Piezoelectric cylinder ansysроботи
I need an expert in Finite Element Analysis (FEA) to help me measure pressure on a steel shaft. The shaft has some pe...a bearing is. - Account for constant overhanging moment loads. - The shaft and overhanging extensions are inside a cylinder filled with water and some solids - If required, I can provide a STEP file of one solid piece and this can be multiplied by X number to fill the cylinder Ideal Skills: - Proficiency in FEA software. - Experience in analyzing steel structures. - Understanding of axial and radial load measurements. I am looking for someone who can provide precise measurements and help me understand the pressure dynamics on the shaft where the bearing is. In other words I need to know the forces applied on the bearing when the shaft rotates ins...
Estoy haciendo una simulación de un plato perforado tengo todo realizado, la geometría, el mallado y el setup pero en un momento de la simulación en la gráfica de residuales se eleva mucho, tampoco tengo un computador para que se haga el proyecto rápido. I am doing a simulation of a perforated plate. I have everything done, the geometry, the meshing and the setup, but at one point in the simulation the residual graph rises a lot. I also do not have a computer to do the project quickly.
Estoy haciendo una simulación de un plato perforado tengo todo realizado, la geometría, el mallado y el setup pero en un momento de la simulación en la gráfica de residuales se eleva mucho, tampoco tengo un computador para que se haga el proyecto rápido
I am looking for an experienced professional to perform a simulation of a 3D axial flow fan turbomachinery rotor. The m...Contour plots Blade loading distribution Efficiency and performance graphs Any other relevant insights Deliverables: 1. A detailed report including operating curves and analysis. 2. Visualization outputs (e.g., contours, blade loading, etc.). 3. Simulation files for future reference. Preferred Skills: Expertise in turbomachinery simulations Proficiency in CFD tools such as ANSYS CFX, Fluent, or similar software Knowledge of axial flow fan design and analysis If you are confident in your skills and have relevant experience in similar projects, please provide your proposal with a timeline and cost estimate. I look forward to collaborating...
...involve size, detail enhancements, and structural modifications. The purpose of this model is for the verification of design prior to manufacturing, so precision is critical. The internal dimension needs to be the slightly large than that of a clipper lighter, the dimensions are attached (although if you have access to one please take your own provided is my best attempt at measuring), the main cylinder needs to have a diameter of 17.25mm, with a 10mm wide protrusion where the end is rounded with a radius of a 12.5mm circle. See attached. Ideal Skills: - Proficiency in 3D modeling software - Experience with USDZ files - Attention to detail - Ability to make structural modifications - Knowledge in preparing models for 3D printing - Understanding of design verification proce...
I'm seeking a professional with extensive experience in thermal simulations. The project revolves around a PCB board housed in a plastic enclosure. Key tasks include: - Conducting a detailed thermal simulation to identify potential hotspots on the PCB and within the enclosure. - Providing recommendations to improve cooling efficiency. - Ensuring the selected ma...enclosure. Key tasks include: - Conducting a detailed thermal simulation to identify potential hotspots on the PCB and within the enclosure. - Providing recommendations to improve cooling efficiency. - Ensuring the selected materials can safely withstand the thermal stresses encountered during operation. Ideal candidates will have expertise in using thermal simulation software, with a preference for ANSYS, SolidWo...
I'm seeking a skilled CFD analyst to evaluate three cambered airfoils at two specific Reynolds Numbers: 166,000 and 638,000. The analysis must be conducted using ANSYS Fluent. Key Requirements: - Proficient with ANSYS Fluent - Experienced in CFD analysis of cambered airfoils - Able to interpret and present results clearly The successful freelancer will have the opportunity to work on a challenging project with potential for future work.
I need a professional who is highly skilled in ANSYS software to help me model 5 concrete, rectangular beams under cyclic loading. I have precise dimensions for the beams. The ideal freelancer for this project should have: - Extensive experience with ANSYS software - Strong background in engineering, specifically in beam modelling under cyclic loading - Ability to understand and work with precise specifications If you meet these criteria and can deliver high-quality models, please get in touch. Thank you!
