Rtos barkleypráce

Ucos-11 (RTOS) and tm4c123 only

K zobrazení podrobností se zaregistrujte nebo přihlaste.

I like to make a small rtos project using ultrasonic sensor

We are looking for Embedded Linux Software Engineer on a full time basis. 40 hours/week. Requirements: - At least 4 years of experience of embedded Linux programming - Excellent experience with Linux kernel customization and device driver development. - Advanced level of C programming with RTOS - Experience with Networking programming (TCP/IP) - Familiar with various microcontrollers (TI’s, Microchip’s, etc.) - Experience with security standards including TPM, HTTPS, TLS/SSL - Knowledge of hardware and low-level development is an asset - Efficient at shell scripting, uboot and php (the GUI) - Good knowledge of Web technologies such as Javascript and HTTP - Knowledge of low-level networking performance analysis is an asset

I need a simple task for bldc motor control.

Hello, Thank you for your time to read our job posting. We want to build our branded smartwatch with a new simple feature in our mind (timer related). The widget is very simple, yet we need the talent to build it since no one is familiar with building an embedded system (smartwatch) or its RTOS. What we expect from this job and questions: 1. Use an already existing smartwatch RTOS to re-skin, remove unwanted features, and add our app (timer widget). We will not be developing our RTOS from scratch, so we would need some source code, to begin with, but we don't have one yet. Would you recommend using Nucleus OS, FreeRTOS, or Zephyr OS? Do you have a basic generic Chinese smartwatch Nucleus OS? (you don't have to have it, but preferable) 2. What is the expect...

...firmware Skills Required: • Min 3 years of experience in firmware development especially in C, C++, data structures, RTOS, Linux, etc.. • Must have worked with ESP, STM32, Microchip, ATMEL line of microcontrollers • Experience with working on Timers, RTC, GPIO, EEPROM, LCD, C/C++, Data structures, 16/32-bit microcontrollers (any of PIC, STM, ESP, AVR) • Experience with working on UART, I2C, SPI. RS-232/485, GSM/GPS, GPRS, TCP/IP, UDP, WIFI, Zigbee, any of the IoT communication protocols like LoRa • Must have worked with any of the firmware development tools like Keil, STM32 IDE, Arduino • Experience in development with embedded Linux and any of the RTOS. • Experience with working on drivers like Display, Audio, Graph...

Currently seeking support from a specialist in RTOS, Xamarin and C#. Must have the following experience: - Detailed knowledge and solid experience of RTOS programming language (mandatory). - Experience of Xamarin plug in for android and IOS based apps (mandatory). - C# language (mandatory). - Hardware-app integration (preferred). - Microcontroller understanding (preferred). Short term contract (approx 6-8 weeks) for the right person.

Hi! I am currently on a project that will use TI cc1352p microcontroller. For now I am using LAUNCHXL-CC1352P launchpad, and GNU compiler. If you can assist me on this matter, please let me know. Functions I want to learn are as follows; RTOS Communication with other controller (wireless). Control servo motor and linear servo actuator. Receive input from magnetic encoder (position measurement). Receive input from Sensors (LDR, Gyroscope, Accelerometer & Magnetometer Sensor)

we want to use esp32 + sgtl5000 in the project, we want to mix up to 5 mp3 file read from sdcard or http stream and mix them together and send to output headphone jack we want to use the features as in teensyduino but without any external ch...left and right vumeter values - read from sdcard - read from http mp3 stream (like icecast or shoutcast) - play, pause, stop any source - get position and duration of loaded mp3 files for each - add new file to mixer (when any mp3 finished, we want to add new file) - if possible, but not mandatory, compressor and limiter filter to output and each mp3 (or kind of gain control) you are free to use RTOS or arduino libraries.. after this project, we will add ethernet, rtc , usb etc.. and if you capable of them also, we will open a new project f...

