledge of integrating communication protocols into firmware - Familiarity with Keil uVision - Able to deliver robust, efficient, and high-quality firmware enhancements

I have customized CR-10S, I have upgrade to direct drive, installed a SKR Mini E3 V3, a BQ microprobe, with x: -44.1 y: -3.3 z: -1.01 offsets. And a BTT TFT35-E3 V3.0.1 Display Touch Screen. I am not a coder, I tried but it is beyond me, I would be happy with Marlin or Klipper firmware please help The project needs to be completed within 1 week.

...for a skilled professional with experience in Android firmware modification to help me enhance my device by removing unnecessary bloatware. Key Tasks: - Modify the firmware to eliminate pre-installed applications that are not beneficial to the device's performance. - Specifically, I want to remove root binaries. Ideal Skills and Experience: - Proficient in Android firmware modification. - Previous experience in removing bloatware from Android devices. - Knowledge of root binaries and their implications. - Excellent problem-solving skills and attention to detail. Please note, this project does not require the addition of any specific security features. Your expertise in optimizing my device's performance by streamlining its firmware is highly ap...

We need an expert Embedded C engineer with deep knowledge in AVR microcontrol...1284P using CodeVision AVR. The project involves debugging and enhancing our current firmware and implementing specific features or modifications as required. Key Responsibilities: - Fix existing bugs, primarily related to memory management - Collaborate with our team to test and validate solutions - Enhance firmware to improve performance and reliability - Optimize existing code to improve performance and reduce footprint Ideal Skills: - Proficient in Embedded C and AVR programming - Experience with ATmega 1284P microcontroller - Familiarity with CodeVision AVR software - Strong debugging skills, particularly with memory management issues Enhancements should focus on optimizing the performance...

I need a skilled firmware expert to modify my 3D printer's firmware. The printer is an Ender 3 with a BTT SKR min e3 v3 board running Marlin, installed in a CR-10s. Key Requirements: - Adding the Auto Bed Leveling feature - Resolving incompatible configurations between the firmware and hardware - Potentially identifying and fixing firmware errors Ideal Candidate: - Extensive experience with Marlin firmware - Proven track record of modifying 3D printer firmware - Excellent problem-solving skills to address incompatible configurations - Familiarity with Ender 3 and CR-10s models

I'm in need of a professional who can configure my APC humidity and temperature sensors, upgrade their firmware and set them to send alerts via a Gmail account. Key Requirements: - Configure APC humidity and temperature sensors. - Upgrade firmware of the sensors. - Set up alerts to be sent via Gmail. The alerts I need to receive are for both temperature and humidity. Skills and Experience: - Previous experience with APC products is a plus. - Strong understanding of humidity and temperature sensors. - Proficient in firmware upgrades. - Experience in setting up alerts via email. Please note that I am using a Windows platform to manage the APC Network Card. Please configure the system to send real-time alerts for temperature and humidity issues. This configura...

We are looking for an experienced professional to design and build a custom FPV (First-Person View) drone that integrates seamlessly with a Steam Deck as the primary control device. The drone will be equipped with an ELRS (ExpressLRS) system, a SpeedyBee flight controller, and BetaFlight firmware. The goal is to control the drone using the Steam Deck and display video feedback from the FPV camera directly on the device. Steam deck can run Windows & Linux Key Requirements: Drone Specifications: Standard FPV drone setup with ELRS receiver and SpeedyBee flight controller. Configured and tuned using BetaFlight for stable flight performance. Steam Deck Integration: The Steam Deck will serve as the control interface for the drone. Stream live video from the FPV camera to the Steam...

...Required Software and Tools Circuit Design and Simulation: Altium Designer: For PCB design and electronic circuit layout. KiCAD: For open-source circuit design and prototyping. LTspice: For simulating electronic circuit behavior. Power System Analysis: PSpice: For power system modeling and simulation. MATLAB/Simulink: For analyzing and simulating power distribution networks. Embedded Systems and Firmware: Arduino IDE or Keil: For testing microcontroller-based systems. Python or C: For developing control algorithms and testing hardware-software integration. Testing and Measurement Tools: Oscilloscopes, multimeters, and logic analyzers for circuit validation. LabVIEW: For automating hardware testing and data collection. Skills and Expertise Electrical Engineering: Strong knowledge ...

I need to make a firmware project on an esp32 to communicate with the p400 microhard to send nmea and rtcm RTK sentences to another p400 radio. I need someone with knowledge of protocol Satel, transeot, trimmk3, south I prefer freelancers who have knowledge in some specific areas: Facilitates communication Knowledge in the area of: Radio frequency, programming, esp32, gnss system, messages and communication protocols, nme, Sentences nmea, Real time kinematic RTK, rtcm messages

Requirements and Features: - I am open to suggestions for specific requirements and features for the firmware. - The firmware should be optimized for gaming purposes. - The emulated firmware can be from a sound card, a wifi card... i am open to suggestions Ideal Skills and Experience: - Strong knowledge and experience in developing custom firmware for DMA cards, specifically PCILeech (Lambdaconcept). - Familiarity with EAC, BE, Faceit, and Vanguard anti-cheats. - Understanding of gaming requirements and optimizations for firmware development. If you have the skills and experience required for this project, please submit your proposal with relevant examples of previous work.

...for a skilled individual to source experienced, senior-level firmware engineers for my company, specializing in the consumer electronics industry. Representative projects: Develop firmware for high-speed interface IPs (e.g. PCIe, HBM and Ethernet). Optimize performance of high-speed interface with hardware software co-design. Collaborate closely with hardware engineers to comprehend architecture and specifications. Conduct debugging, testing and validation of high-speed interface IPs in simulation, emulation, and silicon environments. Propose feature/debuggability/performance enhancements for future generations of high-speed interfaces. You may be a good fit if you have: 5+ years of experience in firmware development for RTOS embedded systems 5+ years of...

I'm in need of a seasoned STM32 Embedded Developer to aid in the development and optimization of firmware for my production hardware. The hardware is currently in the testing phase. Key Requirements: - The firmware must support various STM32 peripheral functions, including ADC with DMA, Timers for PWM/SPWM, and UART communication. - Expertise in STM32 programming with HAL and STM32CubeMX is crucial. - Experience with FreeRTOS integration and task management is necessary. - The firmware must include support for I2C and SPI peripheral functions for sensor and peripheral communication. - The firmware must have robust error handling and diagnostics to ensure reliable operation. Ideal Skills: - Proficient in using ADC with DMA for data acquisition - Skilled...

...control This works in conjunction with a PCB which manages the technolgy I/O. The ideal candidate should have significant experience with UX design for touchscreen interfaces and programming with Raspberry Pi. It means you have a keen eye for design and are able to enhance our current version and complete the various functions. The current version is in Node Red but the company making it are firmware / PCB focussed and UX is not their strength. We have the Json files and detailed notes of changes we need. It is probably only 4-5 hours wor for this initial project, but we have a lot more we want to do with it, including setting up Push/Pull gateway etc. As the user of the device will be standing and operating at kitchen counter level, we want to use minimal text and use swip...