Розводка друкованої плати Jobs

I'm looking for someone to assist with the fabrication of a PCB integrated with an array of SMD LEDs with the following properties: - The type of LEDs is chosen and the design of the board is ready (only in Gerber format, in the attachment). The person should use this to re-create the schematic drawing, BOM, placement file for assembly. There is no need for a new design from scratch, unless an obvious error is spotted. - It includes LEDs that does not appear in the stock of the intended supplier (i.e., JLCPCB). I need step-by-step assistance in handling this issue (how to order for them to stock etc.).

I'm working on an Arduino project that involves various hardware components and I need help with several aspects of it. - Main Goal: The project revolves around both hardware and coding. - Hardware: The project will use sensors, motors, and displays. - Specific Tasks: I need assistance with circuit design and wiring, writing and debugging code, and integrating the hardware components. Ideal skills and experience for this job would include: - Extensive knowledge and experience with Arduino - Proficiency in circuit design - Strong coding skills, especially in Arduino's programming language - Experience with various hardware components like sensors, motors, and displays - Excellent debugging skills - Able to integrate hardware components seamlessly

I'm looking for an electronics engineer or someone familiar with MikroC, PIC programming, and Proteus software. I need a simple task completed where you will program a 12F675 PIC microcontroller to generate a PWM signal to control an LED brightness with two push buttons. Key Requirements: - You will receive a Proteus file with a simple schematic. - Your task will be to program the PIC in MikroC to adjust LED brightness based on button presses. - The code should include basic comments explaining each section. - The PWM signal will need to be set within a specific duty cycle range. Please note that if the job is successfully completed, you will receive your payment. If it fails, no payment will be made. The job is straightforward for someone with programming experience, which is why...

I'm seeking an experienced electronic circuit designer to create a compact (30mm x 15mm) BTE hearing aid circuit. The primary function of this device will be noise reduction. Key features to be integrated include Bluetooth connectivity and a Telecoil for phone use. The device will be powered by a disposable battery. Key Responsibilities: - Design and create electronic diagrams and PCB layouts based on my specific instructions. - Ensure the design is compact and efficient, suitable for a small hearing aid. Ideal Skills and Experience: - Extensive experience in designing electronic circuits and PCB boards. - Previous experience with hearing aid design would be a plus. - Proficient in creating designs compatible with Bluetooth and Telecoil technology. - Ability to design for a disposa...

I need an experienced PCB designer to develop a cost-effective PCB for me. This PCB should: - Communicate using Modbus RTU - Read data from 3 Modbus RTU Slave registers, with each slave having 5-10 Modbus Registers - Convert all read data into HART protocol (specifically HART 5) The primary function of this PCB will be monitoring, so the design should be tailored for efficient data tracking. Additionally, the PCB will need to be powered by a DC source, so the design should account for this. Ideal skills for this job include: - PCB design and development - Proficiency in Modbus RTU communication systems - Expertise in HART protocol conversion - Experience with DC-powered devices - Ability to create cost-effective solutions

I'm seeking an experienced developer to create a Microcontroller based main board & write the software for me. Key Project Specifications: - The board should feature a 2 channel ADC for precision temperature measurement from Type K, R and S type thermocouples. - I prefer the use of the STM32 microcontroller family for this main board. - Communication interfaces supported by the main board should include I2C, SPI, UART, ADC, RS485, and RTC. Deliverables Expected: 1. Three fully assembled and programmed PCBs ready for testing. 2. Complete source code for the project. 3. Schematic and Gerber files, including a pick and place file for PCB assembly. 4. Bill of Materials (B.O.M.) with vendor information. Ideal Skills and Experience: - Proficient in STM32 microcontroller programming ...

I am seeking a highly skilled Technical Report Writer with experience in FPGA development, PCB design, and electronic hardware integration to document a comprehensive report on the LVDS to MIPI CSI-2 video stream conversion project.

I'm looking for a professional who can convert my Altium Designer schematic diagram into a Gerber file. Key Requirements: - Proficient in Altium Designer, with experience in generating Gerber files. - Able to deliver high-quality work on time. Please note, there are no specific design rules or constraints to be applied. Default settings should be used.