We are a IOT solution company mainly focused on Healthcare & Power Industry. We have requirement for RTOS Firmware development for a Nordic Micro-controller based Hardware having BLE & RS485 & UART interface with multiple devices. Preferably person shall be from Pune, having more than 5yrs of RTOS & C++Programming experience. Expert in managing multiple devices functioning simultaneously. -

I need someone with experience in Embedded Firmware Development. I want someone to teach me all these technologies. You should have experience with developing embedded C/C++ applications for embedded operating systems such as Linux, QNX Neutrino, Micrium μC/OS, etc. on ARM targets. Experience with protocols like RS232, RS485, Modbus, SPI, I2C is desirable. Experience...need someone with experience in Embedded Firmware Development. I want someone to teach me all these technologies. You should have experience with developing embedded C/C++ applications for embedded operating systems such as Linux, QNX Neutrino, Micrium μC/OS, etc. on ARM targets. Experience with protocols like RS232, RS485, Modbus, SPI, I2C is desirable. Experience in Coding C/C++ is required. ...

I need an experienced freelancer for a code i have it implemented in Arduino. What experience and knowledge you will need: - Microcontrollers such as STM32, ESP32, ESP8266, ARM, .. - RTOS (ChibiOS, FreeRTOS, ..) including multi-threading, Inter-thread communication, HAL, .. - Coding STM32/ESP32/ESP8266/Arduino in Arduino/C++ or other development language suitable for MCU automation programming, - Integrating parallel/multiple hardware/modules such as WiFi, BLE, EEPROM, Sensors.. - Knowledge in communication protocols such as I2C, SPI, MTQQ, etc.. - Experience with OTA updates implementation.

...Arduino/PlatformIO/C++ using an RTOS (Possibly ChibiOS), Over an MCU (Possibly STM32), for an IoT/automation system. What experience and knowledge you will need: - Microcontrollers such as STM32, ESP32, ESP8266, ARM, .. - RTOS (ChibiOS, FreeRTOS, ..) including multi-threading, Inter-thread communication, HAL, .. - Coding STM32/ESP32/ESP8266/Arduino in Arduino/C++ or other development language suitable for MCU automation programming, - Integrating parallel/multiple hardware/modules such as WiFi, BLE, EEPROM, Sensors.. - Knowledge in communication protocols such as I2C, SPI, MTQQ, etc.. - Experience with OTA updates implementation. You will need ACTUAL EXPERIENCE and knowledge in almost ALL of the above things, for our interaction to be useful. What I will need from you: ...

I am working on a small Linux project where I would like to automatically connect via Bluetooth to a small number of pre-designated devices. I would like the service to automatically connect and transfer the few bytes of data that they transfer. I would like to time and date stamp the downloaded data and store in database. This will be an association between one device (hub) and 6 BT devices th...script (to allow to be changed?) - then automatically connect whenever in range (BT will do this anyway for a recognized device?amIright?). This service or Daemon would run on start-up and provide logging in the form of keeping track of everything that was connected and transferred. (This service log could be examined if there was a data loss to troubleshoot.) Right now OS will probably be Free ...

...interfaces IC2, UARTs, USB etc, We develop in Atmel Studio or with the new Microchip tools and code repository in our GIT that you will access using a VPN. The system has a tone of code already done and it is in production. Many MCUs are interconnected with CAN, all protocols are in place and working, work needs to be done on GPS and 3G-4G modem and as well as on other subsystems. A good knowledge of RTOS will be appreciated, even if it is not used yet, since its going to be used in future versions. There are also other developers in the project on site. We will need to send a set of PCBs to be able to work with the hardware. You must be an EU citizen for this project and there will be an NDA that you will sign. This is a long term collaboration (6+ months and almost full time...

Prototype Safety product has an activation App (already prototype in RTOS), requires commercial quality completion - RTOS App Programmer required to support completion.

Requirements: - opensource RTOS. - supports embedded GUI rich graphics. - can be ported on SoM module link will be shared - can work with both carrier boards. link already shared. - able to create and debug applications monolithically integrated with RTOS in one code binary - with debugging support inside IDE - testing support

"Development Description Bluetooth Embedded full Stack Developers for Bluetooth Embedded Devices Development Period 3 x team members required, so if you have a team of 3 then we are interested 2 x years full time positions International Company Based In New Zealand Hardware Firmware Development Experience Nordic ...Wifi UWB (Ultra Wide Band) Lora Lidar Device Types Tags Watches Beacons Gateways - OpenWRT for embedded devices Development Packages Nordic - Zephyr - Zephyr - OpenWRT for embedded devices - "