I'm seeking a skilled professional with experience in ABAQUS Simulia to simulate shoulder movement using two types of prosthetics - reverse and custom made. Key Aspects: - The primary focus of the simulation will be the range of motion of the shoulder with each type of prosthetic. - I have...range of motion of the shoulder with each type of prosthetic. - I have existing 3D models for the prosthetics, so no assistance will be needed in that regard. Deliverables: - The simulation report should include visual animations and numerical data. - Graphs and charts are not necessary. - video of the process Ideal candidates for this project should have: - Proficiency in ABAQUS Simulia or Ansys. - Experience with biomechanical simulations. - Ability to present data in a clear and acc...
... Design Inputs for Support System: Specific structural inputs tailored to Hilti’s product selection for pipe support systems. Requirements Proven expertise in structural analysis of piping systems. Experience with chilled water systems and pipe supports. Familiarity with industry standards (e.g., ASME, local building codes). Proficiency in relevant tools : (CAESAR II, ANSYS, SAP2000). Strong ability to present technical findings in tables, graphs, and diagrams. Proposal Submission Include the following in your proposal: Summary of qualifications and relevant projects. Approach to the analysis and report preparation. Estimated timeline for completion. Proposed fee for the project. Deadline for Submission Submit all proposals v...
I need Electric and Magnetic field plotting using ANSYS methodology. I will provide the following details 1. Transmission tower dimensions 2. Operating voltage value 3. Different current scenarios. I need a 2D cross section of the E-Field and H-Field mapping from source till +100 and -100 metres distance. An example of this is provided in the image attached below.
...recommendations. The vibration analysis report will include frequency-response data, vibration amplitude charts, and recommendations for structural adjustments. 10. Timeline The expected completion time for the project is 14 to 21 days, including CAD modeling, CFD, FEA, and vibration analysis. 11. Additional Notes The freelancer must have experience with CFD, FEA, and vibration analysis tools such as ANSYS or SolidWorks Simulation. Regular updates and communication are required for feedback and revisions. The design must be manufacturable and include tolerances suitable for production....
...designs should be versatile, but maintain a high radiant level of luxury elegance and sophistication. Key Task: *Designing and engineering luxury furniture pieces *Creation and integrating mechanical, mechanism, components, and functionality into each design *3D/4D renderings (inner and outer layered design) *2D designs *CAD ready designs *Sewing/stitching pattern and designs *Structural analysis (ANsys) *BOM and BOL list *Manufacture instructions/guide Key requirements: *Versatility with hands-on expertise and a thorough understanding of furniture design and engineering, with a keen sense for current trends and techniques on a broad variety of luxury furniture production. *Experience in designing upholstered and solid wood (carvings) furniture *Ability to visualize with a keen...
I'm looking for a skilled professional who can create a 1/25 scale, 4 cylinder and 8 cylinder motor model for a slot car. The finished product should be a resin model with moderate details that closely resembles an actual motor. Key Requirements: - Expertise in model making, specifically in creating scale motor models. - Proficiency in working with resin. - Ability to understand and replicate moderate details from a reference image. Please note, I have a picture of the desired model, which, while not perfect, should provide a good starting point. The primary purpose of these models is to serve as a slot car engine that visually mimics a real motor.
I'm looking for a creative designer who can help me design an eye-catching advert for the rear of a bus. The advert should reflect our plumbing company's commitment to 'Top Quality Workmanship' and showcase our specific service of 'Boiler/Cylinder Installation'. Key requirements: - The advert needs to convey a 'Fun and Eye-catching' visual style, as opposed to a more 'Professional and Clean' or 'Bold and Modern' approach. - A deep understanding of design principles for vehicle advertising. - Experience in creating visually appealing designs that are still able to effectively communicate the intended message. - Strong creative skills and ability to think outside the box. The ideal freelancer for this job would be an exp...
I need assistance with validating a research paper using Ansys. I am currently pursuing my Mtech and have a mid-project review coming up. This task is straightforward and I just need some suitable results to present at my review. The analysis will focus on: - Fluid dynamics , Heat transfer , Phase Change The material under analysis will be: - PV modules, specifically: - Polycrystalline PV modules - PCM ( Phase Change Material) Skills and experience that would be beneficial for this project include: - Proficient in using ANSYS software - Understanding of fluid dynamics , CFD and Heat transfer - Ability to deliver reliable results in a timely manner.