Necessito de alguem que consiga auxiliar em um projeto de um detector de fumaça controlado por arduino esp32 que se comunica com dispositivos celulares.

I need a chip designed for automotive applications. The chip should be tailored for safety features, specifically supporting emergency braking. Ideal Skills: - Extensive experience in chip design, particularly for automotive applications. - Knowledge in designing chips for safety features. - Proficient in designing chips for emergency braking systems. Please provide your past work examples related to this project.

I need an experienced electrical engineer to design a DC-DC buck converter for my project. Key Requirements: - The converter should step down input voltage to a stable 24V output. - It needs to handle an input voltage range of 400V. - The output current should be capable of reaching up to 10A. Ideal Skills: - Proficiency in buck converter design. - Strong understanding of electrical engineering principles. - Prior experience with handling high current outputs. -Prior experience in military or aviation or EV Please include examples of relevant projects you've worked on in your proposal.

I'm looking for an experienced engineer to help me with a project involving a DC motor, multiple sensors, and PCB design. Key Requirements: 1. **DC Motor Control**: The primary function of controlling the DC motor is speed regulation. 2. **Sensor Integration**: The project will involve the use of various sensors including: - Temperature sensor - Light sensor - Humidity sensor - Solenoid Valve - Flow Measurement - Sim Module - RTC 3. **PCB Design**: The PCB will need to cater for: - Signal processing and conditioning - Power management - Communication interfaces Ideal candidates should have a strong background in motor control, sensor integration, and PCB design. Expertise in signal processing, power management, and designing communication interfaces ...

I'm looking for a skilled hardware designer to create a board for the STM32L031K6 microcontroller. The board will be used for prototyping, and needs to be compatible with the ST-Link V2 programmer. Key Requirements: - The board should include GPIO pins and Analog inputs/outputs. - The power source for the board will be USB, so it needs to be designed accordingly. Ideal Skills and Experience: - Extensive knowledge and experience in hardware design, particularly with STM32 microcontrollers. - Familiarity with ST-Link V2 programming. - Ability to design for USB power supply. - Good understanding of GPIO and Analog inputs/outputs. I need a professional who can ensure the board is designed efficiently for prototyping purposes.

I'm seeking a qualified professional to design an industrial electrical panel for automation systems. This project specifically entails: - Designing a robust and efficient electrical panel suitable for industrial use. - Incorporating PLC (Programmable Logic Controller) integration into the panel. Ideal candidates should have substantial experience in designing industrial electrical panels and integrating PLC systems. Familiarity with automation systems is a significant plus. Please provide a portfolio of similar projects you have completed.

I am seeking a highly skilled Technical Report Writer with experience in FPGA development, PCB design, and electronic hardware integration to document a comprehensive report on the LVDS to MIPI CSI-2 video stream conversion project.

I need a seasoned PCB designer to create a personal navigation device using an ESP32-S3. The low-power design will encompass various components such as a GPS, sensors buttons, and connectors. Key Features: - Incorporate ESP32 WROOM S3 and u-blox MAX-M10S GPS with chip antenna - Integrate a Speaker and 5 Pushbuttons - Include a Micro SD Card Slot and USB-C Connector - Have a Barometric Sensor, Accelerometer/Gyro, and Ambient Light Sensor - Implement a LoRA Radio and 4 connectors for battery & peripherals - Support LiPo charging and power management Board Dimensions: Approximately 44mm x 72mm Deliverables: - Altium Designer Schematic - Detailed Parts List (BOM) with supplier information - Altium Designer PCB Layout - Complete Fabrication data (Geber files etc) Key Requireme...

I'm looking for an experienced circuit designer to create a circuit for a Switching Mode Power Supply (SMPS) aimed at consumer electronics. Key Project Details: - The circuit is specifically for a 24V SMPS. - Power Rating 48 W , 2A - Use the IC DP2281 - Experience in designing circuits for consumer electronics is crucial. - Knowledge and experience working with SMPS circuits is a must. Your expertise in circuit design will be pivotal in ensuring the successful creation of this circuit. I look forward to your bids and hope to find a freelancer who can meet these requirements.