Development Description Bluetooth Embedded full Stack Developers for Bluetooth Embedded Devices Development Period 3 x team members required, so if you have a team of 3 then we are interested 2 x years full time positions International Company Based In New Z...Lora Lidar Device Types Tags Watches Beacons Gateways - OpenWRT for embedded devices Development Packages Nordic - Zephyr - Zephyr - OpenWRT for embedded devices -

We are looking for an Experienced Person having at least 3 Years of Experience in "RTOS" Technology. **** READ THE FULL DETAILS THEN QUOTE *** **** ANSWER THE screening QUESTIONS**** Job Responsibility + Other Details 1. You have to Make Video course on "RTOS" 2. You have to Develop Code / PPT / Assignments also 3. We want a Practical course not a theory-based course 4. Audio Quality Must be Good. 5. English fluency Must be Good. 6. Long Term Project - Need Multiple People. 7. The good Teaching style is Mandatory Questions: Screening Question 1 : Do You have a Microphone? Screening Question 2 : How many years of experience do you have on "RTOS" Screening Question 3 : Do you have Video Making Experience?

I need you to port FreeRtos for me. I would like this software to be developed using C or C++. After this port is complete and tested, I will need regular support and developments on this platform. please get in touch to discuss further.

Hello, I have a Wordpress project available for bid. The project consists of moving from an existing theme to a new, cleaner theme that looks similar to It is imperative that all existing menu structures and landing pages remain intact. The site is fairly old and therefore, the search results could suffer if we lose the existing structures. I am looking for a Wordpress professional who takes pride in the end product, so if your goal is to rush through without regard for the details, please don’t bid. This is the first of 3 sites I intend to convert to a new, cleaner theme, so a job well done on this one will result in at least that business, and I may have a need for some regular maintenance on these three sites going forward

I am looking for an RTOS programmer who can develop the basic programs using the RTOS.

I programmed microchips, and be guided using STM32CubeMX to migrate to a STM32H753ZI, I need to configure clock to 400MHz using external 8MHz clock, 16 analog inputs, 9 pwms (3 pids), several digital outputs (6), interrupts, a 32 bit counter, CAN and I2C and interrupts to control injection and ignition. Of course it is a large project, but now we have a limi...guided using STM32CubeMX to migrate to a STM32H753ZI, I need to configure clock to 400MHz using external 8MHz clock, 16 analog inputs, 9 pwms (3 pids), several digital outputs (6), interrupts, a 32 bit counter, CAN and I2C and interrupts to control injection and ignition. Of course it is a large project, but now we have a limited budget and need only to start it. It i not an Arduino or linux or a rtos project but a STM32 emb...

We need a working project built on STM32F401 micro controller. This should interface to Quectel MC60 over UART and also whole project should be running on FreeRTOS. Quectel module should communicate to AWS IoT module using MQTT. The development environment should be Atollic / STM32CUBEIDE. Deliverable should be working code base. This is a code development project only.

I am looking for an experienced embedded freelancer who knows RTOS. The job is to debug the existing code and make some changes according to my needs. All the documents, SDK and examples are available too. project involves jpeg encoding, video encoding, file system access and some other house keeping stuff. All the tasks have been tested individually and tasks were merged but with bugs that need to be cleared. This is an ARM926J series processor with code written on Keil in C. you will be debugging remotely on my PC. After finishing the job I need you to be available for at least one month for any bug or tweak.

I am looking for an experienced embedded freelancer who knows RTOS. The job is to debug the existing code and make some changes according to my needs. All the documents, SDK and examples are available too. project involves jpeg encoding, video encoding, file system access and some other house keeping stuff. All the tasks have been tested individually and tasks were merged but with bugs that need to be cleared. This is an ARM926J series processor with code written on Keil in C. you will be debugging remotely on my PC. After finishing the job I need you to be available for at least one month for any bug or tweak.