...the most efficient design. The project involves creating CAD models for each AWE system in SolidWorks and conducting CFD simulations using ANSYS Fluent to analyze their performance under various wind conditions. Key Deliverables 1. CAD Models in SolidWorks: o Design detailed 3D CAD models for the two AWE systems: Kite-Based System Tethered Balloon (Aerostat) System o Ensure models are optimized for aerodynamic analysis, including critical features like airfoil shapes, tethers, and structural components. o Deliver models in SolidWorks file format (.SLDPRT) and exported compatible formats (.STEP, .IGES) for CFD simulations. 2. CFD Simulations in ANSYS Fluent: o Conduct CFD simulations for both CAD models to analyze: Lift-to-drag ratios. Pressure distribution and flow...
I need a skilled web developer to create a modern and minimalist personal portfolio website. The site will showcase my research, publications, skills, and useful resources, primarily to attract academic collaborators. Key Features: - Home Section: A brief introduction and an inspirational quote. - Skills & Expertise Section: Highlighting my technical proficiencies (e.g., LaTeX, CFD, Ansys FLUENT). - Projects & Publications Section: Listing my research highlights, thesis, and journal articles. - Useful Links Section: Featuring academic resources and courses. - Contact Page: With an integrated form for inquiries. - Social Links: To my LinkedIn and faculty page. The design should be simple, professional, and mobile-responsive. I can provide additional content and assets as ne...
I'm looking for an expert who can develop a User Defined Function (UDF) in ANSYS Fluent for analyzing the aerodynamic performance of a foldable flapping wing. The project should be completed within a week. Key Focus: - The primary focus is on the aerodynamic performance of the wing. - Critical parameters for analysis include lift and drag forces, as well as flow patterns around the wings. Refer: Reference: Guerrero, J. E., Pacioselli, C., Pralits, J. O., Negrello, F., Silvestri, P., Lucifredi, A., & Bottaro, A. (2016). Preliminary design of a small-sized flapping UAV: I. Aerodynamic performance and static longitudinal stability. Meccanica, 51, 1343-1367. Video: Refer above, before confirming your bids. Requirements: - The analysis should be done
This UDF (User Defined Function) is designed to model the transpiration phenomena of tomato plants in a simulated environment using ANSYS Fluent. The UDF calculates thermal and moisture exchanges based on environmental parameters such as ambient temperature and relative humidity, considering the plants as porous parallelepiped blocks. The objective is to understand and simulate the impact of climatic conditions on the internal dynamics of the plants. The code initializes the internal temperature and water fraction within the domain's cells. It employs empirical and physical relations to estimate stomatal and aerodynamic resistances, heat flux, vapor pressure difference (DPV), and convection properties based on flow regimes (natural, mixed, or forced convection). The UDF also co...
Hi, we are a family in NZ wanting to create a spiked gardening instrument for stakes made out for plastic. Project details - Plastic to be used in 1.2mm. - Total length of the stake is 400mm - 300mm is a hollow cylinder at the top that will hold the stake. - 100mm is the spike at the end that goes into the soil. - We would also like a T-bar about 350mm long that inserts the stakeholder - At the bottom of the cylinder we would like a light bulb like feature, where the T-bar can pull the stake out. We look forward to hearing your proposals.
I'm looking for an expert in ANSYS Fluent and fluid dynamics analysis to perform a PCM heat sink analysis. Key requirements: - Proficient in ANSYS software with a focus on Fluent - Extensive experience in fluid dynamics analysis - Familiarity with PCM heat sink technology - Capable of providing detailed CFD simulations and flow modelling Your expertise will help assess the thermal performance and efficiency of the PCM heat sink under various conditions.
I need an experienced automotive engineer to create detailed technical drawings for a powertrain replacement on a 24-gauge passenger train. We're transitioning from an outdated inline 4-cylinder gasoline engine to a more powerful and reliable 4BT Cummins Turbo Diesel engine. Key components to focus on: - Engine mounts and supports - Exhaust and intake systems - Cooling and fuel systems The main objective of this project is to ensure structural integrity for regulatory compliance. The new powertrain is expected to enhance durability and performance, but we need to guarantee that all changes meet stringent safety and reliability standards. Your expertise will be critical in: - Designing components that can withstand the increased torque and power of the 4BT - Ensuring all part...