I'm looking for an experienced electronic engineer to modernize the circuit board of a Candlepin Bowling Pinsetter. The primary goal is to update the board and components to a smaller form factor while enhancing the overall efficiency of the system. Key Requirements: - Update the circuit board and components to a smaller, more compact form factor. - Improve the overall efficiency of the circuit board. Ideal Skills: - Expertise in circuit board design and modification. - Experience with consumer electronics. - Strong understanding of efficiency optimization techniques. Prior experience working with industrial control systems, particularly in consumer electronics like a bowling pinsetter, would be highly beneficial. A successful project will lead to a faster, more efficient pin sett...

I'm in need of an expert who can design a schematic for an electronic circuit. This is for a consumer electronics device and will include key features like sensor integration and DC motor control. Ideal skills and experience for the job: - Proficiency in electronic circuit design - Experience working with consumer electronics - Knowledge of DC motor control systems - Expertise in sensor integration - Familiarity with schematic design software Please provide examples of similar projects you've completed in your proposal.

I am in need of a revolutionary charging port that caters to the modern need of 'scattered chargers'. This port should be capable of universal compatibility, allowing it to charge a variety of devices without the need for multiple, separate chargers. It should also support quick charging for efficiency. Key Aspects: - Functionality: The charging port should be designed to eliminate the chaos of scattered chargers, making it easy and efficient to charge devices in one central location. - Compatibility: This port should be able to charge any device, regardless of brand or type. - Quick Charging: The port should support quick charging to meet the fast-paced needs of today's tech users. Ideal Skills: - Product design - Electrical engineering - Knowledge of charging technology...

I am in need of a skilled engineer or prototype developer who can construct a basic functional model of my patented concept (US patent Ser. no. US 12,017,735 B1). This handheld prototype must demonstrate the core functionality of the heating concept using a combination of a solid-state heater, ceramic, metal and various electronic components. Key Responsibilities: - Construct a basic functional model of my US patent. - Ensure the prototype is handheld and demonstrates heating. - Use of solid-state heater, ceramic, metal and electronic components. Ideal Skills and Experience: - Proven experience in prototype development. - Familiarity with handling solid-state heaters and ceramic. - Ability to create a basic functional model. - Previous work with heating prototypes is a plus. This is a...

I need an expert electronics engineer to design a WiFi module for me. Key Requirements: 1. The module must support Wi-Fi standards 802.11b, 802.11g, and 802.11n. 2. It should use UART or SPI as the host interface to enable communication with the host computer. 3. Use a SoC with integrated Wi-Fi and employ Altium Designer to create the electronic schematic diagram. 4. The software architecture should encompass a TCP/IP stack and a UART driver. 5. A detailed explanation of the operating mechanism of the designed system is required. Ideal Candidate: - Proficient in using Altium Designer. - Extensive experience in WiFi module and SoC design. - Strong understanding of Wi-Fi standards. - Capable of designing a comprehensive software architecture. Please provide your proposals if you meet the...

We are looking for an experienced professional or team to handle the full design, development, and prototyping of a hybrid DVD player with integrated Android functionality. The ideal candidate should have expertise in both hardware and software development and be able to deliver a fully functional prototype. --- Key Responsibilities 1. Hardware Development: Design a custom PCB to support both DVD functionality and Android integration. Create a hidden mechanism for SIM and SD card slots. Ensure compatibility with Wi-Fi and 5G connectivity. Build and test a fully functional prototype. 2. Software Development: Develop the Android system for the device, including Google Play Store integration. Configure the system to support apps like WhatsApp, with voice and air mo...