Set up rtos OS aware debugging for stm32F4

Hi, No I want to prepare this project for real operaton. As we discussed earlier, in order to make 2 processrunning in real time need develop operation system. So I want to develop following: A. Real time operation system that will perform start up process, and will run 2 processes in parallel. B1. First process is reading data from 16 x BMI160 sensors with following rate 25600 reading cycles per second (we aleady werify that this is possible). B2. Second process is storring data from B1 every second to sd card B3. need add option of accessing to uC with UART in order to read data from sensors in real time. COST: 250 USD Finish date: 10.5.2020

We are looking for someone who has experience in FreeRTOS, should know how to implement ESP-IDF on ESP32. Features as first task: *All Development on ESP-IDF Contain an OLED 0.96” Modbus RS485 support Configuration of the device over MQTT and BLE ( MQTT,Wifi and Register config) Debug information over serial and bluetooth OTA Board Used - Olimex EVB We have a sho...FreeRTOS, should know how to implement ESP-IDF on ESP32. Features as first task: *All Development on ESP-IDF Contain an OLED 0.96” Modbus RS485 support Configuration of the device over MQTT and BLE ( MQTT,Wifi and Register config) Debug information over serial and bluetooth OTA Board Used - Olimex EVB We have a short deadline and would like to work with someone who has experience with it. Add 'RTOS Modb...

Barkley’s Experience and Design group is looking for a talented designer to join our growing team. Design plays an important role in everything we touch – from strategy, process and systems to art, motion and experiences. It fundamentally enhances the work we put out into the world and leads to more enduring brand interactions. As a Designer at Barkley, you will employ skill and knowledge in the craft of Design across multiple mediums to create experiences that are distinctive and memorable. You will be called upon to push the boundaries of typography, color, pattern and imagery to disrupt the visual landscape in the service of great ideas. You’ll think in terms of systems before executions. And you’ll be expected to maintain an active curiosity and awarene...

...6LoWPAN we are interested. There is a WI-SUN alliance promoting a RF based on IEEE 802.15.4g. We are specifically interested in if you have some experienced of the WI-SUN concept. So we are interested to investigate the possibility to make a full Wi-SUN stack compatible with EFR32FG12 and EFR32MG12. If will be possible to port good open source Wi-SUN solution with RTOS to our platform (MbedOS for example). Or open source RTOS + open source Wi-SUN libraries. So, we interested in implementation of all OSI layers of Wi-SUN. At the application level we interested first in implementation of SNTP, and protocol for OTAP upgrade of devices. We found one open-source Wi-SUN implementation for Cortex-M in the ARM mbed-OS: If you have

...Marine radio, Chartplotter devices played a major role in the maritime market. As a vital part of our product development team we are looking for an electronics designer. Tasks: • Hardware and software development of marine electronics • Maintenance and improvements of Factory Acceptance Tests (FAT) • Embedded Systems Technologies and Tools required • PCB design (Altium Designer) • Embedded RTOS (C++) • C# development in Visual Studio • VHF and GNSS, Radar systems Skills: • Hardwaredesign and related programming • Enthusiasm and Commitment • Communication in German and English both in writing and orally • Interest in maritime activities • Hands-on mentality Formation/Experience: • Minimum bachelor&rsquo...

Hi, I am looking for an embedded expert who can merge codes and add some new functions. This is a custom ARM9 board running on RTOS for video encoding, bare metal for JPEG encoding etc. all these tasks are already been implemented and tested individually. SDK is available with examples. Tasks: 1. Establish uart connection to store some data. Data will have info like Date, time, GPS coordinates and serial number. These four info will be used to be embed on image and video. On video it is already done. You will need to implement on image. 2. Command from uart to copy data from SD card to USB drive and another command to flush data on SD card. 3. Merging Video, image and above codes together You must have Keil IDE with arm compiler and I need you to be available for next 2 months in ...

require expert in components found in smartphones, circuit design and interface controller code c++ rtos

I need someone to submit some articles for me.

Our project is based on MKL05Z32VLF4 microcontroller. There are 4 analog inputs and 2 relay outputs. There is no RTOS. We need to add new functionalities to the firmware to make the product act like an alarm monitoring center. I can share a little bit more via messaging. Detailed specification under NDA.