I'm looking for a skilled professional who can design and simulate mi...with a thin isolator between them to prevent crosstalk. - The design should recommend the lenses' material. MATERIAL CHARACTERISTICS: - While the specific material characteristics: low losses an well focused beam SOFTWARE: - The preferred simulation software for this project is ANSYS HFSS. Equivalent tools can be considered as well MAIN PRIORITY: - The primary goal is to ensure each of the lenses focuses the beam with a 'field depth' of about 5 cm. IDEAL CANDIDATE SKILLS: - Proficient in ANSYS HFSS or similar tool - Experience in designing and simulating millimetric wave lenses. - Knowledge about suitable materials for lens design. Your expertise will help in ac...
I am looking for an expert in ANSYS Fluent to carry out a project on simulating a droplet falling on a moving porous substrate, specifically a sponge. The focus will be on understanding the droplet impact dynamics. Key Requirements: - Proficient in ANSYS Fluent - Previous experience with droplet impact simulations - Able to compare simulation results with published research data for validation - Understanding of sponge as a porous substrate The ideal freelancer will have a strong background in fluid dynamics and experience with droplet impact dynamics. They will also have the ability to validate simulation results with published research data.
I'm looking for a professional with expertise in Ansys FLUENT, specifically the Reynolds-Averaged Navier-Stokes (RANS) turbulence models. My primary interest lies in using these models to predict turbulent flows in open channels. Key requirements include: - Proficiency in using Ansys FLUENT - Extensive knowledge of RANS turbulence models - Experience in predicting turbulent flows in open channels - Ability to explain complex concepts in a simple manner Please provide a detailed proposal on your approach to this project, including your relevant experience and how you plan to help me achieve my objectives.
I am looking for an expert in Fluid Structure Interaction (FSI) to conduct a 3D simulation of a heart valve using ANSYS. Requirements: - Utilize the provided 3D CAD model and boundary conditions - Conduct the simulation considering hyperelastic material properties - Deliver comprehensive outputs detailing fluid structure interaction I have previously conducted a 2D simulation and can provide reference images and journal papers if needed. The project timeline is 2 weeks. Ideal candidates should have extensive experience with ANSYS and FSI simulations, as well as a strong understanding of hyperelastic material properties. Proficiency in interpreting and presenting complex simulation outputs is crucial.
...style mug for me. This mug needs to have a specific rectangular area for a 2670 x 1110 px image that wraps around the mug (excluding the handle). Key Requirements: 1. Design Style: The mug should be of a classic style - Exactly like this one: 2. UV Map: The mug may have a child cylinder with a UV Mapping that allows a 2670x1110 image to wrap the cylinder part of the mug, keeping the handle and the rest of the mug with a different color. The purpose of this mug is for me to use it in my iOS application where I will set its materials and images programmatically. I've been able to create mugs myself, but my mug doesn't look too realistic and my UV mapping skills are even worse. Therefore, your expertise in 3D design
Project Overview: Objective: Analyze ski vibrations and evaluate the effectiveness of a vibration reduction system (e.g., Atomic’s Servotec) using ANSYS simulations. Key Deliverables: Dynamic analysis of ski vibration without and with a vibration reduction system. Simulation results demonstrating the effectiveness of the reduction system. Optimization suggestions for the reduction system, if applicable. Key Project Components: Ski Modeling: Create a detailed 3D model of a ski (geometric and material properties). Incorporate realistic material parameters like elasticity, damping, and density. Vibration Reduction System: Research and model a vibration reduction system like Servotec or similar mechanisms. Simulate the integration of the system into the ski. Simulation Setup: D...
I have an Ansys . file containing a geometric 2D shape that needs to be extracted and edited in SolidWorks. The edits required are primarily structural modifications. Once the modifications are complete, the final file needs to be saved as an SLDPRT. Ideal skills and experience for the job: - Proficient in SolidWorks with a strong background in 2D to 3D design conversion - Experience with structural modifications in SolidWorks - Familiarity with Ansys file formats and extraction processes - Ability to deliver in specific file formats, particularly SLDPRT.
I'm looking for a professional with expertise in ANSYS to help me extract data related to deformation and displacement from the program. The extracted data should be delivered in Excel format. Please note, I might require some post-processing depending on the quality of the raw data.
...skilled mobile app developer (or team) to help bring my innovative app idea to life. The app aims to allow users to input their vision prescription (e.g., sphere, cylinder, axis), and the app will adjust the phone’s screen display to make it appear clear for the user without wearing glasses. This is an exciting project at the intersection of technology and vision science. I do not have a coding background, so I need a developer who can guide me through the process and turn this concept into a functional mobile app. Key Features: 1. Vision Prescription Input: Users enter their vision prescription details (e.g., sphere, cylinder, axis). 2. Real-Time Screen Adjustment: The app dynamically alters the display to compensate for refractive errors like myopia, hyperopia,...