I need a PCB design expert to help me finalize my PCB design for production. The circuit sketches, dimensions, and component lists have already been prepared. Key Requirements: - Adherence to Standard Design Rules: The PCB should follow standard design rules without any high-density or high-frequency considerations. - Single Layer Design: This PCB will be a single layer. - Manual Routing: The PCB design requires manual routing, not auto-routing or a mix of both. Deliverables: - A .Pcb file that is ready for production Ideal Skills: - Proficiency in PCB design software - Experience with manual routing - Strong understanding of standard design rules

I'm in need of a skilled mechanical engineer specializing in design and drafting, specifically for prototyping purposes. The ideal freelancer for this project should have: - Extensive experience in design and drafting within the mechanical engineering field - A strong portfolio of successful prototyping projects - Excellent communication skills to understand and execute design specifications Please note that the specific software to be used for this project has not been predetermined. Flexibility and adaptability to different software will be appreciated.

I need an experienced PCB designer to route an existing PCB for me in EAGLE CAD. Key Project Details: - Size: The PCB is a medium size, specifically within the range of 2x2 to 4x4 inches. - Layers: It is a double-layered PCB. - Component Density: The design will have a medium density of components. Ideal candidates are those with prior experience in PCB design and routing, particularly using EAGLE CAD. A good understanding of double-layered PCB routing and medium component density layouts is crucial. Please include examples of similar projects you've completed in your proposal.

I'm looking for a designer who can create a two-way siren system for industrial use. The system must be able to communicate via radio and primarily serve the purpose of emergency alerts. Key Requirements: - 100m Range, - Ability to connect up to 30 devices - Each device has a siren and light - Battery (12v) powered - See on their video you can set the radio number for pairing - Disconnection warning The system will need to be robust enough for an industrial setting and capable of broadcasting emergency alerts. The power source for the sirens will be battery-powered, so considerations should be made for energy efficiency and battery life.

I'm looking for an expert in HDI grade PCB design for a compact 23mm x 11mm PCB. This design is intended for a consumer electronics device. Key Requirements: - The PCB needs to accommodate various components: Sensors, LEDs, FPGA, and Buffer memory. - Sequential illumination - The design should be suitable for indoor use only. Ideal Skills: - Proficiency in PCB design software. - Experience in designing PCBs for consumer electronics. - Familiarity with the integration of sensors, FPGAs, and buffer memory on PCBs. - Knowledge of HDI grade PCB design. Please provide relevant samples of your past work.

I'm looking for an expert in electrical engineering to design a circuit for a small wind turbine that will power a submersible fountain water pump. The maximum power output of my wind turbine is less than 20 watts. Key Tasks: - Design a circuit that can efficiently harness the wind turbine's power to operate a submersible pump. - Integrate an automatic on/off switch for the fountain water pump into the circuit. Ideal Skills: - Proficiency in circuit design, particularly for renewable energy sources. - Experience working with small wind turbines and submersible pumps. - Ability to design and integrate control systems into electrical circuits. Please ensure you are able to deliver a robust and reliable design, as this will be used to power a fountain in my garden.

I'm in need of a compact, battery-powered camera module and custom built microcontroller designed for eye-tracking. This module should: - Operate in infrared wavelengths - Connect to a small, custom-built microcontroller - Support wireless streaming of the camera feed - Provide 1080p quality video without auto-focus The camera will be situated near the eyes, so size and weight are critical considerations. The wireless communication protocol for this project is Wi-Fi, and the power source is a battery. Ideal candidates will have experience with camera module design, microcontroller integration, and wireless technology. Please note, the primary application for this camera has not been specified yet, so flexibility and adaptability will be key.

We are seeking a skilled freelancer to help design the schematic PCB circuit diagram and develop the firmware for a Smart Tree Pot device that integrates multiple sensors and displays 70+ expressions on a screen. The device will monitor various environmental factors such as moisture, temperature, light and respond with visual expressions on a display based on the sensor data. The goal of this project is to create a system where the tree pot responds interactively to its environment with a range of dynamic expressions, making the device not just functional but also visually engaging. Project Requirements: 1. PCB Circuit Design: o Design the schematic circuit diagram for the Smart Tree Pot. o Integrate sensors for soil moisture, temperature, light to monitor plant conditions. o Design an...