Hello, We have a working triac (BTA16) based circuit with RC filter. But while using it for Inductive load such as fan it creates humming noise. We want experienced freelancer to do the task within stipulted time. The code for the same should be on amazonfreeRTOS platform (ESP WROOM 32)

Hello, We have a working triac (BTA16) based circuit with RC filter. But while using it for Inductive load such as fan it creates humming noise. We want experienced freelancer to do the task within stipulted time. The code for the same should be on amazonfreeRTOS platform (ESP WROOM 32)

Hello, We have a working triac (BTA16) based circuit with RC filter. But while using it for Inductive load such as fan it creates humming noise. We want experienced freelancer to do the task within stipulted time. The code for the same should be on amazonfreeRTOS platform (ESP WROOM 32)

Connecting WebRTC compliant devices to the SBC WebRTC Gateway at the edge of the cloud. 2 MUST conditions for solutions are 1. IP device with WebRTC support SIP over WebSocket signalling 2. RTP media transfer, communication protection as they cross network boundaries Embedded device environment: Embed...pay-per-basis hourly rate Experience with embedded firmware development and platforms Solid experience with embedded Linux build systems Significant development experience in C/C++ Experience in developing kernels and device drivers Experience with serial interfaces (UART, SPI, RS485, I2C, etc.) Experience with ZigBee, BLE, Z-Wave and / or WiFi applications Solid understanding of embedded systems and RTOS Experience designing software APIs Experience with Git/BitBucket Timeline: ...

I need an app for a SmartWatch that runs Nucleus® RTOS. It should do the following: 1) when the app is started it will check if there is a file on the MicroSD card on the watch. 2) If there is such file it should show it’s content (all the text) on the screen with the ability to scroll page by page (up and down) using the touchscreen 3) If there is no file the app should show this message: “ file could not be found.” is a text-based file. It can be up to 2mb large file.

Hello, I have a board running on ARM9 which is currently taking video and saving it on a SD Card running on RTOS. Task is to take JPEG images from the sensor instead of encoding video. Docs and SDK with examples are ready. If you do it I have more tasks. thanks.

I need a firmware developer who can code the firmware to my board, more information can be provided after initial contact If you don't have previous experience with Stm32 RTOS + Atollic, please don't bid.

I need someone to write a simple code (No RTOS) in code composer for MSP432E401Y Launchpad to work with VL53L1X over I2C. The VL53L1X ULD API should be used: This is a 1-2 hours job for an expert.

Requirement to develop embedded software in C for ARM Cortex M4 STM32, using Keil MDK IDE within RTOS middleware with multithreading. Environment already prepared. This requirement is to reliably send strings between our MCU's (up to 4) and the Raspberry Pi SBC running Linux Raspbian. We also need memory allocation from each of the STM32 MCU's IO, and to reliably update I2C master's with memory addresses upon polling request. We need to have firmware written and tested for the MCU and also Node.js code written and tested for the Raspberry Pi, through to Node-Red, with existing Node-Red I2C npm package nodes being utilised or alternatively develop a new package. Developer must configure Linux Raspbian and document all the CLI commands used. Must have strong Experience...

Hi there, I need i2c drivers for the ARM Cortex powered board for these chips: 1) BQ25892 -- Single Cell 5-A Fast Charger 2) BQ27421-G1 -- Fuel Gauge With Integrated Sense Resistor The driver should be in the Zephyr-style (pls check here: ). The driver should support interrupt / trigger, like in: The driver should support configuration, status reading and interrupts settings. for (1) set current limits, e tc for (2) read all battery values e tc thanks in advance!

we have a team of experts who familiar in Well versed with PCB layout and Schematics capture and should be able to use the tool independently Should have exposure to multilayer PCBs Design multilayer PCBs for embedded appli...applications Should be able to work with the designers for the layout generation Generate gerbers and manufacturing ready release packages for PCB Manufacturing. Work with PCB vendors for Stackup generation Knowledge of Altium and PADs will be an added advantage Proficiency in designing, building, and debugging embedded systems. Understanding of C programming language Working experience with embedded RTOS Experienced in using interfaces like UART, I2C, flash, eMMC and RAM interface. Experience on analog and digital circuit design Experience with GSM/...

We are a small Australian vocational RTO college. We require a specialist in instructional design and formatting of assessment for 4 qualifications. We have existing resources that require improving and validation and then put on our online student management system. Person needs to understand competency based assessment, Australian VET sector and Standards for RTOs 2015.