...for CNC machining on Xometry (STEP, STP, etc.). As a starting point for the project, I have photos of the wax cylinder that needs to be created through the mold and a drawing with measurements. An idea of how the mold will appear can be seen in the linked video. Key Points of the Project Mold Production: The project involves creating a mold using CNC machining. Purpose: The mold is intended for producing wax cylinders. Material Process: Wax will be poured into the finished mold to create the cylinders. File Format: The project files need to be compatible with Xometry's CNC machining services, using formats such as STEP or STP. Reference Materials: Photos of the desired wax cylinder Drawing with measurements A video showing a similar mold design :
I need an expert in Ansys software to help me simulate a biomass gasification process. The feedstock will be sorghum stalks, and the goal is to understand how varying inputs of air and steam will affect the composition of syngas. Key tasks include: - Performing simulations based on specified air and steam inputs - Analyzing and reporting on the resulting syngas composition Ideal candidates will have: - Extensive experience with Ansys software - A strong understanding of gasification processes - Ability to interpret complex simulations and provide clear, concise reports
To build the motion control algorithm that guides the robot arm (Universal Robot UR5e) to move in a specific path based on the information or data it receives from the Gocator sensor, which is mounted on the robot. The scanning data will be the object's profile in a 2D coordinate (x and z, image attached), and the object can be a cube, a cylinder, or any shape of the object with a flat surface on top. The algorithm will require the robot to follow the object's edge as the path until the cycle is completed, and the robot may have to auto-adjust its position (X, Y, Z, Rx, Ry, and Rz) in real-time based on the scanning data. Note that the sensor's coordinate system is currently different from the robot arm's coordinate system. This task will not be developed from ...
I require a comprehensive Finite Element Analysis (FEA) on my 4x4 chassis model. The analysis should help in understanding the stress distribution, deformation patterns, and potential failure points under static conditions. The model will be provided in STEP file format. Ideal Skills: - Proficiency in using FEA software (like ANSYS, Abaqus, or similar) - Expertise in structural analysis - Experience with automotive chassis analysis What I Expect: - Detailed report on stress distribution - Insights on deformation patterns - Identification of failure points Please ensure you have the necessary skills and experience before bidding.
I am in need of an experienced 3D designer who can create a sliding two-cylinder system for an independent project. This system consists of one cylinder that fits snugly inside another, designed for stability during both extension and retraction with minimal friction. The ideal candidate for this role should have a strong understanding of mechanical design principles and a proven track record of designing efficient, functional models. Key project details: - The cylinders should be designed to be made of plastic. - The sliding mechanism will be activated manually. Please provide examples of similar projects you've completed in the past, as well as your portfolio. Experience with industrial machinery design will be a plus. The cylinders should be designed to be small a...
I am looking for an expert in Fluid Structure Interaction (FSI) to conduct a 3D simulation of a heart valve using ANSYS. Requirements: - Utilize the provided 3D CAD model and boundary conditions - Conduct the simulation considering hyperelastic material properties - Deliver comprehensive outputs detailing fluid structure interaction I have previously conducted a 2D simulation and can provide reference images and journal papers if needed. The project timeline is 2 weeks. Ideal candidates should have extensive experience with ANSYS and FSI simulations, as well as a strong understanding of hyperelastic material properties. Proficiency in interpreting and presenting complex simulation outputs is crucial.
To build the motion control algorithm that guides the Universal Robot UR5e arm to move in a specific path based on the information or data it receives from the Gocator sensor, which is mounted on the robot. The scanning data will be the object's profile in a 2D coordinate (x and z), and the object can be a cube, a cylinder, or any shape of the object with a flat surface on top. The algorithm will require the robot to follow the object's edge as the path until the cycle is completed, and the robot may have to auto-adjust its position (X, Y, Z, Rx, Ry, and Rz) in real-time based on the scanning data. Note that the sensor's coordinate system is currently different from the robot arm's coordinate system. This task will not be developed from scratch. There's ...
I'm in need of an Excel specialist to set up an accounting system for LPG gas cylinders. The tasks the Excel sheet needs to handle are tracking inventory levels, generating financial reports, and monitoring cylinder movements. Key Requirements: - Proficiency in Excel - Experience in creating inventory and financial tracking systems - Ability to suggest effective templates and structures for the Excel sheet - Skills in setting up data importing from other sources The ideal freelancer for this project should have a strong background in data analysis and accounting.
I'm looking for a designer who can create eye-catching, colorful and bold packaging for my cashew snacks. The design should be suitable for physical store shelves and should effectively incorporate our brand elements. Key Requirements: - Design should be bold and colorful - Use of logo and branding elements - Inclusion of nutritional information - Effective use of product ima...clear information on allergens Ideal Skills: - Experience in packaging design - Strong understanding of brand integration - Proficiency in creating designs for physical store display The design should follow the specified color palette or theme. The design should convey a fun and playful tone, appealing to a young and energetic audience. The preferred packaging types are a stand-up pouch and a cylinder...
Preferred simulation tool is ANSYS. The project requires fluid dynamics simulation. The fluid to be simulated is Water. The specific flow rate to be simulated is 0.1 m/s. Please provide the results in contours and Excel data. The simulation should use specific geometry provided. The project timeline is 2 weeks. The primary objective of this simulation is performance analysis. The specific geometry will be provided in a CAD file. Include pressure drop measurements in the simulation results.
I'm seeking an experienced ANSYS professional for an acoustic analysis project focusing on the vibration of polymer materials. Key Requirements: - Proficient in ANSYS for acoustic analysis. - Expertise in vibration analysis. - Experience working with polymer materials. Your responsibilities will include: - Conducting thorough vibration assessments on specified polymer materials. - Utilizing ANSYS to predict and analyze potential acoustic issues. - Providing comprehensive reports on findings with possible recommendations. Ideal candidates will have: - A strong engineering background with a focus on acoustics and vibration. - Proven experience with ANSYS and polymer materials. - Excellent communication skills for report writing and discussing findings.
Hello I need to simiulate Human tooth on Ansys, I can give you stl files, so you need to convert stl files to stp files and assemble. you need to simulate assemble on ansys workbench. I need this simulation report after you done. Budget is only 100 USD
More details: I am looking for someone to design a 3D rendering for the development of a silicone candle mold in wildflower and woodland themes. Think of a pillar candle (a cylinder) with wildflowers wrapped around the whole thing. I’m mostly envisioning this pillar style of candle with artwork around it, but I may want to branch out into actual animal forms in the future. Whimsical wildflowers (instead of big bold goddy flowers) is the vision. I would also love a couple designs with northern woods themes (wolves, moose, salmon). I’m also a beekeeper so some beekeeping themes would also be wonderful. candle sizes I envision are about 2x3 minimum and 3x8 maximum. 3x6 could be perfect. Reach out for more questions or details. attached are just inspiration or idea p...
I need a simple finite element analysis (FEA) for a small trench shoring structure. Requirements: - The primary focus of t...analysis (FEA) for a small trench shoring structure. Requirements: - The primary focus of this analysis will be the load capacity of the shoring system. - The ideal freelancer should be proficient in FEA and have experience working with shoring structures, particularly trench shoring systems. - Knowledge of load capacity analysis is crucial. - Proficiency in using specific FEA software such as ANSYS, ABAQUS, or SolidWorks Simulation. - Understanding of materials used in shoring systems, such as steel, timber, or aluminum. - Details of any previous projects involving trench shoring systems or similar structural analyses. Please include relevant experience in...
I am seeking a professional to help simulate and analyze how compression affects the thermal behavior of lithium-ion pouch batteries. Key areas to focus on: - Investi...considering internal resistance and exothermic reactions. The ideal freelancer for this project should have experience in mechanical and thermal analysis, particularly with lithium-ion batteries. Proficiency in simulation software and understanding of battery materials and behavior under stress is crucial. Previous work in mechanical deformation analysis will be an advantage. The project will utilize ANSYS for the simulation. Deliverables should include a detailed report of the simulation results and analysis. The final report should be provided in both PDF and Word formats. The project should be completed withi...
I'm seeking an experienced ANSYS Workbench software trainer to conduct 1-to-1 training Key Requirements: - Proficiency in using ANSYS Workbench Mechanical / Sructural analysis, particularly static structural analysis. - Strong knowledge & experience in Ansys workbench Software - Good communication and technical skill
